Search

Autophagy could play suppressing role in cancer therapy by facilitating release of tumor antigens from dying cells and inducing immunogenic cell death (ICD). Therefore, discovery and rational design of more effective inducers of cytotoxic autophagy is expected to develop new strategies for finding innovative drugs for precise and successful cancer treatment. Herein, we develop MoO3‐x nanowires (MoO3‐x NWs) with high oxygen vacancy and strong photothermal responsivity to ablate tumors through hyperthermia, thus promote the induction of cytotoxic autophagy and severe ICD. As expected, the combination of MoO3‐x NWs and photothermal therapy (PTT) effectively induces autophagy to promote the release of tumor antigens from the ablated cells, and induces the maturation and antigen presentation of dendritic cells (DCs), subsequently activates cytotoxic T lymphocytes (CTLs)‐mediated adaptive immunity. Furthermore, the combination treatment of MoO3‐x NWs with immune checkpoint blockade of PD‐1 could promote the tumor‐associated macrophages (TAMs) polarization into tumor‐killing M1 macrophages, inhibit infiltration of Treg cells at tumor sites, and alleviate immunosuppression in the tumor microenvironment, finally intensify the anti‐tumor activity in vivo. This study provides a strategy and preliminary elucidation of the mechanism of using MoO3‐x nanowires with high oxygen vacancy to induce autophagy and thus enhance photothermal immunotherapy. [ABSTRACT FROM AUTHOR]

Zinc‐air batteries (ZABs) have attracted considerable attention for their high energy density, safety, low noise, and eco‐friendliness. However, the capacity of mechanically rechargeable ZABs was limited by the cumbersome procedure for replacing the zinc anode, while electrically rechargeable ZABs suffer from issues including low depth of discharge, zinc dendrite and dead zinc formation, and sluggish oxygen evolution reaction, etc. To address these issues, we report a hybrid redox‐mediated zinc‐air fuel cell (HRM‐ZAFC) utilizing 7,8‐dihydroxyphenazine‐2‐sulfonic acid (DHPS) as the anolyte redox mediator, which shifts the zinc oxidation reaction from the electrode surface to a separate fuel tank. This approach decouples fuel feeding and electricity generation, providing greater operation flexibility and scalability for large‐scale power generation applications. The DHPS‐mediated ZAFC exhibited a superior peak power density of 0.51 W/cm2 and a continuous discharge capacity of 48.82 Ah with ZnO as the discharge product in the tank, highlighting its potential for power generation. [ABSTRACT FROM AUTHOR]

Transition metal oxide (TMO) anode materials in lithium‐ion batteries (LIBs) usually suffer from serious volume expansion leading to the pulverization of structures, further giving rise to lower specific capacity and worse cycling stability. Herein, by introducing polyoxometalate (POM) clusters into TMOs and precisely controlling the amount of POMs, the MnZnCuOx‐phosphomolybdic acid hybrid sub‐1 nm nanosheets (MZC‐PMA HSNSs) anode is successfully fabricated, where the special electron rich structure of POMs is conducive to accelerating the migration of lithium ions on the anode to obtain higher specific capacity, and the non‐covalent interactions between POMs and TMOs make the HSNSs possess excellent structural and chemical stability, thus exhibiting outstanding electrochemical performance in LIBs, achieving a high reversible capacity (1157 mAh g−1 at 100 mA g−1) and an admirable long‐term cycling stability at low and high current densities. [ABSTRACT FROM AUTHOR]

Two‐dimensional (2D) AIE‐inorganic nanocomposites exhibit high stability and high fluorescence activity. However, limited by the types and properties of 2D inorganic materials, it's challenging to realize complex structures and functions. We designed a quaternary ammonium‐type AIE ligand, TPECholine. We chose TPECholine and POM clusters as building blocks and synthesized a series of single‐layer nanosheets (SLNSs) by assembling LnW10 or P2W18 POM clusters with TPECholine. By regulating the types of POM clusters and ligands, the morphology and fluorescence intensity of the SLNSs can be finely tuned. Due to the restriction of the intramolecular motions of AIEgens by the SLNSs, nanosheets can exhibit promoted quantum yield (up to 76 %). In addition, thanks to the sub‐nanometric sizes and excess surface charges, SLNSs exhibit excellent solvent compatibility, including water, chloroform, ethanol, etc. And the nanosheets showed high fluorescence intensity in these solvents. [ABSTRACT FROM AUTHOR]

Sub‐nanowires (SNWs) exhibit great potential applications in nanocomposites owing to their high specific surface area, high flexibility, and similarity to polymer chains in dimension, which are a good entry point to bridge inorganic materials and polymer materials. Herein, we synthesized hydroxyapatite sub‐nanowires (HAP SNWs) and engineered hydroxyapatite sub‐nanowires/polyimide (HSP) gels and films by simple mixing of HAP SNWs and polyimide (PI). Benefiting from the interactions between HAP SNWs and PI, these nanocomposites were a continuous hybrid network. As the increase of HAP SNWs contents, the viscosity and modulus of HSP gels were greatly improved by one or two orders of magnitude compared with PI gel. HSP films not only maintained high transparency but also gained high haze, as well as exhibited enhanced Young's modulus. Thus, both HSP gels and films developed in this work are promising for various applications in coatings and high‐performance films. [ABSTRACT FROM AUTHOR]

