Search

A strategy for transition metal‐free cross‐coupling of alkyl nitroso‐carbamates and boronic acids is reported. The N‐nitroso carbamates are easily prepared from the corresponding amine in two simple steps. This method allows for the synthesis of a wide variety of secondary boronates, benzylic boronates and formal Csp3−Csp2 cross‐coupling products under operationally simple conditions. Functional group tolerance is also demonstrated and applied in the modification of lysine to make non‐canonical amino acids. [ABSTRACT FROM AUTHOR]

This study pioneers a novel strategy for synthesizing solar‐blind ultraviolet (UV) nonlinear optical (NLO) crystals through functional groups sequential construction, effectively addressing the inherent trade‐offs among broad transmittance, enhanced second‐harmonic generation (SHG), and optimal birefringence. We have developed two innovative van der Waals layered germanous phosphites: GeHPO3, the first Ge(II)‐based oxide NLO crystal which exhibits a black phosphorus‐like structure, and K(GeHPO3)2Br, distinguished by its exceptional birefringence and graphene‐like structure. Significantly, GeHPO3 exhibits a remarkable array of NLO properties, including the highest SHG coefficient recorded among all NLO crystals for phase‐matching and generating 266 nm coherent light via quadruple frequency conversion. It delivers a potent SHG intensity, surpassing KH2PO4 (KDP) by 10.3 times at 1064 nm and β‐BaB2O4 by 1.3 times at 532 nm, complemented by a distinct UV absorption edge at 211 nm and moderate birefringence of 0.062 at 546 nm. Comprehensive theoretical analysis links these exceptional characteristics to the unique NLO‐active GeO34− units and the distinctive, highly ordered layered structures. Our findings deliver essential experimental insights into the development of Ge(II)‐based optoelectronic materials and present a strategic blueprint for engineering structure‐driven functional materials with customized properties. [ABSTRACT FROM AUTHOR]

Carbodicarbenes are strong C‐donor ligands, which have found numerous applications in organometallic and main group element chemistry. Herein, we report a structurally distinct carbodicarbene ligand, which is formed by dinitrogenative coupling of a Fischer carbene complex with an N‐heterocyclic diazoolefin. The resulting carbonyl complex serves as a stable source for the mixed Arduengo‐Fischer carbodicarbene ligand. Facile ligand transfer reactions were demonstrated to occur with gold(I), copper(I), palladium(II), and rhodium(I) complexes. [ABSTRACT FROM AUTHOR]

The construction of chiral motifs containing nonadjacent stereocenters in an enantio‐ and diastereoselective manner has long been a challenging task in synthetic chemistry, especially with respect to their stereodivergent synthesis. Herein, we describe a protocol that enables the enantio‐ and diastereoselective construction of 1,5/1,7‐nonadjacent tetrasubstituted stereocenters through a Pd/Cu‐cocatalyzed Heck cascade reaction. Notably, a C=C bond relay strategy involving the shift of the π‐allyl palladium intermediate was successfully applied in the asymmetric construction of 1,7‐nonadjacent stereocenters. The current method allows for the efficient preparation of chiral molecules bearing two privileged scaffolds, oxindoles and non‐natural α‐amino acids, with good functional group tolerance. The full complement of the four stereoisomers of products bearing 1,5/1,7‐nonadjacent stereocenters could be readily accessed by a simple combination of two chiral metal catalysts with different enantiomers. [ABSTRACT FROM AUTHOR]

Electrosynthesis of hydrogen peroxide (H2O2) based on proton exchange membrane (PEM) reactor represents a promising approach to industrial‐level H2O2 production, while it is hampered by the lack of high‐efficiency electrocatalysts in acidic medium. Herein, we present a strategy for the specific oxygen functional group (OFG) regulation to promote the H2O2 selectivity up to 92 % in acid on cobalt‐porphyrin molecular assembled with reduced graphene oxide. In situ X‐ray adsorption spectroscopy, in situ Raman spectroscopy and Kelvin probe force microscopy combined with theoretical calculation unravel that different OFGs exert distinctive regulation effects on the electronic structure of Co center through either remote (carboxyl and epoxy) or vicinal (hydroxyl) interaction manners, thus leading to the opposite influences on the promotion in 2e− ORR selectivity. As a consequence, the PEM electrolyzer integrated with the optimized catalyst can continuously and stably produce the high‐concentration of ca. 7 wt % pure H2O2 aqueous solution at 400 mA cm−2 over 200 h with a cell voltage as low as ca. 2.1 V, suggesting the application potential in industrial‐scale H2O2 electrosynthesis. [ABSTRACT FROM AUTHOR]

This study describes an unprecedented chromium‐catalyzed asymmetric Reformatsky reaction, enabling the synthesis of chiral β‐hydroxy carbonyl compounds from α‐chlorinated or α‐brominated esters and amides. By employing a chiral chromium/diarylamine bis(oxazoline) catalyst, we achieved relatively broad functional group tolerance. Distinct from known reports, the protocol operates under both classical and photoredox conditions, facilitated by the in situ formation of a nucleophilic chiral chromium intermediate through a radical‐polar crossover mechanism. Preliminary mechanistic insights, supported by DFT calculations, identify the nucleophilic aldehyde addition as the key stereo‐determining step. This approach not only overcomes the limitations of existing Reformatsky reactions but also provides a versatile strategy for accessing complex chiral molecules. [ABSTRACT FROM AUTHOR]

