Search

A copper porphyrin‐derived metal–organic framework electrocatalyst, FICN‐8, was synthesized and its catalytic activity for CO2 reduction reaction (CO2RR) was investigated. FICN‐8 selectively catalyzed electrochemical reduction of CO2 to CO in anhydrous acetonitrile electrolyte. However, formic acid became the dominant CO2RR product with the addition of a proton source to the system. Mechanistic studies revealed the change of major reduction pathway upon proton source addition, while catalyst‐bound hydride (*H) species was proposed as the key intermediate for formic acid production. This work highlights the importance of electrolyte composition on CO2RR product selectivity. [ABSTRACT FROM AUTHOR]

Covalent heptazine frameworks (CHFs) are widely utilized in the recent years as potential photocatalysts. However, their limited conjugated structures, low crystallinity and small surface areas have restricted the practical photocatalysis performance. Along this line, we report herein the synthesis of a kind of mixed crystalline CHF (m‐CHF‐1) with built‐in heterojunction structure, which can efficiently catalyze the formic acid dehydrogenation by visible light driven photocatalysis. The m‐CHF‐1 is synthesized from 2,5,8‐triamino‐heptazine and dicyanobenzene (DCB) in the molten salts, in which DCB plays as organic molten co‐solvent to promote the rapid and ordered polymerization of 2,5,8‐triamino‐heptazine. The m‐CHF‐1 is formed by embedding phenyl‐linked heptazine (CHF−Ph) units in the poly(heptazine imide) (PHI) network similar to doping. The CHF−Ph combined with PHI form an effective type II heterojunction structure, which promote the directional transfer of charge carriers. And the integration of CHF−Ph makes m‐CHF‐1 have smaller exciton binding energy than pure PHI, the charge carriers are more easily dissociated to form free electrons, resulting in higher utilization efficiency of the carriers. The largest hydrogen evolution rate reaches a value of 42.86 mmol h−1 g−1 with a high apparent quantum yield of 24.6 % at 420 nm, which surpasses the majority of other organic photocatalysts. [ABSTRACT FROM AUTHOR]

The wrinkles are pervasive in ultrathin two‐dimensional (2D) materials, but the regulation of wrinkles is rarely explored systematically. Here, we employed a series of carboxylic acids (from formic acid to octanoic acid) to control the wrinkles of Zr‐BTB (BTB=1, 3, 5‐(4‐carboxylphenyl)‐benzene) metal–organic framework (MOF) nanosheet. The wrinkles at the micrometer scale were observed with transmission electron microscopy. Furthermore, high‐angle annular dark‐field (HAADF) images showed lattice distortion in many nanoscale regions, which was precisely matched to the nano‐wrinkles. With the changes of hydrophilicity/hydrophobicity, MOF‐MOF and MOF‐solvent interactions were possibly synergistically regulated and wrinkles with different sizes were obtained, which was supported by HAADF, molecular dynamics, and density functional theory calculation. Different wrinkle sizes resulted in different pore sizes between the Zr‐BTB nanosheet interlayers, providing highly‐oriented thin films and the successive optimization of kinetic diffusion pathways, proved by grazing‐incidence wide‐angle X‐ray scattering and nitrogen adsorption. The most suitable wrinkle pore from Zr‐BTB‐C4 exhibited highly efficient chromatographic separation of the substituted benzene isomers. Our work provides a rational route for the modulation of nanoscale wrinkles and their stacked pores of MOF nanosheets and improves the separation abilities of MOFs. [ABSTRACT FROM AUTHOR]

Hydrogen spillover in metal‐supported catalysts can largely enhance electrocatalytic hydrogenation performance and reduce energy consumption. However, its fundamental mechanism, especially at the metal–metal interface, remains further explored, impeding relevant catalyst design. Here, we theoretically profile that a large free energy difference in hydrogen adsorption on two different metals (|ΔGH‐metal(i)−ΔGH‐metal(ii)|) induces a high kinetic barrier to hydrogen spillover between the metals. Minimizing the difference in their d‐band centers (Δϵd) should reduce |ΔGH‐metal(i)−ΔGH‐metal(ii)|, lowering the kinetic barrier to hydrogen spillover for improved electrocatalytic hydrogenation. We demonstrated this concept using copper‐supported ruthenium–platinum alloys with the smallest Δϵd, which delivered record high electrocatalytic nitrate hydrogenation performance, with ammonia production rate of 3.45±0.12 mmol h−1 cm−2 and Faraday efficiency of 99.8±0.2 %, at low energy consumption of 21.4 kWh kgamm−1. Using these catalysts, we further achieve continuous ammonia and formic acid production with a record high‐profit space. [ABSTRACT FROM AUTHOR]

Electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO−) is a promising strategy for carbon neutrality. Enhancing CO2RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal‐doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high‐purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal‐doped Bi catalysts, Co‐doped Bi demonstrated improved CO2RR performance compared to pristine Bi, achieving ~90 % HCOO− selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm−2. In a solid electrolyte reactor, Co‐doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100‐hour operation under a current density of 100 mA cm−2, generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co‐doped Bi required a lower applied potential for HCOOH generation from CO2, due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. This study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO2RR catalytic activity performance by tuning surface adsorption affinity and reactivity. [ABSTRACT FROM AUTHOR]

The practical application of the electrocatalytic CO2 reduction reaction (CO2RR) to form formic acid fuel is hindered by the limited activation of CO2 molecules and the lack of universal feasibility across different pH levels. Herein, we report a doping‐engineered bismuth sulfide pre‐catalyst (BiS‐1) that S is partially retained after electrochemical reconstruction into metallic Bi for CO2RR to formate/formic acid with ultrahigh performance across a wide pH range. The best BiS‐1 maintains a Faraday efficiency (FE) of ~95 % at 2000 mA cm−2 in a flow cell under neutral and alkaline solutions. Furthermore, the BiS‐1 catalyst shows unprecedentedly high FE (~95 %) with current densities from 100 to 1300 mA cm−2 under acidic solutions. Notably, the current density can reach 700 mA cm−2 while maintaining a FE of above 90 % in a membrane electrode assembly electrolyzer and operate stably for 150 h at 200 mA cm−2. In situ spectra and density functional theory calculations reveals that the S doping modulates the electronic structure of Bi and effectively promotes the formation of the HCOO* intermediate for formate/formic acid generation. This work develops the efficient and stable electrocatalysts for sustainable formate/formic acid production. [ABSTRACT FROM AUTHOR]

