Search

Emerging high entropy compounds (HECs) have attracted huge attention in electrochemical energy‐related applications. The features of ultrafine size and carbon incorporation show great potential to boost the ion‐storage kinetics of HECs. However, they are rarely reported because high‐temperature calcination tends to result in larger crystallites, phase separation, and carbon reduction. Herein, using the NaCl self‐assembly template method, by introducing a high‐pressure field in the calcination process, the atom diffusion and phase separation are inhibited for the general formation of HECs, and the HEC aggregation is inhibited for obtaining ultrafine size. The general preparation of ultrafine‐sized (<10 nm) HECs (nitrides, oxides, sulfides, and phosphates) anchored on porous carbon composites is realized. They are demonstrated by combining advanced characterization technologies with theoretical computations. Ultrafine‐sized high entropy sulfides‐MnFeCoCuSnMo/porous carbon (HES‐MnFeCoCuSnMo/PC) as representative anodes exhibit excellent sodium‐ion storage kinetics and capacities (a high rating capacity of 278 mAh g−1 at 10 A g−1 for full cell and a high cycling capacity of 281 mAh g−1 at 20 A g−1 after 6000 cycles for half cell) due to the combining advantages of high entropy effect, ultrafine size, and PC incorporation. Our work provides a new opportunity for designing and fabricating ultrafine‐sized HECs. [ABSTRACT FROM AUTHOR]

Aqueous Zn‐based batteries have emerged as compelling candidates for grid‐scale energy storage, owing to their intrinsic safety, remarkable theoretical energy density and cost‐effectiveness. Nonetheless, the dendrite formation, side reactions, and corrosion on anode have overshadowed their practical applications. Herein, we present an in situ grown carbon network reinforcing Zn matrix anode prepared by powder metallurgy. This carbon network provides an uninterrupted internal electron transport pathway and optimize the surface electric field distribution, thereby enabling highly reversible Zn deposition. Consequently, symmetrical cells demonstrate impressive stability, running for over 880 h with a low voltage hysteresis (≈32 mV). Furthermore, this Zn matrix composite anode exhibits enhanced performance in both the aqueous Zn‐ion and the Zn‐air batteries. Notably, Zn//MnO2 cells display superior rate capabilities, while Zn‐air batteries deliver high power density and impressive Zn utilization rate (84.9 %). This work provides a new idea of powder metallurgy method for modified Zn anodes, showcasing potential for large‐scale production. [ABSTRACT FROM AUTHOR]

The catalyst‐reconstruction makes it challenging to clarify the practical active sites and unveil the actual reaction mechanism during the CO2 electroreduction reaction (CO2RR). However, currently the impact of the electrolyte microenvironment in which the electrolyte is in contact with the catalyst is overlooked and might induce a chemical evolution, thus confusing the reconstruction process and mechanism. In this work, the carbonate adsorption properties of metal oxides were investigated, and the mechanism of how the electrolyte carbonate affect the chemical evolution of catalysts were discussed. Notably, Bi2O3 with weak carbonate adsorption underwent a chemical reconstruction to form the Bi2O2CO3/Bi2O3 heterostructure. Furthermore, in situ and ex situ characterizations unveiled the formation mechanism of the heterostructure. The in situ formed Bi2O2CO3/Bi2O3 heterostructure with strong electron interaction served as the highly active structure for CO2RR, achieving a formate Faradaic efficiency of 98.1 % at −0.8 Vvs RHE. Theoretical calculations demonstrate that the significantly tuned p‐orbit electrons of the Bi sites in Bi2O2CO3/Bi2O3 optimized the adsorption of the intermediate and lowered the energy barrier for the formation of *OCHO. This work elucidates the mechanism of electrolyte microenvironment for affecting catalyst reconstruction, which contributes to the understanding of reconstruction process and clarification of the actual catalytic structure. [ABSTRACT FROM AUTHOR]

The water‐soluble salt‐template technique holds great promise for fabricating 3D porous materials. However, an equipment‐free and pore‐size controllable synthetic approach employing salt‐template precursors at room temperature has remained unexplored. Herein, we introduce a green room‐temperature antisolvent precipitation strategy for creating salt‐template self‐assembly precursors to universally produce 3D porous materials with controllable pore size. Through a combination of theoretical simulations and advanced characterization techniques, we unveil the antisolvent precipitation mechanism and provide guidelines for selecting raw materials and controlling the size of precipitated salt. Following the calcination and washing steps, we achieve large‐scale and universal production of 3D porous materials and the recycling of the salt templates and antisolvents. The optimized nitrogen‐doped 3D porous carbon (N‐3DPC) materials demonstrate distinctive structural benefits, facilitating a high capacity for potassium‐ion storage along with exceptional reversibility. This is further supported by in situ electrochemical impedance spectra, in situ Raman spectroscopy, and theoretical calculations. The anode shows a high rate capacity of 181 mAh g−1 at 4 A g−1 in the full cell. This study addresses the knowledge gap concerning the room‐temperature synthesis of salt‐template self‐assembly precursors for the large‐scale production of porous materials, thereby expanding their potential applications for electrochemical energy conversion and storage. [ABSTRACT FROM AUTHOR]

