Search

Objective: To determine whether the condylar rotation is affected by asymmetric setback in patients undergoing sagittal split ramus osteotomy. Materials and Methods: Thirty patients who underwent bilateral sagittal split ramus osteotomy setback surgery were divided into the two groups, symmetric setback and asymmetric setback, according to the right/left difference of setback amount (<2.0, ≥2.0 mm). Condylar long axis changes were evaluated using the three-dimensional superimposition of before and immediately after surgery cone-beam computed tomography volume images. Evaluations were performed separately in lesser setback and greater setback side in patients undergoing asymmetric setback, whereas both side condyles were evaluated together in patients undergoing symmetric setback. Condylar axis changes on axial view were correlated with setback amount or right/left setback difference using Pearson correlation analysis. Results: In general, the condylar axis change occurred in a pattern of inward rotation. The condyles in patients undergoing symmetric setback showed 3.4° rotation in average. In case of asymmetric setback, the lesser setback side showed larger value (4.3°) than the greater setback side (2.3°) with a statistical significance. In the correlation analysis, setback amount showed no significant correlation with the condylar axis changes in both groups. However, correlation with right/left setback difference showed a positive correlation in lesser setback side of patients undergoing asymmetric setback. Conclusion: The findings of this study indicate that large amount of setback alone does not contribute to the change in condylar long axis, but asymmetric setback might cause a change in condylar long axis, particularly on the lesser setback side. [ABSTRACT FROM AUTHOR]

Objective: To compare patients' perceptions of fixed and removable appliance therapy for correction of anterior crossbite in the mixed dentition, with special reference to perceived pain, discomfort, and impairment of jaw function. Materials and Methods: Sixty-two patients with anterior crossbite and functional shift were recruited consecutively and randomized for treatment with fixed appliances (brackets and archwires) or removable appliances (acrylic plates and protruding springs). A questionnaire, previously found to be valid and reliable, was used for evaluation at the following time points: before appliance insertion, on the evening of the day of insertion, every day/evening for 7 days after insertion, and at the first and second scheduled appointments (after 4 and 8 weeks, respectively). Results: Pain and discomfort intensity were higher for the first 3 days for the fixed appliance. Pain and discomfort scores overall peaked on day 2. Adverse effects on school and leisure activities were reported more frequently in the removable than in the fixed appliance group. The fixed appliance group reported more difficulty eating different kinds of hard and soft food, while the removable appliance group experienced more speech difficulties. No significant intergroup difference was found for self-estimated disturbance of appearance between the appliances. Conclusions: The general levels of pain and discomfort were low to moderate in both groups. There were some statistically significant differences between the groups, but these were only minor and with minor clinical relevance. As both appliances were generally well accepted by the patients, either fixed or removable appliance therapy can be recommended. [ABSTRACT FROM AUTHOR]

Objective: To evaluate condylar and ramal vertical asymmetry in adult orthodontic patients with different vertical growth patterns and a clinically normal sagittal skeletal pattern using cone-beam computed tomography (CBCT). Materials and Methods: The study sample consisted of 101 adult orthodontic patients (48 men and 53 women) divided into three groups according to their vertical growth patterns: high- (33 patients; mean age, 25.06 ± 6.05 years), low- (34 patients; mean age, 24.88 ± 5.22 years), and normal-angle (34 patients; mean age, 24.14 ± 4.26 years) groups. Condylar, ramal, condylar plus ramal height, and index measurements were performed using CBCT images and analyzed using one-way analysis of variance and post hoc Tukey tests. Results: There was no statistically significant difference in height measurements between right and left sides in each group, except a slight difference of approximately 0.5 mm for condylar height (CH) in the low-angle group (P < .05). No statistically significant gender differences were found for the values (P > .05). In the high-angle group, the ramal height (RH) and condylar plus ramal height (CH + RH) on both sides were found to be less than those of the low- (P < .001) and normal-angle groups (P < .017 and P > .017, respectively), and the asymmetry index values were slightly higher than those of the low- and normal-angle groups (P > .05). Conclusions: The high-angle group showed statistically significantly smaller values of RH and CH + RH on both sides and statistically insignificantly higher asymmetry index values than the low- and normal-angle groups. [ABSTRACT FROM AUTHOR]

