Search

Hydrogen peroxide (H2O2) levels play a vital role in redox regulation and maintaining the physiological balance of living cells, especially in cell mechanotransduction. Despite the achievements on strain-induced cellular H2O2monitoring, the applied voltage for H2O2electrooxidation possibly gave rise to an abnormal expression and inadequate accuracy, which was still an inescapable concern. Hence, we decorated an interlaced CuO@TiO2nanowires (NWs) semiconductor meshwork onto a polydimethylsiloxane film-supported gold nanotubes substrate (Au NTs/PDMS) to construct a flexible photoelectrochemical (PEC) sensing platform. Under white light irradiation, CuO@TiO2NWs synergistically exhibited great stretchability and the PEC platform enabled stable photocurrent responses from the reduction of H2O2even during mechanical deformation. Moreover, the admirable biocompatibility and an almost negligible open circuit voltage of +0.18 V for the CuO@TiO2NWs/Au NTs/PDMS sensor guaranteed human umbilical vein endothelial cells (HUVECs) adhesion tightly thereon even under continuous illumination for 30 min. Finally, the as-proposed stretchable PEC sensor achieved sensitive and true-to-life monitoring of transient H2O2release during HUVECs deformation, in which H2O2release was positively correlated to mechanical strains. This investigation opens a new shade path on in situ cellular sensing and meanwhile greatly expands the application mode of the PEC approach.

The development of highly sensitive and precise imaging techniques capable of visualizing crucial molecules at the subcellular level is essential for elucidating mitochondrial functions and uncovering novel mechanisms in biological processes. However, traditional molecular imaging strategies are still limited by off-mitochondria signal leakage because of the “always-active” sensing mode. To address this limitation, we have developed a light-triggered activation sequence activated plasmonic DNAzyme walker (PDW) for accurate subcellular molecular imaging by the combination of an organelle localized strategy, upconversion nanotechnology, and a plasmon enhanced fluorescence (PEF) technique. Exploiting the advantage of light activation enables precise control over when and where to activate the probe’s sensing function, effectively reducing off-mitochondria signal leakage as validated by the dynamic monitoring of changes in off-mitochondria signals during the mitochondrial entry process. Furthermore, by leveraging the PEF capability of triangular gold nanoprisms (Au NPRs), the fluorescence intensity can be enhanced by approximately 11.9 times, ensuring highly sensitive and accurate subcellular molecular imaging.

Detection and quantification of viral particles (VPs) facilitate both diagnostics of pathogenic viruses and quality control testing of virus-based products. However, existing technologies fail to afford concurrent ultrasensitive detection and large-scale absolute quantification of VPs. Here, we propose a digital Microgel-in-Droplet enzyme-linked immunosorbent assay (ELISA) system that enables the processing and monitoring of millions of ELISA reactions at the single-VP level by incorporating droplet microfluidics with sandwich ELISA. Upon validating the microfluidic workflow and optimizing ELISA parameters, we demonstrate ultrasensitive VP detection at a limit of detection of 56 PFU/test. Leveraging a fluorescence-based screening platform, we further realize high-throughput digital counting of VPs with a linear detection range of 500–64 000 PFU/test. The precision is comparable to that of the gold standard, the plaque assay, across a wide range of virus concentrations. We anticipate that our system will provide a novel paradigm for the absolute enumeration of various types of viral particles.

Reference electrode (RE) plays the core role in accurate potential control in electrochemistry. However, nanoresolved electrochemical characterization techniques still suffer from unstable potential control of pseudo-REs, because the commercial RE is too large to be used in the tiny electrochemical cell, and thus only pseudo-RE can be used. Therefore, microsized RE with a stable potential is urgently required to push the nanoresolved electrochemical measurements to a new level of accuracy and precision, but it is quite challenging to reproducibly fabricate such a micro RE until now. Here, we revisited the working mechanism of the metal-junction RE and clearly revealed the role of the ionic path between the metal wire and the borosilicate glass capillary to maintain a stable potential of RE. Based on this understanding, we developed a method to fabricate micro ultrastable-RE, where a reproducible ultrathin ionic path can form by dissolving a sandwiched sacrificial layer between the Pt wire and the capillary for the ion transfer. The potential of this new micro RE was almost the same as that of the commercial Ag/AgCl electrode, while the size is much smaller. Different from commercial REs that must be stored in the inner electrolyte, the new RE could be directly stored in air for more than one year without potential drift. Eventually, we successfully applied the micro RE in the electrochemical tip-enhanced Raman spectroscopy (EC-TERS) measurement to precisely control the potential of the working electrode, which makes it possible to compare the results from different laboratories and techniques to better understand the electrochemical interface at the nanoscale.

