Search

The expression of human epidermal growth factor receptor-2 (HER2) has important implications for pathogenesis, progression, and therapeutic efficacy of breast cancer. The detection of its variation during the treatment is crucial for therapeutic decision-making but remains a grand challenge, especially at the cellular level. Here, we develop a machine learning-driven surface-enhanced Raman spectroscopy (SERS)-integrated strategy for label-free detection of cellular HER2. Specifically, our method allows the extraction of cell-rich spectral signatures utilized for identification and classification of cancer cells with distinct HER2 expression with a high accuracy of 99.6%. By combining label-free SERS detection and machine learning-driven chemometric analysis, we are able to perform longitudinal monitoring of therapeutic efficacy at the cellular level during the treatment of HER2+ breast cancer, which aids in the subsequent decision-making and management. This work provides a promising technique capable of performing dynamic label-free spectroscopic detection for therapeutic surveillance of diseases.

Trace analyte detection in a complex environment such as in seawater is usually challenging for classic redox-based electrochemical sensors since the matrix effect of high salinity and various interfering species with similar redox properties can generate false positive/negative signals, thus impacting the sensitivity and specificity of the sensors. In this work, unlike redox-based approaches, we propose a novel sensing mode that relies on dual-modulated interfacial energy barriers of heterojunctions. By constructing the hierarchical structure of Ni/TiO

It is challenging to measure the heating-induced mass change of the material during its morphological/structural evolution process. Herein, a silicon microreactor is developed for thermogravimetric-transmission electron microscopy synchronous analysis (TG-TEM synchronous analysis). A self-heating resonant microcantilever for mass-change detection and a dummy microcantilever with electron-beam transparent SiN

The dynamic behaviors of particles in various physical fields are related to the physicochemical properties of particles. Herein, we focus on the relationship between surface charge and dynamic behaviors of particles at the orifice of a nanopipette. We interestingly find that angle θ, a parameter related to the asymmetric degree of current spike, exhibits a strong relationship with surface charge of the particles. Both theoretical derivation and finite element simulation validate this relationship and thus could be used for quantifying the surface charge of single particles. Moreover, the gold and silica nanoparticles with the same size but different surface charges could be well distinguished and identified based on this relationship. This study not only gives a comprehensive understanding on the dynamic behaviors of particles outside the nanopipette but also opens a new way for investigating the surface charge of single particles.

Using boron as a test analyte, laser ablation (LA) solution sampling multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) is proposed and validated as a fast method for isotopic analysis in natural liquids and digested samples without any prior purification process. We demonstrated that the solution reference standard can be used as a bracketing standard for in situ δ

Water-in-oil-in-water (w/o/w) double emulsion (DE) encapsulation has been widely used as a promising platform technology for various applications in the fields of food, cosmetics, pharmacy, chemical engineering, materials science, and synthetic biology. Unfortunately, DEs formed by conventional emulsion generation approaches in most cases are highly polydisperse, making them less desirable for quantitative assays, controlled biomaterial synthesis, and entrapped ingredient release. Microfluidic devices can generate monodisperse DEs with controllable size, morphology, and production rate, but these generally require multistep fabrication processes and use of different solvents or bulky external instrumentation to pattern channel wettability. To overcome these limitations, we propose a rapid, simple, and inexpensive method to spatially pattern wettability in microfluidic devices for the continuous generation of monodisperse DEs. This is achieved by applying corona-plasma treatment to a select zone of the microchannel surface aided by a custom-designed corona resistance microchannel to strictly confine the plasma-treatment zone in a single polydimethylsiloxane (PDMS) microfluidic device. The properties of PDMS channel surfaces and key microchannel regions for DE generation are characterized under different levels of treatment. The size, shell thickness, and number of inner cores of generated DEs are shown to be highly controllable by tuning the phase flow rate ratios. Using DEs as templates, we successfully achieve a one-step generation and collection of gelatin microgels. Additionally, we demonstrate the biological capability of generated DEs by flow cytometric screening of the encapsulation and growth of yeast cells within DEs. We expect that the proposed approach will be widely used to create microfluidic devices with more complex wettability patterns.

