Search

Combining high‐voltage nickel‐rich cathodes with lithium metal anodes is among the most promising approaches for achieving high‐energy‐density lithium batteries. However, most current electrolytes fail to simultaneously satisfy the compatibility requirements for the lithium metal anode and the tolerance for the ultra‐high voltage NCM811 cathode. Here, we have designed an ultra‐oxidation‐resistant electrolyte by meticulously adjusting the composition of fluorinated carbonates. Our study reveals that a solid‐electrolyte interphase (SEI) rich in LiF and Li2O is constructed on the lithium anode through the synergistic decomposition of the fluorinated solvents and PF6− anion, facilitating smooth lithium metal deposition. The superior oxidation resistance of our electrolyte enables the Li||NCM811 cell to deliver a capacity retention of 80 % after 300 cycles at an ultrahigh cut–off voltage of 4.8 V. Additionally, a pioneering 4.8 V‐class lithium metal pouch cell with an energy density of 462.2 Wh kg−1 stably cycles for 110 cycles under harsh conditions of high cathode loading (30 mg cm−2), low N/P ratio (1.18), and lean electrolytes (2.3 g Ah−1). [ABSTRACT FROM AUTHOR]

Adsorption‐based removal of carbon dioxide (CO2) from gas mixtures has demonstrated great potential for solving energy security and environmental sustainability challenges. However, due to similar physicochemical properties between CO2 and other gases as well as the co‐adsorption behavior, the selectivity of CO2 is severely limited in currently reported CO2‐selective sorbents. To address the challenge, we create a bioinspired design strategy and report a robust, microporous metal–organic framework (MOF) with unprecedented [Mn86] nanocages. Attributed to the existence of unique enzyme‐like confined pockets, strong coordination interactions and dipole‐dipole interactions are generated for CO2 molecules, resulting in only CO2 molecules fitting in the pocket while other gas molecules are prohibited. Thus, this MOF can selectively remove CO2 from various gas mixtures and show record‐high selectivities of CO2/CH4 and CO2/N2 mixtures. Highly efficient CO2/C2H2, CO2/CH4, and CO2/N2 separations are achieved, as verified by experimental breakthrough tests. This work paves a new avenue for the fabrication of adsorbents with high CO2 selectivity and provides important guidance for designing highly effective adsorbents for gas separation. [ABSTRACT FROM AUTHOR]

Developing new materials for anhydrous proton conduction under high‐temperature conditions is significant and challenging. Herein, we create a series of highly crystalline covalent organic frameworks (COFs) via a pore engineering approach. We simultaneously engineer the pore geometry (generating concave dodecagonal nanopores) and pore surface (installing multiple functional groups such as −C=N−, −OH, −N=N− and −CF3) to improve the utilization efficiency and host–guest interaction of proton carriers, hence benefiting the enhancement of anhydrous proton conduction. Upon loading with H3PO4, COFs can realize a proton conductivity of 2.33×10−2 S cm−1 under anhydrous conditions, among the highest values of all COF materials. These materials demonstrate good stability and maintain high proton conductivity over a wide temperature range (80–160 °C). This work paves a new way for designing COFs for anhydrous proton conduction applications, which shows great potential as high‐temperature proton exchange membranes. [ABSTRACT FROM AUTHOR]

Regarding the global energy crisis, it is of profound significance to develop spontaneous power generators that harvest natural energy. Fabricating humidity‐responsive actuators that can conduct such energy transduction is of paramount importance. Herein, we incorporate covalent organic frameworks with flexible polyethylene glycol to fabricate rigid‐flexible coupled membrane actuators. This strategy significantly improves the mechanical properties and humidity‐responsive performance of the actuators, meanwhile, the existence of ordered structures enables us to unveil the actuation mechanism. These high‐performance actuators can achieve various actuation applications and exhibit interesting self‐oscillation behavior above a water surface. Finally, after being coupled with a piezoelectric film, the bilayer device can spontaneously output electricity over 2 days. This work paves a new avenue to fabricate rigid‐flexible coupled actuators for self‐sustained energy transduction. [ABSTRACT FROM AUTHOR]

