Search

A novel "one-pot" approach was developed for ultrarapid preparation of various hybrid monolithic columns in UV-transparent fused-silica capillaries via photoinitiated thiol-acrylate polymerization of an acrylopropyl polyhedral oligomertic silsesquioxane (acryl-POSS) and a monothiol monomer (1-octadecanethiol or sodium 3-mercapto-1-propanesulfonate) within 5 min, in which the acrylate not only homopolymerizes, but also couples with the thiol. This unique combination of two types of free-radical reaction mechanisms offers a simple way to fabricate various acrylate-based hybrid monoliths. The physical characterization, including scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and thermal gravimetric analysis was performed. The results indicated that the monothiol monomers were successfully incorporated into acryl-POSS-based hybrid monoliths. The column efficiencies for alkylbenzenes on the C18-functionalized hybrid monolithic column reached to 60 000-73 500 plates/m at the velocity of 0.33 mm/s in capillary liquid chromatography, which was far higher than that of previously reported POSS-based columns prepared via thermal-initiated free-radical polymerization without adding any thiol monomers. By plotting the plate height (H) of the alkylbenzenes versus the linear velocity (u) of the mobile phase, the results revealed a retention-independent efficient performance of small molecules in the isocratic elution. These results indicated that more homogeneous hybrid monoliths formed via photoinitiated thiol-acrylate polymerization; particularly, the use of the multifunctional cross-linker possibly prevented the generation of gel-like micropores, reducing mass transfer resistance (C-term). Another sulfonate-containing hybrid monolithic column also exhibited hydrophobicity and ion-exchange mechanism, and the dynamic binding capacity was calculated as 71.1 ng/cm (75 μm i.d.).

In the present study, we introduce two-photon excitation at 532 nm for label-free fluorescence detection in chip electrochromatography. Two-photon excitation at 532 nm offers a promising alternative to one-photon excitation at 266 nm, as it enables the use of economic chip materials instead of fused silica. In order to demonstrate these benefits, one-photon and two-photon induced fluorescence detection are compared in different chip layouts and materials with respect to the achievable sensitivity in the detection of polycyclic aromatic hydrocarbons (PAHs). Customized chromatography chips with cover or bottom slides of different material and thickness are produced by means of a rapid prototyping method based on liquid-phase lithography. The design of thin bottom chips (180 μm) enables the use of high-performance immersion objectives with low working distances, which allows one to exploit the full potential of two-photon excitation for a sensitive detection. The developed method is applied for label-free analysis of PAHs separated on a polymer monolith inside polymer glass sandwich chips made from fused silica or soda-lime glass. The obtained limits of detection range from 40 nM to 1.95 μM, with similar sensitivities in fused silica thin bottom chips for one-photon and two-photon excitation. In deep-UV non- or less-transparent devices two-photon excitation is mandatory for label-free detection of aromatics with high sensitivity.

It is demonstrated that 5 μm i.d. capillaries can be coated with mesoporous silica layers up to 550 nm thickness. All the columns produced using in-column sol–gel synthesis with tetramethoxysilane provide plate height curves that closely follow the Golay-Aris theory. In 60 cm long columns, efficiencies as high as N = 150 000 and N = 120 000 were obtained, respectively, for a 300 and 550 nm thick porous layer. An excellent retention and plate height reproducibility was obtained when the recipes were subsequently applied to produce very long (1.9 and 2.5 m) capillaries. These columns produced efficiencies up to N = 600 000 plates for a retained and around N = 1 000 000 plates for an unretained component. Given the good reproducibility on the long capillaries, and considering that mesoporous silica is still the preferred support for LC, it is believed the present study could spur a renewed interest in open-tubular LC.

A novel kind of aptamer modified organic-inorganic hybrid silica monolithic capillary column has been developed, via the covalent bonding of 5'-NH(2)-modified aptamer for human α-thrombin on hybrid silica monolith, prepared by sol-gel method, with tetraethoxysilane and 3-aminopropyltriethoxysilane as precursors. Due to the large specific surface area of the hybrid matrix, the average coverage density of aptamer reached 568 pmol/μL, and the thrombin binding capacity was 1.15 μg/μL, 14 times higher than that of aptamer modified open tubular capillaries. By such an affinity capillary column, the limit of detection of thrombin was decreased to 3.4 nM with a UV detector. Furthermore, even when thrombin was mixed with 1000 times more concentrated human serum, it could be selectively enriched and detected with the signal-to-noise ratio as ca.10. These results indicate that the developed preparation strategy for aptamer based hybrid silica monolithic capillary column might provide an effective method to achieve highly selective recognition of trace targets.

A simple single-step thermal-treatment "one-pot" approach for the preparation of organic-silica hybrid capillary monolithic columns is described. In this improved method, the cross-linker vinyltrimethoxysilane (VTMS) was replaced by 3-methacryloxypropyltrimethoxysilane (γ-MAPS), which is more active in polymerization reactions, and only one thermal treatment step was required in the preparation of hybrid monoliths. Two zwitterionic organic-silica monolithic columns were successfully synthesized by using [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (MSA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) as the organic monomers. The effects of the tetramethoxysilane (TMOS)/γ-MAPS molar ratio, content of monomer, composition of porogenic solvent, and reaction temperature on the morphologies of the hybrid monoliths were investigated. The MSA-silica and MPC-silica hybrid monolithic columns exhibited good permeability and good mechanical stability. The monolithic columns were used for the separation of polar compounds by capillary hydrophilic-interaction chromatography (cHILIC). A typical HILIC retention mechanism was observed at higher organic solvent contents (>50% ACN). The MSA monoliths were further investigated in the separation of various neutral, basic, and acidic analytes, as well as small peptides, by capillary liquid chromatography (cLC), and high efficiency and satisfactory reproducibility were achieved. In addition, the analysis of a tryptic digest of bovine serum albumin (BSA) by cLC tandem mass spectrometry (cLC-MS/MS) with an MSA monolith further demonstrated its potential in the separation of biological samples.

Silica colloidal crystals formed from 330 nm nonporous silica spheres inside of 75 μm i.d. fused silica capillaries were evaluated for the efficiency of capillary electrochromatography of proteins. Three proteins, ribonuclease A, cytochrome C, and lysozyme, each covalently labeled with fluorophor, were well separated over a distance of 1 cm by isocratic electromigration, using 40:60 acetonitrile/water with 0.1% formic acid. A van Deemter plot showed that the plate height for lysozyme, which was the purest of the three proteins, was diffusion-limited for electric fields ranging from 400 to 1400 V/cm. The plate height for lysozyme was below 50 nm at almost all of the migration velocities, and it approached 10 nm at the highest velocity. Eddy diffusion was negligible. Lysozyme migrated over a 12 mm separation length with more than 10(6) plates in 1.5 min. These results indicate that silica colloidal crystals are well suited for electrically driven separations of large, highly charged analytes such as proteins. The 10(6) plates observed for a separation length of barely more than a centimeter means they are potentially valuable for miniaturized separations in microchip and lab-on-a-chip devices.