The preparation of formic acid by direct reduction of carbon dioxide is an important basis for the future chemical industry and is of great significance. Due to the serious shortage of highly active and selective electrocatalysts leading to the development of direct reduction of carbon dioxide is limited. Herein the target catalysts with high CO2RR activity and selectivity were identified by integrating DFT calculations and high‐throughput screening and by using graphdiyne (GDY) supported metal oxides quantum dots (QDs) as the ideal model. It is theoretically predicted that GDY supported indium oxide QDs (i.e. InOx/GDY) is a new heterostructure electrocatalyst candidate with optimal CO2RR performance. The interfacial electronic strong interactions effectively regulate the surface charge distribution of QDs and affect the adsorption/desorption behavior of HCOO* intermediate during CO2RR to achieve highly efficient CO2 conversion. Based on the predicted composition and structure, we synthesized the advanced catalytic system, and demonstrates superior CO2‐to‐HCOOH conversion performance. The study presents an effective strategy for rational design of highly efficient heterostructure electrocatalysts to promote green chemical production. [ABSTRACT FROM AUTHOR]

The poisoning of undesired intermediates or impurities greatly hinders the catalytic performances of noble metal‐based catalysts. Herein, high‐entropy intermetallics i‐(PtPdIrRu)2FeCu (HEI) are constructed to inhibit the strongly adsorbed carbon monoxide intermediates (CO*) during the formic acid oxidation reaction. As probed by multiple‐scaled structural characterizations, HEI nanoparticles are featured with partially negative Pt oxidation states, diluted Pt/Pd/Ir/Ru atomic sites and ultrasmall average size less than 2 nm. Benefiting from the optimized structures, HEI nanoparticles deliver more than 10 times promotion in intrinsic activity than that of pure Pt, and well‐enhanced mass activity/durability than that of ternary i‐Pt2FeCu intermetallics counterpart. In situ infrared spectroscopy manifests that both bridge and top CO* are favored on pure Pt but limited on HEI. Further theoretical elaboration indicates that HEI displayed a much weaker binding of CO* on Pt sites and sluggish diffusion of CO* among different sites, in contrast to pure Pt that CO* bound more strongly and was easy to diffuse on larger Pt atomic ensembles. This work verifies that HEIs are promising catalysts via integrating the merits of intermetallics and high‐entropy alloys. [ABSTRACT FROM AUTHOR]

The production of formic acid via electrochemical CO2 reduction may serve as a key link for the carbon cycle in the formic acid economy, yet its practical feasibility is largely limited by the quantity and concentration of the product. Here we demonstrate continuous electrochemical CO2 reduction for formic acid production at 2 M at an industrial‐level current densities (i.e., 200 mA cm−2) for 300 h on membrane electrode assembly using scalable lattice‐distorted bismuth catalysts. The optimized catalysts also enable a Faradaic efficiency for formate of 94.2 % and a highest partial formate current density of 1.16 A cm−2, reaching a production rate of 21.7 mmol cm−2 h−1. To assess the practicality of this system, we perform a comprehensive techno‐economic analysis and life cycle assessment, showing that our approach can potentially substitute conventional methyl formate hydrolysis for industrial formic acid production. Furthermore, the resultant formic acid serves as direct fuel for air‐breathing formic acid fuel cells, boasting a power density of 55 mW cm−2 and an exceptional thermal efficiency of 20.1 %. [ABSTRACT FROM AUTHOR]

Efficiently transforming CO2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non‐toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO2 (CO2RR) on conventional carbon black‐supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp dz2 ${{d}_{{z}^{2}}}$ , dyz ${{d}_{yz}}$ , and dxz ${{d}_{xz}}$ orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p‐block elements. [ABSTRACT FROM AUTHOR]

The 14α‐demethylation step is critical in eukaryotic sterol biosynthesis, catalyzed by cytochrome P450 (P450) Family 51 enzymes, for example, with lanosterol in mammals. This conserved three‐step reaction terminates in a C−C cleavage step that generates formic acid, the nature of which has been controversial. Proposed mechanisms involve roles of P450 Compound 0 (ferric peroxide anion, FeO2−) or Compound I (perferryl oxygen, FeO3+) reacting with either the aldehyde or its hydrate, respectively. Analysis of 18O incorporation into formic acid from 18O2 provides a means of distinguishing the two mechanisms. Human P450 51A1 incorporated 88 % 18O (one atom) into formic acid, consistent with a major but not exclusive FeO2− mechanism. Two P450 51 orthologs from amoeba and yeast showed similar results, while two orthologs from pathogenic trypanosomes showed roughly equal contributions of both mechanisms. An X‐ray crystal structure of the human enzyme showed the aldehyde oxygen atom 3.5 Å away from the heme iron atom. Experiments with human P450 51A1 and H218O yielded primarily one 18O atom but 14 % of the formic acid product with two 18O atoms, indicative of a minor contribution of a Compound I mechanism. LC–MS evidence for a Compound 0‐derived Baeyer–Villiger reaction product (a 14α‐formyl ester) was also found. [ABSTRACT FROM AUTHOR]