Rational design of Pt single‐atom catalysts provides a promising strategy to significantly improve the electrocatalytic activity for hydrogen evolution reaction. In this work, we presented a novel and efficient strategy for utilizing the low electron‐density region of substrate to effectively trap and confine high electron‐density metal atoms. The Pt single‐atom catalyst supported by nickel selenide with rich vacancies was prepared via a hydrothermal‐impregnation stepwise approach. Through experimental testation and DFT theoretical calculation, we confirm that Pt single atoms are well distributed at cationic vacancies of nickel selenide with loading amount of 3.2 wt. %. Moreover, the atomic Pt combined with the high electronegative Se to form Pt−Se bond as a "bridge" between single atoms and substrate for fast electron translation. This novel catalyst shows an extremely low overpotential of 45 mV at 10 mA cm−2 and an excellent stability over 120 h. Furthermore, the nickel selenide supported Pt SACs exhibits long‐term stability for practical application, which maintains a high current density of 390 mA cm−2 over 80 h with a retention of 99 %. This work points a promising direction for designing single atoms catalysts with high catalytic activity and stability for advanced green energy conversion technologies. [ABSTRACT FROM AUTHOR]

The sluggish kinetics and mutual interference of oxygen evolution and reduction reactions in the air electrode resulted in large charge/discharge overpotential and low energy efficiency of Zn‐air batteries. In this work, we designed a breathing air‐electrode configuration in the battery using P‐type Ca3Co4O9 and N‐type CaMnO3 as charge and discharge thermoelectrocatalysts, respectively. The Seebeck voltages generated from thermoelectric effect of Ca3Co4O9 and CaMnO3 synergistically compensated the charge and discharge overpotentials. The carrier migration and accumulation on the cold surface of Ca3Co4O9 and CaMnO3 optimized the electronic structure of metallic sites and thus enhanced their intrinsic catalytic activity. The oxygen evolution and reduction overpotentials were enhanced by 101 and 90 mV, respectively, at temperature gradient of 200 °C. The breathing Zn‐air battery displayed a remarkable energy efficiency of 68.1 %. This work provides an efficient avenue towards utilizing waste heat for improving the energy efficiency of Zn‐air battery. [ABSTRACT FROM AUTHOR]

The advent of wearable electronics has strongly stimulated advanced research into the exploration of flexible zinc−air batteries (ZABs) with high theoretical energy density, high inherent safety, and low cost. However, the half‐open battery structure and the high concentration of alkaline aqueous environment pose great challenges on the electrolyte retention capability and the zinc anode stability. Herein, a starch‐based superabsorbent hydrogel polymer electrolyte (SSHPE) with high ionic conductivity, electrolyte absorption and retention capabilities, strong alkaline resistance and high zinc anode stability has been designed and applied in ZABs. Experimental and calculational analyses probe into the root of the superiority of SSHPEs, confirming the significance of the carboxyl functional groups along their polymer chains. These features endow the as‐fabricated ZAB a long cycle life of 300 h, much longer than that with commonly used poly(vinyl alcohol)‐based electrolyte. [ABSTRACT FROM AUTHOR]

It is vitally important to develop highly active, robust and low‐cost transition metal‐based electrocatalysts for overall water splitting in neutral solution especially at large current density. In this work, amorphous Mo‐doped NiS0.5Se0.5 nanosheets@crystalline NiS0.5Se0.5 nanorods (Am−Mo−NiS0.5Se0.5) was synthesized using a facil one‐step strategy. In phosphate buffer saline solution, the Am−Mo−NiS0.5Se0.5 shows tiny overpotentials of 48 and 209 mV for hydrogen evolution reaction (HER), 238 and 514 mV for oxygen evolution reaction (OER) at 10 and 1000 mA cm−2, respectively. Moreover, Am−Mo−NiS0.5Se0.5 delivers excellent stability for at least 300 h without obvious degradation. Theoretical calculations revealed that the Ni sites in the defect‐rich amorphous structure of Am−Mo−NiS0.5Se0.5 owns higher electron state density and strengthened the binding energy of H2O, which will optimize H adsorption/desorption energy barriers and reduce the adsorption energy of OER determining step. [ABSTRACT FROM AUTHOR]