The rapid separation of mixtures of six peptides using porous polymer monolithic layers in electrophoresis and pressurized planar electrochromatography modes has been achieved. The separations in the former mode were performed on a generic hydrophobic poly(butyl methacrylate-co-ethylene dimethacrylate) layer with no ionizable functionalities and required 2 min. This layer also enabled the separation of three oligonucleotides. The separation in the pressurized planar electrochromatographic mode was carried out using a negatively charged layer prepared via cografting of 2-acrylamido-2-methyl-1-propanesulfonic acid and 2-hydroxyethyl methacrylate on top of the generic hydrophobic monolith and was completed in 1 min.

This work for the first time combines three on-capillary detection methods, namely, capacitively coupled contactless conductometric (C(4)D), photometric (PD), and fluorimetric (FD), in a single (identical) point of detection cell, allowing concurrent measurements at a single point of detection for use in capillary electrophoresis, capillary electrochromatography, and capillary/nanoliquid chromatography. The novel design is based on a standard 6.3 mm i.d. fiber-optic SMA adapter with a drilled opening for the separation capillary to go through, to which two concentrically positioned C(4)D detection electrodes with a detection gap of 7 mm were added on each side acting simultaneously as capillary guides. The optical fibers in the SMA adapter were used for the photometric signal (absorbance), and another optical fiber at a 45 degrees angle to the capillary was applied to collect the emitted light for FD. Light emitting diodes (255 and 470 nm) were used as light sources for the PD and FD detection modes. LOD values were determined under flow-injection conditions to exclude any stacking effects: For the 470 nm LED limits of detection (LODs) for FD and PD were for fluorescein (1 x 10(-8) mol/L) and tartrazine (6 x 10(-6) mol/L), respectively, and the LOD for the C(4)D was for magnesium chloride (5 x 10(-7) mol/L). The advantage of the three different detection signals in a single point is demonstrated in capillary electrophoresis using model mixtures and samples including a mixture of fluorescent and nonfluorescent dyes and common ions, underivatized amino acids, and a fluorescently labeled digest of bovine serum albumin.

Incorporation of nanofluidic elements into microfluidic channels is one approach for adding filtration and partition functionality to planar microfluidic devices, as well as providing enhanced biomolecular separations. Here we introduce a strategy to pack microfluidic channels with silica nanoparticles and microbeads, thereby indirectly producing functional nanostructures; the method allows selected channels to be packed, here demonstrated so that a separation channel is packed while keeping an injection channel unpacked. A nanocapillary array membrane is integrated between two patterned microfluidic channels that cross each other in vertically separated layers. The membrane serves both as a frit for bead packing and as a fluid communication conduit between microfluidic channels. Centrifugal force-assisted sedimentation is then used to selectively pack the microfluidic channels using an aqueous silica bead suspension loaded into the appropriate inlet reservoirs. This packing approach may be used to simultaneously pack multiple channels with silica microbeads having different sizes and surface properties. The chip design and packing method introduced here are suitable for packing silica particles in sizes ranging from nanometers to micrometers and allow rapid (approximately 10 min) packing with high quality. The liquid/analyte transport characteristics of these packed micro/nanofluidic devices have potential utility in a wide range of applications, including electroosmotic pumping, liquid chromatographic separations, and electrochromatography.

A new approach based on miniemulsion polymerization is demonstrated for synthesis of molecularly imprinted nanoparticles (MIP-NP; 30–150 nm) with “monoclonal” binding behavior. The performance of the MIP nanoparticles is characterized with partial filling capillary electro-chromatography, for the analysis of rac-propranolol, where (S)-propranolol is used as a template. In contrast to previous HPLC and CEC methods based on the use of MIPs, there is no apparent tailing for the enantiomer peaks, and baseline separation with 25 000–60 000 plate number is achieved. These effects are attributed to reduction of the MIP site heterogeneity by means of peripheral location of the core cross-linked NP and to MIP-binding sites with the same ordered radial orientation. This new MIP approach is based on the substitution of the functional monomers with a surfactant monomer, sodium N-undecenoyl glycinate (SUG) for improved inclusion in the MIP-NP structure and to the use of a miniemulsion in the MIP-NP synthesis. The feasibility of working primarily with aqueous electrolytes (10 mM phosphate with a 20% acetonitrile at pH 7) is attributable to the micellar character of the MIP-NPs, provided by the inclusion of the SUG monomers in the structure. To our knowledge this is the first example of “monoclonal” MIP-NPs incorporated in CEC separations of drug enantiomers.

The Triton X (TX)-series are alkylphenol polyethoxylates -type nonionic surfactants of varying numbers of ethylene oxide units. Applications include industrial and household detergent formulations as well as emulsifying agents. For analysis of these surfactants, capillary electrochromatography-electrospray ionization-mass spectrometry (CEC-ESI-MS) offers several unique advantages over the traditional hyphenation methods based on HPLC-MS. These include higher plate numbers attainable in CEC-MS, as well as more compatible flow rate (submicroliter) when coupled to ESI-MS and, perhaps most importantly, less consumption of toxic and costly organic solvents. In this work, different CEC-ESI-MS parameters such as mobile-phase composition, sheath liquid, and spray chamber parameters were optimized to provide suitable and sensitive analysis of short-, medium-, and long-chain length (e.g., n = 1-16) TX-series nonionic surfactants. The optimized CEC-ESI-MS conditions were mobile phase containing 90/10 ACN/2.5 mM Tris, pH 8, sheath liquid containing 50/50 MeOH/10 mM HCO(2)NH(4) delivered at 5 microL/min, spray chamber set to drying gas flow of 6 mL/min, nebulizer pressure of 5 psi, and drying gas temperature set to 200 degrees C. This optimization is followed by the more challenging separation of very long chain TX-series with a large number (n = 30-70) of ethoxy units, which were initially found to exhibit extreme retention using the developed method. It was observed that through the addition of small volume fraction of polar-aprotic tetrahydrofuran solvent to the running buffer, the retention time could be significantly reduced thus enhancing the feasibility for CEC-ESI-MS analysis of these very long chain nonionic surfactants for the first time. The detection limit was approximately 37 microg/mL total octylphenol ethoxylate for TX-45; acceptable precision of migration time (

Large perfusive silica beads (particle size 110 microm, through pore approximately 2 microm) held in place by the keystone effect were used as single-particle frits for the manufacture of particulate packed capillary columns. High-quality capillary electrochromatographic separations of a standard test mixture of alkylbenzenes were obtained over the full voltage range of 5-30 kV, with no requirement for pressurization. Excellent robustness was demonstrated by the reproducibility of migration times, peak efficiencies, and resolution during 100 consecutive runs at the highest voltage (30 kV) without thermostating and pressurization. Superior performance relative to traditional sinter-fritted columns is ascribed to the heat-free fritting process and short frit length of approximately 110 microm.

