Search

Clusteroluminescence (CL) materials without largely conjugated structures have gained significant attention due to their unique photophysical properties and potential in bioimaging. However, low luminescence efficiency and short emission wavelength limit their development. This work designs three luminogens with CL properties (CLgens) by introducing n-electron-involved through-space conjugation (TSC) into diarylmethane. Apart from single-photon excited long-wavelength (686 nm) and high-efficiency (29 %) CL, two-photon clusteroluminescence (TPCL) is successfully achieved in such small luminogens with only two isolated heteroatomic units. TSC stabilized in the aggregate state has been proven to realize efficient spatial electron delocalization similar to conventionally conjugated compounds. Encouraged by the excellent TPCL properties, two-photon imaging of blood vessels in vivo and biocompatibility verification utilizing CLgens are also achieved. This work illustrates the essential role of TSC in promoting nonlinear optical properties of CLgens and may facilitate further design and development of the next generation of bioprobes with excellent biocompatibility., (© 2024 Wiley-VCH GmbH.)

Tuning full-color emission of polymers holds significant promise. However, preparing unconventional luminescence polymers with color-tunability in dilute solution and understanding the relationship between non-covalent interactions and luminescent behavior remains a great challenge. We report two emitters (P1 and P2) incorporating tetracoordinate boron. The P1 with non-conjugated D-π-A structure, exhibited red delayed fluorescence at 645 nm with quantum yield of 9.15 % in aggregates. Notably, the emission wavelength of P1 can be tuned from 418 to 588 nm at different solvent. Similarly, the emission wavelength of P2 can also be adjusted by manipulating the interactions between the solvent and fluorophore. Experimental characterization and theoretical calculations indicate that the B←N bond and electronic interactions between solvent and fluorophore significantly regulate the equilibrium the electrostatic potential (ESP) and the intramolecular O⋅⋅⋅O interactions of P1, thereby modulating its emission wavelength. Additionally, these polymers showed excellent potential in fluoride ions detection. This work provides new insights into the complex effects of intermolecular interactions on luminescent properties., (© 2024 Wiley-VCH GmbH.)

Polyamide plays a pivotal role in engineering thermoplastics. Constrained by the harsh conditions and arduous procedures for its industrial synthesis, developing facile synthesis of polyamides is still challengeable and holds profound significance. Herein, we successfully utilized water as one of the monomers to synthesize functional polyamides under ambient conditions. A powerful multicomponent polymerization of water, isocyanides, and chlorooximes was established in phosphate-buffered saline. Soluble and thermally stable polyamides with high weight-average molecular weights (up to 53 900) were obtained in excellent yields (up to 95 %). The polymerization exhibits unique polymerization-induced emission characteristics, successfully converting non-emissive monomers into unconventional emissive polymers. Notably, the resultant polyamides could undergo effective post-modification via the hydroxyl-yne click reaction. By incorporating various functional groups into the polyamide, its emission color could be fine-tuned from blue to green and to red. Remarkably, the refractive index (n) of the polyamide at 589 nm could be increased from 1.6173 to 1.7227 and the Δn could be unprecedentedly as high as 0.1054 for non-heavy atom-containing polymers after post-modification, and its micron-thick films exhibited excellent transparency in the visible region. Thus, this work not only establishes a powerful polymerization toward novel polyamides but also opens up an avenue for their versatile functionalization., (© 2024 Wiley-VCH GmbH.)

