Search

Fan noise, comprising both tonal and broadband components, is a predominant source of noise in aero-engines. Calculating duct acoustic modes for random broadband noise is more complex than that for tonal noise. This paper proposes a probabilistic method for identifying duct acoustic modes based on non-synchronous measurements from microphone arrays. The method overcomes the challenge of acoustic mode aliasing and accurately identifies duct modes in the presence of broadband fan noise. By rotating a circular duct with a microphone array, the proposed method equivalently increases the number of non-synchronous microphone measurement points. The completion of the cross-spectral matrix is realized by the Fast Iterative Shrinkage Thresholding Algorithm (FISTA) to obtain the sound pressure signals from more measurement points. The mode coefficients are estimated using a hierarchical a priori probability method. The inverse problem of mode identification is represented by a Bayesian framework based on a Gaussian-scale mixture prior model. Simulations and experiments validate the method's effectiveness in suppressing mode aliasing, providing accurate results for duct mode identification with broadband noise, eliminating the influence of interfering modes on identification results, and offering improved observation of mode characteristics across a wide frequency and rotational speed range. • The non-synchronous measurements technique is employed to increase the number of measurement points. • A probabilistic model with a hierarchical prior is utilized to characterize the sound field. • The iterative parameter adjustment process is adaptive. • Experiments were performed on an axial compressor test rig to validate the proposed method. [ABSTRACT FROM AUTHOR]

The Non-synchronous Measurements (NSM) was proposed to enhance the accuracy of reconstruction and reduce the measurement cost. However, the investigated object of conventional NSM are only sparsely distributed sound sources, and little emphasis placed on the reconstructed accuracy of the spatially extended sound source. In this article, the traditional NSM is further investigated in the spatially extended sound source, and the sound pressure information is reconstructed by Bayesian compressive sensing algorithm (BCS). Firstly, the spatially extended sound source is scanned by moving the rectangular microphone array, and the measurement effects of the array with large aperture and high density are approximately obtained by using NSM technique. Then, BCS is applied to reconstruct sound field by the NSM of sound pressure. The results of numerical simulations provide evidence for the feasibility of applying the proposed investigation to the spatially extended sound source. NSM has advantages in reconstruction accuracy compared with the single measurement. At the same time, the reconstructed sound pressure under NSM can replace the simultaneous measurement (SM) results of multi-array, which avoids the limitation of using reference microphone in increasing the number of channels and spatial layout. The experimental results of the driven steel plate provide additional evidence to support the effectiveness and feasibility of the investigation. • The application problem of the NSM in the spatially extended sound source like the driven steel plate is investigated. • The NSM increases the number of microphones and avoids the limitation of using reference microphone in increasing the number of channels and spatial layout. • The traditional NSM is further investigated in the spatially extended sound source, and the sound pressure is reconstructed by BCS. [ABSTRACT FROM AUTHOR]

• The non-synchronous measurements in the large-aspect-ratio cabin is investigated. • Non-synchronous measurements is applied to suppress reverberation interference. • The optimal spherical array measurement scheme and basis functions are determined. The resolution of conventional acoustic imaging methods in a large-aspect-ratio cabin is reduced seriously by array parameters limitation and reverberation. The non-synchronous measurements technique breaks through the limitation of array shape and the number of microphones. This method can approximate the result of synthetic large-aperture array acoustic imaging. The increase in the number of microphones and low-rank constraint assumption in non-synchronous measurements suppress the reverberation interference. The low-rank constraint filters out the eigenvalues of the reverberation sound other than the main noise sources, which is acted as an eigenvalue filter. It has been demonstrated that non-synchronous measurements with 3D beamforming can improve the resolution of acoustic imaging in cubic space, but the related research on the large-aspect-ratio cabin is still missing. The non-synchronous measurements method is applied to achieve high-resolution acoustic imaging in a large-aspect-ratio cabin in this paper. The array measurement scheme is investigated comprehensively, including the number of non-synchronous measurements, the array step distance and appropriate spatial basis functions. The experimental results show that the non-synchronous measurements can achieve high-resolution 3D acoustic imaging in the cabin of an urban rail vehicle. [ABSTRACT FROM AUTHOR]

Acoustic imaging from non-synchronous measurements is a powerful method that can achieve excellent performance of a densely sampled large array by using an arbitrary prototype array. It has attracted significant interest recently since it is beyond the fundamental limitation of the working frequency determined by the size and microphone spacing of an array. One basic assumption of the non-synchronous measurements theory is the spatial continuity of the acoustic field, which is implemented by introducing the spatial basis function. Nevertheless, a comprehensive investigation of spatial basis function in the context of non-synchronous measurements is still missing. Two kinds of methods are proposed to construct spatial basis functions based on the homogeneous Helmholtz equation solution in this paper. One is the generalized harmonic polynomials (GHPs) and the other is the plane wave expansion (the quasi-uniform plane wave and the non-uniform plane wave). Comparisons of their spectral matrix completion errors show that the proposed construction methods of spatial bases can both yield low errors. Moreover, the construction of the proposed bases is simple to be implemented with only one dimension parameter to be chosen and suitable for the complex sound field. The effectiveness of the proposed bases in the non-synchronous measurements is also validated with simulations and an experiment. [ABSTRACT FROM AUTHOR]