Single-atom catalysis efficiently exposes the catalytic sites to reactant molecules while rendering opportunity to investigate the catalysis mechanisms at atomic levels for scientific insights. Here, for the first time, atomically dispersed Co atoms are synthesized as biomimetic "enzymes" to monitor superoxide anions (O2•-), delivering ultraordinary high sensitivity (710.03 μA·μM-1·cm-2), low detection limit (1.5 nM), and rapid response time (1.2 s), ranking the best among all the reported either bioenzymatic or biomimetic O2•- biosensors. The sensor is further successfully employed to real-time monitor O2•- released from living cells. Moreover, theoretical calculation and analysis associated with experimental results discover that a mode of end adsorption of the negatively charged O2•- on the Co3+ atom rather than a bridge or/and side adsorption of the two atoms of O2•- on two Co3+ atoms, respectively, plays an important role in the single-atomic catalysis toward O2•- oxidation, which not only facilitates faster electron transfer but also offers better selectivity. This work holds great promise for an inexpensive and sensitive atomic biomimetic O2•- sensor for bioresearch and clinic diagnosis, while revealing that the adsorption mode plays a critical role in single-atom catalysis for a fundamental insight.

Today, a lot of attention is being paid to the pre-miRNAs/miRNAs or activity of Dicer due to their important functions in various physiological processes. Especially, the intrinsic relationship among these associated targets is of significant importance for more in-depth research on the mechanism of disease formation and early diagnosis. Herein, a strategy for simultaneous bioanalysis of miRNAs/pre-miRNAs and Dicer enzyme based on the self-designed multi-path nucleic acid amplification technology was proposed. Typically, in the presence of pre-miRNA-155, it can hybridize with Helper to generate a structure with two new toeholds, one of which could react with H1, H2, and H3, performing a modified CHA reaction with obvious fluorescence responses of FAM, and another of which could hybridize with H4, H5, and H6 to construct the [H4-H5-H6]

Development of new principles and techniques at the single-cell level is significantly important since cells as basic units of living organisms always bear large heterogeneity. Herein, we demonstrate a new electrochemical principle for single-cell analysis based on an ion current blockage at the orifice of a nanopipette, defined as resistance cytometry. The amplitude and the frequency of ion current transients show strong dependence on the size and the concentration of cells, which could be used for in situ cell sizing and counting. This technique shows good ability to detect the size change of RBCs under stimulations of different pH and osmotic pressure values. More importantly, the as-presented resistance cytometry can distinguish lymphoma blood cells from normal blood cells for patient blood samples. The as-presented resistance cytometry is label-free, non-invasive, and non-destructive, which not only opens new opportunities for single-cell analysis but also provides a new platform for cell-related medical diagnostic technologies.

Yeast Saccharomyces cerevisiae (S. Cerevisiae) is one of the most attractive microbial species used for industrial production of value-added products and is an important model organism to understand the biology of the eukaryotic cells and humans. S. Cerevisiae has different shapes, such as spherical singlets, budded doublets, and clusters, corresponding to phases of the cell cycle, genetic, and environmental factors. The ability to obtain high-purity populations of uniform-shaped S. Cerevisiae cells is of significant importance for a wide range of applications in basic biological research and industrial processes. In this work, we demonstrate shape-based separation and enrichment of S. Cerevisiae using a coflow of viscoelastic and Newtonian fluids in a straight rectangular microchannel. Due to the combined effects of lift inertial and elastic forces, this label-free and continuous separation arises from shape-dependent migration of cells from the Newtonian to the non-Newtonian viscoelastic fluid. The lateral position of S. Cerevisiae cells with varying morphologies is found to be dependent on cell major axis. We also investigate the effects of sheath and sample flow rate, poly(ethylene oxide) (PEO) concentration and channel length on the performance of the viscoelastic microfluidic device for S. Cerevisiae enrichment and separation by shape. Moreover, the separation efficiency, cell extraction yield, and cell viability after sorting operations are studied.

