Search

Online monitoring of exhaled propofol concentration is important for anesthetists to provide adequate anesthesia as propofol concentrations in plasma and breath are correlated reasonably well. Exhaled propofol could be detected by 63Ni ion mobility spectrometry in negative ion mode; however, the radioactivity of 63Ni source restricts its clinical application due to safety, environmental, and regulatory concerns. An acetone-assisted negative photoionization ion mobility spectrometer (AANP-IMS) using a side-mounted vacuum ultraviolet (VUV) lamp in the unidirectional (UD) flow mode was developed for sensitive measurement of exhaled propofol by producing a high percentage of O2-(H2O)n. An adsorption sampling and time-resolved purge introduction system was developed to eliminate the interference of residual inhaled anesthetic sevoflurane based on their different adsorptions between propofol and sevoflurane on the inwall of the fluorinated ethylene propylene (FEP) sample loop. The effects of the inner diameter and the length of the sample loop on the signal intensity of propofol and the time-resolution between propofol and sevoflurane were theoretically and experimentally investigated. A sample loop with 3 mm i.d. and 150 cm length allowed sensitive measurement of exhaled propofol with a response time of 4 s, a linear response range for propofol was achieved to be 0.2 to 14 ppbv with a limit of detection (LOD) of 60 pptv, and the quantification of propofol was not influenced by the change of the sevoflurane concentration. Finally, the performance of monitoring exhaled propofol during surgery was demonstrated on a patient undergoing laparoscopic distal pancreatectomy combined with cholecystectomy. [ABSTRACT FROM AUTHOR]

Peroxide explosives, such as triacetone triperoxide (TATP) and hexamethylene trioxide diamine (HMTD), were often used in the terrorist attacks due to their easy synthesis from readily starting materials. Therefore, an on-site detection method for TATP and HMTD is urgently needed. Herein, we developed a stand-alone dopant-assisted positive photoionization ion mobility spectrometry (DAPP-IMS) coupled with time-resolved thermal desorption introduction for rapid and sensitive detection of TATP and HMTD in complex matrices, such as white solids, soft drinks, and cosmetics. Acetone was chosen as the optimal dopant for better separation between reactant ion peaks and product ion peaks as well as higher sensitivity, and the limits of detection (LODs) of TATP and HMTD standard samples were 23.3 and 0.2 ng, respectively. Explosives on the sampling swab were thermally desorbed and carried into the ionization region dynamically within 10 s, and the maximum released concentration of TATP or HMTD could be time-resolved from the matrix interference owing to the different volatility. Furthermore, with the combination of the fast response thermal desorber (within 0.8 s) and the quick data acquisition software to DAPP-IMS, two-dimensional data related to drift time (TATP: 6.98 ms, K0 = 2.05 cm2 V-1 s-1; HMTD: 9.36 ms, K0 = 1.53 cm2 V-1 s-1) and desorption time was obtained for TATP and HMTD, which is beneficial for their identification in complex matrices. [ABSTRACT FROM AUTHOR]