Owing to outstanding performances, nickel‐based electrocatalysts are commonly used in electrochemical alcohol oxidation reactions (AORs), and the active phase is usually vacancy‐rich nickel oxide/hydroxide (NiOxHy) species. However, researchers are not aware of the catalytic role of atom vacancy in AORs. Here, we study vacancy‐induced catalytic mechanisms for AORs on NiOxHy species. As to AORs on oxygen‐vacancy‐poor β‐Ni(OH)2, the only redox mediator is electrooxidation‐induced electrophilic lattice oxygen species, which can only catalyze the dehydrogenation process (e.g. the electrooxidation of primary alcohol to carboxylic acid) instead of the C−C bond cleavage. Hence, vicinal diol electrooxidation reaction involving the C−C bond cleavage is not feasible with oxygen‐vacancy‐poor β‐Ni(OH)2. Only through oxygen vacancy‐induced adsorbed oxygen‐mediated mechanism, can oxygen‐vacancy‐rich NiOxHy species catalyze the electrooxidation of vicinal diol to carboxylic acid and formic acid accompanied with the C−C bond cleavage. Crucially, we examine how vacancies and vacancy‐induced catalytic mechanisms work during AORs on NiOxHy species. [ABSTRACT FROM AUTHOR]

The advancement of sustainable photoredox catalysis in synthetic organic chemistry has evolved immensely because of the development of versatile and cost‐effective reagents. In recent years, a substantial effort has been dedicated to exploring the utility of formic acid salts in various photochemical reactions. In this context, formates have demonstrated diverse capabilities, functioning as reductants, sources of carbonyl groups, and reagents for hydrogen atom transfer. Notably, the CO2⋅– radical anion derived from formate exhibits strong reductant properties for cleaving both C−X and C−O bonds. Moreover, these salts play a pivotal role in carboxylation reactions, further highlighting their significance in a variety of photochemical transformations. The ability of formates to serve as reductants, carbonyl sources, and hydrogen atom transfer reagents reveal exciting possibilities in synthetic organic chemistry. This minireview highlights an array of captivating discoveries, underscoring the crucial role of formates in diverse and distinctive photochemical methods, enabling access to a wide range of value‐added compounds. [ABSTRACT FROM AUTHOR]

Utilizing CO2‐derived formaldehyde derivatives for fuel additive or polymer synthesis is a promising approach to reduce net carbon dioxide emissions. Existing methodologies involve converting CO2 to methanol by thermal hydrogenation, followed by electrochemical or thermochemical oxidation to produce formaldehyde. Adding to the conventional methanol oxidation pathway, we propose a new electrochemical approach to simultaneously generate formaldehyde derivatives at both electrodes by partial methanol oxidation and the direct reduction of CO2. To achieve this, a method to directly reduce CO2 to formaldehyde at the cathode is required. Still, it has been scarcely reported previously due to the acidity of the formic acid intermediate and the facile over‐reduction of formaldehyde to methanol. By enabling the activation and subsequent stabilization of formic acid and formaldehyde respectively in methanol solvent, we were able to implement a strategy where formaldehyde derivatives were generated at the cathode alongside the anode. Further mechanism studies revealed that protons supplied from the anodic reaction contribute to the activation of formic acid and the stabilization of the formaldehyde product. Additionally, it was found that the cathodic formaldehyde derivative Faradaic efficiency can be further increased through prolonged electrolysis time up to 50 % along with a maximum anodic formaldehyde derivative Faradaic efficiency of 90 %. [ABSTRACT FROM AUTHOR]

Zeolitic metal–organic frameworks (ZMOFs) have emerged as one of the most promsing catalysts for energy conversion, but they suffer from either weak bonding between metal‐organic cubes (MOCs) that decrease their stability during catalysis processes or low activity due to inadequate active sites. In this work, through ligand‐directing strategy, we successfully obtain an unprecedented bismuth‐based ZMOF (Bi‐ZMOF) featuring a ACO topological crystal structure with strong coordination bonding between the Bi‐based cages. As a result, it enables efficient reduction of CO2 to formic acid (HCOOH) with Faradaic efficiency as high as 91 %. A combination of in situ surface‐enhanced infrared absorption spectroscopy and density functional theory calculation reveals that the Bi−N coordination contributes to facilitating charge transfer from N to Bi atoms, which stabilize the intermediate to boost the reduction efficiency of CO2 to HCOOH. This finding highlights the importance of the coordination environment of metal active sites on electrocatalytic CO2 reduction. We believe that this work will offer a new clue to rationally design zeolitic MOFs for catalytic reaction [ABSTRACT FROM AUTHOR]

Electrochemical CO2 reduction to value‐added chemicals or fuels offers a promising approach to reduce carbon emissions and alleviate energy shortage. Cu‐based electrocatalysts have been widely reported as capable of reducing CO2 to produce a variety of multicarbon products (e.g. ethylene and ethanol). In this work, we develop sulfur‐doped Cu2O electrocatalysts, which instead can electrochemically reduce CO2 to almost exclusively formate. We show that a dynamic equilibrium of S exists at the Cu2O‐electrolyte interface, and S‐doped Cu2O undergoes in situ surface reconstruction to generate active S‐adsorbed metallic Cu sites during the CO2 reduction reaction (CO2RR). Density functional theory (DFT) calculations together with in situ infrared absorption spectroscopy measurements show that the S‐adsorbed metallic Cu surface can not only promote the formation of the *OCHO intermediate but also greatly suppress *H and *COOH adsorption, thus facilitating CO2‐to‐formate conversion during the electrochemical CO2RR. [ABSTRACT FROM AUTHOR]

The development of practical materials for (de)hydrogenation reactions is a prerequisite for the launch of a sustainable hydrogen economy. Herein, we present the design and construction of an atomically dispersed dual‐metal site Co/Cu−N−C catalyst allowing significantly improved dehydrogenation of formic acid, which is available from carbon dioxide and green hydrogen. The active catalyst centers consist of specific CoCuN6 moieties with double‐N‐bridged adjacent metal‐N4 clusters decorated on a nitrogen‐doped carbon support. At optimal conditions the dehydrogenation performance of the nanostructured material (mass activity 77.7 L ⋅ gmetal−1 ⋅ h−1) is up to 40 times higher compared to commercial 5 % Pd/C. In situ spectroscopic and kinetic isotope effect experiments indicate that Co/Cu−N−C promoted formic acid dehydrogenation follows the so‐called formate pathway with the C−H dissociation of HCOO* as the rate‐determining step. Theoretical calculations reveal that Cu in the CoCuN6 moiety synergistically contributes to the adsorption of intermediate HCOO* and raises the d‐band center of Co to favor HCOO* activation and thereby lower the reaction energy barrier. [ABSTRACT FROM AUTHOR]