Developing two‐dimensional (2D) and single atomic layered materials is a fascinating challenge. Here we successfully synthesize porphyrin‐based monoatomic layer (PML), a freestanding 2D porphyrin‐based material of monomer‐unit thickness (2.8 Å). The solvothermal method provides a bottom‐up approach for tailoring the monoatomic layer from the nanoscale to the milliscale. PMLs containing accurately tailorable M‐N4 units (M=Cu and Au) were synthesized, which present metal center‐dependent performance for CO2 electrocatalysis. PML with Cu‐N4 centers performs high faradaic efficiencies of HCOO− and CH4 (80.86 % and 11.51 % at −0.7 V, respectively) while PML with Au‐N4 centers generates HCOO− and CO as major products (40.90 % and 34.40 % at −0.8 V, respectively). Irreversible restructuring behavior of Cu sites is also observed. Based on the graphene‐like properties and metal center‐selectivity relationships, we believe that PML will play a distinct role in various applications. [ABSTRACT FROM AUTHOR]

Controlling the interaction of polarization light with an asymmetric nanostructure such as a metal/semiconductor heterostructure provides opportunities for tuning surface plasmon excitation and near‐field spatial distribution. However, light polarization effects on interfacial charge transport and the photocatalysis of plasmonic metal/semiconductor photocatalysts are unclear. Herein, we reveal the polarization dependence of plasmonic charge separation and spatial distribution in Au/TiO2 nanoparticles under 45° incident light illumination at the single‐particle level using a combination of photon‐irradiated Kelvin probe force microscopy (KPFM) and electromagnetic field simulation. We quantitatively uncover the relationship between the local charge density and polarization angle by investigating the polarization‐dependent surface photovoltage (SPV). The plasmon‐induced photocatalytic activity is enhanced when the polarization direction is perpendicular to the Au/TiO2 interface. [ABSTRACT FROM AUTHOR]

Utilizing sustainable energy for chemical activation of small molecules, such as CO2, to produce important chemical feedstocks is highly desirable. The simultaneous production of CO/H2 mixture (syngas) from photoreduction of CO2 and H2O is highly promising. However, the relationships between structure, composition, crystallinity, and photocatalytic performance are still indistinct. Here, amorphous ultrathin CoO nanowires and polyoxometalate incorporated nanowires with even lower crystallinity were synthesized. The POM‐incorporated ultrathin nanowires exhibit high photocatalytic syngas production activity, reaching H2 and CO evolution rates of 11555 and 4165 μmol g−1 h−1 respectively. Further experiments indicate that the ultrathin morphology and incorporation of POM both contribute to the superior performance. Multiple characterizations reveal the enhanced charge–hole separation efficiency of the catalyst would facilitate the photocatalysis. [ABSTRACT FROM AUTHOR]

A single‐step solution‐based strategy is used to obtain 2D Janus‐like free‐standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D‐to‐1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM‐CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM‐CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications. [ABSTRACT FROM AUTHOR]

Multidimensional nano-heterostructures (NHSs) that have unique dimensionality-dependent integrative and synergic effects are intriguing but still underdeveloped. Here, we report the first helical 1D/2D epitaxial NHS between CdS and ZnIn2S4. Experimental and theoretical studies reveal that the mismatches in lattice and dangling bonds between 1D and 2D units govern the growth procedure. The resulting well-defined interface induces the delocalized interface states, thus facilitate the charge transfer and enhance the performance in the photoelectrochemical cells. We foresee that the mechanistic insights gained and the electronic structures revealed would inspire the design of more complex 1D/2D NHSs with outstanding functionalities. [ABSTRACT FROM AUTHOR]

Metal-organic frameworks (MOFs) have demonstrated great potentials in a variety of important applications. To enhance the inherent properties and endow materials with multifunctionality, the rational design and synthesis of MOFs with nanoscale porosity and hollow feature is highly desired and remains a great challenge. In this work, the formation of a series of well-defined MOF (MOF-5, FeII-MOF-5, FeIII-MOF-5) hollow nanocages by a facile solvothermal method, without any additional supporting template is reported. A surface-energy-driven mechanism may be responsible for the formation of hollow nanocages. The addition of pre-synthesized poly(vinylpyrrolidone)- (PVP) capped noble-metal nanoparticles into the synthetic system of MOF hollow nanocages yields the yolk-shell noble metal@MOF nanostructures. The present strategy to fabricate hollow and yolk-shell nanostructures is expected to open up exciting opportunities for developing a novel class of inorganic-organic hybrid functional nanomaterials. [ABSTRACT FROM AUTHOR]

Utilizing sustainable energy for chemical activation of small molecules, such as CO2, to produce important chemical feedstocks is highly desirable. The simultaneous production of CO/H2 mixture (syngas) from photoreduction of CO2 and H2O is highly promising. However, the relationships between structure, composition, crystallinity, and photocatalytic performance are still indistinct. Here, amorphous ultrathin CoO nanowires and polyoxometalate incorporated nanowires with even lower crystallinity were synthesized. The POM‐incorporated ultrathin nanowires exhibit high photocatalytic syngas production activity, reaching H2 and CO evolution rates of 11555 and 4165 μmol g−1 h−1 respectively. Further experiments indicate that the ultrathin morphology and incorporation of POM both contribute to the superior performance. Multiple characterizations reveal the enhanced charge–hole separation efficiency of the catalyst would facilitate the photocatalysis. [ABSTRACT FROM AUTHOR]