Fritless packed beds comprised of magnetically responsive octadecylsilane bonded silica particles have been constructed for reversed-phase electrochromatography. The magnetic particles were immobilized in the capillary by applying an external magnetic field transverse to the direction of electroosmotic flow. Being subjected to the interplay of fluid dragging and magnetic forces, the initial loosely packed particle assembly was compacted into a uniform packing structure. The magnetically immobilized beds obtained were used as stationary phases for separation of neutral compounds, with retention behavior and column efficiency similar to those of slurry-packed columns. The results suggest that the magnetic attraction approach to fritless column packing may be used for construction of advanced chip-based chromatography, especially in complex architectures comprising curved and intersecting channels.

A novel fritless capillary column for capillary electrochromatography (CEC) has been developed. The ODS microspheres were packed into a capillary and were then immobilized within an organic polymer prepared in situ through a photopolymerization process. The entrapment conditions were investigated to minimize the effect of the polymer matrix on the chromatographic properties of the packing material. The organic polymer matrix in the microsphere-packed column functions to link microspheres at specific sphere-sphere and sphere-capillary contact points. CEC separations of a PAH test mixture using entrapped columns with different UV illumination times were compared in terms of retention factor and separation efficiency. The optimized entrapped column demonstrated better chromatographic performance than similarly packed columns with conventional inlet and outlet frits. The electrochromatographic separations of hormones and peptides were also demonstrated on entrapped ODS columns.

A method for preparation of molecularly imprinted polymer (MIP) derivatized onto the surface of a monolithic silica capillary column was successfully developed. The vinyl groups were first introduced onto the silica monolith by immobilization of gamma-methacryloxypropyltrimethoxysilane. Then the MIP coating was copolymerized and anchored onto the surface of the silica monolith. Acetonitrile was selected as porogen (solvent). The other preparation conditions, such as monomer concentration, temperature, and time of polymerization, were systematically studied. The obtained MIP-derivatized silica monolith using l-tetrahydropalmatine (l-THP) and (5S,11S)-(-)-Tröger's base (S-TB) as the imprinted template, respectively, was characterized in terms of the retention behavior of thiourea and toluene. Under the optimized CEC conditions, baseline enantioseparations of THP and TB were achieved in 4 min though the effective length of the columns was 8.5 cm. The result indicates that enough recognition sites were on the surface of silica monolith, resulting in strong recognition ability. Compared with a MIP organic monolith, the MIP-derivatized silica monolith exhibits better column efficiency and stability in CEC. Additionally, the comparison of these two kinds of monolithic columns was performed by capillary liquid chromatography. The separation on MIP-derivatized silica monolith was superior to that on the organic monolith.

Benzo[a]pyrene, one of the most carcinogenic PAHs, has 12 monomethylated positional isomers (MBAPs). A strong correlation between the carcinogenicity of these isomers and methyl substitution has been reported. In this study, on-line coupling of capillary electrochromatography (CEC) and atmospheric pressure photoionization mass spectrometry (APPI-MS) provides a unique solution to highly selective separation and sensitive detection of MBAP isomers. The studies indicated that APPI provides significantly better sensitivity compared to electrospray ionization and atmospheric pressure chemical ionization modes of MS. A systematic investigation of APPI-MS detection parameters and CEC separation is established. First, several sheath liquid parameters (including type and concentration of volatile buffers, type and content of organic modifiers, use of dopants and inorganic/organic additives, and sheath liquid flow rate) and APPI-MS spray chamber parameters (capillary voltage, vaporizer temperature, nebulizer pressure) were found to have effects on detection sensitivity as well as the profile of mass spectrum. For example, when ammonium acetate was replaced with acetic acid in the sheath liquid, the MS signal was enhanced as much as 90% and the formation of ammonia adduct was effectively suppressed. Next, the separation of MBAP isomers was conducted on internal tapered columns packed with polymeric C18 stationary phase. With the use of a mobile phase consisting of slightly higher acetonitrile content (90%,v/v) and a small amount of tropylium ion, the analysis times were significantly shortened by 20 min without compromising the resolutions between the isomers. Finally, quantitative aspects of the CEC-APPI-MS method were demonstrated using 7-MBAP as the internal standard. The calibration curves of three of the most carcinogenic isomers, namely, 1-MBAP, 3-MBAP, and 11-MBAP, showed good linearity in the range of 2.5-50 microg/mL with a limit of detection at 400 ng/mL.

This work identifies electrical field-induced concentration polarization (CP) as a key physical mechanism influencing the retention behavior of charged analytes in electrochromatography with fixed beds of porous adsorbent particles. Due to an insufficient screening of intraparticle surface charge, under most general conditions the porous (permeable) particles become charge-selective. CP is caused by coupled mass and charge transport normal to the charge-selective external surface of the permeable particles, which leads to concentration gradients of ionic species in the adjoining interparticle electrolyte solution. Cation-exchange (cation-selective) particles were employed to investigate the influence of applied voltage on the retention factor of counterionic, i.e., positively charged, analytes. It is demonstrated by macroscopic retention data and microscopic studies resolving the CP phenomenon on a particle scale that the dependence of CP on electrical field and mobile-phase ionic strengths is directly reflected in concomitant changes of analyte retention. The CP zones that develop at the interface between interparticle and intraparticle pore space are recognized by charged, but not electroneutral analytes while entering or leaving the particles. The intensity of these convective-diffusion boundary layers (CP zones) depends on the applied field strength and charge selectivity of a particle. Thus, it is the charge-selective transport between the interparticle and intraparticle pore space in packed beds that prevails under typical experimental conditions in electrochromatography and that forms the physical basis for a general electrical field dependence of the retention factor of charged analytes.