Adequate intrusion and torque control of the retroclined maxillary Incisors are critical for the treatment of Class II division 2 (div2) malocclusion. In addition, anterior retraction via lingual root movement can be challenging. This case report demonstrates a combined use of miniscrews and continuous arch with additional torque for intrusion, retraction, and torque control of maxillary incisors in the Class II div2 with gummy smile. A 20-year-old woman presented with multiple issues, including impacted canine, lip protrusion, prolonged retained mandibular primary molar, and two missing maxillary premolars. In order to improve her facial profile and eliminate the need for prosthetic work, the mandibular primary molar and contralateral premolar were extracted. Two miniscrews were placed at the maxillary buccal alveolar bone to apply the posterosuperior force for retraction of anterior teeth, with additional labial crown torque on the arch wire. The results were the Intrusion (4 mm) and lingual root movement (17°) of the maxillary incisors without anchorage loss of maxillary molars, flattening of the Curve of Spee, and Class I molar relation that were maintained after 50 months of retention period. The combined use of miniscrews and continuous arch could be a reliable and effective treatment modality for torque control and intrusion of retroclined maxillary Incisors in the Class II div2 patient. [ABSTRACT FROM AUTHOR]

Objective: To assess the morphology and dimensions of mandibular symphysis (MS) in different anteroposterior jaw relationships and to investigate whether craniofacial parameters have any correlation with its shape and/or dimensions. Materials and Methods: Lateral cephalograms of subjects with Class I, Class II, and Class III skeletal relationships were traced. Several craniofacial and MS parameters were measured. MS parameters were compared between the three groups using analysis of variance and were correlated with the craniofacial parameters using the Pearson correlation coefficient. Results: Larger angle of concavity of the chin, more inclination of the alveolar bone toward the mandibular plane, and larger MS dimensions and area (P < .001) were found with a Class III skeletal relationship compared to Class I and Class II relationships. The Pearson correlation coefficient between Id-Me and AFH was r = 0.83 and between Id-Me and LAFH it was r = 0.81. Conclusions: The dimensions and configuration of MS in the Class III relationship were different than those in Class I and Class II relationships; the alveolar part of MS compensated for the skeletal relationship in the Class III pattern. MS dimensions were strongly correlated to anterior facial dimensions. [ABSTRACT FROM AUTHOR]

Objective: To investigate the existence of genetic influences on the incidence of mandibular prognathism (MP) in Korean Class III patients. Materials and Methods: The probands consisted of 100 Class III patients with MP (51 men and 49 women; mean age, 22.1 ± 5.2 years; SNA, 81.2° ± 3.2°; SNB, 84.1° ± 3.9°) who underwent orthognathic surgery. Using three-generation pedigree charts, questionnaires, and clinical examinations, general information and information regarding MP for a total of 3777 relatives of the probands (1911 men and 1866 women) was ascertained. Familial correlations of MP between possible pairs in the pedigree were estimated. Heritability (h²) of MP under various models was estimated. Segregation analysis was conducted under the assumption of the nonpolygenic multivariate logistic model and finite polygenic mixed model. One-, two-, and three-susceptibility-type models were evaluated. Results: Among 3777 relatives, 199 (97 men and 102 women) were affected with MP (5.3%). Correlation coefficients of MP incidence in full siblings and in parent-offspring were .2003 and .2036, respectively (all P < .001 ). The h² of MP was estimated as 21.5% after adjusting for sex and founder effects. Two- and three-susceptibility-type models showed that the general model fit better than the other models. MP incidence did not have a major gene transmission model and was influenced by numerous minor effect genes and their additive effects. Conclusion: These results suggest that the inherited susceptibility to MP in Korean Class III patients might be due to the summation of minor effects from a variety of different genes and/or influence of environmental factors, rather than Mendelian transmission of major genes. [ABSTRACT FROM AUTHOR]