Detecting CO2 in complex gas mixtures is challenging due to the presence of competitive gases in the ambient atmosphere. Photoelectrochemical (PEC) techniques offer a solution, but material selection and specificity remain limiting. Here, we constructed a hydrogen‐bonded organic framework material based on a porphyrin tecton decorated with diaminotriazine (DAT) moieties. The DAT moieties on the porphyrin molecules not only facilitate the formation of complementary hydrogen bonds between the tectons but also function as recognition sites in the resulting porous HOF materials for the selective adsorption of CO2. In addition, the in‐plane growth of FDU‐HOF‐2 into anisotropic molecular sheets with large areas of up to 23000 μm2 and controllable thickness between 0.298 and 2.407 μm were realized in yields of over 89 % by a simple solution‐processing method. The FDU‐HOF‐2 can be directly grown and deposited onto different substrates including silica, carbon, and metal oxides by self‐assembly in situ in formic acid. As a proof of concept, a screen‐printing electrode deposited with FDU‐HOF‐2 was fabricate as a label‐free photoelectrochemical (PEC) sensor for CO2 detection. Such a signal‐off PEC sensor exhibits low detection limit for CO2 (2.3 ppm), reusability (at least 30 cycles), and long‐term working stability (at least 30 days). [ABSTRACT FROM AUTHOR]

Photosynthesis offers a green approach for the recycling of nicotinamide cofactors primarily NADH in bio‐redox reactions. Herein, we report an NADH photosynthesis system where the oxidation of biomass derivatives is designed as an electron supply module (ESM) to afford electrons and superoxide dismutase/catalase (SOD/CAT) cascade catalysis is designed as a reactive oxygen species (ROS) elimination module (REM) to inhibit NADH degradation. Glucose as the electron donor guarantees the reaction sustainability accompanied with oxidative products of gluconic acid and formic acid. Meanwhile, enzyme cascades of SOD/CAT greatly eliminate ROS, leading to a ≈2.00‐fold elevation of NADH yield (61.1 % vs. 30.7 %). The initial reaction rate and turnover frequency (TOF) increased by 2.50 times and 2.54 times, respectively, compared with those systems without REM. Our study establishes a novel and efficient platform for NADH photosynthesis coupled to biomass‐to‐chemical conversion. [ABSTRACT FROM AUTHOR]

Realizing industrial‐scale production of HCOOH from the CO2 reduction reaction (CO2RR) is very important, but the current density as well as the electrochemical potential window are still limited to date. Herein, we achieved this by integration of chemical adsorption and electrocatalytic capabilities for the CO2RR via anchoring In nanoparticles (NPs) on biomass‐derived substrates to create In/X−C (X=N, P, B) bifunctional active centers. The In NPs/chitosan‐derived N‐doped defective graphene (In/N‐dG) catalyst had outstanding performance for the CO2RR with a nearly 100 % Faradaic efficiency (FE) of HCOOH across a wide potential window. Particularly, at 1.2 A ⋅ cm−2 high current density, the FE of HCOOH was as high as 96.0 %, and the reduction potential was as low as −1.17 V vs RHE. When using a membrane electrode assembly (MEA), a pure HCOOH solution could be obtained at the cathode without further separation and purification. The FE of HCOOH was still up to 93.3 % at 0.52 A ⋅ cm−2, and the HCOOH production rate could reach 9.051 mmol ⋅ h−1 ⋅ cm−2. Our results suggested that the defects and multilayer structure in In/N‐dG could not only enhance CO2 chemical adsorption capability, but also trigger the formation of an electron‐rich catalytic environment around In sites to promote the generation of HCOOH. [ABSTRACT FROM AUTHOR]

Ionic liquids (ILs) are considered to be potential material devices for CO2 capturing and conversion to energy‐adducts. They form a cage (confined‐space) around the catalyst providing an ionic nano‐container environment which serves as physical‐chemical barrier that selectively controls the diffusion of reactants, intermediates, and products to the catalytic active sites via their hydrophobicity and contact ion pairs. Hence, the electronic properties of the catalysts in ILs can be tuned by the proper choice of the IL‐cations and anions that strongly influence the residence time/diffusion of the reactants, intermediates, and products in the nano‐environment. On the other hand, ILs provide driving force towards photocatalytic redox process to increase the CO2 photoreduction. By combining ILs with the semiconductor, unique solid semiconductor‐liquid commodities are generated that can lower the CO2 activation energy barrier by modulating the electronic properties of the semiconductor surface. This mini‐review provides a brief overview of the recent advances in IL assisted thermal conversion of CO2 to hydrocarbons, formic acid, methanol, dimethyl carbonate, and cyclic carbonates as well as its photo‐conversion to solar fuels. [ABSTRACT FROM AUTHOR]

The development of a new electrolytic water hydrogen production coupling system is the key to realize efficient and low‐cost hydrogen production and promote its practical application. Herein, a green and efficient electrocatalytic biomass to formic acid (FA) coupled hydrogen production system has been developed. In such a system, carbohydrates such as glucose are oxidized to FA using polyoxometalates (POMs) as the redox anolyte, while H2 is evolved continuously at the cathode. Among them, the yield of glucose to FA is as high as 62.5 %, and FA is the only liquid product. Furthermore, the system requires only 1.22 V to drive a current density of 50 mA cm−2, and the Faraday efficiency of hydrogen production is close to 100 %. Its electrical consumption is only 2.9 kWh Nm−3 (H2), which is only 69 % of that of traditional electrolytic water. This work opens up a promising direction for low‐cost hydrogen production coupled with efficient biomass conversion. [ABSTRACT FROM AUTHOR]