Single-cell analysis facilitates perception into the most essential processes in life's mysteries. While it is highly challenging to quantify them at the single-cell level, where precise single-cell sampling is the prerequisite. Herein, a real-time single-cell quantitative platform was established for high-throughput droplet-free single-cell sampling into time-resolved (TRA) ICP-MS and real-time quantification of intracellular target elements. The concentrated cells (2 × 106 cells mL-1) were spontaneously and orderly aligned in a spiral microchannel with 104 periodic dimensional confined micropillars. The quantification is conducted simultaneously by internal standard inducing from another branch channel in the chip. The flow-rate-independent feature of single-cell focusing into an aligned stream within a wide range of fluidic velocities (100-800 μL min-1) facilitates high-throughput, oil-free, single-cell introduction into TRA-ICP-MS. The system was used for real-time exploration of intracellular antagonism of Cu2+ against Cd2+. an obvious antagonistic effect was observed for the MCF-7 cell by culturing for 3, 6, 9, and 12 h with 100 μg L-1 Cd2+ and 100 μg L-1 Cu2+, and a rivalry rate of 12.8% was achieved at 12 h. At identical experimental conditions, however, limited antagonistic effect was encountered for a bEnd3 cell within the same incubation time period, with a rivalry rate of 4.81%. On the contrary, an antagonistic effect was not observed for the HepG2 cell by culturing for 6 h, while an obvious antagonistic effect was found by further culturing to 12 h, with a rivalry rate of 10.43%. For all three cell lines, significant heterogeneity was observed among individual cells.

Ion mobility (IM) has been increasingly used in combination with mass spectrometry (MS) for chemical and biological analysis. While implementation of IM with MS usually requires complex instrumentation with delicate controls, in this study we explored the potential of performing IM separation using dual-linear ion traps (LITs) in a miniature mass spectrometer, which was originally developed for performing comprehensive MS/MS scan functions with a simple instrumentation configuration. The IM separation was achieved by ion transfer between the LITs with dynamic gas flow. Its performance was characterized for analysis of a broad range of chemical and biological compounds including small organic compounds such as trisaccharides, raffinose, cellotriose, and melezitose, as well as protein conformers. The demonstrated technique serves as another example of developing powerful hybrid instrument functions with simple configurations and miniaturized sizes.

Alkaline phosphatase (ALP) plays critical roles in signal transmission and cell growth/apoptosis. Its abnormal level in serum/cell is tightly related to diseases, thus, serum and cellular ALP detection is of great significance for disease diagnosis. Herein, a novel approach for ALP assay based on a satellite-nanostructure is developed by conjugating lanthanide upconversion nanoparticles (UCNPs) with silver nanoclusters (AgNCs) through DNA bridging. UCNPs serve as the cores to conjugate with DNA fragments, followed by assembly of AgNCs as the satellites on UCNPs surface through the AgNCs-cytosine affinity, to produce the satellite-nanostructure of UCNPs@DNA-AgNCs. The presence of ALP converts phosphate groups into hydroxyl groups at DNA helix, weakening the coordination of DNA with UCNPs. As a result, the satellite AgNC labeling on DNA fragments strips off the UCNP surface. Silver is quantified by measuring isotope 107Ag with ICP-MS, which further derives the content of ALP by correlation to the number of AgNCs. A linear calibration range is obtained in 0.005-120 U/L with a detection limit of 1.8 mU/L. The distinct advantage of this strategy, on one hand, is the substrate-free feature that eliminates the intermediate process of substrate reaction, where the substrate activity decrease and its instability may significantly deteriorate the sensitivity. On the other hand, ALP triggers the production of a large number of AgNCs resulting in substantial amplification on ICP-MS signal to give a favorable sensitivity. This is the first attempt for ALP detection by inductively coupled plasma mass spectrometry.

While advances in microfluidics have enabled rapid and highly integrated detection of nucleic acid targets, the detection sensitivity is still unsatisfactory in the current POC (point-of-care) detection systems, especially for low abundance samples. In this study, a chip that integrates rapid nucleic acid extraction based on IFAST (immiscible phase filtration assisted by surface tension) and digital isothermal detection was developed to achieve highly sensitive POC detection within 60 min. Based on the interface theory, the factors influencing the interface stability of the IFAST process were studied, and the IFAST nucleic acid extraction conditions were optimized to increase the nucleic acid extraction recovery rate to 75%. Spiral mixing channel and flow-focusing droplet generation structure were designed to achieve the mixing and sample partitioning by applying negative pressure. A portable microdroplet fluorescence detection device was developed based on smartphone imaging. Validation tests were carried out for quantification of low-abundance cfDNA and detection of mutations.

