Search

• Decoupling of GDP from all energy sources under multiple principles are examined. • World economy achieved weak energy decoupling in most years during 2000–2011. • World economy coupled with coal use and tended to couple with cleaner energy use. • None of studied economies achieved long-term GDP-embodied energy decoupling. • Decoupling delusions occurred when only considering direct and total energy use. Decoupling indicators are widely used to understand links between economic growth and energy use. However, traditional decoupling analyses mostly focus on domestic energy consumption (i.e., the production-based principle) and neglect off-site energy use across global supply chains to satisfy an economy's final consumption (i.e., the consumption-based principle). Moreover, analyses for total primary energy conceal an economy's preference for different energy sources. Therefore, this paper evaluates decoupling states of GDP from all types of primary energy use under consumption-based principle, for world economy and eight typical economies during 2000–2011. Regarding total primary energy, world economy witnessed weak decoupling in most years, and most economies studied (e.g., USA, Japan and China) achieved decoupling initially but performed negative decoupling finally. For EU, USA, Japan, Russia and India, production-based decoupling performances were generally better than consumption-based ones. Decoupling phenomena detected under production-based principle even became coupling or negative decoupling under consumption-based principle in some cases. As for each energy source, world economy decoupled from oil use, but still coupled with coal use, and gradually showed a trend to couple with natural gas and renewables use. Different energy sources showed distinct decoupling degrees from GDP, affected by individual embodied energy requirement structure. This paper uncovers potential energy decoupling delusions to deepen the understanding of relationships between energy use and economic growth. [ABSTRACT FROM AUTHOR]

• A conceptual framework was designed for a bioenergy system for rural India. • Agro waste potential was estimated through survey. • Techno-economic analysis of an integrated system was conducted. • Uncertainty was assessed through Monte-Carlo simulation. This paper presents a holistic approach to promote bioenergy in India by designing a conceptual framework that combines resource, technology and market. The proposed concept is an attempt to integrate pelletization and gasification technology for bioenergy system development through an end-to-end approach. The potential of bioenergy resource (i.e. agro waste) was estimated based on survey. The study further assessed the economic feasibility of agro waste pelletization. The economic evaluation was made using indicators such as net present value (NPV), internal rate of return (IRR), discounted payback period (DPBP) etc. Pellet plant capacity of 0.5 ton h−1 showed acceptable economics and the NPV , IRR and DPBP were ₹9.35 million ($0.13 million), 41% and 2.8 years, respectively. Moreover, the larger capacity plants (>2 ton h−1) were subjected to more risk under low pellet prices (< ₹5 kg−1 or $71.4 ton−1). The cash flow statement showed a strong debt paying ability for the project. Pellet price was the most sensitive factor followed by annual operating days on pellet plant economics. Monte Carlo simulation predicted an average NPV of ₹9.3 ± 2.0 million ($133.2 ± 29.1 thousand). The economics of fuel pellets utilization in a gasifier for energy applications was also evaluated. The pellet fed gasifier system appeared to be cost competitive with commercial liquefied petroleum gas (LPG) and wood at a pellet price range of ₹6.3–8.8 kg−1 ($90–126 ton−1) in a select scenario. Overall, the designed framework appears to reduce over-dependency on wood or fossil sources, and facilitate bioenergy promotion in rural areas. [ABSTRACT FROM AUTHOR]

• The study depicts societal issues associated with the development projects. • A road map developed that focuses on avenues related to establishment of new development projects. • The SEETA model, based on Multi-Criteria Decision Making techniques is proposed. • Model is demonstrated using comparison of fourteen hydropower plants. • The hydropower plants are compared around five main and fifteen sub-criteria. Selecting an appropriate location for a large infrastructure project poses difficult situations. It shall satisfy sustainability indicators and establish harmony among multiple goals of multiple stakeholders. In such a situation, Multi-Criteria Decision Making techniques allow assessing qualitative and quantitative attributes, analysing and removing subjective biases and help in arriving at objective decisions. However, a single Multi-Criteria Decision Making technique may not be an effective tool to generate concrete results as there is no validation of the results. By utilising hybrid Multi-Criteria Decision Making methods, one can incorporate, gauge, and assess the range of social, economic, and environmental impacts precisely and achieve an accurate result by validating results by other methods. Therefore, this paper develops a model called as Social, Economic, Environmental and Technical Assessment model. It combines four fuzzy Multi-Criteria Decision Making techniques viz. Fuzzy Stepwise Weighted Assessment Ratio Analysis, Fuzzy Multi-Objective Optimization by Ratio Analysis, Fuzzy Weighted Aggregated Sum Product Assessment and Fuzzy Technique for Order of Preference by Similarity to Ideal Solution. This paper utilises the case of hydropower plants in India, how the policy and decision-makers can arrive at the selection of the best location for an infrastructure project. According to the assessment value, Teesta Low Dam IV (Darjeeling, West Bengal) is the preferred hydropower plant for all selected methods. The State could bring social justice, ecological stability; achieve economic benefits and sustainability by appropriating this proposed model in other development fields. [ABSTRACT FROM AUTHOR]