Certain metal complexes are known as high‐performance CO2 reduction photocatalysts driven by visible light. However, most of them rely on rare, precious metals as principal components, and integrating the functions of light absorption and catalysis into a single molecular unit based on abundant metals remains a challenge. Metal‐organic frameworks (MOFs), which can be regarded as intermediate compounds between molecules and inorganic solids, are potential platforms for the construction of a simple photocatalytic system composed only of Earth‐abundant nontoxic elements. In this work, we report that a tin‐based MOF enables the conversion of CO2 into formic acid with a record high apparent quantum yield (9.8 % at 400 nm) and >99 % selectivity without the need for any additional photosensitizer or catalyst. This work highlights a new MOF with strong potential for photocatalytic CO2 reduction driven by solar energy. [ABSTRACT FROM AUTHOR]

While most nanoproteomics approaches for the analysis of low‐input samples are based on bottom‐up proteomics workflows, top‐down approaches enabling proteoform characterization are still underrepresented. Using mammalian cell proteomes, we established a facile one‐pot sample preparation protocol based on protein aggregation on magnetic beads and intact proteoform elution using 40 % formic acid. Performed on a digital microfluidics device, the workflow enabled sensitive analyses of single Caenorhabditis elegans nematodes, thereby increasing the number of proteoform identifications compared to in‐tube sample preparation by 46 %. Label‐free quantification of single nematodes grown under different conditions allowed to identify changes in the abundance of proteoforms not distinguishable by bottom‐up proteomics. The presented workflow will facilitate proteoform‐directed analysis on samples of limited availability. [ABSTRACT FROM AUTHOR]

Rational design of the proximal coordination of an active site to achieve its optimum catalytic activity is the ultimate goal in single‐atom catalysis, but still challenging. Here, we report theoretical prediction and experimental realization of an asymmetrically coordinated iridium single‐atom catalyst (IrN3O) for the formic acid oxidation reaction (FAOR). Theoretical calculations reveal that the substitution of one or two nitrogen with more electronegative oxygen in the symmetric IrN4 motif splits and downshifts the Ir 5d orbitals with respect to the Fermi level, moderating the binding strength of key intermediates on IrN4−xOx (x=1, 2) sites, especially that the IrN3O motif shows ideal activity for FAOR with a near‐zero overpotential. The as‐designed asymmetric Ir motifs were realized by pyrolyzing Ir precursor with oxygen‐rich glucose and nitrogen‐rich melamine, exhibiting a mass activity of 25 and 87 times greater than those of state‐of‐the‐art Pd/C and Pt/C, respectively. [ABSTRACT FROM AUTHOR]

Two‐dimensional (2D) materials catalysts provide an atomic‐scale view on a fascinating arena for understanding the mechanism of electrocatalytic carbon dioxide reduction (CO2 ECR). Here, we successfully exfoliated both layered and nonlayered ultra‐thin metal phosphorous trichalcogenides (MPCh3) nanosheets via wet grinding exfoliation (WGE), and systematically investigated the mechanism of MPCh3 as catalysts for CO2 ECR. Unlike the layered CoPS3 and NiPS3 nanosheets, the active Sn atoms tend to be exposed on the surfaces of nonlayered SnPS3 nanosheets. Correspondingly, the nonlayered SnPS3 nanosheets exhibit clearly improved catalytic activity, showing formic acid selectivity up to 31.6 % with −7.51 mA cm−2 at −0.65 V vs. RHE. The enhanced catalytic performance can be attributed to the formation of HCOO* via the first proton‐electron pair addition on the SnPS3 surface. These results provide a new avenue to understand the novel CO2 ECR mechanism of Sn‐based and MPCh3‐based catalysts. [ABSTRACT FROM AUTHOR]

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single‐atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well‐defined and readily tailorable structure of graphdiyne (GDY), an Au single‐atom catalyst on amino‐substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino‐decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au−H to generate H2. Our study paves the way to precisely constructing the functional second sphere on single‐atom catalysts. [ABSTRACT FROM AUTHOR]

Electrochemically reducing CO2 to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn‐based catalysts have been widely studied for electrochemical CO2 reduction reaction (CO2RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen‐incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO2RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen‐incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO2RR to produce formate. [ABSTRACT FROM AUTHOR]

The renewable‐electricity‐driven CO2 reduction to formic acid would contribute to establishing a carbon‐neutral society. The current catalyst suffers from limited activity and stability under high selectivity and the ambiguous nature of active sites. Herein, we report a powerful Bi2S3‐derived catalyst that demonstrates a current density of 2.0 A cm−2 with a formate Faradaic efficiency of 93 % at −0.95 V versus the reversible hydrogen electrode. The energy conversion efficiency and single‐pass yield of formate reach 80 % and 67 %, respectively, and the durability reaches 100 h at an industrial‐relevant current density. Pure formic acid with a concentration of 3.5 mol L−1 has been produced continuously. Our operando spectroscopic and theoretical studies reveal the dynamic evolution of the catalyst into a nanocomposite composed of Bi0 clusters and Bi2O2CO3 nanosheets and the pivotal role of Bi0−Bi2O2CO3 interface in CO2 activation and conversion. [ABSTRACT FROM AUTHOR]

High‐entropy alloys (HEAs) have been attracting extensive research interests in designing advanced nanomaterials, while their precise control is still in the infancy stage. Herein, we have reported a well‐defined PtBiPbNiCo hexagonal nanoplates (HEA HPs) as high‐performance electrocatalysts. Structure analysis decodes that the HEA HP is constructed with PtBiPb medium‐entropy core and PtBiNiCo high‐entropy shell. Significantly, the HEA HPs can reach the specific and mass activities of 27.2 mA cm−2 and 7.1 A mgPt−1 for formic acid oxidation reaction (FAOR), being the record catalyst ever achieved in Pt‐based catalysts, and can realize the membrane electrode assembly (MEA) power density (321.2 mW cm−2) in fuel cell. Further experimental and theoretical analyses collectively evidence that the hexagonal intermetallic core/atomic layer shell structure and multi‐element synergy greatly promote the direct dehydrogenation pathway of formic acid molecule and suppress the formation of CO*. [ABSTRACT FROM AUTHOR]