Silyl anions have garnered significant attention due to their synthetic abilities. However, previously reported silyl anions have been limited to either trigonal‐pyramidal or trigonal‐planar geometries, which confine them primarily as nucleophiles in substitution reactions. Herein, we report the isolation of the unprecedented T‐shaped planar silyl anion salt 2 by employment of a geometrically constrained triamido pincer ligand. Theoretical calculations disclosed that the silicon centre in 2 possesses both a lone pair of electrons and an empty 3pz orbital. In addition to nucleophilic substitution reactions with Ph3PAuCl and W(CO)6, 2 readily undergoes oxidative additions with CO2 and 2,6‐dimethylphenylisonitrile at room temperature. Furthermore, under mild conditions, compound 2 cleaves Csp2−H, Csp2−H, and H−H bonds in 1,2,4,5‐tetrafluorobenzene, an intramolecular iPr group, and dihydrogen, representing the first examples of C−H and H−H activations mediated by a silyl anion, respectively. This work unveils new reactivity of silyl anions owing to the non‐classical geometry and electronic structure. [ABSTRACT FROM AUTHOR]

Multi‐component copolymerized donors (MCDs) have gained significant interest and have been rapidly developed in flexible organic solar cells (f‐OSCs) in recent years. However, ensuring the power conversion efficiency (PCE) of f‐OSCs while retaining ideal mechanical properties remains an enormous challenge. The fracture strain (FS) value of typical high‐efficiency blend films is generally less than 8 %, which is far from the application standards of wearable photovoltaic devices. Therefore, we developed a series of novel MCDs after meticulous molecular design. Among them, the consistent MCD backbone and end‐capped functional group formed a highly conjugated molecular plane, and the solubilization and mechanical properties were effectively optimized by modifying the proportion of solubilized alkyl chains. Consequently, due to the formation of entangled structures with a frozen blend film morphology considerably improved the high ductility of the active layer, P10.8/P20.2‐TCl exhibited efficient PCE in rigid (18.53 %) and flexible (17.03 %) OSCs, along with excellent FS values (16.59 %) in pristine films, meanwhile, the outstanding FS values of 25.18 % and 12.3 % were achieved by P10.6/P20.4‐TCl ‐based pristine and blend films, respectively, which were one of the highest records achieved by end‐capped MCD‐based binary OSCs, demonstrating promising application to synchronize the realization of high‐efficiency and mechanically ductile flexible OSCs. [ABSTRACT FROM AUTHOR]

Amino acids (AAs) are modular building blocks which nature uses to synthesize both macromolecules, such as proteins, and small molecule natural products, such as alkaloids and non‐ribosomal peptides. While the 20 main proteinogenic AAs display relatively limited side chain diversity, a wide range of non‐canonical amino acids (ncAAs) exist that are not used by the ribosome for protein synthesis, but contain a broad array of structural features and functional groups. In this communication, we report the discovery of the biosynthetic pathway for a new ncAA, pazamine, which contains a cyclopropane ring formed in two steps. In the first step, a chlorine is added onto the C4 position of lysine by a radical halogenase, PazA. The cyclopropane ring is then formed in the next step by a pyridoxal‐5′‐phosphate‐dependent enzyme, PazB, via an SN2‐like attack at C4 to eliminate chloride. Genetic studies of this pathway in the native host, Pseudomonas azotoformans, show that pazamine potentially inhibits ethylene biosynthesis in growing plants based on alterations in the root phenotype of Arabidopsis thaliana seedlings. We further show that PazB can be utilized to make an alternative cyclobutane‐containing AA. These discoveries may lead to advances in biocatalytic production of specialty chemicals and agricultural biotechnology. [ABSTRACT FROM AUTHOR]

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL‐regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long‐lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N‐dimethyl‐1H‐imidazole‐1‐sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O‐induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de‐solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high‐performance zinc metal batteries. [ABSTRACT FROM AUTHOR]

The 1,3‐difunctionalization of unactivated alkenes is an under‐explored transformation that leads to moieties that are otherwise challenging to prepare. Herein, we report a hypervalent iodine‐mediated 1,3‐difluorination of homoallylic (aryl) ethers to give unreported 1,3‐difluoro‐4‐oxy groups with moderate to excellent diastereoselectivity. The transformation proceeds through a different mode of reactivity for 1,3‐difunctionalization, in which a regioselective addition of fluoride opens a transiently formed oxonium intermediate to rearrange an alkyl chain. The optimized protocol is scalable and shown to proceed well with a variety of functional groups and substitution on the alkenyl chain, hence providing ready access to this fluorinated, conformationally controlled moiety. [ABSTRACT FROM AUTHOR]

Morphological anisotropic engineering is powerful to synthesize metal–organic frameworks (MOFs) with versatile physicochemical properties for diverse applications ranging from gas storage/separation to electrocatalysis and batteries, etc. Herein, we developed a carbon substrate guided strategy to manipulate the facet‐dependent coordination for morphology engineering of Fe‐THBQ (tetrahydroxy‐1,4‐benzoquinone) frameworks, which is built with cubic Fe octamer bridged by two parallel THBQ ligands along three orthogonal axes, extending to a three‐dimensional (3D) framework with pcu‐e network topology. The electronegative O‐containing functional groups on carbon surfaces compete with THBQ linkers to selectively interact with the unsaturated coordinated Fe cations on the {111} facets and inhibit crystal growth along the <111> direction. The morphology of Fe‐THBQ evolves from thermodynamically favored truncated cube to cuboctahedron depending on the content of O‐containing functional groups on the carbon substrate. The Fe‐THBQ with varied morphologies exhibits facet‐dependent performances for electrochemical lithium storage. This work will shed light on the morphology modulation of MOFs for promising applications. [ABSTRACT FROM AUTHOR]

An efficient and broadly applicable rhodium‐catalyzed direct ortho‐arylation of anilines with aryl iodides relying on readily available aminophosphines as traceless directing groups is reported. Its scope and functional group compatibility were both found to be quite broad as a large variety of both aminophosphines and (hetero)aryl iodides, including complex ones, could be utilized. The ortho‐arylated anilines could be obtained in high average yields, without any competing diarylation and with full regioselectivity, which constitutes a major step forward compared to other processes. The reaction is moreover not limited to aryl iodides, as an aryl bromide and a triflate could be successfully used, and could be extended to diarylation. Mechanistic studies revealed the key and unique role of the aminophosphine, acting not only as a substrate but also as a ligand for the rhodium catalyst. [ABSTRACT FROM AUTHOR]

