Search

Direct saline (seawater) electrolysis is a well‐recognized system to generate active chlorine species for the chloride‐mediated electrosynthesis, environmental remediation and sterilization over the past few decades. However, the large energy consumption originated from the high cell voltage of traditional direct saline electrolysis system, greatly restricts its practical application. Here, we report an acid‐saline hybrid electrolysis system for energy‐saving co‐electrosynthesis of active chlorine and H2. We demonstrate that this system just requires a low cell voltage of 1.59 V to attain 10 mA cm−2 with a large energy consumption decrease of 27.7 % compared to direct saline electrolysis system (2.20 V). We further demonstrate that such acid‐saline hybrid electrolysis system could be extended to realize energy‐saving and sustainable seawater electrolysis. The acidified seawater in this system can absolutely avoid the formation of Ca/Mg‐based sediments that always form in the seawater electrolysis system. We also prove that this system in the half‐flow mode can realize real‐time preparation of active chlorine used for sterilization and pea sprout production. [ABSTRACT FROM AUTHOR]

Platinum metal (PtM, M=Ni, Fe, Co) alloys catalysts show high oxygen reduction reaction (ORR) activity due to their well‐known strain and ligand effects. However, these PtM alloys usually suffer from a deficient ORR durability in acidic environment as the alloyed metal is prone to be dissolved due to its high electronegativity. Herein, we report a new class of PtMn alloy nanodendrite catalyst with low‐electronegativity Mn‐contraction for boosting the oxygen reduction durability of fuel cells. The moderate strain in PtMn, induced by Mn contraction, yields optimal oxygen reduction activity at 0.53 A mg−1 at 0.9 V versus reversible hydrogen electrode (RHE). Most importantly, we show that relative to well‐known high‐electronegativity Ni‐based Pt alloy counterpart, the PtMn nanodendrite catalyst experiences less transition metals' dissolution in acidic solution and achieves an outstanding mass activity retention of 96 % after 10,000 degradation cycles. Density functional theory calculation reveals that PtMn alloys are thermodynamically more stable than PtNi alloys in terms of formation enthalpy and cohesive energy. The PtMn nanodendrite‐based membrane electrode assembly delivers an outstanding peak power density of 1.36 W cm−2 at a low Pt loading and high‐performance retention over 50 h operations at 0.6 V in H2‐O2 hydrogen fuel cells. [ABSTRACT FROM AUTHOR]

Constructing well‐designed catalysts to accelerate OER catalytic activity and alleviate the charge overpotential is prevailing for achieving sophisticated Li−O2 batteries. Herein, we report a concept for engineering the eg occupancy of Pt with M alloying (M=Au, Ru) to tune the charge overpotentials for achieving high‐performance Li−O2 batteries. The X‐ray photoelectron spectroscopy results coupled with density functional theory (DFT) calculations reveal that the highly electronegative Au can capture more eg electrons from Pt, leading to less eg electrons of Pt in PtAu than that in PtRu. The lower eg occupancy of Pt atoms in PtAu alloys entails the upward shift of the Pt d band, which causes a strong binding strength towards the intermediates (LiO2), thereby decreasing the OER energy barrier. As a consequence, the Li−O2 battery with a PtAu cathode delivers a low charge overpotential of 0.36 V and superior cycle life of 220 cycles at a cutoff capacity of 1000 mAh g−1, which is among the best in the reported noble metal‐based cathodes. [ABSTRACT FROM AUTHOR]

The sluggish oxygen reaction kinetics concomitant with the high overpotentials and parasitic reactions from cathodes and solvents is the major challenge in aprotic lithium‐oxygen (Li–O2) batteries. Herein, PtIr multipods with a low Lewis acidity of the Pt atoms are reported as an advanced cathode for improving overpotentials and stabilities. DFT calculations disclose that electrons have a strong disposition to transfer from Ir to Pt, since Pt has a higher electronegativity than Ir, resulting in a lower Lewis acidity of the Pt atoms than that on the pure Pt surface. The low Lewis acidity of Pt atoms on the PtIr surface entails a high electron density and a down‐shifting of the d‐band center, thereby weakening the binding energy towards intermediates (LiO2), which is the key in achieving low oxygen‐reduction‐reaction (ORR) and oxygen‐evolution‐reaction (OER) overpotentials. The Li–O2 cell based on PtIr electrodes exhibits a very low overall discharge/charge overpotential (0.44 V) and an excellent cycle life (180 cycles), outperforming the bulk of reported noble‐metal‐based cathodes. [ABSTRACT FROM AUTHOR]

The development of high‐performance anode materials for potassium‐based energy storage devices with long‐term cyclability requires combined innovations from rational material design to electrolyte optimization. A three‐dimensional K+‐pre‐intercalated Ti3C2Tx MXene with enlarged interlayer distance was constructed for efficient electrochemical potassium‐ion storage. We found that the optimized solvation structure of the concentrated ether‐based electrolyte leads to the formation of a thin and inorganic‐rich solid electrolyte interphase (SEI) on the K+‐pre‐intercalated Ti3C2Tx electrode, which is beneficial for interfacial stability and reaction kinetics. As a proof of concept, 3D K+‐Ti3C2Tx//activated carbon (AC) potassium‐ion hybrid capacitors (PIHCs) were assembled, which exhibited promising electrochemical performances. These results highlight the significant roles of both rational structure design and electrolyte optimization for highly reactive MXene‐based anode materials in energy storage devices. [ABSTRACT FROM AUTHOR]