Tuning the electronic states near the Fermi level can effectively facilitate the reaction kinetics. However, elucidating the role of a specific electronic state of metal oxide in simultaneously regulating the CO2 electroreduction reaction (CO2RR) and competing hydrogen evolution reaction (HER) is still rare, making it difficult to accurately predict the practical CO2RR performance. Herein, replacing the Zn site by heteroatoms with different outer electrons (Mo and Cu) is found to tune both occupied and unoccupied orbitals near the Fermi level of ZnO. Moreover, the different electronic states significantly modulate both CO2RR and HER activity with a totally inverse trend, thus dramatically tuning the practical CO2RR performance. In parallel, the correlation between electronic states, reaction free energies and practical activity is demonstrated. This work provides a possibility for engineering efficient CO2RR eletrocatalysts through tunable composition and electronic structures. [ABSTRACT FROM AUTHOR]

Cu2O is a typical photoelectrocatalyst for sustainable hydrogen production, while the fast charge recombination hinders its further development. Herein, Ni2+ cations have been doped into a Cu2O lattice (named as Ni‐Cu2O) by a simple hydrothermal method and act as electron traps. Theoretical results predict that the Ni dopants produce an acceptor impurity level and lower the energy barrier of hydrogen evolution. Photoelectrochemical (PEC) measurements demonstrate that Ni‐Cu2O exhibits a photocurrent density of 0.83 mA cm−2, which is 1.34 times higher than that of Cu2O. And the photostability has been enhanced by 7.81 times. Moreover, characterizations confirm the enhanced light‐harvesting, facilitated charge separation and transfer, prolonged charge lifetime, and increased carrier concentration of Ni‐Cu2O. This work provides deep insight into how acceptor‐doping modifies the electronic structure and optimizes the PEC process. [ABSTRACT FROM AUTHOR]

The fabrication of metal‐supported hybrid structures with enhanced properties typically requires external energy input, such as pyrolysis, photolysis, and electrodeposition. In this study, silver‐nanoparticle‐decorated transition‐metal hydroxide (TMH) composites were synthesized by an approach based on a spontaneous redox reaction (SRR) at room temperature. The SRR between silver ions and TMH provides a simple and facile route to establish effective and stable heterostructures that can enhance the oxygen evolution reaction (OER) activity. Ag@Co(OH)x grown on carbon cloth exhibits outstanding OER activity and durability, even superior to IrO2 and many previously reported OER electrocatalysts. Experimental and theoretical analysis demonstrates that the strong electronic interaction between Ag and Co(OH)2 activates the silver clusters as catalytically OER active sites, effectively optimizing the binding energies with reacted intermediates and facilitating the OER kinetics. [ABSTRACT FROM AUTHOR]

Developing superior electrocatalysts for formic acid oxidation (FAO) is the most crucial step in commercializing direct formic acid fuel cells. Herein, we electrodeposited palladium membranes with periodically ordered mesoporosity obtained by asymmetrically replicating the bicontinuous cubic phase structure of a lyotropic liquid‐crystal template. The Pd membrane with the largest periodicity and highest degree of order delivered up to 90.5 m2 g−1 of electrochemical active surface area and 3.34 A mg−1 electrocatalysis capability towards FAO, 3.8 and 7.8 times the values of the commercial Pd/C catalyst, respectively. By controlling the temperature and potential of the electrodeposition procedure, the periodicity area and order degree of the mesoporosity are highly tunable. These Pd membranes gave prototype formic acid fueled cells with 4.3 and 2.4 times the maximum current and power density of the commercial Pd/C catalyst. [ABSTRACT FROM AUTHOR]

The size effect of transition‐metal nanoparticles on electrocatalytic performance remains ambiguous especially when decreasing the size to the atomic level. Herein, we report the spatial isolation of cobalt species on the atomic scale, which was achieved by tuning the zinc dopant content in predesigned bimetallic Zn/Co zeolitic imidazole frameworks (ZnCo‐ZIFs), and led to the synthesis of nanoparticles, atomic clusters, and single atoms of Co catalysts on N‐doped porous carbon. This synthetic strategy allowed an investigation of the size effect on electrochemical behavior from nanometer to Ångström dimensions. Single‐atom Co catalysts showed superior bifunctional ORR/OER activity, durability, and reversibility in Zn–air batteries compared with the other derivatives and noble‐metal Pt/C+RuO2, which was attributed to the high reactivity and stability of isolated single Co atoms. Our findings open up a new avenue to regulate the metal particle size and catalytic performance of MOF derivatives. The spatial isolation of cobalt species on the atomic scale was achieved by tuning the zinc dopant content in predesigned bimetallic Zn/Co zeolitic imidazole frameworks (ZnCo‐ZIFs), and enabled the generation of nanoparticles, atomic clusters, and single atoms of cobalt on N‐doped porous carbon. The single‐atom Co catalysts showed superior bifunctional ORR/OER activity, durability, and reversibility in Zn–air batteries. [ABSTRACT FROM AUTHOR]