Search

Detailed characterization of petroleum derived sulfur compounds has been challenging, due to the complex composition of the hydrocarbon matrix. A novel method was developed for selective separation of thiophenic and sulfidic compounds from petroleum. Sulfur compounds were methylated to sulfonium salts by AgBF4 and CH3I, then the polar salts were separated by precipitation from petroleum matrix. The thiophenic and sulfidic sulfonium salts were sequentially demethylated with 7-azaindole and 4-dimethylaminopyridine, obtaining original thiophenic and sulfidic compounds, respectively. The method was validated by model compounds, and applied to a diesel and a vacuum distillation petroleum fraction. Sulfur fractions were characterized by gas chromatography (GC) coupled with a sulfur chemiluminescence detector (SCD) and quadrupole mass spectrometry (MS), and high resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The technique was effective to selectively obtain high-purity thiophenic and sulfidic compounds and showed rare discrimination among sulfur compounds with ranging molecular weights and degrees of unsaturation. The method would facilitate multifaceted detailed characterization of sulfur compounds in an organic complex matrix.

A novel technique was developed for characterization of saturated hydrocarbons. Linear alkanes were selectively oxidized to ketones by ruthenium ion catalyzed oxidation (RICO). Branched and cyclic alkanes were oxidized to alcohols and ketones. The ketones were then reduced to alcohols by lithium aluminum hydride (LiAlH(4)). The monohydric alcohols (O(1)) in the products obtained from the RICO and RICO-LiAlH(4) reduction reactions were characterized using negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) for identification of iso-paraffins, acyclic paraffins and cyclic paraffins. Various model saturated compounds were used to determine the RICO reaction and ionization selectivity. The results from the FTICR MS analysis on the petroleum distillates derived saturated fraction were in agreement with those from field ionization gas chromatography time-of-flight mass spectrometry (FI GC-TOF MS) analysis. The technique was also used to characterize a petroleum vacuum residue (VR) derived saturates. The results showed that the saturated molecules in the VR contained up to 11 cyclic rings, and the maximum carbon number was up to 92.

A novel analytical method for identifying sulfides in petroleum and its fractions was developed. Sulfides in petroleum were selectively oxidized into sulfoxides using tetrabutylammonium periodate (TBAPI) and identified by positive-ion electrospray ionization (ESI) Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). A variety of model sulfur compounds were examined to evaluate the selective oxidization and ionization efficiencies for sulfur compounds in petroleum. Two fractions, straight-run diesel and saturates of Athabasca oilsands bitumen were investigated using this approach. The oxidization process was highly selective for sulfides from thiophenes and aromatic hydrocarbons. Oxidation generated sulfoxides were ionized by positive-ion ESI and analyzed by FT-ICR MS. Mass spectra revealed the composition characteristics of sulfides in the diesel by contrasting the double bond equivalence (DBE) and carbon number distribution of sulfur compounds before and after oxidation. The abundant sulfides in the straight run diesel and saturates fraction of oilsands bitumen had DBE values of 1-3 and 1-4, respectively.