Easily accessible via a simple esterification of alcohols with formic acid, alkyl formates are used as a novel class of transfer hydroalkylation reagents, CO2 acting as a traceless linker. As a proof‐of‐concept, their reactivity in the transfer hydroalkylation of imines is investigated, using a ruthenium‐based catalyst and LiI as promoter to cleave the C−O σ‐bond of the formate scaffold. Providing tertiary amines, the reaction displays a divergent regioselectivity compared to previously reported transfer hydroalkylation strategies. [ABSTRACT FROM AUTHOR]

A crucial chain‐branching step in autoignition is the decomposition of ketohydroperoxides (KHP) to form an oxy radical and OH. Other pathways compete with chain‐branching, such as "Korcek" dissociation of γ‐KHP to a carbonyl and an acid. Here we characterize the formation of a γ‐KHP and its decomposition to formic acid+acetone products from observations of n‐butane oxidation in two complementary experiments. In jet‐stirred reactor measurements, KHP is observed above 590 K. The KHP concentration decreases with increasing temperature, whereas formic acid and acetone products increase. Observation of characteristic isotopologs acetone‐d3 and formic acid‐d0 in the oxidation of CH3CD2CD2CH3 is consistent with a Korcek mechanism. In laser‐initiated oxidation experiments of n‐butane, formic acid and acetone are produced on the timescale of KHP removal. Modelling the time‐resolved production of formic acid provides an estimated upper limit of 2 s−1 for the rate coefficient of KHP decomposition to formic acid+acetone. [ABSTRACT FROM AUTHOR]

Herein we disclose a mild protocol for the reductive functionalisation of quinolinium and isoquinolinium salts. The reaction proceeds under transition‐metal‐free conditions as well as under rhodium catalysis with very low catalyst loadings (0.01 mol %) and uses inexpensive formic acid as the terminal reductant. A wide range of electrophiles, including enones, imides, unsaturated esters and sulfones, β‐nitro styrenes and aldehydes are intercepted by the in situ formed enamine species forming a large variety of substituted tetrahydro(iso)quinolines. Electrophiles are incorporated at the C‐3 and C‐4 position for quinolines and isoquinolines respectively, providing access to substitution patterns which are not favoured in electrophilic or nucleophilic aromatic substitution. Finally, this reactivity was exploited to facilitate three types of annulation reactions, giving rise to complex polycyclic products of a formal [3+3] or [4+2] cycloaddition. [ABSTRACT FROM AUTHOR]

It is of profound significance concerning the global energy and environmental crisis to develop new techniques that can reduce and convert CO2. To address this challenge, we built a new type of artificial photoenzymatic system for CO2 reduction, using a rationally designed mesoporous olefin‐linked covalent organic framework (COF) as the porous solid carrier for co‐immobilizing formate dehydrogenase (FDH) and Rh‐based electron mediator. By adjusting the incorporating content of the Rh electronic mediator, which facilitates the regeneration of nicotinamide cofactor (NADH) from NAD+, the apparent quantum yield can reach as high as 9.17±0.44 %, surpassing all reported NADH‐regenerated photocatalysts constructed by crystalline framework materials. Finally, the assembled photocatalyst–enzyme coupled system can selectively convert CO2 to formic acid with high efficiency and good reusability. This work demonstrates the first example using COFs to immobilize enzymes for artificial photosynthesis systems that utilize solar energy to produce value‐added chemicals. [ABSTRACT FROM AUTHOR]

It is of profound significance concerning the global energy and environmental crisis to develop new techniques that can reduce and convert CO2. To address this challenge, we built a new type of artificial photoenzymatic system for CO2 reduction, using a rationally designed mesoporous olefin‐linked covalent organic framework (COF) as the porous solid carrier for co‐immobilizing formate dehydrogenase (FDH) and Rh‐based electron mediator. By adjusting the incorporating content of the Rh electronic mediator, which facilitates the regeneration of nicotinamide cofactor (NADH) from NAD+, the apparent quantum yield can reach as high as 9.17±0.44 %, surpassing all reported NADH‐regenerated photocatalysts constructed by crystalline framework materials. Finally, the assembled photocatalyst–enzyme coupled system can selectively convert CO2 to formic acid with high efficiency and good reusability. This work demonstrates the first example using COFs to immobilize enzymes for artificial photosynthesis systems that utilize solar energy to produce value‐added chemicals. [ABSTRACT FROM AUTHOR]

We report a stereoselective conversion of terminal alkynes to α‐chiral carboxylic acids using a nickel‐catalyzed domino hydrocarboxylation‐transfer hydrogenation reaction. A simple nickel/BenzP* catalyst displayed high activity in both steps of regioselective hydrocarboxylation of alkynes and subsequent asymmetric transfer hydrogenation. The reaction was successfully applied in enantioselective preparation of three nonsteroidal anti‐inflammatory profens (>90 % ees) and the chiral fragment of AZD2716. [ABSTRACT FROM AUTHOR]

Two new chemically stable metalloporphyrin‐bridged metal‐catechol frameworks, InTCP‐Co and FeTCP‐Co, were constructed to achieve artificial photosynthesis without additional sacrificial agents and photosensitizers. The CO2 photoreduction rate over FeTCP‐Co considerably exceeds that obtained over InTCP‐Co, and the incorporation of uncoordinated hydroxyl groups, associated with catechol, into the network further promotes the photocatalytic activity. The iron‐oxo coordination chain assists energy band alignment and provides a redox‐active site, and the uncoordinated hydroxyl group contributes to the visible‐light absorptance, charge‐carrier transfer, and CO2‐scaffold affinity. With a formic acid selectivity of 97.8 %, FeTCP‐OH‐Co affords CO2 photoconversion with a reaction rate 4.3 and 15.7 times higher than those of FeTCP‐ Co and InTCP‐Co, respectively. These findings are also consistent with the spectroscopic study and DFT calculation. [ABSTRACT FROM AUTHOR]