Cyclic sulfones have demonstrated important applications in drug discovery. However, the catalytic and enantioselective synthesis of chiral cyclic sulfones remains challenging. Herein, we develop nickel‐catalyzed regiodivergent and enantioselective hydroalkylation of sulfolenes to streamline the synthesis of chiral alkyl cyclic sulfones. The method has broad scope and high functional group tolerance. The regioselectivity can be controlled by ligands only. A neutral PYROX ligand favors C3‐alkylation whereas an anionic BOX ligand favors C2‐alkylation. This control is kinetic in origin as the C2‐bound Ni intermediates are always thermodynamically more stable. Reactivity study of a wide range of relevant Ni intermediates reveal a NiI/NiIII catalytic cycle with a NiII−H species as the resting state. The regio‐ and enantio‐determining step is the insertion of this NiII−H species into 2‐sulfolene. This work provides an efficient catalytic method for the synthesis of an important class of organic compounds and enhances the mechanistic understanding of Ni‐catalyzed stereoselective hydroalkylation. [ABSTRACT FROM AUTHOR]

Methods enabling the broad diversification of C(sp3)−H bonds from a common intermediate are especially valuable in chemical synthesis. Herein, we report a site‐selective (N‐phenyltetrazole)thiolation of aliphatic and (hetero)benzylic C(sp3)−H bonds using a commercially available disulfide to access N‐phenyltetrazole thioethers. The thioether products are readily elaborated in diverse fragment couplings for C−C, C−O, or C−N construction. The C−H functionalization proceeds via a radical‐chain pathway involving hydrogen atom transfer by the electron‐poor N‐phenyltetrazolethiyl radical. Hexafluoroisopropanol was found to be essential to reactions involving aliphatic C(sp3)−H thiolation, with computational analysis consistent with dual hydrogen bonding of the N‐phenyltetrazolethiyl radical imparting increased radical electrophilicity to facilitate the hydrogen atom transfer. Substrate is limiting reagent in all cases, and the reaction displays an exceptional functional group tolerance well suited to applications in late‐stage diversification. [ABSTRACT FROM AUTHOR]

The selective oxidation of benzylic C−H bonds is a pivotal transformation in organic synthesis. Undoubtedly, achieving efficient and highly selective aerobic oxidation of methylarenes to benzaldehydes has been highly challenging due to the propensity of benzaldehyde to undergo overoxidation under typical aerobic conditions. Herein, we propose an innovative approach to address this issue by leveraging electrocatalytic processes, facilitated by ion‐pair mediators [Ph3C]+[B(C6F5)4]−. By harnessing the power of electrochemistry, we successfully demonstrated the effectiveness of our strategy, which enables the selective oxidation of benzylic C−H bonds in benzylic molecules and toluene derivatives. Notably, our approach exhibited high efficiency, excellent selectivity, and compatibility with various functional groups, underscoring the broad applicability of our methodology. [ABSTRACT FROM AUTHOR]

The tert‐butyl group is a common aliphatic motif extensively employed to implement steric congestion and conformational rigidity in organic and organometallic molecules. Because of the combination of a high bond dissociation energy (~100 kcal mol−1) and limited accessibility, in the absence of directing groups, neither radical nor organometallic approaches are effective for the chemical modification of tert‐butyl C−H bonds. Herein we overcome these limits by employing a highly electrophilic manganese catalyst, [Mn(CF3bpeb)(OTf)2], that operates in the strong hydrogen bond donor solvent nonafluoro‐tert‐butyl alcohol (NFTBA) and catalytically activates hydrogen peroxide to generate a powerful manganese‐oxo species that effectively oxidizes tert‐butyl C−H bonds. Leveraging on the interplay of steric, electronic, medium and torsional effects, site‐selective and product chemoselective hydroxylation of the tert‐butyl group is accomplished with broad reaction scope, delivering primary alcohols as largely dominant products in preparative yields. Late‐stage hydroxylation at tert‐butyl sites is demonstrated on 6 densely functionalized molecules of pharmaceutical interest. This work uncovers a novel disconnection approach, harnessing tert‐butyl as a potential functional group in strategic synthetic planning for complex molecular architectures. [ABSTRACT FROM AUTHOR]

Controlling the end‐groups of biocompatible polymers is crucial for enabling polymer‐based therapeutics and nanomedicine. Typically, end‐group diversification is a challenging and time‐consuming endeavor, especially for polymers prepared via ionic polymerization mechanisms with limited functional group tolerance. In this study, we present a facile end‐group diversification approach for poly(2‐oxazoline)s (POx), enabling quick and reliable production of heterotelechelic polymers to facilitate POxylation. The approach relies on the careful tuning of reaction parameters to establish differential reactivity of a pentafluorobenzyl initiator fragment and the living oxazolinium chain‐end, allowing the selective introduction of N‐, S‐, O‐nucleophiles via the termination of the polymerization, and a consecutive nucleophilic para‐fluoro substitution. The value of this approach for the accelerated development of nanomedicine is demonstrated through the synthesis of well‐defined lipid‐polymer conjugates and POx‐polypeptide block‐copolymers, which are well‐suited for drug and gene delivery. Furthermore, we investigated the application of a lipid‐POx conjugate for the formulation and delivery of mRNA‐loaded lipid nanoparticles for immunization against the SARS‐COV‐2 virus, underscoring the value of POx as a biocompatible polymer platform. [ABSTRACT FROM AUTHOR]

