Search

Spherical biosamples such as immunobeads, cells, and cell aggregates have been widely used in bioapplications. The bioactivity of individual spherical biosamples in highly sensitive assays and individual analyses must be evaluated in a high-throughput manner. Electrochemiluminescence (ECL) imaging was recently proposed for the high-throughput analysis of diffusive molecules from spherical biosamples. ECL imaging involves the placing of spherical biosamples on a flat electrode filled with a solution. The biosamples produce (or consume) biological/chemical molecules such as H 2 O 2 and O 2 , which diffuse to form a concentration gradient at the electrode. The ECL signals from the molecules are then measured to obtain the concentration profile, which allows the flux to be estimated, from which their bioactivities can be successfully calculated. However, no studies on theoretical approaches for spherical biosamples on flat surfaces have been conducted using ECL imaging. Therefore, this paper presents a novel spherical diffusion theory for spherical biosamples on a flat surface, which is based on the common spherical diffusion theory and was designated as the extended spherical diffusion theory. First, the concepts behind this theory are discussed. The theory is then validated by comparison with a simulated analysis. The resulting equation successfully expresses the concentration profile for the entire area. The glucose oxidase activity in the hydrogel beads is subsequently visualized using ECL imaging, and the enzymatic product flux is calculated using the proof-of-concept theory. Finally, a time-dependent simulation is conducted to fill the gap between the theoretical and experimental data. This paper presents novel guidelines for this analysis.

Vasculature-on-a-chip is a microfluidic cell culture device used for modeling vascular functions by culturing endothelial cells. Porous membranes are widely used to create cell culture environments. However, in situ real-time measurements of cellular metabolites in microchannels are challenging. In this study, a novel microfluidic device with a porous membrane electrode was developed for the in situ monitoring of nitric oxide (NO) released by endothelial cells in real time. In this system, a porous Au membrane electrode was placed directly beneath the cells for in situ and real-time measurements of NO, a biomarker of endothelial cells. First, the device was electrochemically characterized to construct a calibration plot for NO. Next, NO released by human umbilical vein endothelial cells under l-arginine stimulation was successfully quantified. Furthermore, the changes in NO release with culture time (in days) using the same sample were successfully recorded by exploiting minimally invasive measurements. This is the first report on the combination of a microfluidic device and porous membrane electrode for the electrochemical analysis of endothelial cells. This device will contribute to the development of organ-on-a-chip technology for real-time in situ cell analyses.

Here, we report a high-sensitivity dual immunoassay using Lumulus amebocyte lysate (LAL) and blood coagulation cascade reactions with redox cycling in a nanoscale-gap electrode. Endotoxin and factor XIa were used as the label molecules for the immunoassay of two types of analytes to induce the LAL and coagulation cascade reactions, respectively, when each corresponding analyte existed in the sample solution. In addition to the signal amplification by the cascade reactions, we employed redox cycling in a nanoscale gap to achieve a highly sensitive assay. The nanoscale-gap electrode amplifies the amperometric signals from p -aminophenol liberated from artificial substrates in the final steps of the cascade reactions. First, the cross reaction between the LAL and coagulation cascade reactions was investigated. The results indicated that these cascade reactions did not efficiently proceed in a single solution owing to the cross reaction. Therefore, we selected to induce two cascade reactions in different solutions by bisecting the beads after the immunocomplex formation on the beads. The cross reactions of factor XIa with the LAL cascade reaction and of endotoxin with the coagulation cascade reaction were investigated. The effects of these cross reactions were revealed to be negligible by bisecting the beads before inducing the cascade reactions. Finally, a dual immunoassay for goat and human immunoglobulin G was performed, for which the limits of detection were 70 pg/mL (470 fmol/L) and 1.0 ng/mL (6.6 pmol/L), respectively. Thus, our dual immunoassay provides a sensitive platform for clinical diagnosis requiring detection of multiple analytes.