A novel, open tubular capillary electrochromatographic method was developed for the in vitro oxidation of low-density lipoprotein (LDL) particles. Low-density lipoprotein particles with molar mass of approximately 2.5 MDa yielded a stable stationary phase at temperatures 25 and 37 degrees C and at pH values from 3.2 to 7.4. The quality of the coatings was not influenced by variations in the LDL concentration in the coating solutions (within the range of 2-0.015 mg/mL) with the coating procedure used in the study. Radiolabeled LDL stationary phases and scanning electron microscopy, employed to shed light on the location and coating density of LDL particles on the inner surface of the capillary wall, confirmed the presence of an LDL monolayer and almost 100% coating efficiency (99 +/- 8%). In addition, the radioactivity measurements allowed estimation of the amount of LDL present in a single capillary coating. Capillaries coated with human LDL particles were submitted to different oxidative conditions by changing the concentration of the oxidant (CuSO4), oxidation time, pH value, and temperature. The oxidation procedure was followed with electroosmotic flow mobility, which served as an indicator of the increase in total negative charges of LDL coatings, and by asymmetrical field flow fractionation, which measured the changes in size of the lipoprotein particles. The results indicated that oxidation of LDL was progressing with increasing time, temperature, and concentration of the oxidant as expected. The oxidation process was faster around neutral pH values (pH 6.5-7.4) and inhibited at acidic pH values (pH 5.5 and lower).

In this study, we report a novel procedure for fabricating internally tapered capillary columns suitable for the coupling of capillary electrochromatography (CEC) to electrospray mass spectrometry (ESI-MS). The internal tapers were prepared by slowly heating the capillary end in a methane/O2 flame. Due to continuous self-shrinking of the inner channel of the capillary, the inside diameter of the opening was reduced to 7-10 microm. The procedure is easy to handle, with no requirement for expensive equipment as well as elimination of problematic grinding of the tip. Several advantages of these new internal tapers, as compared to using externally tapered columns, are described. First, the problems of poor durability and tip breakage associated with external tapering were successfully overcome with the internal taper. A comparison of the online CEC/ESI-MS between external versus internal tapers showed that the latter provides enhanced electrospray stability, resulting in significantly lower short-term noise and very short-term noise values. In turn, the more rugged design of internal tapers allows performing CEC/MS utilizing a harsh polar organic mobile phase, which was not previously successful using an external taper due to higher operating current and electrospray arcing. Next, data on the reproducibility of the internally tapered CEC/MS column using warfarin and beta-blockers as model analytes are presented. For example, when comparing the reproducibility for separation of warfarin under reversed-phase conditions, the internal taper demonstrated superior intraday % RSD (1.6-3.4) as compared to the external taper intraday % RSD (5-6). Last, the applicability of performing quantitative CEC/MS with internally tapered capillaries is demonstrated for simultaneous enantioseparation of beta-blockers. Impressive quantitative results include good linearity of calibration curves (e.g., R2 = 0.9940-0.9988) and limit of detection as low as 30 nM. The sensitive detection of a minor impurity of one enantiomer at the 0.1% level in a major chiral entity buttresses the suitability of compliance with FDA guidelines.

A sulfonated methacrylate monolithic polymer has been synthesized inside fused-silica capillaries of diameters 50-533-microm i.d. and coated with 65-nm-diameter fully functionalized quaternary ammonium latex particles (AS18, Dionex Corp.) to form an anion-exchange stationary phase. This stationary phase was used for ion-exchange capillary electrochromatography of inorganic anions in a 75-microm-i.d. capillary with Tris/perchlorate electrolyte and direct UV detection at 195 nm. Seven inorganic anions (bromide, nitrate, iodide, iodate, bromate, thiocyanate, chromate) could be separated over a period of 90 s, and the elution order indicated that both ion exchange and electrophoresis contributed to the separation mechanism. Separation efficiencies of up to 1.66 x 10(5) plates m(-1) were achieved, and the monoliths were stable under pressures of up to 62 MPa. Another latex-coated monolith in a 250-microm-i.d. capillary was used for in-line preconcentration by coupling it to a separation capillary in which the EOF had been reversed using a coating of either a cationic polymer or cationic latex particles. Several capillary volumes of sample were loaded onto the preconcentration monolith, and the analytes (inorganic anions) were then eluted from the monolith with a transient isotachophoretic gradient before being separated by electrophoresis in the separation capillary. Linear calibration curves were obtained for aqueous mixtures of bromide, nitrite, nitrate, and iodide. Recoveries of all analytes except iodide were reduced significantly when the sample matrix contained high levels of chloride. The preconcentration method was applied to the determination of iodide in open ocean water and provided a limit of detection of 75 pM (9.5 ng/L) calculated at a signal-to-noise ratio of 3. The relative standard deviation for migration time and peak area for iodide were 1.1 and 2.7%, respectively (n = 6). Iodide was eluted as an efficient peak, yielding a separation efficiency of 5.13 x 10(7) plates m(-1). This focusing was reproducible for repeated analyses of seawater.

Pressurized capillary electrochromatography (pCEC) was coupled with electrospray ionization mass spectrometry (ESI-MS) using a coaxial sheath liquid interface. It was used for separation and analysis of peptides and proteins. The effects of organic modifier and applied voltage on separation were investigated, and the effects of pH value of the mobile phase and the concentration of the electrolyte on ESI-MS signal were investigated. The resolution and detection sensitivity with different separation methods (pCEC, capillary high-performance liquid chromatography) coupled on-line with mass spectrometry were compared for the separation of a peptide mixture. To evaluate the feasibility and reliability of the experimental setup of the system, tryptic digests of cytochrome c and modified protein as real samples were analyzed by using pCEC-ESI-MS.

Pressurized planar electrochromatography (PPEC) is a new planar chromatographic technique in which the mobile phase is driven by electroosmotic flow, while the sorbent layer is pressurized in a manner that allows heat to flow from the layer through an electrically insulating, thermally conducting, sheet of aluminum nitride ceramic. A prototype apparatus for performing PPEC is described. Separation by PPEC is faster than by conventional TLC, and an example is presented of a 24-fold enhancement in the speed of separation. PPEC was performed on both regular and high-performance C18 layers, and the latter yield substantially faster separation. The sorbent layer requires conditioning at elevated temperature before use, and solute migration velocity increases with this temperature. The flow rate increases in a linear manner with increasing voltage and diminishes in a nonlinear manner with increasing pressure. Both electrical current and Joule heating diminish with increasing pressure, and the diminution of flow at high pressure can be compensated by an increase in voltage. PPEC is more efficient than classical TLC. Theoretical plate heights diminish with increasing Rf and are in the range 29-21 and 55-27 microm for the high-performance and regular plates, respectively. PPEC retains the advantages of classical TLC but has the ability to separate a substantially higher number of samples simultaneously. An example is presented on the separation of nine samples in 1 min on a 2.5 cm x 10 cm sorbent layer.

