Search

Heavy metals concentrations (Cd, Cu, Hg, Pb, Sn and Zn) have been determined monthly in surface sediments from the Mar Piccolo in Taranto (Ionian Sea, Southern Italy. a semi-enclosed marine basin very important from a mussel-culture point of view. In sediments, sulphides, percentage of organic carbon and redox potential were also determined to show possible correlations between metals levels and redox characteristics of marine sediments. Analytical results, elaborated by multivariate statistical techniques, confirm that sediments collected in the first inlet of Mar Piccolo, where shipbuilding activities are present, have a contamination level greater than those collected in the second inlet. For each metal, the geoaccumulation index (Igeo) has been calculated as criterion to evaluate both pollution levels and metals enrichment in examined sediments: Igeo values confirm that the first inlet is an moderately polluted area from Hg and Pb. In any case, high sulphide concentrations and negative values of redox potentials bring to a conclusion that metals are present in sediments, mainly as insoluble sulphides and then as not bioavailable compounds for filter feeders organisms such as mussels.

The following paper shows results of PM10 level and Cd, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn concentrations present in this fraction for filters collected in the urban area of Campi Salentina (Apulia, Southern Italy) in 2004 in order to inquire into air quality. PM10 and lead concentrations did not exceed the standard values sanctioned by Italian Legislature with average values equal to 36.54 +/- 14.57 microg x m(-3) and 9.19 +/- 5.24 ng x m(-3) respectively. Significant correlations have been found between the pairs Fe-Mn, Ni-V, Cr-Ni and Cd-Cr. This suggests that these metals have a similar pollution source probably due to metallurgical activity. Multivariate statistical analysis showed that it is possible to distinguish the PM10 samples collected in sampling periods with different meteorological conditions. Indeed, metals concentration increases for samples characterized by scarce rains or by winds prevailing from North or North-West and is reduced due to different meteorological conditions, although there are some exceptions.

Optimization of acid digestion method for mercury determination in marine biological samples (dolphin liver, fish and mussel tissues) using a closed vessel microwave sample preparation is presented. Five digestion procedures with different acid mixtures were investigated: the best results were obtained when the microwave-assisted digestion was based on sample dissolution with HNO3-H2SO4-K2Cr2O7 mixture. A comparison between microwave digestion and conventional reflux digestion shows there are considerable losses of mercury in the open digestion system. The microwave digestion method has been tested satisfactorily using two certified reference materials. Analytical results show a good agreement with certified values. The microwave digestion proved to be a reliable and rapid method for decomposition of biological samples in mercury determination.

Marine sediments from the Mar Grande and Gulf of Taranto were analysed for 17 parent PAHs, with molecular weight from 128 to 278 Daltons. The analyses were performed by gas chromatography coupled to mass spectrometry (GC-MS). Total PAHs content in sediments ranged from 464 to 12522 microg kg(-1) dry wt for Mar Grande and from 593 to 72275 microg kg(-1) dry wt for Gulf of Taranto. The analytical results were compared with the published results for other coastal areas in the Mediterranean Sea. PAHs levels in the Gulf of Taranto sediments were the highest in the Mediterranean sea, while PAHs concentrations in Mar Grande were higher than the ones reported in the Adriatic and Cretan Sea and with the same order of magnitude of the ones known for coastal areas of the Western and the Eastern Mediterranean Sea. PAHs concentration ratios were consistent with the main source of these compounds, in most areas, being pyrolysis. Based on the comparison of both the individual and the total PAHs concentrations with proposed sediment quality guidelines, the acute biological effects on the marine organisms were probable, especially for the Gulf of Taranto, in which almost all PAHs concentrations in sediments were higher than the guidelines limit values. The statistical analysis effected by HCA and PCA methods was used in order to classify sediment samples and to identify accumulation areas.

This paper shows the results of underground waters last monitoring in the province of Lecce (Apulia, Southern Italy). We carried out the physical-chemical characterization of the aquifers and their classification in accordance to limit values sanctioned by Italian legislation in force, by European directives and by FAO, in order to define their quality and to establish their possible use for drinkable and irrigation purposes. The attention has been focused on salinity evaluation and underground waters contamination phenomena, due to sea-water intrusion and to the use of fertilizers. Salinity and nitrates concentrations are high in a few wells. Iron and manganese concentrations are very high for almost every sample and this is due to corrosion phenomena of artesian wells metallic structure. For a better interpretation of data, multivariate statistical analysis has been used, in order to obtain the correlation among analytical results, soils hydro-geological properties and anthropic conditions.