Application of silicon‐based anodes is significantly challenged by low initial Coulombic efficiency (ICE) and poor cyclability. Traditional pre‐lithiation reagents often pose safety concerns due to their unstable chemical nature. Achieving a balance between water‐stability and high ICE in prelithiated silicon is a critical issue. Here, we present a lithium‐enriched silicon/graphite material with an ultra‐high ICE of ≥110 % through a high‐stable lithium pre‐storage methodology. Lithium pre‐storage prepared a nano‐drilled graphite material with surficial lithium functional groups, which can form chemical bonds with adjacent silicon during high‐temperature sintering. This results in an unexpected O−Li−Si interaction, leading to in situ pre‐lithiation of silicon nanoparticles and providing high stability in air and water. Additionally, the lithium‐enriched silicon/graphite materials impart a combination of high ICE, high specific capacity (620 mAh g−1), and long cycling stability (>400 cycles). This study opens up a promising avenue for highly air‐ and water‐stable silicon anode prelithiation methods. [ABSTRACT FROM AUTHOR]

MXenes have extensive applications due to their different properties determined by intrinsic structures and various functional groups. Exploring different functional groups of MXenes leads to improved performance or potential applications. In this work, we prepared new Ti3C2PBrx (x=0.4–0.6) MXene with phosphorus functional groups (−P) through a two‐step gas‐phase reaction. The acquisition of −P is achieved by replacing bromine functional groups (−Br) of Ti3C2Br2 in the phosphorus vapor. After −Br is replaced with −P, Ti3C2PBrx MXene shows an improved areal capacitance (360 mF cm−2) at 20 mV s−1 compared with Ti3C2Br2 MXene (102 mF cm−2). At a current density of 5 mA cm−2 after 10000 cycles, the capacitance retention of Ti3C2PBrx MXene has not decreased. The pseudocapacitive enhancement mechanism has been discovered based on the dual redox sites of the functional groups −P and Ti. [ABSTRACT FROM AUTHOR]

In contrast to the kinetically favored outward isomerization‐hydrocarbonylation of alkenes, the disfavored inward isomerization‐hydrocarbonylation of alkenes remains an important challenge. Herein, we have developed a novel and effective palladium‐catalyzed inward isomerization‐hydroaminocarbonylation of unactivated alkenes and aniline hydrochlorides for the formation of synthetically valuable α‐aryl carboxylic amides in high yields and high site‐selectivities. The high efficiency of the reaction is attributed to a relay catalysis strategy, in which the Markovnikov‐favored [PdH]‐PtBu3 catalyst is responsible for inward isomerization, while the [PdH]‐Ruphos catalyst is responsible for hydroaminocarbonylation of the resulting conjugated aryl alkenes. The reaction exhibits highly functional group tolerance and provides a new method for formal carbonylation of remote C(sp3)−H bond. [ABSTRACT FROM AUTHOR]

A highly efficient and chemoselective approach for the divergent assembling of unsymmetrical hydrazines through an unprecedented intermolecular desulfurdioxidative N−N coupling is developed. This metal free protocol employs readily accessible N‐arylhydroxylamines and N‐sulfinylanilines to provide highly valuable hydrazine products with good reaction yields and excellent functional group tolerance under simple conditions. Computational studies suggest that the in situ generated O‐sulfenylated arylhydroxylamine intermediate undergoes a retro‐[2π+2σ] cycloaddition via a stepwise diradical mechanism to form the N−N bond and release SO2. [ABSTRACT FROM AUTHOR]

Photoinduced Pd‐catalyzed bisfunctionalization of butadienes with a readily available organic halide and a nucleophile represents an emerging and attractive method to assemble versatile alkenes bearing various functional groups at the allylic position. However, enantiocontrol and/or diastereocontrol in the C−C or C−X bond‐formation step have not been solved due to the open‐shell process. Herein, we present a cascade asymmetric dearomatization reaction of indoles via photoexcited Pd‐catalyzed 1,2‐biscarbonfunctionalization of 1,3‐butadienes, wherein asymmetric control on both the nucleophile and electrophile part is achieved for the first time in photoinduced bisfunctionalization of butadienes. This method delivers structurally novel chiral spiroindolenines bearing two contiguous stereogenic centers with high diastereomeric ratios (up to >20 : 1 dr) and good to excellent enantiomeric ratios (up to 97 : 3 er). Experimental and computational studies of the mechanism have confirmed a radical pathway involving excited‐state palladium catalysis. The alignment and non‐covalent interactions between the substrate and the catalyst were found to be essential for stereocontrol. [ABSTRACT FROM AUTHOR]

β‐Tertiary amino acid derivatives constitute one of the most frequently occurring units in natural products and bioactive molecules. However, the efficient asymmetric synthesis of this motif still remains a significant challenge. Herein, we disclose a cobalt‐catalyzed enantioselective reductive addition reaction of ketimine using α‐chloro carbonyl compound as a radical precursor, providing expedient access to a diverse array of enantioenriched β‐quaternary amino acid analogues. This protocol exhibits outstanding enantioselectivity and broad substrate scope with excellent functional group tolerance. Preliminary mechanism studies rule out the possibility of Reformatsky‐type addition and confirm the involvement of radical species in stereoselective addition process. The synthetic utility has been demonstrated through the rapid assembly of iterative amino acid units and oligopeptide, showcasing its versatile platform for late‐stage modification of drug candidates. [ABSTRACT FROM AUTHOR]

Herein, we present catalyst‐regulated switchable site‐selective hydrosilylation of enynes, which are suitable for a wide range of alkyl and aryl substituted polar enynes and exhibit excellent functional group compatibility. Under the optimized conditions, silyl groups can be precisely installed at various positions of 1,3‐dienes. While α‐ and γ‐silylation products were obtained under platinum‐catalytic systems, β‐silylation products were delivered with [Cp*RuCl]4 as catalyst. This process lead to the formation of 1,3‐dienoates with diverse substitutions, which would pose challenges with other methodologies. [ABSTRACT FROM AUTHOR]