Schiff bases are a crucial component in various functional materials but often exhibit non-emissive behavior which significantly limits their potential applications as luminescent materials. However, traditional approaches to convert them into aggregate emitters often require intricate molecular design, tedious synthesis, and significant time and resource consumption. Herein, we present a cocrystallization-induced emission strategy that can transform non-emissive (hetero)aryl-substituted Schiff bases into green-yellow to yellow aggregate emitters via even simple grinding of a mixture of Schiff bases and 1,2,4,5-tetracyanobenzene (TCB) mixtures. The combined experimental and theoretical analysis revealed that the cocrystallization inhibits the C=N isomerization and promotes face-to-face π-π interaction, which restricts access to both the dark state and canonical intersection to ultimately induce emission. Furthermore, the induced emission enables the observation of solid-state molecular diffusion through fluorescence signals, advancing white light emission diodes, and notably, solution-processed organic light-emitting diodes based on cocrystal for the first time. This study not only highlights the potential of developing new C=N structural motifs for AIEgens but also could boost advancements in related structure motifs like C=C and N=N., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The length and mode of conjugation directly affect the molecular electronic structure, which has been extensively studied in through-bond conjugation (TBC) systems. Corresponding research greatly promotes the development of TBC-based luminophores. However, how the length and mode of through-space conjugation (TSC), one kind of weak interaction, influence the photophysical properties of non-conjugated luminophores remains a relatively unexplored field. Here, we unveil a non-linear relationship between TSC length and emission characteristics in non-conjugated systems, in contrast to the reported proportional correlation in TBC systems. More specifically, oligo(phenylene methylene)s (OPM[4]-OPM[7]) exhibit stronger TSC and prominent blue clusteroluminescence (CL) (≈440 nm) compared to shorter counterparts (OPM[2] and OPM[3]). OPM[6] demonstrates the highest solid-state quantum yield (40 %), emphasizing the importance of balancing flexibility and rigidity. Further theoretical calculations confirmed that CL of these oligo(phenylene methylene)s was determined by stable TSC derived from the inner rigid Diphenylmethane (DPM) segments within the oligomers instead of the outer ones. This discovery challenges previous assumptions and adds a new dimension to the understanding of TSC-based luminophores in non-conjugated systems., (© 2024 Wiley-VCH GmbH.)

X-ray imaging technology has achieved important applications in many fields and has attracted extensive attentions. Dynamic X-ray flexible imaging for the real-time observation of the internal structure of complex materials is the most challenging type of X-ray imaging technology, which requires high-performance X-ray scintillators with high X-ray excited luminescence (XEL) efficiency as well as excellent processibility and stability. Here, a macrocyclic bridging ligand with aggregation-induced emission (AIE) feature was introduced for constructing a copper iodide cluster-based metal-organic framework (MOF) scintillator. This strategy endows the scintillator with high XEL efficiency and excellent chemical stability. Moreover, a regular rod-like microcrystal was prepared through the addition of polyvinyl pyrrolidone during the in situ synthesis process, which further enhanced the XEL and processibility of the scintillator. The microcrystal was used for the preparation of a scintillator screen with excellent flexibility and stability, which can be used for high-performance X-ray imaging in extremely humid environments. Furthermore, dynamic X-ray flexible imaging was realized for the first time. The internal structure of flexible objects was observed in real time with an ultrahigh resolution of 20 LP mm -1 ., (© 2023 Wiley-VCH GmbH.)

Optimized theranostic strategies for Alzheimer's disease (AD) remain almost absent from bench to clinic. Current probes and drugs attempting to prevent β-amyloid (Aβ) fibrosis encounter failures due to the blood-brain barrier (BBB) penetration challenge and blind intervention time window. Herein, we design a near-infrared (NIR) aggregation-induced emission (AIE) probe, DNTPH, via balanced hydrophobicity-hydrophilicity strategy. DNTPH binds selectively to Aβ fibrils with a high signal-to-noise ratio. In vivo imaging revealed its excellent BBB permeability and long-term tracking ability with high-performance AD diagnosis. Remarkably, DNTPH exhibits a strong inhibitory effect on Aβ fibrosis and promotes fibril disassembly, thereby attenuating Aβ-induced neurotoxicity. DNTPH treatment significantly reduced Aβ plaques and rescued learning deficits in AD mice. Thus, DNTPH serves as the first AIE in vivo theranostic agent for real-time NIR imaging of Aβ plaques and AD therapy simultaneously., (© 2022 Wiley-VCH GmbH.)

Nonradiative decay invariably competes with radiative decay during the deexcitation process of matter. In the community of luminescence research, nonradiative decay has been deemed less attractive than radiative decay. However, all things in their being are good for something and so is nonradiative decay. As the molecular motion-facilitated nonradiative decay (MMFND) effect is inevitable in photophysical processes, it provides a new avenue to convert the harvested light energy into exploitable forms by harnessing molecular motion. In many cases, active molecular motion enables thermal deactivation from excited states. In this Minireview, recent advances in photothermal and photoacoustic systems with MMFND character are summarized. We believe that this presentation of the rational engineering of molecular motion for efficient photothermal generation will deepen the understanding of the relationship between molecular motion and nonradiative decay and navigate people to rethink the positive aspects of nonradiative decay for the establishment of new light-controllable techniques., (© 2022 Wiley-VCH GmbH.)