This paper shows the results of a preliminary study of air monitoring in the province of Lecce (Apulia, Southern Italy). In particular, the attention has been focused on the determination of the PM-10 level and of the concentration of nine metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) present on the filters which were collected in two towns (Lecce and Campi Salentina) from 2002 until 2003. The metals have been chosen on the basis of their toxicity and of their possible use as chemical tracers. The results have proved that PM-10 values and metals concentrations did not show substantial difference between the two towns and that PM-10 level and lead concentration are below the limit established by Italian law in force. The experiments have demonstrated a high correlation between iron and manganese in both sampling sites; this could be attributed to pollution of metallurgical origin. Multivariate statistical analysis, carried out by HCA and PCA methods, has been used in order to differentiate samples in relation to sampling sites, sampling period and meteorological conditions.

Concentrations of metals (Al, Fe, Ti, Ni, Mn, Cr, Zn, Cu, Pb) were determined in surface sediments from Taranto gulf (Ionian Sea, Southern Italy) in order to assess the distribution and the bioavailability of metals. Total metal content and speciation of Fe, Ni, Mn, Zn, Cu and Pb were determined. Sediment cores were also sampled in some stations of particular interest. The analytical results show that metals distribution does not show significant variations in relation to depth. Metal distribution in the Taranto gulf is mainly influenced by industrial wastes from Taranto town, by rivers of the Basilicata region and by prevailing anticlockwise marine currents. These factors cause an accumulation of metals in the sediments near to the coasts of Calabria. The statistical analysis, effected by HCA and PCA methods, can be considered a good starting point in order to classify sediment samples and to locate accumulation areas. Metal speciation shows that Fe, Ni and Zn are present in sediments mainly as sulphides, Mn is present principally in an ion-exchange form or bound to carbonate, while Cu and Pb are mainly present in the fraction bounds to humic acids.

The concentrations of 17 parent PAHs, with molecular weight from 128 to 278 Daltons, were determined in surface sediments from the Mar Piccolo of Taranto. The analytical results were compared with the published results for other coastal areas of the Mediterranean Sea. The analyses were performed by gas chromatography coupled to mass spectrometry (GC-MS). Total PAH content in sediments ranged from 380 to 12750 ng g(-1) dry weight. The levels of the PAHs was higher than the one reported for sediments of the Adriatic Sea and Cretan Sea and of the same order of magnitude of the one known for coastal areas of the western and the eastern Mediterranean Sea. The PAHs distribution showed similar patterns in all sediments analyzed, with compounds with three or more rings. These patterns of distribution and the ratios among low molecular weight PAHs/high molecular weight PAHs, phenanthrene/anthracene and fluoranthene/pyrene indicated that pyrogenic inputs are the main source of these compounds in the Mar Piccolo basin. Based on the comparison of both the individual and the total PAH concentrations with proposed sediment quality guidelines, the acute biological effects on the marine organisms should be negligible.

To estimate the presence of metal and non-metal micro-pollutants in the soils of the Lecce and Brindisi districts, an analytical study has been carried out on samples of surface soils taken from agricultural areas. The research has concerned the determination of the following micro-pollutants: Cu, Ni, Cr, Zn, Pb, Be, Cd, As, Hg, Sb e Tl. Statistical techniques, such as Principal Component Analysis and Clustering Analysis, have been utilised to examine the correlations among the different parameters and to define contamination areas. The results show that the amount of micro-pollutants in the superficial stratum of the examined soils is in the range permitted by the regulations in force, with the exception of arsenic and thallium. Arsenic concentrations are near to the maximum admissible value, while thallium concentrations are in 56% of the samples higher than the admissible value both in the soil and underground. The most significant parameter from a toxicological point of view is thallium, which has its maximum concentration in the soils located near the industrial area of Brindisi.

In the present work, a study of a physico-chemical characterisation of underground waters, utilised for agriculture and human use in the Lecce district (Southern Italy) has been reported. The aim of the work has been to define the quality of underground waters in the different areas and to value salt contamination due to seawater intrusion. Statistical techniques, such as Principal Component Analysis (PCA) and Cluster Analysis (CA), have been utilised to examine the correlations among the different parameters and to define contamination areas. The results have shown a high salt contamination in artesian wells of the Ionian Sea coast.