Search

Metal‐organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post‐synthetic strategies. However, several reported post‐synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation‐induced post‐synthesis, highlighting the merits of convenience, ambient conditions, large‐scale production, and notable time and energy saving. Specifically, a new HKUST‐1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST‐1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST‐1, without the use of any additional copper reagents. Significantly, the resulting HKUST‐1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST‐1. [ABSTRACT FROM AUTHOR]

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3−) through ion exchange or hard acid‐hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox‐active cationic polymer network (SCU‐CPN‐6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion‐exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU‐CPN‐6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3−. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU‐CPN‐6 shows excellent uptake selectivity for IO3− in the presence of high concentrations of SO42−, Cl−, and NO3−. Meanwhile, a high distribution coefficient indicates its exemplary deep‐removal performance for low IO3− concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3− but also establishes a promising avenue for the design of advanced adsorbents for diverse applications. [ABSTRACT FROM AUTHOR]

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X‐ray detection and imaging owing to its high quantum efficiency, short decay time, superior X‐ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X‐ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X‐ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X‐ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator. [ABSTRACT FROM AUTHOR]

Although examples of multiple bonds between actinide elements and main‐group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis‐[M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine‐bridged heterometallic complexes [{U{N(CH3)(CH2CH2NPiPr2)2}(Cl)2[(μ‐Cl)M(COD)]2}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M double dative bonds in these complexes. This study not only enriches the U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements. [ABSTRACT FROM AUTHOR]

Activation of dinitrogen (N2, 78 %) and dioxygen (O2, 21 %) has fascinated chemists and biochemists for decades. The industrial conversion of N2 into ammonia requires extremely high temperatures and pressures. Herein we report the first example of N2 and O2 cleavage by a uranium complex, [N(CH2CH2NPiPr2)3U]2(TMEDA), under ambient conditions without an external reducing agent. The N2 triple bond breaking implies a UIII–PIII six‐electron reduction. The hydrolysis of the N2 reduction product allows the formation of ammonia or nitrogen‐containing organic compounds. The interaction between UIII and PIII in this molecule allows an eight‐electron reduction of two O2 molecules. This study establishes that the combination of uranium and a low‐valent nonmetal is a promising strategy to achieve a full N2 and O2 cleavage under ambient conditions, which may aid the design of new systems for small molecules activation. [ABSTRACT FROM AUTHOR]

99Tc contamination at legacy nuclear sites is a serious and unsolved environmental issue. The selective remediation of 99TcO4− in the presence of a large excess of NO3− and SO42− from natural waste systems represents a significant scientific and technical challenge, since anions with a higher charge density are often preferentially sorbed by traditional anion‐exchange materials. We present a solution to this challenge based on a stable cationic metal‐organic framework, SCU‐102 (Ni2(tipm)3(NO3)4), which exhibits fast sorption kinetics, a large capacity (291 mg g−1), a high distribution coefficient, and, most importantly, a record‐high TcO4− uptake selectivity. This material can almost quantitatively remove TcO4− in the presence of a large excess of NO3− and SO42−. Decontamination experiments confirm that SCU‐102 represents the optimal Tc scavenger with the highest reported clean‐up efficiency, while first‐principle simulations reveal that the origin of the selectivity is the recognition of TcO4− by the hydrophobic pockets of the structure. Capturing radioactive species: A robust 3D cationic metal‐organic framework material, SCU‐102, exhibits fast sorption kinetics, large uptake capacity, high distribution coefficient, and a record‐high TcO4− uptake selectivity. The material offers a solution to the long‐term challenge of 99Tc decontamination from complex natural water systems at legacy nuclear sites. [ABSTRACT FROM AUTHOR]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]

Abstract: Actinide based metal–organic frameworks (MOFs) are unique not only because compared to the transition‐metal and lanthanide systems they are substantially less explored, but also owing to the uniqueness of actinide ions in bonding and coordination. Now a 3D thorium–organic framework (SCU‐11) contains a series of cages with an effective size of ca. 21×24 Å. Th4+ in SCU‐11 is 10‐coordinate with a bicapped square prism coordination geometry, which has never been documented for any metal cation complexes. The bicapped position is occupied by two coordinated water molecules that can be removed to afford a very unique open Th4+ site, confirmed by X‐ray diffraction, color change, thermogravimetry, and spectroscopy. The degassed phase (SCU‐11‐A) exhibits a Brunauer–Emmett–Teller surface area of 1272 m2 g−1, one of the highest values among reported actinide materials, enabling it to sufficiently retain water vapor, Kr, and Xe with uptake capacities of 234 cm3 g−1, 0.77 mmol g−1, 3.17 mmol g−1, respectively, and a Xe/Kr selectivity of 5.7. [ABSTRACT FROM AUTHOR]

Two‐electron oxidative addition is one of the most important elementary reactions for d‐block transition metals but it is uncommon for f‐block elements. Here, we report the first examples of intermolecular oxidative addition of E−H (E=C, N) bonds to uranium(II) centers. The transient U(II) species was formed in‐situ by reducing a heterometallic cluster featuring U(IV)‐Pd(0) bonds with potassium‐graphite (KC8). Oxidative addition of C−H or N−H bonds to the U(II) centers was observed when this transient U(II) species was treated with benzene, carbazole or 1‐adamantylamine, respectively. The U(II) centers could also react with tetracene, biphenylene or N2O, leading to the formation of arene reduced U(IV) products and uranyl(VI) species via two‐ or four‐electron processes. This study demonstrates that the intermolecular two‐electron oxidative addition reactions are viable for actinide elements. [ABSTRACT FROM AUTHOR]