Search

We present a new microfluidic platform for the study of enzymtatic reactions using static droplets on demand. This allows us to monitor both fast and slow reactions with the same device and minute amounts of reagents. The droplets are produced and displaced using confinement gradients, which allows the experiments to be performed without having any mean flow of the external phase. Our device is used to produce six different pairs of drops, which are placed side by side in the same microfluidic chamber. A laser pulse is then used to trigger the fusion of each pair, thus initiating a chemcial reaction. Imaging is used to monitor the time evolution of enzymatic reactions. In the case of slow reactions, the reagents are completely mixed before any reaction is detected. This allows us to use standard Michaelis-Menten theory to analyze the time evolution. In the case of fast reactions, the time evolution takes place through a reaction-diffusion process, for which we develop a model that incorporates enzymatic reactions in the reaction terms. The theoretical predictions from this model are then compared to experiments in order to provide measurements of the chemical kinetics. The approach of producing droplets through confinement gradients and analyzing reactions within stationary drops provides an ultralow consumption platform. The physical principles are simple and robust, which suggests that the platform can be automated to reach large throughput analyses of enzymes.

The ability to miniaturize biochemical assays in water-in-oil emulsion droplets allows a massive scale-down of reaction volumes, so that high-throughput experimentation can be performed more economically and more efficiently. Generating such droplets in compartment-on-demand (COD) platforms is the basis for rapid, automated screening of chemical and biological libraries with minimal volume consumption. Herein, we describe the implementation of such a COD platform to perform high precision nanoliter assays. The coupling of a COD platform to a droplet absorbance detection set-up results in a fully automated analytical system. Michaelis–Menten parameters of 4-nitrophenyl glucopyranoside hydrolysis by sweet almond β-glucosidase can be generated based on 24 time-courses taken at different substrate concentrations with a total volume consumption of only 1.4 μL. Importantly, kinetic parameters can be derived in a fully unsupervised manner within 20 min: droplet production (5 min), initial reading of the droplet sequence (5 min), and droplet fusion to initiate the reaction and read-out over time (10 min). Similarly, the inhibition of the enzymatic reaction by conduritol B epoxide and 1-deoxynojirimycin was measured, and Ki values were determined. In both cases, the kinetic parameters obtained in droplets were identical within error to values obtained in titer plates, despite a >104-fold volume reduction, from micro- to nanoliters., Analytical Chemistry, 85 (9), ISSN:1520-6882, ISSN:0003-2700

Water-in-oil microdroplets in microfluidics are well-defined individual picoliter reaction compartments and, as such, have great potential for quantitative high-throughput biological screening. This, however, depends upon contents of the droplets not leaking out into the oil phase. To assess the mechanism of possible leaking, the retention of various fluorescein derivatives from droplets formed in mineral oil and stored for hours in a reservoir on chip was studied. Leaking into the oil phase was observed and was shown to be dependent on the nature of the compounds and on the concentration of the silicone-based polymeric surfactant Abil EM 90 used. In experiments in which droplets filled with fluorescein were mixed with droplets filled with only buffer, the rate of efflux from filled droplets to empty droplets was dependent on the number of neighboring droplets of different composition. Buffer droplets with five fluorescein-containing neighbors took up the fluorophore 4.5 times faster than buffer droplets without fluorescein neighbors. The addition of bovine serum albumin (BSA) substantially reduced leaking. A formulation with 5% BSA reduces leaking of the fluorophore from 45% to 3%. Inclusion of BSA enabled experiments to be carried out over periods up to 18 h, without substantial leaking (

We present a high throughput microfluidic device for continuous-flow polymerase chain reaction (PCR) in water-in-oil droplets of nanoliter volumes. The circular design of this device allows droplets to pass through alternating temperature zones and complete 34 cycles of PCR in only 17 min, avoiding temperature cycling of the entire device. The temperatures for the applied two-temperature PCR protocol can be adjusted according to requirements of template and primers. These temperatures were determined with fluorescence lifetime imaging (FLIM) inside the droplets, exploiting the temperature-dependent fluorescence lifetime of rhodamine B. The successful amplification of an 85 base-pair long template from four different start concentrations was demonstrated. Analysis of the product by gel-electrophoresis, sequencing, and real-time PCR showed that the amplification is specific and the amplification factors of up to 5 x 10(6)-fold are comparable to amplification factors obtained in a benchtop PCR machine. The high efficiency allows amplification from a single molecule of DNA per droplet. This device holds promise for convenient integration with other microfluidic devices and adds a critical missing component to the laboratory-on-a-chip toolkit.

Analysis of concentration dependencies is key to the quantitative understanding of biological and chemical systems. In experimental tests involving concentration gradients such as inhibitor library screening, the number of data points and the ratio between the stock volume and the volume required in each test determine the quality and efficiency of the information gained. Titerplate assays are currently the most widely used format, even though they require microlitre volumes. Compartmentalization of reactions in pico- to nanoliter water-in-oil droplets in microfluidic devices provides a solution for massive volume reduction. This work addresses the challenge of producing microfluidic-based concentration gradients in a way that every droplet represents one unique reagent combination. We present a simple microcapillary technique able to generate such series of monodisperse water-in-oil droplets (with a frequency of up to 10 Hz) from a sample presented in an open well (e.g., a titerplate). Time-dependent variation of the well content results in microdroplets that represent time capsules of the composition of the source well. By preserving the spatial encoding of the droplets in tubing, each reactor is assigned an accurate concentration value. We used this approach to record kinetic time courses of the haloalkane dehalogenase DbjA and analyzed 150 combinations of enzyme/substrate/inhibitor in less than 5 min, resulting in conclusive Michaelis-Menten and inhibition curves. Avoiding chips and merely requiring two pumps, a magnetic plate with a stirrer, tubing, and a pipet tip, this easy-to-use device rivals the output of much more expensive liquid handling systems using a fraction (∼100-fold less) of the reagents consumed in microwell format.

We describe the development of an enzyme assay inside picoliter microdroplets. The enzyme alkaline phosphatase is expressed in Escherichia coli cells and presented in the periplasm. Droplets act as discrete reactors which retain and localize any reaction product. The catalytic turnover of the substrate is measured in individual droplets by monitoring the fluorescence at several time points within the device and exhibits kinetic behavior similar to that observed in bulk solution. Studies on wild type and a mutant enzyme successfully demonstrated the feasibility of using microfluidic droplets to provide time-resolved kinetic measurements.