In this work, a novel integrated dielectric barrier discharge (IDBD) reactor coupled to an electrothermal vaporizer (ETV) was established for arsenic determination. It is for the first time gas-phase enrichment (GPE) was fulfilled based on the hyphenation of ETV and DBD. The mechanisms of evolution of arsenic atomic and molecular species during vaporization, transportation, trapping, and release processes were investigated via X-ray photoelectron spectroscopy (XPS) and other approaches. Tentative mechanisms were deduced as follows: the newly designed DBD atomizer (DBDA) tube upstream to the air inlet fulfills the atomization of arsenic nanoparticles in vaporized aerosol, leading to free arsenic atoms that are indispensable for forming arsenic oxides; the DBD trap (DBDT) tube traps arsenic oxides under an O2-domininating atmosphere and then releases arsenic atoms under H2-dominating atmospheres. In essence, this process is a physical-chemical process rather than an electrostatic particle deposition. Such a trap and release sequence separates matrix interference and enhances analytical sensitivity. Under the optimized conditions, the method detection limit (LOD) was 0.04 mg/kg and the relative standard deviations (RSDs) were within 6% for As standard solution and real seafood samples, indicating adequate analytical sensitivity and precision. The mean spiked recoveries for laver, kelp, and Undaria pinnatifida samples were 95-110%, and the results of the certified reference materials (CRMs) were consistent with certified values. This ETV-DBD preconcentration scheme is easy and green and has low cost for As analysis in seafood samples. DBD was proved a novel ETV transportation enhancement and preconcentration technique for arsenic, revealing its potential in rapid arsenic analysis based on direct solid sampling ETV instrumentation.

Pancreatic cancer is known to have a high mortality rate, and its early diagnosis remains challenging due to the occult location of the pancreas. Exosomes derived from pancreatic cancer cells specifically express glypican-1, which may provide a liquid biopsy opportunity for the early diagnosis of pancreatic cancer. Herein, an inductively coupled plasma mass spectrometry (ICP-MS) and photothermal dual-readout platform was proposed for the ultrasensitive and point-of-care analysis of pancreatic cancer exosomes. In our design, exosomes were specifically captured by the sandwich immunoassay, and simultaneously, alkaline phosphatase was introduced in a low-background manner. The alkaline phosphatase triggered the hydrolysis of l-ascorbic acid 2-phosphate to produce ascorbic acid, followed by the etching of Fe3O4@MnO2 nanoflowers. As a result, the Mn2+ generated by etching stripped off the Fe3O4 and was quantified using ICP-MS. Meanwhile, the reduced Fe3O4@MnO2 was applied for the photothermal assay by oxidizing dopamine with MnO2. The protocol exhibits a detection limit down to 19.1 particles mL-1, which is the most sensitive protocol reported so far. To our knowledge, this is the first endeavor for exosome quantification using ICP-MS and photothermal methods. The developed dual-readout platform not only is capable of distinguishing pancreatic cancer patients from healthy people, but also shows excellent discernibility of individual differences at low concentrations of exosomes. This dual-readout assay is a promising platform for the ultrasensitive and point-of-care detection of exosomes in liquid biopsy-based early cancer diagnosis.

A two-dimensional cytometry platform (CytoLM) with high sensitivity and high temporal resolution is developed for single-particle and single-cell sampling and analysis. First, a Dean flow-assisted vortex capillary cell sampling (VCCS) unit confines the sample stream in curved flow and drives to focus and align the particles or cells in a small probe volume. By coupling VCCS to a laser-induced fluorescence (LIF) detector with data acquisition and processing capability, a high-throughput single-particle/cell analysis system (VCCS-LIF) was established. The particle analysis throughput of 119.42/s and a detection recovery of 78.20 ± 1.75% were achieved at a density of 9.16 × 104/mL for fluorescent particles, and the cell analysis throughput is 48.20/s at a density of 1.5 × 105/mL. Second, the CytoLM platform is constructed by hyphenating VCCS-LIF with inductively coupled plasma mass spectrometry (ICP-MS). In the analysis of HepG2 cells by Ag+ incubation and AO staining, 10,760 fluorescence bursts and 3068 MS events were observed in 240 s. Invalid signals due to undispersed cells were controlled at 3.80% for LIF and 1.01% for MS, with a proportion of effective signal of >96.20%. After peak identification and integral processing of the original data, the statistical results including peak area, height, width, and spacing are obtained concurrently and the information on concentration and elemental quantification of single cells is evaluated. CytoLM facilitates high-throughput, multi-dimensional, and multi-parameter characterization of particles and cells, and it may provide vast potential in life science analysis.