The one‐pot synthesis of λ4‐dibenzothiophen‐5‐imino‐N‐dibenzothiophenium triflate (1) in multigram scale is reported. This compound reacts with Rh2(esp)2 (esp=α,α,α′,α′‐tetramethyl‐1,3‐benzenedipropionic acid) generating a Rh‐coordinated sulfonitrene species, which is able to transfer the electrophilic nitrene moiety to olefins. When indenes are used as substrates, isoquinolines are obtained in good yields. We assumed that after formation of the corresponding N‐sulfonio aziridine, a ring expansion occurs via selective C−C bond cleavage and concomitant elimination of dibenzothiophene. Unexpectedly, a similar protocol transforms 1‐arylcyclobutenes into 1‐cyano‐1‐arylcyclopropanes. Our calculations indicate that aziridination is not favored in this case; instead, sulfilimine‐substituted cyclobutyl carbocations are initially formed, and these evolve to the isolated cyclopropanes via ring contraction. Both procedures are operationally simple, tolerate a range of functional groups, including oxidation‐sensitive alcohols and aldehydes, and enable the convenient preparation of valuable 15N‐labelled products. These results demonstrate the potential of 1 to provide alternative pathways for the selective transfer of N‐atoms in organic molecules. [ABSTRACT FROM AUTHOR]

Flavins and their alloxazine isomers are key chemical scaffolds for bioinspired electron transfer strategies. Their properties can be fine‐tuned by functional groups, which must be introduced at an early stage of the synthesis as their aromatic ring is inert towards post‐functionalization. We show that the introduction of a remote metal‐binding redox site on alloxazine and flavin activates their aromatic ring towards direct C−H functionalization. Mechanistic studies are consistent with a synthetic sequence involving ground‐state single electron transfer (SET) with an electrophilic source followed by radical‐radical coupling. This unprecedented reactivity opens new opportunities in molecular editing of flavins by direct aromatic post‐functionalization and the utility of the method is demonstrated with the site‐selective C6 functionalization of alloxazine and flavin with a CF3 group, Br or Cl, that can be further elaborated into OH and aryl for chemical diversification. [ABSTRACT FROM AUTHOR]

α‐Olefins are valued and abundant building blocks from fossil resources. They are widely used to provide small‐molecule or polymeric products. Despite numerous advantages of radical polymerization, it has been well‐documented as textbook knowledge that α‐olefins and their functionalized derivatives cannot be radically homopolymerized because of the degradative chain transfer side reactions. Herein, we report our studies on the homopolymerization of thiocyanate functionalized α‐olefins enabled by 1,4‐cyano group migration under radical conditions. By this approach, a library of ABC sequence‐controlled polymers with high molecular weights can be prepared. We can also extend this strategy to the homopolymerization of α‐substituted styrenic and acylate monomers which are known to be challenging to achieve. Overall, the demonstrated functional group migration radical polymerization could provide new possibilities to synthesize polymers with unprecedented main chain sequences and structures. These polymers are promising candidates for novel polymeric materials. [ABSTRACT FROM AUTHOR]

We disclose herein a novel photoredox and cobalt co‐catalyzed ring‐opening/acceptorless dehydrogenative functionalization of mono‐donor cyclopropanes. This sustainable and atom‐economic approach allows the rapid assembly of a wide range of allylic N,O‐acyl‐acetal derivatives. The starting materials are readily available and the reaction features mild conditions, broad substrate scope, and excellent functional group compatibility. The optimized conditions accommodate assorted cycloalkylamides and primary, secondary, and tertiary alcohols, with applications in late‐stage functionalization of pharmaceutically relevant compounds, stimulating further utility in medicinal chemistry. Moreover, selective nucleophilic substitutions with various carbon nucleophiles were achieved in a one‐pot fashion, offering a reliable avenue to access some cyclic and acyclic derivatives. [ABSTRACT FROM AUTHOR]

The development of site‐selective functionalization of N‐heteroarenes is highly desirable in streamlined synthesis. In this context, direct amination of pyridines stands as an important synthetic methodology, with particular emphasis on accessing 4‐aminopyridines, a versatile pharmacophore in medicinal chemistry. Herein, we report a reaction manifold for the C4‐selective amination of pyridines by employing nucleophilic substitution of hydrogen (SNH). Through 4‐pyridyl pyridinium salt intermediates, 4‐aminopyridine products are obtained in reaction with aqueous ammonia without intermediate isolation. The notable regioselectivity was achieved by the electronic tuning of the external pyridine reagents along with the maximization of polarizability in the proton elimination stage. Further mechanistic investigations provided a guiding principle for the selective C−H pyridination of additional N‐heteroarenes, presenting a strategic avenue for installation of diverse functional groups. [ABSTRACT FROM AUTHOR]

Biological proton channels have perfect selectivity in aqueous environment against almost all ions and molecules, a property that differs itself from other biological channels and a feature that remains challenging to realize for bulk artificial materials. The biological perfect selectivity originates from the fact that the channel has almost no free space for ion or water transport but generates a hydrogen bonded wire in the presence of protons to allow the proton hopping. Inspired by this, we used the interlayer spacings of covalent organic framework materials consisting of hydrophilic functional groups as perfectly selective artificial proton channels. The interlayer spacings are so narrow that no atoms or molecules can diffuse through. However, protons exhibit a diffusivity in the same order of magnitude as that in bulk water. Density functional theory calculations show that water molecules and the COF material form hydrogen bonded wires, allowing the proton hopping. We further demonstrate that the proton transport rate can be tuned by adjusting the acidity of the functional groups. [ABSTRACT FROM AUTHOR]