Objective: To analyze the long-term skeletal and dentoalveolar effects and to evaluate treatment timing of Class II treatment with functional appliances followed by fixed appliances. Materials and Methods: A group of 40 patients (22 females and 18 males) with Class II malocclusion consecutively treated either with a Bionator or an Activator followed by fixed appliances was compared with a control group of 20 subjects (9 females and 11 males) with untreated Class II malocclusion. Lateral cephalograms were available at the start of treatment (mean age 10 years), end of treatment with functional appliances (mean age 12 years), and longterm observation (mean age 18.6 years). The treated sample also was divided into two groups according to skeletal maturity. The early-treatment group was composed of 20 subjects (12 females and 8 males) treated before puberty, while the late-treatment group included 20 subjects (10 females and 10 males) treated at puberty. Statistical comparisons were performed with analysis of variance followed by Tukey's post hoc tests. Results: Significant long-term mandibular changes (Co-Gn) in the treated group (3.6 mm over the controls) were associated with improvements in the skeletal sagittal intermaxillary relationship, overjet, and molar relationship (-3.0-3.5 mm). Treatment during the pubertal peak was able to produce significantly greater increases in total mandibular length (4.3 mm) and mandibular ramus height (3.1 mm) associated with a significant advancement of the bony chin (3.9 mm) when compared with treatment before puberty. Conclusion: Treatment of Class II malocclusion with functional appliances appears to be more effective at puberty. (Angle Orthod. 2013;83:334-340.) [ABSTRACT FROM AUTHOR]

Objective: To test the hypothesis that sagittal mandibular development has no effects on the dimensions of the awake pharyngeal airway passage. Materials and Methods: Ninety-one subjects (age 15-25 years) with a normal vertical growth pattern of the mandible, normally positioned maxilla, and various sagittal mandibular developments were divided into three groups based on the sagittal mandibular development. Group I included 37 subjects who had a normally positioned mandible (76° # angle between 'S,' 'N,' and 'B'; it represents the antero-posterior position of the maxilla in relation to the anterior cranial base [SNB] # 82°), Group II included 31 subjects in whom the mandible was retrognathic (SNB < 76°), and Group III included 23 subjects in whom the mandible was prognathic (SNB . 82°) in relation to the anterior cranial base. Lateral cephalograms were traced manually to evaluate the pharyngeal airway passage. Results: The length of the soft palate was significantly smaller in mandibular prognathism subjects than in subjects with mandibular retrognathism (P < .01). The thickness of the soft palate was significantly greater among subjects with mandibular prognathism than in subjects with normal (P < .01) and retrognathic (P < .001) mandibular development. The sagittal mandibular development had no effect on the dimensions of the nasopharyngeal and hypopharyngeal airway passage. The depth of the oropharynx was comparable among the subjects with normal and retrognathic mandibles but was greater (P < .001) among subjects with mandibular prognathism. Conclusions: The hypothesis is rejected. Sagittal mandibular development had significant effects on the dimensions of the awake pharyngeal airway passage. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the dental and skeletal effects of chin cup using two different force magnitudes in the management of Class III malocclusion cases. Materials and Methods: Fifty growing patients (26 males and 24 females) with skeletal Class III and mandibular prognathism were selected. The patients were divided into three groups. Patients in group 1 (n ?=? 20) were treated with a chin cup and occlusal bite plane using 600 g of force per side. Patients in group 2 (n ?=? 20) were subjected to the same treatment as in group 1 but using 300 g of force per side. In group 3 (n ?=? 10) no treatment was performed. For all patients, lateral cephalograms were taken before treatment and after 1 year. Cephalograms were traced and analyzed. The collected data were analyzed statistically using one-way analysis of variance and the Tukey test. Results: In the treatment groups, the SNB angle and ramus height decreased significantly. The ANB angle, Wits appraisal, anterior facial height, mandibular plane angle, and retroclination of the mandibular incisors were significantly increased in comparison to the control group. Utilization of either force showed no significant differences, except that the reduction in the ramus height was significantly greater with the use of higher force. Conclusions: The use of a chin cup improved the maxillomandibular base relationship in growing patients with Class III malocclusion but with little skeletal effect. The utilization of either force had the same effects, except that the higher force had a more pronounced effect in reduction of ramus height. [ABSTRACT FROM AUTHOR]

