Search

Chlorinated paraffins (CPs) are complex mixtures consisting of various C homologues ( n C ≈ 10-30) and Cl homologues ( n Cl ≈ 2-20). Technical CP mixtures are produced on a large scale (>10 6 t/y) and are widely used such as plasticizers in plastic and coolants in metalwork. Since 2017, short-chain CPs (C 10 -C 13 ) are classified as persistent organic pollutants (POPs) by the Stockholm Convention but longer-chain CPs are not regulated. Analysis of technical CP mixtures is challenging because they consist of hundreds of homologues and millions of constitutional isomers and stereoisomers. Furthermore, such mixtures can also contain byproducts and transformation products such as chlorinated olefins (COs). We applied a liquid-chromatography method coupled to an atmospheric pressure chemical ionization technique with a high-resolution mass detector (LC-APCI-Orbitrap-MS) to study CP and CO homologues in two plastic materials. Respective mass spectra can contain up to 23,000 signals from 1320 different C-Cl homologue classes. The R-based automated spectra evaluation routine (RASER) was developed to efficiently search for characteristic ions in these complex mass spectra. With it, the time needed to evaluate such spectra was reduced from weeks to hours, compared to manual data evaluation. Unique sets of homologue distributions could be obtained from the two plastic materials. CPs were found together with their transformation products, the chlorinated mono-olefins (COs), di-olefins (CdiOs), and tri-olefins (CtriOs) in both plastic materials. Based on these examples, it can be shown that RASER is an efficient and selective tool for evaluating high-resolution mass spectra of CP mixtures containing hundreds of homologues.

Chlorinated paraffins (CPs) are high production volume chemicals and ubiquitous environmental contaminants. CPs are produced and used as complex mixtures of polychlorinated n-alkanes containing thousands of isomers, leading to demanding analytical challenges. Due to their high degree of chlorination, CPs have highly complex isotopic mass patterns that often overlap, even when applying high resolution mass spectrometry. This is further complicated in the presence of degradation products such as chlorinated alkenes (CP-enes). CP-enes are formed by dehydrochlorination of CPs and are expected thermal degradation products in some applications of CPs, for example, as metal working fluids. A mathematical method is presented that allows deconvolution of the strongly interfered measured isotope clusters into linear combinations of isotope clusters of CPs and CP-enes. The analytical method applied was direct liquid injection into an atmospheric pressure chemical ionization source, followed by quadrupole time-of-flight mass spectrometry (APCI-qTOF-MS), operated in full scan negative ion mode. The mathematical deconvolution method was successfully applied to a thermally aged polychlorinated tridecane formulation (Cl 5 -Cl 9 ). Deconvolution of mass patterns allowed quantifying fractions of interfering CPs and CP-enes. After exposure to 220 °C for 2, 4, 8, and 24 h, fractions of CP-enes within the respective interfering clusters increased from 0-3% at 0 h up to 37-44% after 24 h. It was shown that thermolysis of CPs follows first-order kinetics. The presented deconvolution method allows CP degradation studies with mass resolution lower than 20000 and is therefore a good alternative when higher resolution is not available.

A sensitive, specific, and rapid analytical method based on liquid-liquid extraction and liquid chromatography/atmospheric pressure chemical ionization mass spectrometry has been developed for trace analysis of nitrated phenolic compounds in rain samples. Selective detection in the low nanogram-per-milliliter range was achieved on the basis of selected ion monitoring of the respective phenolate anions [M - H]-. The presence of alkylated (C1-C3) and nonalkylated nitrophenols (C0) was confirmed by their characteristic neutral loss of nitrogen dioxide upon collision-induced dissociation in tandem mass spectrometry mode. In individual rain samples, 27 C0-C3-nitrophenol isomers as well as 16 C0-C3-dinitrophenol isomers were detected. Total levels of nitro- and dinitrophenol isomers were estimated on the basis of 2-nitrophenol and 2,6-dinitrophenol. Concentrations between 0.66 and 2.0, 12-29, 12-36, and 5.5-12 microg/L were obtained for the C0-, C1-, C2-, and C3-nitrophenols, respectively. Lower levels of 0.19-1.4, 0.39-2.1, 0.053-0.55, and 0.081-0.10 microg/L were estimated for the corresponding C0-, C1-, C2-, and C3-dinitrophenols. The highest number of individual isomers was found in winter rain samples, and distinctive isomeric patterns were observed for individual samples. Mono- and dialkylated nitrophenols and non- and monoalkylated dinitrophenols represent the major part of nitro- and dinitrophenol species. Comparing the pattern of Co-, C1-, and C2-nitrophenols in rain with the corresponding Co-, C1-, and C2-benzene pattern in ambient air suggests that atmospheric oxidation and nitration processes of alkylbenzenes are favored, as compared to those of benzene.