Two sets of peptides, each having structurally similar amino acid sequences, have been investigated by capillary electrochromatography (CEC) using etched chemically modified capillaries as the separation medium. In comparison to gradient RP-HPLC, the resolving power of the described CEC methods has been found to be superior. A number of variables have been examined with respect to optimization of the separation of these closely related peptides with several different etched chemically modified capillaries. These experimental variables included the nature of the bonded moiety, the pH, the organic modifier type, and the amount of organic modifier in the buffer electrolyte. Systematic variation of these parameters results in significant changes in the migrational behavior of the investigated peptides and provides important insight into the underlying molecular separation processes that prevail in open tubular CEC. Moreover, under optimized conditions, efficient separations characterized by highly symmetrical peaks were achieved. In addition, this study has permitted the long-term stability as well as the short-term and long-term reproducibility of the etched chemically modified capillaries to be documented.

Aptamers are oligonucleotides that are isolated and amplified on the basis of their recognition of a target molecule. In this study, an RNA aptamer isolated and amplified on the basis of its affinity for flavin mononucleotide (FMN) was covalently bound to the inner walls of fused-silica capillaries. This aptamer recognizes the flavin moiety of both FMN and flavin adenine dinucleotide (FAD). When an attempt was made to evaluate these capillaries according to existing theory, the theory proved to be insufficient. We describe a new method to evaluate capillaries for use in open-tubular capillary electrochromatography (OTCEC) of charged analytes, which combines OTCEC and flow-counterbalanced capillary electrophoresis. This method enabled us to extract k' and evaluate k(CEC) values for these capillaries, and the dependence of these values on Mg(2+) concentration was explored. The k' values for these capillaries ranged from 0.0951 to 0.2530 and from 0.0255 to 0.1118 for FMN and FAD, respectively.

To expand the applications of the on-line preconcentration technique with capillary electrochromatography (CEC) to biogenic amines that have no specific chromophore or fluorophore in their molecules, a method of on-line preconcentration prior to on-column derivatization CEC is presented. A monolithic ODS capillary column (20 cm effective length x 75 microm i.d.) for CEC was fabricated using a thermal sol-gel reaction of tetraethyl orthosilicate to capture ODS particles (5-microm particle diameter) in a capillary tube. A standard model biogenic amine solution consisting of histamine, methylhistamine, and serotonin was electrokinetically injected from the anodic site of the capillary column with 5 kV, and these amines were effectively concentrated at the inlet site of the capillary column by a field-amplified sample stacking, a gradient effect mode, or both. This preconcentration occurred whenever the several types of solvent for reconstitution of the amines, e.g., water (noneluting solvent or low-conductivity solvent), 0.9% sodium chloride (noneluting solvent or high-conductivity solvent), or 60% acetonitrile in 10 mM borate buffer (pH 10) (eluting solvent) were employed. After concentration, the amines were subsequently derivatized, separated, and detected during CEC with an optimum CEC run buffer solution containing 60% acetonitrile in 5 mM o-phthalaldehyde/2-mercaptoethanol-10 mM borate buffer (pH 10) when 5 kV was continuously applied. Using the present system, equipped with a fluorescence detector instead of a UV/visible detector, the detection sensitivity for amines reached a 0.1 microM level, which increased sensitivity by a factor of 10(3) times greater than that of normal on-column derivatization CEC.

A rotary valve nanoinjector was devised for use in capillary electrophoresis (CE) and capillary electrochromatography (CEC). A fused-silica capillary tip was inserted in a small through-hole in the rotor. The narrow and short capillary tip, with an inner volume of 6-24 nL, was embedded in the hole using epoxy resin. The injection volume was confirmed chromatographically by comparing the peak areas obtained with the nanoinjector to those of a conventional injector. In addition, both the rotor and stator of the injector were made of a nonconducting material, polyimide resin, to be utilized for CE and CEC. The application of the nanoinjector for CE was demonstrated.

A phenomenon was found whereby the application of an alternating voltage to a capillary column can vary the capacity factor of a sample solute. The alternating voltage-induced variation in the capacity factor was studied using an anion exchange mini-bed (a short capillary column 12 mm long). The capacity factor varied according to both the amplitude and frequency of an applied alternating voltage. The variation greatly depended on the kinds of sample solutes and packing materials. A new separation mode for capillary electrochromatography using an alternating voltage, that is, alternating voltage capillary electrochromatography (AV-CEC), was proposed as an application of this phenomenon to control the retention of a sample solute. The chromatographic behavior of three organic acids (benzoic acid, phthalic acid, and salicylic acid) was studied in AV-CEC using an anion exchange column.

Application of electrokinetic forces to drive the mobile phase diminishes analyte dispersion in open-channel liquid chromatographic columns due to minimization of shear in the flow field. However, the retentive layer coating the inner walls of such devices slows down the average convective velocity of solute molecules in its vicinity, inherently causing dispersion of analyte bands. In this article, we explore the possibility of reducing such dispersion in electrochromatographic columns by imposing a pressure-driven back flow in the system. Analysis shows that although such a strategy introduces shear in the flow field, the overall dispersion in the mobile phase is reduced. This occurs as the streamline velocity in such a system is greater near the channel walls than that in the center of the conduit, thereby allowing fluid dispersion to counteract wall retention effects. For an optimally chosen magnitude of the back flow, hydrodynamic dispersion of any target species in the mobile phase may be shown to diminish by a factor of 3 and 10/3 in a circular tube and a parallel-plate geometry, respectively. A similar reduction in slug dispersion is also realized in rectangular conduits for all aspect ratios. In trapezoidal geometries with large wedge angles or isotropically etched profiles, this reduction factor may attain values of 10 or greater.

Microfabricated devices integrating sample filtration, solid-phase extraction, and chromatographic separation with solvent programming were demonstrated. Filtering of the sample was accomplished at the sample inlet with an array of seven channels each 1 microm deep and 18 microm wide. Sample concentration and separation were performed on channels 5 microm deep and 25 microm wide coated with a C18 phase, and elution was achieved under isocratic, step, or linear gradient conditions. For the solid-phase extraction, signal enhancement factors of 400 over a standard injection of 1.0 s were observed for a 320-s injection. Four polycyclic aromatic compounds were resolved by open channel electrochromatography in under 50 s. Chip operation was unaffected by the presence of the 5-microm silica particles at the filter entrance.

