Search

Metal‐organic frameworks (MOFs) that exhibit dynamic phase‐transition behavior under external stimuli could have great potential in adsorptive separations. Here we report on a zinc‐based microporous MOF (JNU‐80) and its reversible transformation between two crystalline phases: large pore (JNU‐80‐LP) and narrow pore (JNU‐80‐NP). Specifically, JNU‐80‐LP can undergo a dehydration‐induced cluster consolidation under heat treatment, resulting in JNU‐80‐NP with a reduced channel that allows exclusion of di‐branched hexane isomers while high adsorption of linear and mono‐branched hexane isomers. We further demonstrate the fabrication of MOF‐polymer composite (JNU‐80‐NP‐block) and its application in the purification of di‐branched isomers from liquid‐phase hexane mixtures (98 % di‐branched) at room temperature, affording the di‐branched hexane isomers with 99.5 % purity and close to 90 % recovery rate over ten cycles. This work illustrates an interesting dehydration‐induced cluster consolidation in MOF structure and the ensuing channel shrinkage for sieving di‐branched hexane isomers, which may have important implications for the development of MOFs with dynamic behavior and their potential applications in non‐thermal driven separation technologies. [ABSTRACT FROM AUTHOR]

The development of energy‐saving technology for the efficient separation of olefin and paraffin is highly important for the chemical industry. Herein, we report a self‐assembled Fe4L6 capsule containing a hydrophobic cavity, which can be used to encapsulate and separate propylene/propane. The successful encapsulation of propylene and propane by the Fe4L6 cage in a water solution was documented by NMR spectroscopy. The binding constants K for the Fe4L6 cage toward propylene and propane were determined to be (5.0±0.1)×103 M−1 and (2.1±0.7)×104 M−1 in D2O at 25 °C, respectively. Experiments and theoretical studies revealed that the cage exhibited multiple weak interactions with propylene and propane. The polymer‐grade propylene (>99.5 %) can be obtained from a mixture of propylene and propane by using the Fe4L6 cage as a separation material in a U‐shaped glass tube. This work provides a new strategy for the separation of olefin/paraffin. [ABSTRACT FROM AUTHOR]

Post‐synthetic modification (PSM) is an effective approach for the tailored functionalization of metal‐organic architectures, but its generalizability remains challenging. Herein we report a general covalent PSM strategy to functionalize PdnL2n metal‐organic cages (MOCs, n=2, 12) through an efficient Diels–Alder cycloaddition between peripheral anthracene substituents and various functional motifs bearing a maleimide group. As expected, the solubility of functionalized Pd12L24 in common solvents can be greatly improved. Interestingly, concentration‐dependent circular dichroism and aggregation‐induced emission are achieved with chiral binaphthol (BINOL)‐ and tetraphenylethylene‐modified Pd12L24, respectively. Furthermore, Pd12L24 can be introduced with two different functional groups (e.g. chiral BINOL and achiral pyrene) through a step‐by‐step PSM route to obtain chirality‐induced circularly polarized luminescence. Moreover, similar results are readily observed with a smaller Pd2L4 system. [ABSTRACT FROM AUTHOR]

Voltage decay and capacity fading are the main challenges for the commercialization of Li‐rich Mn‐based layered oxides (LLOs). Now, a three‐in‐one surface treatment is designed via the pyrolysis of urea to improve the voltage and capacity stability of Li1.2Mn0.6Ni0.2O2 (LMNO), by which oxygen vacancies, spinel phase integration, and N‐doped carbon nanolayers are synchronously built on the surface of LMNO microspheres. Oxygen vacancies and spinel phase integration suppress irreversible O2 release and help lithium ion diffusion, while N‐doped carbon nanolayer mitigates the corrosion of electrolyte with excellent conductivity. The electrochemical performance of LMNO after the treatment improves significantly; the capacity retention rate after 500 cycles at 1 C is still as high as 89.9 % with a very small voltage fading rate of 1.09 mV cycle−1. This three‐in‐one surface treatment strategy can suppress the voltage decay and capacity fading of LLOs. [ABSTRACT FROM AUTHOR]