Search

This paper describes a novel strategy for fabricating the movable valve on paper-based microfluidic devices to manipulate capillary-driven fluids. The movable valve fabrication is first realized using hollow rivets as the holding center to control the paper channel in different layer movement that results in the channel's connection or disconnection. The relatively simple valve fabrication procedure is robust, versatile, and compatible with microfluidic paper-based analytical devices (μPADs) with differing levels of complexity. It is remarkable that the movable valve can be convenient and free to control fluid without the timing setting, advantages that make it user-friendly for untrained users to carry out the complex multistep operations. For the performance of the movable valve to be verified, several different designs of μPADs were tested and obtained with satisfactory results. In addition, in the proof-of-concept enzyme-linked immunosorbent assay experiments, we demonstrate the use of these valves in μPADs for the successful analysis of samples of carcino-embryonic antigen, showing good sensitivity and reproducibility. We hope this technique will open new avenues for the fabrication of paper-based valves in an easily adoptable and widely available way on μPADs and provide potential point-of-care applications in the future.

Paper substrates have been widely used to construct point-of-care lateral flow immunoassay (LFIA) diagnostic devices. Paper based microfluidic devices are robust and relatively simple to operate, compared to channel microfluidic devices, which is perhaps their greatest advantage and the reason they have reached a high level of commercial success. However, paper devices may not be well suited for integrated sample preparation, such as sample extraction and preconcentration, which is required in complex samples with low analyte concentrations. In this study, we investigate integration of isotachophoresis (ITP), an electrokinetic preconcentration and extraction technique, onto nitrocellulose-based paper microfluidic devices with the goal to improve the limit of detection of LFIA. ITP has been largely used in traditional capillary based microfluidic devices as a pretreatment method to preconcentrate and separate a variety of ionic compounds. Our findings show that ITP on nitrocellulose is capable of up to a 900 fold increase in initial sample concentration and up to 60% extraction from 100 μL samples and more than 80% extraction from smaller sample volumes. Paper based ITP is challenged by Joule heating and evaporation because it is open to the environment. We achieved high preconcentration by mitigating evaporation induced dispersion using novel cross-shaped device structures that keep the paper hydrated. We show that ITP on the nitrocellulose membrane can be powered and run several times by a small button battery suggesting that it could be integrated to a portable point-of-care diagnostic device. These results highlight the potential of ITP to increase the sensitivity of paper based LFIA under conditions where small analyte concentrations are present in complex biological samples.

This article describes a prototype system for quantifying bioassays, and for exchanging the results of the assays digitally with physicians located off-site. The system uses paper-based microfluidic devices for running multiple assays simultaneously, camera phones or portable scanners for digitizing the intensity of color associated with each colorimetric assay, and established communications infrastructure for transferring the digital information from the assay site to an off-site laboratory for analysis by a trained medical professional; the diagnosis then can be returned directly to the healthcare provider in the field. The microfluidic devices were fabricated in paper using photolithography, and were functionalized with reagents for colorimetric assays. The results of the assays were quantified by comparing the intensities of the color developed in each assay with those of calibration curves. An example of this system quantified clinically relevant concentrations of glucose and protein in artificial urine. The combination of patterned paper, a portable method for obtaining digital images, and a method for exchanging results of the assays with off-site diagnosticians offers new opportunities for inexpensive monitoring of health, especially in situations that require physicians to travel to patients (e.g., in the developing world, in emergency management, and during field operations by the military) to obtain diagnostic information that might be obtained more effectively by less valuable personnel.