Search

Purpose: The purpose of this paper is to prepare a multifunctional nanocomposite that is slow-release and resistant to seawater corrosion and biofouling corrosion and to explore the synergistic effect between the two corrosion inhibitors. Design/methodology/approach: The morphology, structure and release properties of CAP@HNTs, BTA@HNTs and CAP/BTA@HNTs were investigated by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, specific surface area analysis and UV spectrophotometry. The corrosion resistance and antimicrobial properties were investigated by electrochemical measurements and bioinhibition rate tests, and the synergistic effect between the two corrosion inhibitors was explored by X-ray photoelectron spectroscopy. Findings: The CAP/BTA@HNTs are responsive to acidic environments and have significantly improved antibacterial and corrosion resistance compared with CAP@HNTs and BTA@HNTs. CAP and BTA have a positive synergistic effect on anticorrosion and antifouling. Originality/value: Two types of inhibitors, anticorrosion and antifouling, were loaded into the same nanocontainer to prepare a slow-releasable and multifunctional nanocomposite with higher resistance to seawater corrosion and biocorrosion and to explore the synergistic effect of CAP and BTA on corrosion resistance. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to reveal the effect of nano-Al2O3 particle addition on the nucleation/growth kinetics, microhardness, wear resistance and corrosion resistance of Co–P–xAl2O3 nanocomposite plating. Design/methodology/approach: The kinetics and properties of Co–P–xAl2O3 nanocomposite plating prepared by electroplating were investigated by electrochemical measurements, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Vickers microhardness measurement, SRV5 friction and wear tester and atomic force microscopy. Findings: A 12 g/L nano-Al2O3 addition in the plating solution can transform the nucleation/growth kinetics of the plating from the 3D progressive model to the 3D instantaneous model. The microhardness of the plating increased with the increase of nano-Al2O3 content in plating. The wear resistance of the plating did not adhere strictly to Archard's law. An even and denser corrosion product film was generated due to the finer grains, with a high corrosion resistance. Originality/value: The effect of different nano-Al2O3 addition on the nucleation/growth kinetics and properties of Co–P–xAl2O3 nanocomposite plating was investigated, and an anticorrosion mechanism of Co–P–xAl2O3 nanocomposite plating was proposed. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to improve the corrosion resistance of stainless-steel bipolar plate by magnetron sputtering. Design/methodology/approach: TiC/amorphous carbon composite film was deposited by magnetron sputter at four different temperature of 25°C, 200°C, 300°C and 400°C. The morphology, composition and structure of the film were characterized by scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy. And its corrosion behavior was analyzed through electrochemical impedance spectroscopy, potentiodynamic and potentiostatic polarization tests. Findings: A compact TiC/amorphous carbon film was prepared by magnetron sputtering on 316L stainless steel, and the particles of the film were refined with the increase in sputtering temperature. High temperature promoted the formation of TiC and C–C sp2 hybrid carbon, but excessively high temperature caused the oxidation of Ti and a significant decrease in sp2 hybrid carbon. The corrosion resistance of the film increased with the temperature, and the corrosion current density polarization at 0.86 V and 1.8 V for TiC/a–C film prepared at 400 °C is only 1.2% and 43.2% of stainless steel, respectively. Originality/value: The corrosion resistance of amorphous carbon films was improved by the doping of Ti carbide, and the appropriate sputtering temperature was obtained. [ABSTRACT FROM AUTHOR]

Purpose: Nickel-aluminum bronze (NAB) has been widely used in ship propellers. It is always subjected to local micro-plastic deformation in service environments. This paper aims to study the influence of plastic deformation on the mechanical strength and corrosion resistance of NAB in 3.5 Wt.% NaCl solution. Design/methodology/approach: Scanning electron microscope and X-ray diffraction were used to analyze the microstructure of NAB alloy with different plastic deformations. Mechanical properties of the sample were measured by tensile experiment, and corrosion behavior was studied by electrochemical measurements and the long-term immersion corrosion test. Findings: Results showed that the plastic deformation caused lattice distortion but did not change the microstructure of NAB alloy. Microhardness and yield strength of NAB were significantly improved with the increase of deformation. The lattice distortion accelerated the formation of corrosion product film, which made the deformed alloy show a more positive open-circuit potential and an increased Rp. However, during the long-term immersion corrosion, the corrosion resistance of NAB alloys deteriorated with the increase of plastic deformation. This is because larger plastic deformation brought about higher internal stress in corrosion product film, which resulted in the premature peeling of the film and the loss of its protective effect on the alloy substrate. Originality/value: Tensile plastic deformations were found to cause a decline in the corrosion resistance of NAB. And the mechanism was clarified from the evolution of corrosion products during the corrosion process. [ABSTRACT FROM AUTHOR]