Objective: To test the hypothesis that there is no difference in the stability of the hard and soft tissue changes following a surgical mandibular setback using a sagittal split ramus osteotomy or an intraoral vertical ramus osteotomy. Materials and Methods: The samples consisted of 45 female patients with mandibular prognathism, who were divided into two groups. Twenty-three underwent a sagittal split ramus osteotomy (SSRO) with rigid fixation by titanium mini-screws and maxillomandibular fixation (MMF) for 14.0 ± 0.7 days. Twenty-two underwent intraoral vertical ramus osteotomy (IVRO) without rigid fixation, and MMF was released 21.5 ± 3.3 days after surgery. Data were collected from standardized cephalometric radiographs taken at the start of preoperative orthodontic treatment (T1), immediately after surgery (MMF, T2), and the completion of postoperative treatment (T3). Angular measurements were compared on each of T1, T2, and T3. Results: There were no significant differences in the pretreatment hard and soft tissue morphology between the SSRO and IVRO. However, when fixation was released, the mandible was posteriorly positioned in the IVRO group. In the soft tissue profile, the mental region was located backward in the IVRO group at postoperative stage (T3). Conclusions: The hypothesis is rejected. The soft tissue profile of the IVRO group especially showed a retromandibular position after postoperative treatment in comparison with the SSRO group. This tendency of the IVRO group would contribute to the database for treatment planning and prediction. [ABSTRACT FROM AUTHOR]

Objective: To investigate the laterality of the normal asymmetry of the human face, examining differences in laterality in relation to sex, growth stage, and skeletal classification. Materials and Methods: A total of 1800 Japanese subjects (651 males and 1149 females; mean age, 15 years 3 months; range, 4 years 2 months to 59 years 11 months) were selected. Individuals in the sample were categorized according to sex, one of three growth stages, and one of three skeletal patterns. Differences in length between distances from the points at which ear rods were inserted to the facial midline and the perpendicular distance from the soft-tissue menton to the facial midline were measured on a frontal facial photograph. Subjects with a discrepancy of more than 3 standard deviations of the measurement error were categorized as having left- or right-sided laterality. Results: Of subjects with facial asymmetry, 79.7% had a wider right hemiface, and 79.3% of those with chin deviation had left-sided laterality. These tendencies were independent of sex, age, or skeletal jaw relationships. In this regard, during pubertal growth, the proportion of subjects with wider right hemiface decreased (P < .0001), whereas the proportion of those with a wider left hemiface increased (P < .01), despite a consistent tendency for right-sided dominance. Conclusion: These results suggest that laterality in the normal asymmetry of the face, which is consistently found in humans, is likely to be a hereditary rather than an acquired trait. [ABSTRACT FROM AUTHOR]

Increases in mandibular width by symphyseal distraction osteogenesis have recently been shown to be an acceptable and stable treatment option for transverse deficiencies. This case report presents the application of symphyseal distraction osteogenesis for increasing mandibular width using a bone-supported distractor as part of the orthodontic treatment of a 14-year-old male with a tapered shaped mandible and severe mandibular anterior crowding. [ABSTRACT FROM AUTHOR]

Objective: The objective of this study is to characterize the convergences of dentofacial form of skeletal Class III malocclusion in individuals to test the fundamental hypothesis that there are distinct subtypes of Class III malocclusion. Materials and Methods: A detailed phenotypic characterization was performed on a retrospective cohort of 309 subjects using cluster and principal component analyses on 67 cephalometric variables. Results: The results indicated that there are five clusters representing distinct subphenotypes. The principal component analysis suggested that the groupings of variables reflect anteroposterior and vertical dimensions rather than specific craniofacial structures. This may ultimately suggest that different genes are involved in controlling dimension vs structures. Conclusions: Our phenotypic dissection of Class III malocclusion established distinct subtypes in a large sample of patients and will ultimately provide the basis for future familial studies to identify a causative gene. [ABSTRACT FROM AUTHOR]

This study examines cephalometric differences and sex differences in the long-term outcome of chin cup treatments of Class III subjects with two facial patterns. Seventeen nondolichofacial and 16 dolichofacial Class Ill male patients and 16 nondolichofacial and 16 dolichofacial female patients were treated by either bicuspid extraction or nonextraction. Rapid palatal expansion without maxillary protraction was performed on 11 male cases and 15 female cases. The borderline between the two groups was drawn either at 39° mandibular plane angle or 132° (male subjects) or 130° (female subjects) gonial angle. Dolichofacial subjects were treated with either an occipital or a high-pull chin cup force during the first two years, followed by high-pull force during night-time wear for the subsequent three years. All treated cases showed excellent results in the retention records with acceptable posterior occlusion as well as excellent skeletal and soft-tissue profiles. In addition, patient compliance was excellent. The treatment outcomes of the two groups showed significant improvement of the skeletal Class III malocclusion. This study indicated that the treatment period and wear time of the chin cup appliance in nondolichofacial (mostly mesiofacial pattern) patients could be shorter than those of dolichofacial patients. Although all subjects showed significant improvement in the Class III malocclusion, the treatment outcome in the two groups maintained the original characteristic skeletal morphology at retention. [ABSTRACT FROM AUTHOR]