Enhancing the electrochemiluminescence (ECL) properties of polycyclic aromatic hydrocarbons (PAHs) is a significant topic in the ECL field. Herein, we elaborately chose PAH derivative luminophore 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4TBAPy) as the organic ligand to synthesize a new Ru-complex-free ECL-active metal–organic framework Dy-TBAPy. Interestingly, Dy-TBAPy exhibited a more brilliant ECL emission and higher ECL efficiency than H4TBAPy aggregates. On the one hand, TBAPy luminophores were assembled into rigid MOF skeleton via coordination bonds, which not only enlarged the distance between pyrene cores to eliminate the aggregation-caused quenching (ACQ) effect but also obstructed the intramolecular motions of TBAPy to diminish the nonradiative relaxation, thus realizing a remarkable coordination-enhanced ECL. On the other hand, the ultrahigh porosity of Dy-TBAPy was beneficial to the diffusion of electrons, ions, and coreactant (S2O82–) in the skeleton, which efficiently boosted the excitation of interior TBAPy luminophores and led to a high utilization ratio of TBAPy, further improving ECL properties. More intriguingly, the ECL intensity of the Dy-TBAPy/S2O82–system was about 4.1, 87.0-fold higher than those of classic Ru(bpy)32+/TPrA and Ru(bpy)32+/S2O82–systems. Considering the aforementioned fabulous ECL performance, Dy-TBAPy was used as an ECL probe to construct a supersensitive ECL biosensor for microRNA-21 detection, which showed an ultralow detection limit of 7.55 aM. Overall, our study manifests that coordinatively assembling PAHs into MOFs is a simple and practicable way to improve ECL properties, which solves the ACQ issue of PAHs and proposes new ideas for developing highly efficient Ru-complex-free ECL materials, therefore providing promising opportunities to fabricate high-sensitivity ECL biosensors.

Metformin (MET) is currently the first-line treatment for type 2 diabetes mellitus (T2DM). However, overdose and long-term use of MET may induce a serious liver injury. What’s worse, diagnosis of MET-induced liver injury remains challenging in clinic. Although several probes have been reported for imaging MET-induced liver injury utilizing upregulated hepatic H2S as a biomarker, they are still at risk of nonspecific activation in complex physiological environments and rely on light excitation with limited imaging depth. Herein, we rationally designed and developed a dual-locked probe, DPA-H2S, for precise imaging of MET-induced liver injury by H2S-activated sonoafterglow luminescence. DPA-H2S is a small molecule consisting of a sonosensitizer protoporphyrin IX (PpIX) and an afterglow substrate that is dual-locked with a H2S-responsive 2,4-dinitrobenzene group and a 1O2-responsive electron-rich double bond. When employing DPA-H2S for imaging of MET-induced liver injury in vivo, since the PpIX moiety can produce 1O2in situat the liver site under focused ultrasound (US) irradiation, the two locks of DPA-H2S can be specifically activated by the highly upregulated H2S at the liver injury sites and the in situgenerated 1O2, respectively. Thus, the sonoafterglow signal of DPA-H2S is significantly turned on, enabling precise imaging of the MET-induced liver injury. In vitroresults showed that, through H2S-activated sonoafterglow luminescence, DPA-H2S was capable of imaging H2S with good sensitivity and high selectivity and realized deep tissue imaging (∼20 mm, signal-to-background ratio (SBR) = 3.4). Furthermore, we successfully applied DPA-H2S for precise in vivoimaging of MET-induced liver injury. We anticipate that our dual-locked probe, DPA-H2S, may serve as a promising tool in assisting the diagnosis of MET-induced liver injury in clinics and informing the clinical utilization of MET in the near future.

Long nanowires offer an increased surface area for biomolecule immobilization, facilitating enhanced binding capacity and sensitivity in the detection of target analytes. However, robust long-nanowire fabrication remains a significant challenge. In this paper, we developed a novel construction of a micro chemical pen (MCP), called a clean-assisted micro chemical pen (CAMCP), for robust long-nanowire fabrication. CAMCP, based on localized hydrodynamic flow confinement, was conducted by incorporating a clean phase to effectively dissolve aggregated silver particles in the aspiration channel’s shell, thereby enhancing the MCP’s longevity by 60.84%, allowing for an 840 μm extension in nanowire patterning capability. A 4600-aspect ratio (length:1200 μm, width: 260 nm) nanowire was fabricated by CAMCP and utilized as a nanowire sensor, showing a 39.7% increase in IgA detection sensitivity compared to a 3000-aspect ratio sensor. Furthermore, the longer nanowire sensor exhibited enhanced signal responses, a higher signal-to-noise ratio, and a lower limit of detection (LOD). The preponderant bioassay performances of the longer nanowire sensor in bioassays, facilitated by CAMCP, open up its possibilities for chemical-synthesis nanowires (NWs) in ultrasensitive biodetection.