The present study reports an unprecedented protocol for the phosphonylation of unactivated C(sp3)−H bonds. By utilizing 1 mol % 4DPAIPN (1,2,3,5‐tetrakis(diphenylamino)‐4,6‐dicyanobenzene) as the catalyst, satisfactory yields of γ‐phosphonylated amides are obtained through a visible‐light‐induced reaction between N‐((4‐cyanobenzoyl)oxy)alkanamides and 9‐fluorenyl o‐phenylene phosphite at room temperature. This protocol demonstrates broad substrate scope and wide functional group compatibility. [ABSTRACT FROM AUTHOR]

The stereodefined and highly substituted vinylsilanes are essential building blocks for constructing complex organic molecules. Transition metal‐mediated silylmetalation of alkynes was developed to overcome the limitations of conventional hydrosilylations; however, a very limited study was carried out to utilize transient vinylmetal species in cross‐coupling reactions. Moreover, they produce syn‐adduct, and the anti‐selective cross‐coupling is still unknown and highly desired. Silylzinc reagents are highly functional group tolerant, however, their synthesis from pyrophoric silyllithium and dissolved lithium salts hampers cross‐coupling reactions. Our novel solid silylzinc reagents circumvent these constraints are employed in the anti‐selective synthesis of vinylsilanes via a multi‐component reaction involving Me3SiZnI, terminal alkynes, and activated alkyl halides. An intensive computational and experimental investigation of the mechanism reveals an equilibrium between the intermediate syn‐ and anti‐adducts; the greater barrier at the single electron reduction of alkyl halides and the thermodynamic stability of the Ni(III) adduct determine the anti‐selectivity. [ABSTRACT FROM AUTHOR]

The homoleptic magnesium bis(aluminyl) compound Mg[Al(NON)]2 (NON=4,5‐bis(2,6‐diisopropylanilido)‐2,7‐di‐tert‐butyl‐9,9‐dimethylxanthene) can be accessed from K2[Al(NON)]2 and MgI2 and shown to possess a non‐linear geometry (∠Al−Mg−Al=164.8(1)°) primarily due to the influence of dispersion interactions. This compound acts a four‐electron reservoir in the reductive de‐fluorination of SF6, and reacts thermally with polar substrates such as MeI via nucleophilic attack through aluminium, consistent with the QT‐AIM charges calculated for the metal centres, and a formal description as a Al(I)−Mg(II)−Al(I) trimetallic. On the other hand, under photolytic activation, the reaction with 1,5‐cyclooctadiene leads to the stereo‐selective generation of transannular cycloaddition products consistent with radical based chemistry, emphasizing the covalent nature of the Mg−Al bonds and a description as a Al(II)−Mg(0)−Al(II) synthon. Consistently, photolysis of Mg[Al(NON)]2 in hexane in the absence of COD generates [Al(NON)]2 together with magnesium metal. [ABSTRACT FROM AUTHOR]

The use of gem‐difluorinated cyclopropanes (gem‐DFCPs) as fluoroallyl surrogates under transition‐metal catalysis has drawn considerable attention recently but such reactions are restricted to producing achiral or racemic mono‐fluoroalkenes. Herein, we report the first enantioselective allylation of indoles under rhodium catalysis with gem‐DFCPs. This reaction shows exceptional branched regioselectivity towards rhodium catalysis with gem‐DFCPs, which provides an efficient route to enantioenriched fluoroallylated indoles with wide substrate scope and good functional group tolerance. [ABSTRACT FROM AUTHOR]

Upgrading CO2 to value‐added chiral molecules via catalytic asymmetric C−C bond formation is a highly important yet challenging task. Although great progress on the formation of centrally chiral carboxylic acids has been achieved, catalytic construction of axially chiral carboxylic acids with CO2 has never been reported to date. Herein, we report the first catalytic asymmetric synthesis of axially chiral carboxylic acids with CO2, which is enabled by nickel‐catalyzed dynamic kinetic asymmetric reductive carboxylation of racemic aza‐biaryl triflates. A variety of important axially chiral carboxylic acids, which are valuable but difficult to obtain via catalysis, are generated in an enantioconvergent version. This new methodology features good functional group tolerance, easy to scale‐up, facile transformation and avoids cumbersome steps, handling organometallic reagents and using stoichiometric chiral materials. Mechanistic investigations indicate a dynamic kinetic asymmetric transformation process induced by chiral nickel catalysis. [ABSTRACT FROM AUTHOR]

Upgrading CO2 to value‐added chiral molecules via catalytic asymmetric C−C bond formation is a highly important yet challenging task. Although great progress on the formation of centrally chiral carboxylic acids has been achieved, catalytic construction of axially chiral carboxylic acids with CO2 has never been reported to date. Herein, we report the first catalytic asymmetric synthesis of axially chiral carboxylic acids with CO2, which is enabled by nickel‐catalyzed dynamic kinetic asymmetric reductive carboxylation of racemic aza‐biaryl triflates. A variety of important axially chiral carboxylic acids, which are valuable but difficult to obtain via catalysis, are generated in an enantioconvergent version. This new methodology features good functional group tolerance, easy to scale‐up, facile transformation and avoids cumbersome steps, handling organometallic reagents and using stoichiometric chiral materials. Mechanistic investigations indicate a dynamic kinetic asymmetric transformation process induced by chiral nickel catalysis. [ABSTRACT FROM AUTHOR]

Despite the remarkable progress of perovskite solar cells (PSCs), challenges remain in terms of finding effective and viable strategies to enhance their long‐term stability while maintaining high efficiency. In this study, a new insulating and hydrophobic fluorinated polyimide (FPI: 6FDA‐6FAPB) was used as the interface layer between the perovskite layer and the hole transport layer (HTL) in PSCs. The functional groups of FPI play a pivotal role in passivating interface defects within the device. Due to its high work function, FPI demonstrates field‐effect passivation (FEP) capabilities as an interface layer, effectively mitigating non‐radiative recombination at the interface. Notably, the FPI insulating interface layer does not impede carrier transmission at the interface, which is attributed to the presence of hole tunneling effects. The optimized PSCs achieve an outstanding power conversion efficiency (PCE) of 24.61 % and demonstrate excellent stability, showcasing the efficacy of FPI in enhancing device performance and reliability. [ABSTRACT FROM AUTHOR]