ICP-MS is powerful in evaluating elemental species at the single-cell level, where high throughput/efficiency/precision are the keys for achieving statistically significant information based on massive data. We report an ultrahigh-throughput single-cell sampling system, consisting of a 3D spiral-helix tubing array to facilitate single-cell focusing into an orderly flow by inertial lift force and

The timely warning of the germination of bacterial spores and their prevention are highly important to minimize their potential detrimental effects and for disease control. Thus, a sensitive and selective assay of biomarkers is most desirable. In this work, a nanoprobe is constructed by conjugating lanthanide upconversion nanoparticles (UCNPs) with sodium tripolyphosphate (TPP) and eriochrome black T (EBT). The nanoprobe, UCNPs-TPP/EBT, serves as a platform for the detection of the anthrax biomarker, dipicolinic acid (DPA). In principle, DPA displaces EBT from the UCNPs-TPP/EBT nanoconjugate, resulting in a color change from magenta to blue because of the release of free EBT into the aqueous solution. The binding sites on UCNPs are partly preblocked with TPP as the placeholder molecule, leaving a desired number of binding sites for EBT conjugation. On the basis of this dye displacement reaction, a novel colorimetric assay protocol for DPA is developed, deriving a linear calibration range from 2 to 200 μM with a detection limit of 0.9 μM, which is well below the infectious dose of the spores (60 μM). The assay platform exhibits excellent anti-interference capability when treating a real biological sample matrix. The present method is validated by the analysis of DPA in human serum, and its practical application is further demonstrated by monitoring the DPA release upon spore germination.

Separation speed and resolution are two important figures of merit in chromatography. Often, one gains the speed at the cost of the resolution, and vice versa. Scientists have employed short-packed columns for ultrafast separations but encountered challenges such as limited mobile phase velocity, extra-column effect caused band broadening, and column packing difficulty. We have recently demonstrated ultrahigh resolutions of narrow open tubular liquid chromatography (NOTLC); this allows us to trade some of the resolution for speed. In this work, we explored NOTLC for ultrafast LC separations. We used a 2.7 cm (effective length) narrow open tubular (NOT) column and showed a baseline separation of 6 amino acids in less than 700 ms. Ways to further increase the speed were discussed. Using short narrow open tubular (NOT) columns to perform ultrafast separation we overcame the challenges from using short packed columns. To demonstrate the feasibility of using this ultrafast separation technique for practical applications, we separated complex protein digests; peptides were nicely resolved in ∼1 min.

The discrimination of various sulfur -containing species helps us to deeply understand how sulfur affects cellular signaling and other physiological events. Herein, we present a three-dimensional sensor array based on simultaneous variation of the optical properties (fluorescence, light scattering, and UV–vis absorption) of gold–silver alloy nanocluster (AuAgNCs)–gold nanoparticle (AuNPs) composite for the rapid identification of 13 sulfur-containing species and sulfur-oxidizing bacteria. The sensor array is fabricated based on the strong coordination interactions between sulfur-containing compounds and AuAgNCs on the surface of AuNPs. The sulfur species of interest exhibit different affinities toward AuAgNCs and generate unique optical properties. These response patterns could divide the analytes into three categories including organic sulfide, inorganic sulfide, and thiols. Thirteen types of sulfur species including cystine, methionine, GSSG, S2–, SO32–, S2O32–, S2O72–, S2O82–, S4O62–, GSH, N-acetyl-l-c...

Hydrophilic interaction liquid chromatography-mass spectrometry (HILIC-MS) is a complementary technique to reversed-phase liquid chromatography-mass spectrometry (RPLC-MS) and has been widely used to expand the coverage of the metabolome in MS-based metabolomics. However, the use of HILIC retention time (HILIC RT) in metabolites annotation is quite limited because of its poor reproducibility. Here, we developed a method to calculate the retention index in HILIC (HILIC RI) for calibration of HILIC RT. In this method, a mixture of 2-dimethylaminoethylamine (DMED)-labeled fatty acid standards with carbon chain length from C2 to C22 were selected as calibrants to establish a linear calibration equation between HILIC RT and carbon number for the calculation of HILIC RI. The calculated HILIC RIs based on a regression equation could efficiently calibrate the retention time shifts for 28 DMED-labeled carboxyl standards and DMED-labeled carboxyl metabolites in rat urine, serum and feces on a HILIC column with different gradient elution conditions. Furthermore, the developed HILIC RI strategy was applied to RT calibration of screened metabolites, the annotation of isomers in HILIC-MS-based metabolomics analysis for real samples, and the correction of isotope effects in chemical isotope labeling HILIC-MS analysis. Taken together, the resulting HILIC RI strategy is a promising analytical technique to improve the accuracy of metabolite annotation; it would be widely used in HILIC-MS-based metabolome analysis.

