Search

Abstract: The mechanisms of direct N2O decomposition and N2O reduction by H2 or NH3 on RuO2 has been studied by means of steady-state catalytic tests at ambient pressure, transient experiments in a temporal analysis of products (TAP) reactor, and density functional theory (DFT) simulations. Bulk RuO2 is very active for N2O decomposition into N2 and O2, achieving full conversion at 723K. According to the DFT calculations, coordinatively unsaturated ruthenium (Rucus) sites are active for the decomposition and oxygen elimination from the surface is rate-limiting step. When pre-reducing RuO2 with H2, the de-N2O activity in the low-temperature region increases. This is attributed to the higher reactivity of surface oxygen vacancies created by H2 at bridge sites compared to Rucus sites. Co-feeding of hydrogen or ammonia with nitrous oxide strongly accelerates the rate of N2O elimination. TAP studies show that oxygen species formed upon N2O decomposition over RuO2 react with NH3 and H2 yielding N2, NO, N2O, and H2O. Both TAP experiments and DFT simulations show that the N-containing intermediates coming from ammonia adsorb much stronger on the catalyst surface than H-containing intermediates coming from hydrogen. This causes blockage of active sites for N2O decomposition by the former species, accounting for the higher efficiency of H2 as reductant for N2O. The presence of O2 in the feed cancels the reducing effect of H2 or NH3 due to the more favorable re-oxidation of reduced RuO2 by O2 compared to N2O. [Copyright &y& Elsevier]

Abstract: Mechanistic and kinetic aspects of direct N2O decomposition over BaFeAl11O19 hexaaluminate were investigated in the Temporal Analysis of Products (TAP) reactor and compared with those previously determined for Fe-MFI zeolites. The catalysts were chosen due to their de-N2O operation in significantly different temperature regimes. Several micro-kinetic models were evaluated for describing the transient responses of N2O, N2, and O2 obtained in N2O pulse experiments at 823–973K. Thorough discrimination between these models enabled us to conclude that the preferred models of N2O decomposition over BaFeAl11O19 and Fe-MFI zeolites differ in the reaction pathways leading to O2 and N2. Gas-phase N2 and O2 are simultaneously formed over BaFeAl11O19 upon interaction of gas-phase N2O with a bi-atomic surface oxygen (*–O2) species. Contrarily, the formation of O2 over Fe-MFI occurs via a sequence of three elementary heterogeneous steps and limits the overall rate of N2O decomposition. Despite the easy O2 formation, BaFeAl11O19 is less active for N2O decomposition below 973K than the Fe-MFI zeolites due to the low coverage by *–O2. According to our quantitative micro-kinetic analysis, this species is formed when gas-phase N2O reacts with a mono-atomic oxygen (*–O) species. This reaction pathway is strongly influenced by the degree of isolation of iron species. The higher the degree of iron isolation in the catalyst, the lower the de-N2O activity. [ABSTRACT FROM AUTHOR]

Abstract: The reaction pathways of N2 and N2O formation in the direct decomposition and reduction of NO by NH3 were investigated over a polycrystalline Pt catalyst between 323 and 973K by transient experiments using the temporal analysis of products (TAP-2) reactor. The interaction between nitric oxide and ammonia was studied in the sequential pulse mode applying 15NO. Differently labelled nitrogen and nitrous oxide molecules were detected. In both, direct NO decomposition and NH3–NO interaction, N2O formation was most marked between 573 and 673K, whereas N2 formation dominated at higher temperatures. An unusual interruption of nitrogen formation in the 15NO pulse at 473K was caused by an inhibiting effect of adsorbed NO species. The detailed analysis of the product distribution at this temperature clearly indicates different reaction pathways leading to the product formation. Nitrogen formation occurs via recombination of nitrogen atoms formed by dissociation of nitric oxide or/and complete dehydrogenation of ammonia. N2O is formed via recombination of adsorbed NO molecules. Additionally, both products are formed via interactions between adsorbed ammonia fragments and nitric oxide. [Copyright &y& Elsevier]

Abstract: A simple cellulose-templating (CT) method was used to prepare Na–CaO catalysts for high-temperature N2O decomposition to N2 and O2 in excess of NO, O2, and H2O. According to this method, cellulose materials were soaked in aqueous solution of calcium and/or sodium nitrates followed by burning out the template material. Depending on the nature of cellulose template and calcination procedure, the obtained catalysts consisted of regularly shaped particles of 100–400nm. Conventionally prepared Na–CaO reference materials had randomly shaped particles on a micron scale. Compared to the latter catalysts, the CT ones showed higher de-N2O activity and resistance against inhibition by NO and O2, which make them interesting from industrial point of view. Transient analysis of NO interaction with the studied catalysts in the presence and the absence of O2 enabled us to conclude that the superior de-N2O performance of the CT materials is due to improved desorption of surface NO x species acting as inhibitors for N2O decomposition. [ABSTRACT FROM AUTHOR]