Here, we report a highly sensitive immunoassay for human immunoglobulin G (IgG) that uses signal amplification of the coagulation cascade. Z-Phe-Pro-Lys- p -nitroaniline (FPK- p NA) was used as a substrate for thrombin activation in the last step of the coagulation cascade. During the coagulation cascade, p NA is liberated from FPK- p NA and can be detected electrochemically. Using square wave voltammetry with a glassy carbon electrode, we demonstrated that p NA can be quantified in a solution modeling the coagulation cascade prepared by mixing FPK- p NA and p NA. Characterization of the reactivity of thrombin toward FPK- p NA revealed that thrombin efficiently reacted with FPK- p NA. Subsequent characterization of factor XIa activity of factor XIa-labeled antibody revealed that factor XIa was not inactivated during labeling. Finally, a coagulation cascade-based immunoassay for human IgG was performed using a factor XIa-labeled antibody on magnetic beads. The limit of detection for human IgG was 5.0 pg/mL (33 fM) indicating that the coagulation cascade can amplify the immunoassay sensitivity compared to immunoassay using a thrombin-labeled antibody as a condition without a coagulation cascade. Coagulation cascade-based immunoassay was also highly selective. In the near future, we will report a highly sensitive immunoassay for the simultaneous detection of multiple analytes using a coagulation cascade-based immunoassay and Limulus amebocyte lysate reaction-based immunoassay we previously reported.

Scanning ion conductance microscopy (SICM) has enabled cell surface topography at a high resolution with low invasiveness. However, SICM has not been applied to the observation of cell surfaces in hydrogels, which can serve as scaffolds for three-dimensional cell culture. In this study, we applied SICM for imaging a cell surface in a microvascular lumen reconstructed in a hydrogel. To achieve this goal, we developed a micropipet navigation technique using ionic current to detect the position of a microvascular lumen. Combining this navigation technique with SICM, endothelial cells in a microvascular model and blebs were visualized successfully at the single-cell level. To the best of our knowledge, this is the first report on visualizing cell surfaces in hydrogels using a SICM. This technique will be useful for furthering our understanding of the mechanism of intravascular diseases.

A multicellular tumor aggregate, known as a spheroid, is an indispensable tool to study cancer biology. Owing to its three-dimensional organization, a spheroid exhibits an inherent gradient of nutrients, oxygen, and metabolites within itself. The spheroid provides culture conditions that resemble the microenvironment of certain cancer cells and causes these cells to acquire characteristics relevant to tumors in our body. However, site-specific gene expression analysis in an intact spheroid with single-cell resolution has not been explored. Recently, some types of electrochemical syringes were developed to extract cellular materials from living single cells for transcriptomic analysis. Here, we investigated whether an electrochemical syringe could be used to evaluate site-specific gene expression in a spheroid. A small amount of cytosol (roughly 540-1480 fL, less than the volume of a single cell) was successfully collected from the first, second, and third layers of the spheroid using an electrochemical syringe without causing damage to the spheroid architecture. We found that the CCNB1 and CCNA2 expression levels were different between the surface and the average of the entire spheroid, indicating that there are heterogeneous cellular functions across different regions of the spheroid. This method provides opportunities to improve our understanding of spatial gene expression of single cells in a three-dimensional environment.

Multiplexed bioimaging systems have triggered the development of effective assays, contributing new biological information. Although electrochemical imaging is beneficial for quantitative analysis in real time, monitoring multiple cell functions is difficult. We have developed a novel electrochemical imaging system, herein, using a large-scale integration (LSI)-based amperometric device for detecting multiple biomolecules simultaneously. This system is designated as an electrochemicolor imaging system in which the current signals from two different types of biomolecules are depicted as a multicolor electrochemical image. The mode-selectable function of the 400-electrode device enables the imaging system and two different potentials can be independently applied to the selected electrodes. The imaging system is successfully applied for detecting multiple cell functions of the embryonic stem (ES) cell and the rat pheochromocytoma (PC12) cell aggregates. To the best of our knowledge, this is the first time that a real-time electrochemical mapping technique for multiple electroactive species, simultaneously, has been reported. The imaging system is a promising bioanalytical method for exploring complex biological phenomena.