It is of profound significance concerning the global energy and environmental crisis to develop new techniques that can reduce and convert CO2. To address this challenge, we built a new type of artificial photoenzymatic system for CO2 reduction, using a rationally designed mesoporous olefin‐linked covalent organic framework (COF) as the porous solid carrier for co‐immobilizing formate dehydrogenase (FDH) and Rh‐based electron mediator. By adjusting the incorporating content of the Rh electronic mediator, which facilitates the regeneration of nicotinamide cofactor (NADH) from NAD+, the apparent quantum yield can reach as high as 9.17±0.44 %, surpassing all reported NADH‐regenerated photocatalysts constructed by crystalline framework materials. Finally, the assembled photocatalyst–enzyme coupled system can selectively convert CO2 to formic acid with high efficiency and good reusability. This work demonstrates the first example using COFs to immobilize enzymes for artificial photosynthesis systems that utilize solar energy to produce value‐added chemicals. [ABSTRACT FROM AUTHOR]

Attributed to the unique topological complexity and elegant beauty, Borromean systems are attracting intense attention. However, at present, the construction of Borromean linked organic polymers remains a challenge. To address this formidable challenge, we developed a supramolecular‐synthon‐driven approach to fabricate Borromean linked organic polymer. The solvothermal condensation reaction of a judiciously selected trigonal pyramidal building block, 1,3,5‐Tris(4‐aminophenyl)adamantane, with linear dialdehyde building blocks allowed the construction of two rare covalent organic frameworks (COFs) with high crystallinity and robustness. Structure refinement unveiled the successful formation of entangled 2D→2D Borromean arrayed structures. Both the two COFs were of microporosity and thus demonstrated the potentials for gas separation. The successful synthesis of the first two Borromean linked organic polymers paves the avenue to expand the supramolecular‐synthon‐driven approach to other building blocks and topologies, and broadens the family and scope of COFs. [ABSTRACT FROM AUTHOR]

Organic polymers are usually amorphous or possess very low crystallinity. The metal complexes of organic polymeric ligands are also difficult to crystallize by traditional methods because of their poor solubilities and their 3D structures can not be determined by single-crystal X-ray crystallography owing to a lack of single crystals. Herein, we report the crystal structure of a 1D ZnII coordination polymer fused with an organic polymer ligand made in situ by a [2+2] cycloaddition reaction of a six-fold interpenetrated metal-organic framework. It is also shown that this organic polymer ligand can be depolymerized in a single-crystal-to-single-crystal (SCSC) fashion by heating. This strategy could potentially be extended to make a range of monocrystalline metal organopolymeric complexes and metal-organic organopolymeric hybrid materials. Such monocrystalline metal complexes of organic polymers have hitherto been inaccessible for materials researchers. [ABSTRACT FROM AUTHOR]

It is of profound significance concerning the global energy and environmental crisis to develop new techniques that can reduce and convert CO2. To address this challenge, we built a new type of artificial photoenzymatic system for CO2 reduction, using a rationally designed mesoporous olefin‐linked covalent organic framework (COF) as the porous solid carrier for co‐immobilizing formate dehydrogenase (FDH) and Rh‐based electron mediator. By adjusting the incorporating content of the Rh electronic mediator, which facilitates the regeneration of nicotinamide cofactor (NADH) from NAD+, the apparent quantum yield can reach as high as 9.17±0.44 %, surpassing all reported NADH‐regenerated photocatalysts constructed by crystalline framework materials. Finally, the assembled photocatalyst–enzyme coupled system can selectively convert CO2 to formic acid with high efficiency and good reusability. This work demonstrates the first example using COFs to immobilize enzymes for artificial photosynthesis systems that utilize solar energy to produce value‐added chemicals. [ABSTRACT FROM AUTHOR]