Proton transfer via tunneling is a fundamental quantum‐mechanical phenomenon. We report rotational spectroscopy measurements of this process in the complex of the formic acid dimer with fluorobenzene. The assignment of the spectrum indicates that this complex exists in the form of a π–π stacked structure. Each rotational transition of the parent isotopologue exhibits splitting. Isotopic substitution experiments show that the spectral splitting results from double‐proton transfer tunneling in the formic acid dimer. Presence of fluorobenzene as a neighboring molecule does not quench the double proton transfer in the formic acid dimer but decreases its tunneling splitting from 341(3) MHz to 267.608(1) MHz. Calculations suggest that the presence of the weakly bounded fluorobenzene does not influence the activation energy of the proton transfer. The fluorobenzene is reoriented with respect to the formic acid dimer during the course of the reaction, slowing down the proton transfer motion. [ABSTRACT FROM AUTHOR]

Electrocatalytic hydrogen production under acidic conditions is of great importance for industrialization in comparison to that in alkaline media, which, unfortunately, still remains challenging due to the lack of earth‐abundant, cost‐effective and highly active anodic electrocatalysts that can be used durably under strongly acidic conditions. Here we report an unexpected finding that manganese oxide, a kind of common non‐noble catalysts easily soluble in acidic solutions, can be applied as a highly efficient and extremely durable anodic electrocatalyst for hydrogen production from an acidic aqueous solution of alcohols. Particularly in a glycerol solution, a potential of as low as 1.36 V (vs. RHE) is needed at 10 mA cm−2, which is 270 mV lower than that of oxygen evolution reaction (OER), to oxidize glycerol into value‐added chemicals such as formic acid, without oxygen production. To our surprise, the manganese oxide exhibits extremely high stability for electrocatalytic hydrogen production in coupling with glycerol oxidation for longer than 865 hours compared to shorter than 10 h for OER. Moreover, the effect of the addition of glycerol on the electrochemical durability has been probed via in situ Raman spectroscopic analysis and density functional theory (DFT) calculations. This work demonstrates that acid‐unstable metal oxide electrocatalysts can be used robustly in acidic media under the presence of certain substances for electrochemical purposes, such as hydrogen production. [ABSTRACT FROM AUTHOR]

Compared to the current mainstream rigid covalent organic frameworks (COFs) linked by imine bonds, flexible COFs have certain advantages of elasticity and self‐adaptability, but their construction and application are greatly limited by the complexity in synthesis and difficulty in obtaining regular structure. Herein, we reported for the first time a series of flexible amine‐linked COFs with high crystallinity synthesized by formic acid with unique catalytic and reductive bifunctional properties, rather than acetic acid, the most common catalyst for COF synthesis. The reaction mechanism was demonstrated to be a synchronous in situ reduction during the formation of imine bond. The flexibilities of the products endow them with accommodative adaptability to guest molecules, thus increasing the adsorption capacities for nitrogen and iodine by 27 % and 22 %, respectively. Impressively, a novel concept of flexibilization degree was proposed firstly, which provides an effective approach to rationally measure the flexibility of COFs. [ABSTRACT FROM AUTHOR]

Electrochemical reduction of CO2 (CO2RR) into valuable hydrocarbons is appealing in alleviating the excessive CO2 level. We present the very first utilization of metallic bismuth–tin (Bi‐Sn) aerogel for CO2RR with selective HCOOH production. A non‐precious bimetallic aerogel of Bi‐Sn is readily prepared at ambient temperature, which exhibits 3D morphology with interconnected channels, abundant interfaces and a hydrophilic surface. Superior to Bi and Sn, the Bi‐Sn aerogel exposes more active sites and it has favorable mass transfer properties, which endow it with a high FEHCOOH of 93.9 %. Moreover, the Bi‐Sn aerogel achieves a FEHCOOH of ca. 90 % that was maintained for 10 h in a flow battery. In situ ATR‐FTIR measurements confirmed that the formation of *HCOO is the rate‐determining step toward formic acid generation. DFT demonstrated the coexistence of Bi and Sn optimized the energy barrier for the production of HCOOH, thereby improving the catalytic activity. [ABSTRACT FROM AUTHOR]

H2O2 as a well‐known efficient oxidant is widely used in the chemical industry mainly because of its homolytic cleavage into.OH (stronger oxidant), but this reaction always competes with O2 generation resulting in H2O2 waste. Here, we fabricate heterogeneous Fenton‐type Fe‐based catalysts containing Fe‐Nx sites and Fe/Fe3C nanoparticles as a model to study this competition. Fe‐Nx in the low spin state provides the active site for.OH generation. Fe/Fe3C, in particular Fe3C, promotes Fe‐Nx sites for the homolytic cleavages of H2O2 into.OH, but Fe/Fe3C nanoparticles (Fe0 as the main component) with more electrons are prone to the undesired O2 generation. With a catalyst benefiting from finely tuned active sites, 18 % conversion rate for the selective oxidation of methane was achieved with about 96 % selectivity for liquid oxygenates (formic acid selectivity over 90 %). Importantly, O2 generation was suppressed 68 %. This work provides guidance for the efficient utilization of H2O2 in the chemical industry. [ABSTRACT FROM AUTHOR]

Formic acid (HCOOH) is one of the most promising chemical fuels that can be produced through CO2 electroreduction. However, most of the catalysts for CO2 electroreduction to HCOOH in aqueous solution often suffer from low current density and limited production rate. Herein, we provide a bismuth/cerium oxide (Bi/CeOx) catalyst, which exhibits not only high current density (149 mA cm−2), but also unprecedented production rate (2600 μmol h−1 cm−2) with high Faradaic efficiency (FE, 92 %) for HCOOH generation in aqueous media. Furthermore, Bi/CeOx also shows favorable stability over 34 h. We hope this work could offer an attractive and promising strategy to develop efficient catalysts for CO2 electroreduction with superior activity and desirable stability. [ABSTRACT FROM AUTHOR]

