Search

Purpose: This study aims to investigate the corrosion inhibitor effect of migrating corrosion inhibitor (MCI) on Q235 steel in high alkaline environment under cathodic polarization. Design/methodology/approach: This study investigated the electrochemical characteristics of Q235 steel with and without MCI by polarization curve and electrochemical impedance spectroscopy. Besides, the surface composition of Q235 steel under different environments was analyzed by X-ray photoelectron spectroscopy. In addition, the migration characteristic of MCI and the adsorption behavior of MCI under cathodic polarization were studied using Raman spectroscopy. Findings: Diethanolamine (DEA) and N, N-dimethylethanolamine (DMEA) can inhibit the increase of Fe(II) in the oxide film of Q235 steel under cathodic polarization. The adsorption stability of DMEA film was higher under cathodic polarization potential, showing a higher corrosion inhibition ability. The corrosion inhibition mechanism of DEA and DMEA under cathodic polarization potential was proposed. Originality/value: The MCI has a broad application prospect in the repair of damaged reinforced concrete due to its unique migratory characteristics. The interaction between MCIs, rebar and concrete with different compositions has been studied, but the passivation behavior of the steel interface in the presence of both the migrating electric field and corrosion inhibitors has been neglected. And it was investigated in this paper. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to prepare a multifunctional nanocomposite that is slow-release and resistant to seawater corrosion and biofouling corrosion and to explore the synergistic effect between the two corrosion inhibitors. Design/methodology/approach: The morphology, structure and release properties of CAP@HNTs, BTA@HNTs and CAP/BTA@HNTs were investigated by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, specific surface area analysis and UV spectrophotometry. The corrosion resistance and antimicrobial properties were investigated by electrochemical measurements and bioinhibition rate tests, and the synergistic effect between the two corrosion inhibitors was explored by X-ray photoelectron spectroscopy. Findings: The CAP/BTA@HNTs are responsive to acidic environments and have significantly improved antibacterial and corrosion resistance compared with CAP@HNTs and BTA@HNTs. CAP and BTA have a positive synergistic effect on anticorrosion and antifouling. Originality/value: Two types of inhibitors, anticorrosion and antifouling, were loaded into the same nanocontainer to prepare a slow-releasable and multifunctional nanocomposite with higher resistance to seawater corrosion and biocorrosion and to explore the synergistic effect of CAP and BTA on corrosion resistance. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to reveal the effect of nano-Al2O3 particle addition on the nucleation/growth kinetics, microhardness, wear resistance and corrosion resistance of Co–P–xAl2O3 nanocomposite plating. Design/methodology/approach: The kinetics and properties of Co–P–xAl2O3 nanocomposite plating prepared by electroplating were investigated by electrochemical measurements, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Vickers microhardness measurement, SRV5 friction and wear tester and atomic force microscopy. Findings: A 12 g/L nano-Al2O3 addition in the plating solution can transform the nucleation/growth kinetics of the plating from the 3D progressive model to the 3D instantaneous model. The microhardness of the plating increased with the increase of nano-Al2O3 content in plating. The wear resistance of the plating did not adhere strictly to Archard's law. An even and denser corrosion product film was generated due to the finer grains, with a high corrosion resistance. Originality/value: The effect of different nano-Al2O3 addition on the nucleation/growth kinetics and properties of Co–P–xAl2O3 nanocomposite plating was investigated, and an anticorrosion mechanism of Co–P–xAl2O3 nanocomposite plating was proposed. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to study the effect of chloride concentration on the properties of passive film formed on Q235 steel in simulated concrete pore solutions. Design/methodology/approach: Mott–Schottky analysis and electrochemical impedance spectroscopy were used to study the passive film of Q235 steel in simulated concrete pore solution. X-ray photoelectron spectroscopy was used to analyze the composition of passive film on Q235 steel. Findings: When the chloride concentration is below the chloride threshold value, open circuit potential (OCP) and Rct gradually increases and donor concentration (ND) remains unchanged with the increasing immersion time. When the chloride concentration exceeds chloride threshold value, OCP and Rct decreases after a temporary increase and ND increases. The linear region of the Mott–Schottky curve lost its linearity. The electrochemical process control step is changed from charge transfer control to oxygen diffusion control. As the chloride concentration increases, the FeO content in the passive film increases and the Fe2O3 content decreases. Chloride can destroy the outer layer of passive film and introduce impurities. Originality/value: The effects of chloride and immersion time on the change process of passive films on Q235 steel in simulated concrete pore solution were studied using electrochemical methods. The mechanism of chloride destroying passive film was analyzed. [ABSTRACT FROM AUTHOR]