The use of molecular photoswitches has spread to virtually every field of pure and applied chemistry because of the extraordinary level of control they provide over the behavior of matter at the smallest scales. Photoswitches possess at least two different states with distinct structures and/or electronics and further functionalization of their core chromophore structures is needed to tailor them for a specific application. In this work we present a different concept for the generation and use of molecular photoswitches. It allows not only simultaneous establishment of photochromism and functionalization, but also full recyclability of a non‐photochromic precursor material. Using a high‐yielding and reversible ammonium salt formation, a functional group is introduced into a symmetric precursor while at the same time a strong electronic push‐pull character is established in the structure. The resulting desymmetrization leads to efficient photoswitching capacity and the functional group can be fully removed subsequently by a simple heating step recovering the precursor for another functionalization round. We finally demonstrate feasibility of this concept over two consecutive closed loop functionalization/photoswitching/recovery steps. This concept offers great potential in any chemical research and application driven area but especially for the creation of responsive reprogrammable materials, no‐background photoswitch labeling, and sustainable chemistry. [ABSTRACT FROM AUTHOR]

Postsynthetic modifications (PSMs) of metal–organic frameworks (MOFs) play a crucial role in enhancing material performance through open metal site (OMS) functionalization or ligand exchange. However, a significant challenge persists in preserving open metal sites during ligand exchange, as these sites are inherently bound by incoming ligands. In this study, for the first time, we introduced alkoxides by exchanging bridging chloride in Ni2Cl2BTDD (BTDD=bis (1H‐1,2,3,–triazolo [4,5‐b],–[4′,5′‐i]) dibenzo[1,4]dioxin) through PSM. Rietveld refinement of synchrotron X‐ray diffraction data indicated that the alkoxide oxygen atom bridges Ni(II) centers while the OMSs of the MOF are preserved. Due to the synergy of the existing OMS and introduced functional group, the alkoxide‐exchanged MOFs showed CO2 uptakes superior to the pristine MOF. Remarkably, the tert‐butoxide‐substituted Ni_T exhibited a nearly threefold and twofold increase in CO2 uptake compared to Ni2Cl2BTDD at 0.15 and 1 bar, respectively, as well as high water stability relative to the other exchanged frameworks. Furthermore, the Grand Canonical Monte Carlo simulations for Ni_T suggested that CO2 interacts with the OMS and the surrounding methyl groups of tert‐butoxide groups, which is responsible for the enhanced CO2 capacity. This work provides a facile and unique synthetic strategy for realizing a desirable OMS‐incorporating MOF platform through bridging ligand exchange. [ABSTRACT FROM AUTHOR]

The construction of silicon‐stereogenic silanols via Pd‐catalyzed intermolecular C−H alkenylation with the assistance of a commercially available L‐pyroglutamic acid has been realized for the first time. Employing oxime ether as the directing group, silicon‐stereogenic silanol derivatives could be readily prepared with excellent enantioselectivities, featuring a broad substrate scope and good functional group tolerance. Moreover, parallel kinetic resolution with unsymmetric substrates further highlighted the generality of this protocol. Mechanistic studies indicate that L‐pyroglutamic acid could stabilize the Pd catalyst and provide excellent chiral induction. Preliminary computational studies unveil the origin of the enantioselectivity in the C−H bond activation step. [ABSTRACT FROM AUTHOR]

Glycans on tumor cell surface have significant impacts in the immune‐killing process. Here an ultra‐galactocation to sialic acid (Sia) strategy is designed to hugely introduce galactose (Gal) to Sia and on tumor cells in vivo by using a penta‐functional dendritic probe (Den@5F), which efficiently enhances the immune‐killing of tumor cells. The Den@5F contains five different kinds of functional groups, including Gal, Cy5, amino, phenylboronic acid (PBA) and 4‐(4‐(hydroxymethyl)‐2‐methoxy‐5‐nitrophenoxy) butanoate (mNB), which can be conveniently prepared through a two‐step reaction. After injecting into the tumor‐bearing mouse, Den@5F can efficiently block Sia through the specific recognition between PBA and Sia on tumor cells and hugely introduce Gal through the subsequent photo‐crosslinking between mNB and amino groups to multiply conjugate excessive Den@5Fs. The comprehensively blocked Sia can prevent the immune escape, and the hugely introduced Gal can promote the immune stimulation of the immune cells, which lead to an efficient enhancement of the immune‐killing. The proposed strategy provides a significant and promising tool to promote the clinical immunotherapy of tumor. [ABSTRACT FROM AUTHOR]

We report on the synthesis and characterization of a series of (mostly) air‐stable diorganyl bis(pyridylimino) isoindolide (BPI) aluminum complexes and their chemistry upon visible‐light excitation. The redox non‐innocent BPI pincer ligand allows for efficient charge transfer homolytic processes of the title compounds. This makes them a universal platform for the generation of carbon‐centered radicals. The photo‐induced homolytic cleavage of the Al−C bonds was investigated by means of stationary and transient UV/Vis spectroscopy, spin trapping experiments, as well as EPR and NMR spectroscopy. The experimental findings were supported by quantum chemical calculations. Reactivity studies enabled the utilization of the aluminum complexes as reactants in tin‐free Giese‐type reactions and carbonyl alkylations under ambient conditions, which both indicated radical‐polar crossover behavior. A deeper understanding of the physical fundamentals and photochemical process was provided, furnishing in turn a new strategy to control the reactivity of bench‐stable aluminum organometallics. [ABSTRACT FROM AUTHOR]