Formic acid (HCOOH) is one of the most promising chemical fuels that can be produced through CO2 electroreduction. However, most of the catalysts for CO2 electroreduction to HCOOH in aqueous solution often suffer from low current density and limited production rate. Herein, we provide a bismuth/cerium oxide (Bi/CeOx) catalyst, which exhibits not only high current density (149 mA cm−2), but also unprecedented production rate (2600 μmol h−1 cm−2) with high Faradaic efficiency (FE, 92 %) for HCOOH generation in aqueous media. Furthermore, Bi/CeOx also shows favorable stability over 34 h. We hope this work could offer an attractive and promising strategy to develop efficient catalysts for CO2 electroreduction with superior activity and desirable stability. [ABSTRACT FROM AUTHOR]

Biomass‐derived 5‐hydroxymethylfurfural (HMF) is regarded as one of the most promising platform chemicals to produce 2,5‐dimethylfuran (DMF) as a potential liquid transportation fuel. Pd nanoparticles supported on N‐containing and N‐free mesoporous carbon materials were prepared, characterized, and applied in the hydrogenolysis of HMF to DMF under mild reaction conditions. Quantitative conversion of HMF to DMF was achieved in the presence of formic acid (FA) and H2 over Pd/NMC within 2 h. The reaction mechanism, especially the multiple roles of FA, was explored through a detailed comparative study by varying hydrogen source, additive, and substrate as well as by applying in situ ATR‐IR spectroscopy. The major role of FA is to shift the dominant reaction pathway from the hydrogenation of the aldehyde group to the hydrogenolysis of the hydroxymethyl group via the protonation by FA at the C‐OH group, lowering the activation barrier of the C−O bond cleavage and thus significantly enhancing the reaction rate. XPS results and DFT calculations revealed that Pd2+ species interacting with pyridine‐like N atoms significantly enhance the selective hydrogenolysis of the C−OH bond in the presence of FA due to their high ability for the activation of FA and the stabilization of H−. [ABSTRACT FROM AUTHOR]

The electrochemical conversion of carbon dioxide into energy‐carrying compounds or value‐added chemicals is of great significance for diminishing the greenhouse effect and the efficient utilization of carbon‐dioxide emissions, but it suffers from the kinetically sluggish anodic oxygen evolution reaction (OER) and its less value‐added production of O2. We report a general strategy for efficient formic‐acid synthesis by a concurrent cathodic CO2 reduction and anodic partial methanol‐oxidation reaction (MOR) using mesoporous SnO2 grown on carbon cloth (mSnO2/CC) and CuO nanosheets grown on copper foam (CuONS/CF) as cathodic and anodic catalysts, respectively. Anodic CuONS/CF enables an extremely lowered potential of 1.47 V vs. RHE (100 mA cm−2), featuring a significantly enhanced electro‐activity in comparison to the OER. The cathodic mSnO2/CC shows a rather high Faraday efficiency of 81 % at 0.7 V vs. RHE for formic‐acid production from CO2. The established electrolyzer equipped with CuONS/CF at the anode and mSnO2/CC at the cathode requires a considerably low cell voltage of 0.93 V at 10 mA cm−2 for formic‐acid production at both sides. [ABSTRACT FROM AUTHOR]

A methanol economy will be favored by the availability of low‐cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO2 as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost‐efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway. [ABSTRACT FROM AUTHOR]

A CO2‐mediated hydrogen storage energy cycle is a promising way to implement a hydrogen economy, but the exploration of efficient catalysts to achieve this process remains challenging. Herein, sub‐nanometer Pd–Mn clusters were encaged within silicalite‐1 (S‐1) zeolites by a ligand‐protected method under direct hydrothermal conditions. The obtained zeolite‐encaged metallic nanocatalysts exhibited extraordinary catalytic activity and durability in both CO2 hydrogenation into formate and formic acid (FA) dehydrogenation back to CO2 and hydrogen. Thanks to the formation of ultrasmall metal clusters and the synergic effect of bimetallic components, the PdMn0.6@S‐1 catalyst afforded a formate generation rate of 2151 molformate molPd−1 h−1 at 353 K, and an initial turnover frequency of 6860 molH2 molPd−1 h−1 for CO‐free FA decomposition at 333 K without any additive. Both values represent the top levels among state‐of‐the‐art heterogeneous catalysts under similar conditions. This work demonstrates that zeolite‐encaged metallic catalysts hold great promise to realize CO2‐mediated hydrogen energy cycles in the future that feature fast charge and release kinetics. [ABSTRACT FROM AUTHOR]

A bifunctional 3d‐metal catalyst for the cascade synthesis of diverse pyrroles from nitroarenes is presented. The optimal catalytic system Co/NGr‐C@SiO2‐L is obtained by pyrolysis of a cobalt‐impregnated composite followed by subsequent selective leaching. In the presence of this material, (transfer) hydrogenation of easily available nitroarenes and subsequent Paal–Knorr/Clauson‐Kass condensation provides >40 pyrroles in good to high yields using dihydrogen, formic acid, or a CO/H2O mixture (WGSR conditions) as reductant. In addition to the favorable step economy, this straightforward domino process does not require any solvents or external co‐catalysts. The general synthetic utility of this methodology was demonstrated on a variety of functionalized substrates including the preparation of biologically active and pharmaceutically relevant compounds, for example, (+)‐Isamoltane. [ABSTRACT FROM AUTHOR]

Metal–organic framework (MOF)‐derived Co‐N‐C catalysts with isolated single cobalt atoms have been synthesized and compared with cobalt nanoparticles for formic acid dehydrogenation. The atomically dispersed Co‐N‐C catalyst achieves superior activity, better acid resistance, and improved long‐term stability compared with nanoparticles synthesized by a similar route. High‐angle annular dark‐field–scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, electron paramagnetic resonance, and X‐ray absorption fine structure characterizations reveal the formation of CoIINx centers as active sites. The optimal low‐cost catalyst is a promising candidate for liquid H2 generation. [ABSTRACT FROM AUTHOR]