Search

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

Semiconductive metal–organic frameworks (MOFs) have emerged in applications such as chemical sensors, electrocatalysts, energy storage materials, and electronic devices. However, examples of semiconductive MOFs within flexible electronics have not been reported. We present flexible X‐ray detectors prepared by thermoplastic dispersal of a semiconductive MOF (SCU‐13) through a commercially available polymer, poly(vinylidene fluoride). The flexible detectors exhibit efficient X‐ray‐to‐electric current conversion with enhanced charge‐carrier mobility and low trap density compared to pelleted devices. A high X‐ray detection sensitivity of 65.86 μCGyair−1 cm−2 was achieved, which outperforms other pelleted devices and commercial flexible X‐ray detectors. We demonstrate that the MOF‐based flexible detectors can be operated at multiple bending angles without a deterioration in detection performance. As a proof‐of‐concept, an X‐ray phase contrast under bending conditions was constructed using a 5×5 pixelated MOF‐based imager. [ABSTRACT FROM AUTHOR]

Flexible X-Ray Detector, Lanthanide Chalcogenide Scintillator, Luminescence, X-Ray Imaging Keywords: Flexible X-Ray Detector; Lanthanide Chalcogenide Scintillator; Luminescence; X-Ray Imaging EN Flexible X-Ray Detector Lanthanide Chalcogenide Scintillator Luminescence X-Ray Imaging 1 1 1 08/10/23 20230814 NES 230814 B Scintillators b . Frontispiece: Emergence of a Lanthanide Chalcogenide as an Ideal Scintillator for a Flexible X-ray Detector. [Extracted from the article]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]