The computer-assisted digital cephalometric analysis system (CADCAS) may reduce the time required for cephalometric analysis, especially for taking measurements. Aimed at estimating the time saved by using CADCAS, we measured the time needed by a clinician to perform the analysis in a traditional manner. We also sought to verify the accuracy achieved by traditional cephalometric analysis by exploring the disagreement between manual measurements and those generated by CADCAS. Our results revealed that, on average, even an experienced clinician needed more than 25 minutes to perform an entire cephalometric analysis using a traditional method, with more than 15 minutes of this needed just for taking measurements. Disagreements between measurements by traditional method and those by CADCAS were most frequently noted in the measurement value of cephalometric items reflecting the severity of a jaw discrepancy by the "sign" reflecting the anteroposterior relationship. After excluding the measurements with obvious error, the measurement differences between traditional method and CADCAS were not statistically significant in 23 of a total of 26 cephalometric items. In conclusion, the CADCAS can reduce the time needed for cephalometric analysis and can help reduce the human errors introduced during the manual-measuring procedure in the traditional cephalometric analysis. [ABSTRACT FROM AUTHOR]

Many authors have studied the correlation of cranial base flexure and the degree of mandibular prognathism and classification of malocclusion. This indicates that the cranial base flexure may or may not have an effect on the degree of mandibular prognathism and classification of malocclusion. This study evaluates the correlation of the pretreatment cranial base angle and its component parts to other dental and skeletal cephalometric variables as well as treatment time. The sample consisted of 99 Angle Class II and Class I malocclusions treated in the mixed dentition with cervical headgear and incisor bite plane. Thirty of the patients required full appliance treatment. Treatment duration averaged 4.3 years (SD, 1.5 years). Only the starting cephalograms were used to acquire linear, proportional, and angular cranial base dimensions using Ba-S-N (total cranial base), Ba-S/FH (posterior cranial base), and SN/FH (anterior cranial base). Pearson product moment correlation coefficients were computed and used to assess the association of the following skeletal and dental variables: N-Pg/FH, MP/FH, Y-axis/FH, U1/L1, L1/MP, A-NPg mm, A-Perp, B-Perp, and treatment time with the cranial base measurements. Significance was determined only when the confidence level was P < .05. Although there was no significant correlation of BaSN or SN/FH with NPg, the angular BaS/FH, linear BaS mm, and proportional length of BaS %BaN were all statistically negatively correlated to the facial angle. This indicates that the posterior cranial base leg is the controlling factor in relating the cranial base to mandibular prognathism. [ABSTRACT FROM AUTHOR]

A male (30 years five months) who complained of mandibular prominence and masticatory dysfunction was diagnosed as a mandibular prognathic with acromegaly after cephalometric and endocrine examinations. The level of growth hormone (GH) subsequent to a transsphenoidal hypophysectomy had been controlled by medicines for about five years. Surgical orthodontic correction improved his occlusion and profile, but magnetic resonance imaging detected a recurrent adenoma in the cranial base during the retention period. The recurrence resulted in slight prognathic changes of the patient with a high level of GH. This is a case report of the treatment of an acromegalic patient discussing growth considerations that could influence the orthodontic treatment plan and long-term stability. [ABSTRACT FROM AUTHOR]

A number of authors have suggested that there is a relationship between the degree of cranial base flexion and type of malocclusion, with the angle becoming increasingly obtuse from class III through class I to class II subjects. A retrospective cephalometric study was carried out to examine the contribution of cranial base angle in the four groups of malocclusion as classified by the British Standards Institution. Results showed that the cranial base flexure does not play a pivotal role in determining malocclusion. Jaw size, however, was significantly different between the main classes of malocclusion. The maxilla was found to be longer in class II subjects and the mandible longer in class III subjects. [ABSTRACT FROM AUTHOR]