To deal with the complexity of the glycan mixtures released from glycoproteins, an efficient form of micro-column separations, capillary electrochromatography, has been combined with high-performance mass spectrometry (Fourier transform ion cyclotron resonance). Contour plots have been generated from the mixtures of O-linked oligosaccharides originated from bovine mucin and bile salt-stimulated lipase, a large glycoprotein enzyme.

Two novel types of substituted cyclam-capped beta-cyclodextrin (beta-CD)-bonded silica particles have been prepared and used as chiral stationary phases in capillary electrochromatography (CEC). The two stationary phases have a chiral selector with three recognition sites: beta-CD, cyclam, and the latter's sidearm. They exhibit excellent enantioselectivities in CEC for a wide range of compounds as a result of the cooperative functioning of the anchored beta-CD and cyclam. After inclusion of the metal ion (Ni2+) from the running buffer into the substituted cyclams and their sidearm ligands, the bonded stationary phases become positively charged and can provide extra electrostatic interactions with ionizable solutes and enhance the dipolar interactions with some polar neutral solutes. This enhances the host-guest interaction with some solutes and improves chiral recognition and enantioselectivity. These new types of stationary phases exhibit great potential for fast chiral separations in CEC.

An experimental study has been performed on electroosmotic flow (EOF) development in packed columns for CEC. The intraparticle EOF velocities have been measured, relative to the interstitial fluid velocity, with particles of various pore size and solutions of various ionic strength. Based on the experimental findings, the optimal particle diameter and pore size have been predicted for CEC with respect to speed (EOF velocity) and separation efficiency.Suitable EOF may be created through columns packed with particles as small as 20 nm in diameter. However, to take advantage of the flat flow profile, particles of 80 nm in diameter or larger can be used. A high perfusive EOF may be generated with pore sizes as small as 5 nm, although a pore size of 30 nm may be optimal with respect to pore-to-interstitial flow ratio, required ionic strength, and separation efficiency. It is argued that this pore diameter may also be optimal for the flow channels in monolithic/continuous columns in CEC with respect to separati...

While developing a combination of capillary electrochromatography (CEC) with tandem mass spectrometry (MS) for the benefit of characterizing complex oligosaccharide mixtures, we needed highly efficient CEC columns operating in an "MS-friendly" mode. We demonstrate here novel types of polar, monolithic CEC columns that separate effectively complex mixtures of saccharides with the use of mobile phases containing acetonitrile/dilute ammonium formate buffers. Using the positive-ion mode of detection for neutral saccharides, the detection conditions were optimized down to the low-femtomole sensitivities with the use of an ion trap mass spectrometer. This column technology provides a nearly universal system that can separate a wide range of carbohydrates: mono- and oligosaccharides with the intact reducing end, as well as saccharide alditols. Even the anomers formed due to mutarotation could be resolved with a high content of organic phase.

A novel technique that uses polymer nanoparticles as pseudostationary phase in capillary electrochromatography with electrospray ionization mass spectrometry detection is described. A continuous full filling technique in which the nanoparticles were suspended in the entire electrolyte volume as well as a conventional partial filling technique is presented. No nanoparticles entered the mass spectrometer, which was fitted with an orthogonal electrospray interface, despite the continuous flow of nanoparticles into the interface. Nanoparticles (average diameter 160 nm) were prepared from methacrylic acid, methyl methacrylate, and trimethylolpropane trimethacrylate by utilizing a precipitation polymerization technique. Salbutamol, nortriptyline, and diphenhydramine were used as analytes. The interaction between analytes and nanoparticles was found to be predominantly ionic.

A new nuclear magnetic resonance (NMR) spectroscopy probe has been designed to measure the temperature of the water inside a capillary. The probe provides the ability to measure the temperature in a several hundred micrometer long capillary section, corresponding to liquid volumes in the picoliter to nanoliter range with a temperature monitoring accuracy of 0.2 degrees C. The NMR probe is based on a novel two-turn vertical solenoidal design, and its performance for capillary-scale temperature measurements is characterized. The temperature rise in a chromatographic frit of the type used in capillary electrochromatography is measured as a function of applied power, and temperature rises of more than 50 degrees C are observed. The temperature of the electrolyte cools rapidly after exiting the frit and can be followed as a function of distance from the frit. The ability to accurately monitor the temperature of water as it moves through porous materials such as packed chromatographic beds and frits is important to allow the effects of temperature on CEC separation performance to be determined.

We describe in this paper the use of ormosil (organically modified silica) sols as additives to the run buffer for selectivity manipulations between solutes in capillary electrophoresis. CE systems that contain sol additives in the run buffer can be thought of as pseudocapillary electrochromatography. Three sols based on different types of silanes were studied. Methyltrimethoxysilane (MTMOS)-based sol was found to improve selectivities between various aromatic acids. Aminopropyltrimethoxysilane (APS) sol interacts differently with structural isomers of aromatic acids than does MTMOS. At low pH with APS sol in the run buffer, neutral solutes can be separated, as well. The separation of the neutral solutes seems to be facilitated by the formation of hydrogen bonds between the solutes and the APS sol. APS and N-[3-(trimethoxysilyl)propyl]-ethylenediamine (EDAS) affect the separation of the same compounds differently, thus indicating that even small changes of the functional groups of the sol have pronounced effect on the interactions between the sols and the solutes.

A selective detection method for biogenic amines present in highly complex matrixes was devised by employing both electrokinetic injection and on-column-derivatization capillary electrochromatographic methods. The on-column derivatization capillary electrochromatography system was evaluated by use of a capillary column (total length of 45 cm, effective length of 25 cm) fabricated using a 100-mcirom (i.d.) fused-silica capillary tube packed with 5-microm (i.d.) ODS particles that were tolerant of an alkaline environment. The column was filled with a run buffer consisting of a derivatization reagent, o-phthalaldehyde/2-mercaptoethanol, in a mixture of borate buffer (pH 10). After electrokinetic injection of a mixture of five biogenic amines (histamine, serotonin, tyramine, putrescine, cadaverine) as a test sample, the free amines entered into the anodic site of the capillary column and started to travel along the column, during which time the analytes reacted with the derivatization reagent, separated out, and were detected with an absorbance at 340 nm when high voltage was applied to the column. When this system was applied to a mixture containing 5 biogenic amines and 17 amino acids, the 5 biogenic amines plus arginine selectively entered into the capillary with the electrokinetic injection and were observed on the electrochromatogram, but none of the amino acids lacking arginine were detected. The designated method was also tested for its ability to determine the presence of biogenic amines in the crude extracts obtained from two types of aged fish.