Functionalized primary alkyl chlorides are precursors to a plethora of scaffolds but their access from chemical feedstocks remains challenging. Herein, we report a concise dual Ni/photoredox catalytic protocol for regioselective chlorocarbonylation of unactivated alkenes that enables rapid access to β‐keto primary chlorides. The catalytic process features an extensive substrate scope, scalability and functional group tolerance. The Ni/photocatalytic Cl⋅ generation and subsequent cross‐coupling is implicated for the process based on the control experiments and DFT study. The synthetic utility of the protocol has been further corroborated through functionalization of complex substrates and modifications of the product. [ABSTRACT FROM AUTHOR]

Unnatural amino acids, and their synthesis by the late‐stage functionalization (LSF) of peptides, play a crucial role in areas such as drug design and discovery. Historically, the LSF of biomolecules has predominantly utilized traditional synthetic methodologies that exploit nucleophilic residues, such as cysteine, lysine or tyrosine. Herein, we present a photocatalytic hydroarylation process targeting the electrophilic residue dehydroalanine (Dha). This residue possesses an α,β‐unsaturated moiety and can be combined with various arylthianthrenium salts, both in batch and flow reactors. Notably, the flow setup proved instrumental for efficient scale‐up, paving the way for the synthesis of unnatural amino acids and peptides in substantial quantities. Our photocatalytic approach, being inherently mild, permits the diversification of peptides even when they contain sensitive functional groups. The readily available arylthianthrenium salts facilitate the seamless integration of Dha‐containing peptides with a wide range of arenes, drug blueprints, and natural products, culminating in the creation of unconventional phenylalanine derivatives. The synergistic effect of the high functional group tolerance and the modular characteristic of the aryl electrophile enables efficient peptide conjugation and ligation in both batch and flow conditions. [ABSTRACT FROM AUTHOR]

We disclose the development of a Cu‐catalyzed C−O coupling method utilizing a new N1,N2‐diarylbenzene‐1,2‐diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8‐based catalyst. Notably, the L8‐derived catalyst exhibited enhanced activity when compared to the L4‐based system previously disclosed for C−N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C−O coupling utilizing L8 ⋅ Cu involves rate‐limiting alkoxide transmetallation, resulting in a mechanism of C−O bond formation that is distinct from previously described Pd‐, Cu‐, or Ni‐based systems. This lower energy pathway leads to rapid C−O bond formation; a 7‐fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C−O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu‐catalyzed C‐heteroatom bond‐forming reactions. [ABSTRACT FROM AUTHOR]

The nature of protecting group chemistry necessitates a deprotection step to restore the initially blocked functionality prior to further transformation. As this aspect of protecting group manipulation inevitably adds to the step count of any synthetic sequence, the development of methods enabling simultaneous deprotection and functionalization ("deprotective functionalization"—distinct from "deprotection followed by functionalization") is appealing, as it has the potential to improve efficiency and streamline synthetic routes. Herein, we report a deprotective functionalization of the newly introduced Nms‐amides guided by density functional theory (DFT) analysis, which exploits the inherent Nms reactivity. Mechanistic studies further substantiate and help rationalize the exquisite reactivity of Nms‐amides, as other commonly used protecting groups are shown not to exhibit the same reactivity patterns. The practicality of this approach was ultimately demonstrated in selected case studies. [ABSTRACT FROM AUTHOR]

The rapid assembly of valuable cyclic amine architectures in a single step from simple precursors has been recognized as an ideal platform in term of efficiency and sustainability. Although a vast number of studies regarding cyclic amine synthesis has been reported, new synthetic disconnection approaches are still high in demand. Herein, we report a catalytic radical‐polar crossover cycloaddition to cyclic amine synthesis triggered from primary sulfonamide under photoredox condition. This newly developed disconnection, comparable to established synthetic approaches, will allow to construct β, β‐disubstituted cyclic amine and β‐monosubstituted cyclic amine derivatives efficiently. This study highlights the unique utility of primary sulfonamide as a bifunctional reagent, which acts as a radical precursor and a nucleophile. The open‐shell methodology demonstrates broad tolerance to various functional groups, drug derivatives and natural products in an economically and sustainable fashion. [ABSTRACT FROM AUTHOR]

Geminal bis(boronates) are versatile synthetic building blocks in organic chemistry. The fact that they predominantly serve as nucleophiles in the previous reports, however, has restrained their synthetic potential. Herein we disclose the ambiphilic reactivity of α‐halogenated geminal bis(boronates), of which the first catalytic utilization was accomplished by merging a formal Heck cross‐coupling with a highly diastereoselective allylboration of aldehydes or imines, providing a new avenue for rapid assembly of polyfunctionalized boron‐containing compounds. We demonstrated that this cascade reaction is highly efficient and compatible with various functional groups, and a wide range of heterocycles. In contrast to a classical Pd(0/II) scenario, mechanistic experiments and DFT calculations have provided strong evidence for a catalytic cycle involving Pd(I)/diboryl carbon radical intermediates. [ABSTRACT FROM AUTHOR]

A general approach to the direct deoxygenative transformation of primary, secondary, and tertiary alcohols has been developed. It undergoes through phosphoranyl radical intermediates generated by the addition of exogenous iodine radical to trivalent alkoxylphosphanes. Since these alkoxylphosphanes are readily in situ obtained from alcohols and commercially available, inexpensive chlorodiphenylphosphine, a diverse range of alcohols with various functional groups can be utilized to proceed deoxygenative cross‐couplings with alkenes or aryl iodides. The selective transformation of polyhydroxy substrates and the rapid synthesis of complex organic molecules are also demonstrated with this method. [ABSTRACT FROM AUTHOR]