Surgically assisted rapid maxillary expansion is proposed as an efficient approach for adult patients with transverse maxillary deficiency. This article reports the treatment of an 18-year, seven-month old male patient with an anterior open bite and a severely narrowed upper dental arch. A posterior crossbite was present on both sides. For the correction of the posterior crossbite, a lateral maxillary expansion of more than 8 mm was required. A surgically assisted rapid maxillary expansion with Le Fort I corticotomy and mandibular setback with a sagittal splitting ramus osteotomy were determined as the treatment plan. The total treatment time was 24 months including five months of post-surgical observation. After the treatment, an acceptable occlusion was achieved with a Class I molar relationship. The amount of actual maxillary expansion was 6.3 mm at the canines and 9.7 mm at the first molars. The relapse of the expansion was 0.9 mm and 0.1 mm at the corresponding regions two years after the surgically assisted maxillary expansion. It is emphasized that surgically assisted rapid maxillary expansion is a secure and efficient approach for achieving a desirable lateral maxillary expansion with stability in adult patients demonstrating transverse maxillary deficiency. Furthermore, it is suggested that longterm observation of the maxillary arch width after retention is of a great importance for the maintenance of the acceptable treatment outcome. [ABSTRACT FROM AUTHOR]

Skeletal changes greater than those observed in untreated adults have been noted beyond 1 year post-surgery in adult patients who had surgical correction of a long face deformity. The stability of skeletal landmarks and dental relationships from 1 to >3 years post-surgery was examined in 28 patients who had undergone surgery of the maxilla only, and in 26 patients who had undergone 2-jaw surgery to correct >2 mm anterior open bite. Although the average changes in almost all landmark positions and skeletal dimensions were less than 1 mm, point B moved down >2 mm and face height increased >2 mm in one-third of the maxilla-only group and in 40% of the 2-jaw group (>4 mm in 10% and 22% respectively). Overbite decreased 2-4 mm in only 7% of the maxilla-only and 12% of the 2 groups, with no changes >4 mm, because in three-fourths of the patients with an increase in anterior face height, further eruption of the incisors maintained the overbite relationship. In the maxilla-only group, mandibular length (Co-Pg) showed >2 mm long-term change in 45% of the patients, two-thirds of whom showed an increase rather than a decrease in length. In the 2-jaw group, no patients showed a decrease in Co-Pg length and one-third had an increase. For both groups, changes in overjet were smaller and less frequent than changes in mandibular length. [ABSTRACT FROM AUTHOR]

Genetic model-fitting was used to determine the heritability of anteroposterior and vertical facial proportions in twins. Lateral headplates of 33 monozygotic and 46 dizygotic twins, none of whom had undergone orthodontic treatment, were used. Five proportions, based on four vertical and five horizontal measurements, were assessed: lower facial height, anterior- to posterior-facial height, total facial height to face depth, sella-A-point to sella-B-point, and sella-upper incisal edge to sella-lower incisal edge. Reproducibility was high for all variables. Model-fitting indicated that all the facial proportions were controlled by additive genes and the specific environment. The genetic component was 71% for upper- to lower-facial height, 66% for anterior- to posterior-facial height, 62% for total facial height, and 66% for sella-A-point to sella-B-point and sella- upper incisal edge to sella-lower incisal edge. [ABSTRACT FROM AUTHOR]

Two groups of Class I females were followed from 6 to 18 years of age. At the initial evaluation, subjects in one group had normal sagittal jaw-base relationships, while those in the other group had moderate mesial relationships between the jaw bases. The purpose of this study was to compare craniofacial morphology and growth in these two groups. Subjects with mesial jaw-base relationships had mandibular skeletal protrusion due to a more forward positioning of the mandible relative to anterior cranial base. Other morphological group differences involved jaw-base relationships (but not jaw size). All the observed group differences were present at age 6; no new differences were observed later. Some differences stayed significant up to age 18, while others became less distinct with time. Incremental growth in the groups was comparable. Similar growth of the jaws apparently helped to maintain initial group differences in jaw-base relationships. [ABSTRACT FROM AUTHOR]

A correction to the article "Treatment effects produced by the Twin-block appliance vs the Forsus Fatigue Resistant Device in growing Class II patients" that was published in the 2015 issue is presented.

A response by Emad Hussein to a letter to the editor about their article "Bimaxillary Protrusion in the Palestinian Population" in a 2007 issue is presented.

A letter to the editor is presented in response to the article "Bimaxillary Protrusion in the Palestinian Population" in a 2007 issue.