The molecular mass distributions (MMD) of celluloses from paper and other sources were determined by size exclusion electrochromatography (SEEC). Prior to the separation the celluloses were chemically modified with phenyl isocyanate into their tricarbanilate derivatives (CTC). Sensitive UV detection of the CTC could be performed at a wavelength of 210 nm. The solvent used for separation was acetone. With this solvent, a high electroosmotic flow could be generated in columns packed with bare silica particles. With a column packed with particles with a nominal pore size of 30 nm, use of a mobile phase with a salt concentration of 0.1 mM was found to be optimal with respect to mass selectivity and efficiency. The workable mass range under these conditions was from 2 kDa to at least 500 kDa for (native) celluloses. The SEEC method was compared to classical pressure-driven size exclusion chromatography (PD-SEC). It is shown that the two methods give comparable results for the MMD of celluloses, while SEEC has important advantages in terms of speed and sample consumption. With SEEC, the analysis time was less than 20 min. The method was applied for the study of cellulose degradation during (artificial) aging of paper samples. A clear reduction of the average molecular mass of cellulose during aging was observed. With SEEC, the required sample amount is strongly reduced compared to classical PD-SEC. With a single paper fiber (after derivatization), multiple analyses could be carried out. It is argued that this is not only important for the analysis of unique objects but that it also allows the detection of MMD heterogeneities on a microscale. The strong reduction in sample size may be relevant when local heterogeneities in other types of polymer samples are studied.

In situ time-resolved fluorescence spectroscopy for capillary electrochromatography (CEC) is described in the frequency domain. Fluorescence decay of the solute molecules is collected directly in the packed stationary phase of the CEC capillary. The fluorescence lifetime profile of the solute molecules reveals the microenvironments they experience in the C18 chromatographic interface. A quartz flow cell and experimental optimization of the signal-to-noise ratio are described that enable the collection of high-quality decay data and subsequent calculation of fluorescence lifetime profiles of the solute molecules. The distribution of pyrene (PY), 1-pyrenemethanol (PY-MeOH), and 1-pyrenebutanol (PY-BuOH) into the C18 stationary phase and the solute-C18 phase interactions are probed, under separation conditions for CEC. All three molecules display a Gaussian distribution of lifetimes, consistent with an ensemble of heterogeneous microenvironments in the C18 stationary phase. The least polar molecule PY diffuses deeply into and interacts extensively with the C18 phase, experiencing high hydrophobicity and significant heterogeneity of microenvironments. The retention order of PY-MeOH, PY-BuOH, and PY in CEC is determined by their interactions with the stationary phase, revealed by their fluorescence lifetime distributions.

A method for the direct observation of solute molecules interacting with a C18 stationary phase under real separation conditions in capillary electrochromatography (CEC) is investigated. The experiments were performed in a capillary electrochromatographic mode; however, the method and findings are useful both in CEC and revered-phase liquid chromatography. The distribution of solute molecules in the packed capillary is directly imaged with laser scanning confocal fluorescence microscopy. Conventional imaging techniques produce images where the C18 silica beads cannot be distinctively identified as a result of the deep depth of field. The optical sectioning capability of confocal imaging overcomes this problem to afford clearly defined images of the stationary-phase packing and the surrounding mobile phase. Fluorescein molecules are preferentially distributed in the mobile phase under reversed-phase chromatographic conditions. Nile Red and rhodamine 6G molecules prefer the environments of the porous C18 beads. Intensity distributions over time for areas within the stationary-phase beads differ from distributions of areas outside the beads in the mobile phase. Images taken at different depths into the capillary probe the internal structure of the C18 beads. While the internal structures of most beads are porous, confocal images show a small fraction (2%) of the silica beads have porous shells and nonporous cores. The capability of imaging the stationary phase distinctively from the mobile phase opens the possibilities of studying the quality of stationary phase, the structure of the column packing, and the mechanisms of separation.

A simple and reproducible technique for constructing perfectly aligned gaps in fused-silica capillaries has been developed for postcolumn reagent addition with capillary electrophoresis. This technique uses laser ablation with the second harmonic of a Nd:YAG laser (532 nm) at 13.5 mJ/pulse and a repetition rate of 15 Hz to create these gaps. A capillary is glued to a microscope slide and positioned at the focal point of a cylindrical lens using the focused beam from a laser pointer as a reference. Gaps of 14.0 +/- 2.2 microm (n = 33) at the bore of the capillary are produced with a success rate of 94% by ablation with 400 pulses. This simple method of gap construction requires no micromanipulation under a microscope, hydrofluoric acid etching, or use of column fittings. These structures have been used for reagent addition for postcolumn derivatization with laser-induced fluorescence detection and have been tested for the separation of proteins and amino acids. Detection limits of 6 x 10(-7) and 1 x 10(-8) M have been obtained for glycine and tranferrin, respectively. Separation efficiencies obtained using these gap reactors range from 38,000 to 213,000 theoretical plates.

Molecularly imprinted polymer coatings were synthesized in fused-silica capillary columns by the use of a surface-coupled radical initiator. The coatings were prepared using either toluene, dichloromethane, or acetonitrile in the prepolymerization mixtures and were 0.15-2 microm thick as determined by scanning electron microscopy. Solvent-dependent differences in appearance were observed. All the molecularly imprinted polymer-based open-tubular capillary columns were able to separate the enantiomers of propranolol by means of electrochromatography. Electrochromatographic performance was found to be dependent on the type of solvent used during the synthesis.

The mechanism of separating charged species by capillary electrochromatography (CEC) was modeled with the conditions of ideal/linear chromatography by using a simple random walk. The most novel aspect of the work rests with the assumption that in sufficiently high electric field ionized sample components can also migrate in the adsorbed state on the ionized surface of the stationary phase. This feature of CEC leads to the introduction of three dimensionless parameters: alpha, reduced mobility of a sample component with the electrosmotic mobility as the reference; beta, the CEC retention factor; and gamma, the ratio of the electrophoretic migration velocity and the velocity of surface electrodiffusion. Since the interplay of retentive and electrophoretic forces determines the overall migration velocity, the separation mechanism in CEC is governed by the relative importance of the above parameters. The model predicts conditions under which the features of the CEC system engender migration behavior that manifests itself in a relatively narrow elution window and in a gradient like elution pattern in the separation of peptides and proteins by using pro forma isocratic CEC. It is believed that such elution patterns, which resemble those obtained by the use of external gradient of the eluent, are brought about by the formation of an internal gradient in the CEC system that gave rise to concomitant peak compression. The peculiarities of CEC are discussed in the three operational modalities of the technique: co-current, countercurrent, and co-counter CEC. The results suggest that CEC, which is often called "liquid chromatography on electrophoretic platform" is an analytical tool with great potential in the separation of peptides and proteins.