Hydrogen sulfide (H2S) is a gaseous signaling molecule that regulates various physiological and pathological processes in the central nervous system. It is vital to develop an effective method to detect H2S in vivo to elucidate its critical role. However, current fluorescent probes for accurate quantification of H2S still face big challenges due to complicated fabrication, small Stokes shift, unsatisfactory selectivity, and especially delayed response time. Herein, based on simple postsynthetic modification, we present an innovative strategy by confining H2S-triggered thiolysis of dinitrophenyl (DNP) ether within a luminescent metal–organic framework (MOF) to address those issues. Due to the cleavage of the DNP moiety by H2S, the nanoprobe gives rise to a remarkable fluorescence turn-on signal with a large Stokes shift of 190 nm and also provides high selectivity to H2S against various interferents including competing biothiols. In particular, by virtue of the unique structural property of the MOF, it exhibits an ultrafast sensing ability for H2S (only 5 s). Moreover, the fluorescence enhancement efficiency displays a good linear correlation with H2S concentration in the range of 0–160 μM with a detection limit of 0.29 μM. Importantly, these superior sensing performances enable the nanoprobe to measure the basal value and monitor the change of H2S level in the rat brain.

Real-time monitoring of the structural evolution of battery materials is crucial for understanding their underlying reaction mechanisms, which cannot be satisfied by the typically used post-mortem analysis. While more and more operandotechniques were constructed and employed, they are all based on ambient working conditions that are not generally the case for real-world applications. Indeed, batteries work in an environment where self-heat dissipation increases the surrounding temperature, and extreme temperature applications (<−20 °C or >60 °C) are also frequently proposed. Operandocharacterization techniques under variable temperatures are therefore highly desired for tracking battery reactions under real-working conditions. Here, we develop a methodology to operandomonitor the electronic and geometrical structures of battery materials over a wide range of temperatures based on X-ray spectroscopies. It is substantiated with data collected on a model LiNi0.90Co0.05Mn0.05O2/Si@C pouch cell under operandoquick X-ray absorption fine structure spectroscopy, by which we found a temperature-dependent structure evolution behavior that is highly correlated with the electrochemical performance. Our work establishes an exemplary protocol for analyzing battery materials under temperature-variable environments that can be widely used in other related fields.

The establishment of rapid target identification and analysis methods for antibiotic resistance genes (ARGs) is urgently needed. In this study, we unprecedently designed a target-catalyzed hairpin assembly (CHA) electrochemiluminescent (ECL) biosensor for the ultrasensitive detection of ampicillin resistance genes (ARGAMP) based on a novel, efficient near-infrared ruthenium carbene complex/TPrA/PEI ternary ECL system with low oxidation potential. The ternary NIR-ECL system illustrated in this work displayed double ECL intensity in comparison with their corresponding traditional binary ECL system. The as-prepared ECL biosensor illustrated in this work demonstrates highly selective and sensitive determination of ARGAMPfrom 1 fM to 1 nM and a low detection limit of 0.23 fM. Importantly, it also exhibits good accuracy and stabilities to identify ARGAMPin plasmid and bacterial genome DNA, which demonstrates its excellent reliability and great potential in detecting ARGAMPin real environmental samples.

Two-dimensional violet phosphorus (VP) has emerged as a new sensing material in various sensing applications due to its unique electrical properties and high stability among allotropes of phosphorus. Currently, the research of the VP-based analysis method is at the early stage. In this work, a VP nanosheet-based field-effect transistor (FET) sensor is reported for the detection of NO2and N2O gases with extraordinary sensing performance. This sensor can achieve excellent sensitivity of up to ∼50% current change/ppm and a low detection limit of 5.9 ppb and enables the NO2analysis in various mixed gases. Moreover, this sensor can effectively distinguish between NO2and N2O gases, which is a big challenge for current FET or chemiresistor gas sensors. The different sensing behaviors of the VP sensor to NO2and N2O gases have been investigated, and the mechanism study shows that the adsorption energy, bond length of the gas molecule on the VP surface, and the decomposition of N2O led to the differential responses. This work is one of the pioneer studies of VP gas sensors and presents a new sensing method for the discriminative analysis of NO2and N2O for greenhouse gas emission monitoring and air quality control.