Search

This study presents a critical review on the application of magnetite-based catalysts to industrial wastewater decontamination by heterogeneous Fenton oxidation. The use of magnetic materials in this field started only around 2008 and continues growing increasingly year by year. The potential of these materials derives from their higher ability for degradation of recalcitrant pollutants compared to the conventional iron-supported catalysts due to the presence of both Fe(II) and Fe(III) species. In addition, their magnetic properties allow their easy, fast and inexpensive separation from the reaction medium. The magnetic materials applied up to now can be classified in three general groups: magnetic natural minerals, in-situ -produced magnetic materials and ferromagnetic nanoparticles. A survey of the catalysts investigated so far is presented paying attention to their nature and competitive features in terms of activity and durability. [ABSTRACT FROM AUTHOR]

This work explores the potential application of naturally-occurring minerals as inexpensive catalysts in heterogeneous Fenton, namely catalytic wet peroxide oxidation (CWPO). The availability, low cost and environmentally friendly character of those materials make them interesting candidates for such application. The performance of magnetite, hematite and ilmenite as CWPO catalysts has been tested under different working conditions, which include temperature (25–90 °C), H 2 O 2 dose (250–1000 mg L −1 ) and catalyst concentration (1–4 g L −1 ). The operating temperature plays a key role on the rate of H 2 O 2 decomposition so that with magnetite H 2 O 2 conversion after 4 h increased from 8 to 99% by increasing the temperature from 25 to 90 °C. Based on the reaction mechanism proposed, a kinetic model was developed which successfully described the experimental results on H 2 O 2 decomposition. The catalytic performance of the minerals tested at temperatures above the ambient was demonstrated using phenol (100 mg L −1 ) as target pollutant. Unprecedented efficiencies of H 2 O 2 consumption, higher than 80% were achieved, allowing high oxidation and mineralization, i.e. complete phenol conversion and almost 80% TOC reduction at 75 °C with a catalyst loading of 2 g L −1 and the theoretical stoichiometric amount of H 2 O 2 for complete mineralization of phenol (500 mg L −1 ). Magnetite is particularly attractive, since it showed the highest activity and can be easily separated from the liquid phase given its magnetic properties. All the minerals tested suffered low iron leaching and magnetite and hematite showed a good reusability upon three consecutive runs. However, in this case long-term durability is not a crucial issue, given the availability and low cost of these minerals. [ABSTRACT FROM AUTHOR]