The O 2 consumption rate of embryos has been attracting much attention as a key indicator of cell metabolisms and development. In this study, we propose an on-chip device that enables the accurate, easy, and noninvasive measurement of O 2 consumption rates of single embryos. Pt electrodes and micropits for embryo settlement were fabricated on Si chips via microfabrication techniques. The configuration of the device enables the detection of O 2 concentration profiles surrounding the embryos by settling embryos into the pits with a mouth pipet. Moreover, as the detection is based on an electrochemical method, the influence of O 2 consumption on the electrodes was also considered. By using a simulator (COMSOL Multiphysics), we estimated the O 2 concentration profiles in the device with and without the effects of the electrodes. Based on the simulation results, we developed a normalization process to calculate the precise O 2 consumption rate of the sample. Finally, using both the measurement system and the algorithm for the analysis, the respiratory activities of mouse embryos were successfully measured.

The mouse embryonic stem (ES) cell-derived angiogenesis model is widely used as a 3D model, reproducing cell-cell interactions in the living body. Previously, many methods to analyze localized cellular function, including in situ hybridization and laser capture microdissection, have been reported. In this study, we achieved a collection of localized cells from the angiogenesis model in hydrogel. The gene expression profiles of the endothelial cells derived from mouse ES cells were evaluated. First, we collected localized cells from the live tissue model embedded in hydrogel using the double barrel carbon probe (DBCP) and quantified mRNA expression. Second, we found that vascular marker genes were expressed at a much higher level in sprouting vessels than in the central core of the embryoid body because the cells in sprouting vessels might significantly differentiate into endothelial linages, including tip/stalk cells. Third, the gene expression levels tended to be different between the top and middle regions in the sprouting vessel due to the difference in the degree of differentiation in these regions. At the top region of the vessel, both the tip and stalk cells were present. The cells in the middle region became more mature. Collectively, these results show that DBCP is very useful for analyzing localized gene expression in cells collected from 3D live tissues embedded in hydrogel. This technique can be applied to comprehensive gene expression analyses in the medical field.

In the present study, we used a large-scale integration (LSI)-based amperometric sensor array system, designated Bio-LSI, to image dopamine release from three-dimensional (3D)-cultured PC12 cells (PC12 spheroids). The Bio-LSI device consists of 400 sensor electrodes with a pitch of 250 μm for rapid electrochemical imaging of large areas. PC12 spheroids were stimulated with K(+) to release dopamine. Poststimulation dopamine release from the PC12 spheroids was electrochemically imaged using the Bio-LSI device. Bio-LSI clearly showed the effects of the dopaminergic drugs l-3,4-dihydroxyphenylalanine (L-DOPA) and reserpine on K(+)-stimulated dopamine release from PC12 spheroids. Our results demonstrate that dopamine release from PC12 spheroids can be monitored using the device, suggesting that the Bio-LSI is a promising tool for use in evaluating 3D-cultured dopaminergic cells and the effects of dopaminergic drugs. To the best of our knowledge, this report is the first to describe electrochemical imaging of dopamine release by PC12 spheroids using LSI-based amperometric sensors.

We fabricated a platinum-based double barrel probe for scanning electrochemical microscopy-scanning ion conductance microscopy (SECM-SICM) by electrodepositing platinum onto the carbon nanoelectrode of the double barrel probe. The deposition conditions were optimized to attain highly sensitive electrochemical measurements and imaging. Simultaneous SECM-SICM imaging of electrochemical features and noncontact topography by using the optimized probe afforded high-resolution images of epidermal growth factor receptors (EGFR) on the membrane surface of the A431 cells.

Scanning ion conductance microscopy (SICM) was applied to evaluate an unlabeled secretory protein in living cells. The target protein, von Willebrand factor (vWF), was released from human endothelial cells by adding phorbol-12-myristate-13-acetate (PMA). We confirmed that SICM could be used to clearly visualize the complex network of vWF and to detect strings with widths as low as 60 nm without any artifact. By acquiring the sequential SICM images of living cells, the protrusion and strings formation were observed. We also detected the opening and closing motions of a small pore (∼500 nm), which is difficult to visualize with fluorescence methods. The results clearly demonstrate that SICM is a powerful tool to examine the changes in living cells during exocytosis.