Electrospun polymer nanofiber stationary phases were examined for their application to planar electrochromatography (PEC). Separations were performed on polyacrylonitrile nanofiber ultra-thin-layer chromatography (UTLC) plates in 1-2 min using a ternary mobile phase. The influences of buffer concentration and pH, ratio of organic modifier, and development time on analyte migration distances were studied. Band broadening in this system was studied as a function of distance. The plate height initially decreased and then plateaued with a minimum plate height value as low as 11 μm. Nanofiber alignment considerably increased analyte migration rate, but larger spot sizes were noted when nearly complete fiber alignment was used. The easily tunable stationary phase thickness can be tailored to a given separation, where thinner layers promote faster separations and thicker layers are ideal for more complex mixtures. Compared to UTLC, PEC offers unique selectivity and decreased analysis time (4 times faster over 15 mm). Results for a two-dimensional separation using UTLC and PEC are also reported. These rapid separations required 11 min using a 40 × 40 mm plate and exhibited a significant increase in separation number (70-77).

In chromatographic separations, the heights of peaks are proportional to the concentrations of sample components present in an injected mixture. In general, an increase in the peak height cannot be achieved by simply increasing the injection time or the sample plug length. An exception occurs if some form of on-line preconcentration is possible. We present a new strategy for achieving on-line preconcentration by the use of a porous chromatographic material that acts as a solid-phase extractor as well as a stationary-phase separator. We are able to realize significant on-line preconcentration using capillary columns filled with a photopolymerized sol-gel (PSG). More than 2-cm plugs of sample solution can be loaded into the capillary and concentrated using a running buffer that is the same as the injection buffer (to avoid solvent gradient effects). As a demonstration, mixtures of three different polycyclic aromatic hydrocarbons, eight different alkyl phenyl ketones, and five different peptides in solutions of aqueous acetonitrile have been injected onto the PSG column and separated by capillary electrochromatography. The preconcentration is marked in terms of peak heights, with up to 100-fold increase for the PAH mixture, 30-fold for the alkyl phenyl ketone mixture, and 20-fold for the peptide mixture. Preconcentration takes place because of the high mass-transfer rates possible in the highly porous structure, and the extent of preconcentration follows the retention factor k for a given analyte.

Preconcentration effects of solvent gradient and sample stacking are investigated on a photopolymerized sol-gel (PSG) in capillary electrochromatography. The porous PSG monolith has a high mass-transfer rate. This characteristic promotes preconcentration of dilute samples. Plugs of samples more than 2 cm in length prepared in the separation solution (nongradient condition) are injected onto the PSG column. The extent of preconcentration is quite significant, showing up to a 100-fold increase in peak heights of the separated analytes. Even larger preconcentrations are achieved under gradient conditions by dissolving the sample in a matrix with a higher concentration of noneluting solvent (water). For eight alkyl phenyl ketones and four polycyclic aromatic hydrocarbons that serve as neutral test analytes, improvements in peak heights obtained under gradient conditions can be more than a 1000-fold. Indeed, injection of a 91.2-cm plug, which is more than 3 times the total length of the capillary, was possible with only a minor loss in resolution. Five peptides serve as charged test analytes. Nongradient conditions in which the sample is hydrodynamically injected onto the PSG column show sizable preconcentration because of sample stacking. The use of a solvent gradient with the same ionic strength, however, does not appear to have practical value because of destacking caused by the changing organic composition that affects the conductivity. As an alternative preconcentration method, we demonstrate that electric field-enhanced sample injection on the PSG yielded up to a 1000-fold improvement in detection sensitivity for the test peptides.

A mode of capillary electrochromatography for separation of ionic compounds driven by electrophoretic mobility on a neutrally hydrophobic monolithic column was developed. The monolithic column was prepared from the in situ copolymerization of lauryl methacrylate and ethylene dimethacrylate to form a C12 hydrophobic stationary phase. It was found that EOF in this hydrophobic monolithic column was very poor, even the pH value of mobile phase at 8.0. The peptides at acidic buffer were separated on the basis of their differences in electrophoretic mobility and hydrophobic interaction with the stationary phase; therefore, different separation selectivity can be obtained in CEC from that in capillary zone electrophoresis (CZE). Separation of peptides has been realized with high column efficiency (up to 150,000 plates/meter) and good reproducibility (migration time with RSD

The effect of pore flow on the separation efficiency of capillary electrochromatography (CEC) has been studied using columns packed with particles with different pore sizes. A previously developed model was used to predict the (relative) pore flow velocity in these columns under various experimental conditions. Equations are derived describing the effect of pore flow on peak broadening in CEC. The theory has been compared with practice in the reversed-phase CEC separation of various polyaromatic hydrocarbons. It is shown, by theory and experimentally, that the mass-transfer resistance contribution to peak dispersion can be effectively eliminated when using porous particles with a high (> or =50 nm) average pore diameter. Moreover, at high pore-to-interstitial flow ratios the flow inhomogeneity contribution (the A term in the plate height equation) is also shown to decrease. Under optimal conditions, a reduced plate height of 0.3 for the nonretained compound could be obtained. It is argued that fully perfusive porous particles can be a more efficient separation medium in CEC than nonporous particles.

An on-column trace enrichment method for CEC of dilute samples is presented. The method involves on-line preconcentration by frontal electrochromatography under conditions of strong solute binding to the stationary phase followed by a step-gradient elution electrochromatography with a mobile phase of high eluting strength. This method is tested with dilute samples of carbamate insecticides using capillary columns of 100-microm i.d. packed with a 5-microm octadecyl silica (ODS) stationary phase. The effectiveness of on-line preconcentration (i.e., zone narrowing) depends on the retention factor, k', of the analyte in the injection solvent as well as in the eluting mobile phase (i.e., the organic solvent content), the applied voltage during sample introduction, and elution and length of the introduced sample plug. Under optimal frontal and elution electrochromatography conditions, a 500-fold sensitivity increase is achieved for carbofuran (a carbamate insecticide) with a UV detector. The method is demonstrated with deionized and tap water samples spiked with carbamate insecticides.

A two-dimensional separation system on a microfabricated device was demonstrated using open-channel electrochromatography as the first dimension and capillary electrophoresis as the second dimension. The first dimension was operated under isocratic conditions, and the effluent from the first dimension was repetitively injected into the second dimension every few seconds. A 25-cm separation channel with spiral geometry for open-channel electrochromatography was chemically modified with octadecylsilane and coupled to a 1.2-cm straight separation channel for capillary electrophoresis. Fluorescently labeled products from tryptic digests of beta-casein were analyzed in 13 min with this system.