Although droplet-based microfluidics has been broadly used as a versatile tool in biology, chemistry, and nanotechnology, its rather complicated microfabrication process and the requirement of specialized hardware and operating skills hinder researchers fully unleashing the potential of this powerful platform. Here, we develop an integrated microdroplet generator enabled by a spinning conical frustum for the versatile production of near-monodisperse microdroplets in a high-throughput and off-chip manner. The construction and operation of this generator are simple and straightforward without the need of microfabrication, and we demonstrate that the generator is able to passively and actively control the size of the produced microdroplets. In addition to water microdroplets, this generator can produce microdroplets of liquid metal that would be difficult to produce in conventional microfluidic platforms as liquid metal has high surface tension. Moreover, we demonstrate that this generator can produce solid hydrogel microparticles and fibers using integrated ultraviolet (UV) light. In the end, we further explore the ability of this generator for forming double emulsions by coflowing two immiscible liquids. Given the remarkable abilities demonstrated by this platform and the tremendous potential of microdroplets, this user-friendly method may revolutionize the future of droplet-based chemical synthesis and biological analysis.

Cross-linking mass spectrometry (XL-MS) has made significant progress in understanding the structure of protein and elucidating architectures of larger protein complexes. Current XL-MS applications are limited to targeting lysine, glutamic acid, aspartic acid, and cysteine residues. There remains a need for the development of novel cross-linkers enabling selective targeting of other amino acid residues in proteins. Here, a novel simple cross-linker, namely, [4,4'-(disulfanediylbis(ethane-2,1-diyl)) bis(1,2,4-triazolidine-3,5-dione)] (DBB), has been designed, synthesized, and characterized. This cross-linker can react selectively with tyrosine residues in protein through the electrochemical click reaction. The DBB cross-links produced the characteristic peptides before and after electrochemical reduction, thus permitting the simplified data analysis and accurate identification for the cross-linked products. This is the first time a cross-linker is developed for targeting tyrosine residues on protein without using photoirradiation or a metal catalyst. This strategy might potentially be used as a complementary tool for XL-MS to probe protein 3D structures, protein complexes, and protein-protein interaction.

Yeast

Stochastic DNA walkers capable of traversing on three-dimensional (3D) tracks have received great deal of attention. However, DNA walker-based biosensors exhibit limited amplification efficiency because of their slow walking kinetics and low processivity. Herein, by taking advantage of the high processivity of a DNA rolling machine, a sensitive ratiometric DNA nanomachine biosensor is designed. The biosensor is constructed with hairpin-loaded Au nanoparticles (NPs) (hpDNA@AuNPs) as a DNA walker and AgNCs-decorated magnetic NPs (AgNCs@MNPs) as a DNA rolling machine. In the presence of target DNA, exonuclease III (Exo III)-powered DNA walker is activated to accomplish first-stage amplification via a burnt-bridge mechanism, generating a great deal of toehold-loaded AuNPs (Toehold@AuNPs) to hybridize with magnetic nanoparticles loaded with silver-nanoclusters-labeled DNA (AgNCs@MNPs) with the assistance of Exo III. These trigger rapid rolling of AuNPs on the AgNCs@MNPs surface and release free AgNCs, converting the biological signal into a mass spectrometric signal ratio (107Ag/197Au) with detection by ICP-MS. A linear range of 0.5-500 fmol L-1 is achieved with a detection limit of 119 amol L-1 for the p53 gene. The practical applicability of the biosensor has been demonstrated in the accurate assay of the p53 gene in the human blood.

Analysis and characterization of micro/nano-sized pore structure are critical issues in shale geology and engineering. Scanning electron microscopy (SEM) imaging is one of the most widespread methods for the analysis of the micro/nano-sized pores in shale, but precise identification of the ultrafine pore structure in shale is still a big challenge because shale is so complex that some components may have overlap with pores based on the simple discrimination of gray scale under SEM microscopy. Here, Fe3O4/Au nanocomposite with magnetic properties is synthesized, characterized, and introduced as a novel pore-marker to improve SEM identification and quantitation of micro/nano-sized pores in shale. Due to the superparamagnetic property, the nanomarker is conveniently controlled by an external magnetic field to fill into pores and offers a sharp contrast imaging between matrix of shale (various gray) and pores (bright), which makes the identification of micro/nano-sized pores in shale much more straightforward...