This paper reports a novel approach for the simple detection of cell apoptosis using an electrochemical technique. This method uses caspase-3 activity as an indicator of apoptosis. Caspase-3 activity was detected with differential plus voltammetry (DPV) as an alternative to conventional spectrometry. In this method, p-nitroaniline (pNA) released from Asp-Glu-Val-Asp-pNA by caspase-3 enzyme reaction was measured with DPV by using a glassy carbon electrode. Using this method, we successfully detected cell apoptosis occurring inside living HepG2 cells without the need for a cell lysis step. This method provides an easy assay procedure and, more importantly, allows a live cell apoptosis detection format. This novel electrochemical apoptosis assay using living cells instead of typically used cell lysates will expand the applicable range of the apoptosis assay to include cell activity assays for drug discovery and cell transplantation medicine.

A new local redox cycling-based electrochemical (LRC-EC) device integrated with many electrochemical sensors has been developed into a small chip device. The LRC-EC chip device was successfully applied for detection of alkaline phosphatase and horseradish peroxidase activity in substrate generation/chip collection (SG/CC) and extended feedback modes, respectively. The new imaging approach with extended feedback mode was particularly effective for sharpening of the image, because this mode uses feedback signals and minimizes the undesired influence of diffusion. The LRC-EC chip device is considered to be a useful tool for bioanalysis.

Alkaline phosphatase (ALP) is an enzyme commonly used as an undifferentiated marker of embryonic stem cells (ESCs). Although noninvasive ALP detection has long been desired for stem cell research and in cell transplantation therapy, little progress has been made in developing such techniques. In this study, we propose a noninvasive evaluation method for detecting ALP activity in mouse embryoid bodies (mEBs) using scanning electrochemical microscopy (SECM). SECM has several advantages, including being noninvasive, nonlabeled, quantitative, and highly sensitive. First, we found that SECM-based ALP evaluation permits the comparison of ALP activity among mEBs of different sizes by monitoring the p-aminophenol (PAP) production rate in aqueous solution containing p-aminophenylphosphate (PAPP) normal to the surface area of each sample. Second, coculture spheroids, consisting of mEB and MCF-7 cells for the core and the concentric outer layer, respectively, were prepared as model samples showing heterogeneous ALP activities. The overall PAP production rate dramatically declined in the presence of the MCF-7 cell outer layer, which blocked the mass transfer of PAPP to inner mEB. This result indicated that the SECM response mainly originated from ALP located at the surface of the cellular aggregate, including mEBs and coculture spheroids. Third, taking advantage of the noninvasive nature of SECM, we examined the relevance of ALP activity and cardiomyocyte differentiation. Collectively, these results suggested that noninvasive SECM-based ALP activity normalized by the sample surface enables the selection of EBs with a higher potential to differentiate into cardiomyocytes, which can contribute toward various types of stem cell research.

In this study, we fabricated a probe consisting of a carbon nanoelectrode and an Ag/AgCl reference electrode for detecting the activity of cells in single droplets. HeLa cells were confined into a single droplet, and the alkaline phosphatase (ALP) activity of the cells was electrochemically measured using the probe inserted into the droplet. The ALP of the confined cells catalyzed the hydrolysis of p-aminophenyl phosphate (PAPP) to yield p-aminophenol (PAP) that gave electrochemical responses. Since the tip of the carbon-Ag/AgCl probe is very small, it is useful for electrochemical analysis of cells using droplets.

We propose a novel electrochemical detection system for alkaline phosphatase (ALP) activity using the difference in water and oil solubilities between the substrate, ferrocene ethyl phosphate ester (FcEtOPO(3)(2-)), and the enzymatic product, ferroceneethanol (FcEtOH). In this system, water droplets containing ALP and FcEtOPO(3)(2-) were placed on a Pt disk microelectrode and surrounded by a mineral oil. By the ALP-catalyzed reaction, FcEtOPO(3)(2-) was converted to FcEtOH, which was then transferred to the mineral oil from the water droplets with FcEtOPO(3)(2-) remaining in the water droplets. After partitioning FcEtOH from the water droplets, FcEtOPO(3)(2-) was detected at the Pt disk microelectrode to estimate the ALP activity. Using this novel system, the ALP activity of embryoid bodies was successfully detected. We believe that the present system will be widely applicable to ALP-based bioassays.