PtSe2 is a typical noble metal dichalcogenide (NMD) that holds promising possibility for next‐generation electronics and photonics. However, when applied in hydrogen evolution reaction (HER), it exhibits sluggish kinetics due to the insufficient capability of absorbing active species. Here, we construct PtSe2/Pt heterointerface to boost the reaction dynamics of PtSe2, enabled by an in situ electrochemical method. It is found that Se vacancies are induced around the heterointerface, reducing the coordination environment. Correspondingly, the exposed Pt atoms at the very vicinity of Se vacancies are activated, with enhanced overlap with H 1s orbital. The adsorption of H. intermediate is thus strengthened, achieving near thermoneutral free energy change. Consequently, the as‐prepared PtSe2/Pt exhibits extraordinary HER activity even superior to Pt/C, with an overpotential of 42 mV at 10 mA cm−2 and a Tafel slope of 53 mV dec−1. This work raises attention on NMDs toward HER and provides insights for the rational construction of novel heterointerfaces. [ABSTRACT FROM AUTHOR]

Traditional methods for analyzing organophosphorus pesticide chlorpyrifos, usually require the tedious sample pretreatment and sophisticated bio‐interfaces, leading to the difficulty for real‐time analysis. Herein, we use palladium single‐atom (PdSA)/TiO2 as a photocatalytic sensing platform to directly detect chlorpyrifos with high sensitivity and selectivity. PdSA/TiO2, prepared by an in situ photocatalytic reduction of PdCl42− on the TiO2, shows much higher photocatalytic activity (10 mol g−1 h−1) for hydrogen evolution reaction than Pd nanoparticles (1.95 mol g−1 h−1), and excellent stability. In the presence of chlorpyrifos, the photocatalytic activity of PdSA/TiO2 decreases. Through this inhibition effect the platform can realize a detection limit for chlorpyrifos of 0.01 ng mL−1, much lower than the maximum residue limit (10 ppb) permitted by the U.S. Environmental Protection Agency. [ABSTRACT FROM AUTHOR]

Structure and defect control are widely accepted effective strategies to manipulate the activity and stability of catalysts. On a freestanding hierarchically porous carbon microstructure, the tuning of oxygen vacancy in the embedded hollow cobaltosic oxide (Co3O4) nanoparticles is demonstrated through the regulation of nanoscale Kirkendall effect. Starting with the embedded cobalt nanoparticles, the concentration of oxygen‐vacancy defect can vary with the degree of Kirkendall oxidation, thus regulating the number of active sites and the catalytic performances. The optimized freestanding catalyst shows among the smallest reversible oxygen overpotential of 0.74 V for catalyzing oxygen reduction/evolution reactions in 0.1 m KOH. Moreover, the catalyst shows promise for substitution of noble metals to boost cathodic oxygen reactions in portable zinc–air batteries. This work provides a strategy to explore catalysts with controllable vacancy defects and desired nano‐/microstructures. [ABSTRACT FROM AUTHOR]

Proton adsorption on metallic catalysts is a prerequisite for efficient hydrogen evolution reaction (HER). However, tuning proton adsorption without perturbing metallicity remains a challenge. A Schottky catalyst based on metal-semiconductor junction principles is presented. With metallic MoB, the introduction of n-type semiconductive g-C3N4 induces a vigorous charge transfer across the MoB/g-C3N4 Schottky junction, and increases the local electron density in MoB surface, confirmed by multiple spectroscopic techniques. This Schottky catalyst exhibits a superior HER activity with a low Tafel slope of 46 mV dec−1 and a high exchange current density of 17 μA cm−2, which is far better than that of pristine MoB. First-principle calculations reveal that the Schottky contact dramatically lowers the kinetic barriers of both proton adsorption and reduction coordinates, therefore benefiting surface hydrogen generation. [ABSTRACT FROM AUTHOR]

Replacing the rare and precious platinum (Pt) electrocatalysts with earth-abundant materials for promoting the oxygen reduction reaction (ORR) at the cathode of fuel cells is of great interest in developing high-performance sustainable energy devices. However, the challenging issues associated with non-Pt materials are still their low intrinsic catalytic activity, limited active sites, and the poor mass transport properties. Recent advances in material sciences and nanotechnology enable rational design of new earth-abundant materials with optimized composition and fine nanostructure, providing new opportunities for enhancing ORR performance at the molecular level. This Review highlights recent breakthroughs in engineering nanocatalysts based on the earth-abundant materials for boosting ORR. [ABSTRACT FROM AUTHOR]

The development of high‐performance anode materials for potassium‐based energy storage devices with long‐term cyclability requires combined innovations from rational material design to electrolyte optimization. A three‐dimensional K+‐pre‐intercalated Ti3C2Tx MXene with enlarged interlayer distance was constructed for efficient electrochemical potassium‐ion storage. We found that the optimized solvation structure of the concentrated ether‐based electrolyte leads to the formation of a thin and inorganic‐rich solid electrolyte interphase (SEI) on the K+‐pre‐intercalated Ti3C2Tx electrode, which is beneficial for interfacial stability and reaction kinetics. As a proof of concept, 3D K+‐Ti3C2Tx//activated carbon (AC) potassium‐ion hybrid capacitors (PIHCs) were assembled, which exhibited promising electrochemical performances. These results highlight the significant roles of both rational structure design and electrolyte optimization for highly reactive MXene‐based anode materials in energy storage devices. [ABSTRACT FROM AUTHOR]