A highly sensitive platform is developed for the determination of microRNA-21 (miRNA-21) with inductively coupled plasma mass spectrometry (ICPMS). It includes the following operations: Hairpin structures DNA H1 and H2 are designed, and DNA H1 is bound to ultrasmall lanthanide upconversion nanoparticles (UCNPs) to produce UCNPs@DNA conjugate probes. Target miRNA triggers a chain reaction for alternating hybridization between DNA H1 (bound on UCNPs@DNA probe) and DNA H2. This leads to UCNPs accumulation and serves as an efficient amplification strategy for UCNPs. The concentration of miRNA-21 is closely correlated to the number of UCNPs; thus, the detection of 89Y by ICPMS provides a promising approach for miRNA quantification. This protocol exhibits high sensitivity to miRNA-21 within 0.1-500 fM, along with a detection limit of 41 aM, which is among the hitherto reported most sensitive procedures. It is worth mentioning that rare earth elements are scarcely present in living systems, which minimizes the background for ICPMS detection and excludes potential interferences from the coexisting species, which is most suited for biological assay.

Microalgal biofuels and biomass have ecofriendly advantages as feedstocks. Improved understanding and utilization of microalgae require large-scale analysis of the morphological and metabolic heterogeneity within populations. Here, with Euglena gracilis as a model microalgal species, we evaluate how fluorescence- and brightfield-derived-image-based descriptors vary during environmental stress at the single-cell level. This is achieved with a new multiparameter fluorescence-imaging cytometric technique that allows the assaying of thousands of cells per experiment. We track morphological changes, including the intensity and distribution of intracellular lipid droplets, and pigment autofluorescence. The combined fluorescence–morphological analysis identifies new metrics not accessible with traditional flow cytometry, including the lipid-to-cell-area ratio (LCAR), which shows promise as an indicator of oil productivity per biomass. Single-cell metrics of lipid productivity were highly correlated (R2 > 0.90, p...

Western-blot (WB) is a powerful analytical technique for protein identification in complex biological samples and has been widely used in biological studies for decades. Detection specificity and sensitivity of WB largely relies on quality of the antibodies and performance of the conjugated HRP. However, the application of WB analysis for the detection of protein post-translational modifications (PTMs) is hampered by the low abundance of protein PTMs and by the limited availability of antibodies that specifically differentiate various kinds of PTMs from their protein substrates. Therefore, new recognition mechanisms and signal amplification strategies for WB analysis of protein PTMs is in high demand. In this work, we prepared a soluble polymer that detects various azide-tagged PTM proteins in WB analysis using triarylphosphine and HRP modified thermoresponsive polymer. Specific and efficient detection of azide-tagged PTM protein is achieved via the bioorthogonal reaction between azide and triarylphosphine. More importantly, the chemiluminiscent signal in the WB analysis is largely amplified by the temperature induced self-assembly of numerous thermoresponsive polymer chains carrying multiple HRPs. As a result, approximately 100 times more sensitive detection than commercial antibodies is achieved by this method using standard PTM proteins. Though, this new reagent does not directly detect native PTMs in cell, tissue or blood samples, it still has important application potential in protein PTM studies, considering the wide availability of azide-tagging techniques to a variety of PTMs.

High time-resolution monitoring of nitrogen dioxide (NO2) is of great importance for studying the formation mechanism of aerosols and improving air quality. Based on the Griess–Saltzman (GS) reaction, a portable NO2 optical sensor was developed by employing a porous polypropylene membrane tube (PPMT) integrated gas permeation collector and detector. The PPMT was filled with GS reagents and covered with a coaxial jacket tube for gas collection. Its two ends were respectively fixed with a yellowish-green light-emitting diode and a photodiode for optic signal reception. NO2 was automatically introduced through the collector by two air pumps cooperating with a homemade gas injector. Under the optimized conditions, the device presented good performance for monitoring NO2, such as a limit of detection of 5.1 ppbv (parts per billion by volume), an intraday precision of 4.1% (RSD, relative standard deviation, n = 11, c = 100 ppbv), an interday precision of 5.7% (RSD, n = 2–3 per day for 5 days, c = 100 ppbv), an ...