Highlights • India's emissions and intensity are driven by private consumption, followed by investment and exports. • India's emission increase comes from final demand and production structure changes. • India's increase of household indirect emissions mainly comes from per capita income increase. • India's aggregate embodied intensity by final demand category all increased. • India's aggregate embodied intensity changes mainly determine by production structure changes. Abstract India is the second largest developing country and fourth largest carbon emitter in the world. It has registered the rapid economic growth (7–9%) in the last decade. However, both its total carbon emissions and emission intensity (CO 2 emissions per GDP) kept increasing during period 2007–2013. There are few studies using input-output (I-O) analysis for India's energy/emissions in the literature. This paper tries to fill in the gap by using I-O framework to study India's total emissions and intensity changes and its driving forces with the latest data available and newly proposed techniques. The results show that India's carbon emission were mainly driven by private consumption (50–55%), followed by investment (25–26%) and exports (14–19%). During period 2007/08–2013/14, India's total emissions increased by 56.6%, where total final demand change resulted in emissions increasing and the shift of demand from raw material industry to high-value added manufacturing industry helped to reduce the emissions. When measuring India's relative emission efficiency, its aggregate embodied intensity (AEI) indicator in aggregate was mainly determined by private consumption (47–49%), followed by investment (23–24%) and exports (15–18%). From 2007/08 to 2013/14, the AEI values in aggregate and by final demand category all increased except the AEI of inventory change, mainly caused by production structure change. The emission efficiency improvements helped to reduce India's total emissions and carbon intensity, but the contributions were small. The policy implications of our findings are also discussed. [ABSTRACT FROM AUTHOR]

Appliance labels are a widely used policy instrument to increase the adoption of energy-efficient technologies. Most countries use categorical labels to facilitate comparison of appliances based on energy consumption. Studies have found that consumers respond positively to the labels, but the differentiated response to the categories on labels is not well understood in the literature. This study presents the results of a discrete choice experiment corroborated by an analysis of secondary market data to demonstrate that consumers differentiate between label categories; with a greater value being placed on appliances with higher levels of energy efficiency performance. We examine two appliances - air conditioners and refrigerators and observe that there are some differences in consumer response - likely due to the different usage patterns of the two appliances. Consumer responses were observed in hypothetical choice situations constructed ensuring statistical and design efficiency. In a mixed logit model specification with correlated random parameters, the magnitude and the distribution of consumer preference for the highest category of energy efficiency are estimated. The results are validated by estimating the incremental price of higher category of energy efficiency using market data for comparison. The sources of consumer heterogeneity for the highest category of energy efficiency are identified after controlling for other consumer variables. The findings presented in this paper are useful for improving the effectiveness of existing energy efficiency programs and designing new programs to accelerate adoption of energy efficient technologies. [ABSTRACT FROM AUTHOR]

Since coal will be widely used in the next decades, mainly in the developing countries such as China and India, carbon capture and storage (CCS) technologies will have a key role in the containment of global warming. This paper presents a techno-economic comparison between the most promising power generation technologies for a CO 2 -free power generation in a short-term future. In particular, three different power generation technologies have been considered in their conventional (without CCS) and CO 2 -free configurations: (a) ultra supercritical (USC) pulverized coal combustion, (b) oxy-coal combustion (OCC) and (c) integrated gasification combined cycle (IGCC). Process simulation, based on Aspen Plus and Gate Cycle commercial tools, allows to calculate plant performance, including the energy penalty due to the CCS system (10.9% points for USC and 8.7% points for IGCC). In parallel, a detailed economic assessment shows that, among the commercial-ready technologies, USC could be the most convenient solution for power generation without CCS (presenting a levelized cost of electricity – LCOE – of 38.6 €/MW h, significantly lower than 43.7 €/MW h of IGCC), whereas IGCC becomes competitive for CO 2 -free systems (with a LCOE of 59.6 €/MW h, to be compared with 63.4 €/MW h of USC). Moreover, oxy-coal combustion, which is currently not mature enough for commercial-scale applications, promises to become strongly competitive for CCS applications due to its relatively low levelized cost of electricity (62.8 €/MW h). This kind of analysis typically presents strong uncertainties, due to the variability of several key parameters (e.g. fuel and CCS prices, determined by the fluctuation of the international markets, or an improvement of the technologies). Therefore, a sensitivity analysis has been done to determine the effects of these potential fluctuation or the improvement on the economic performance of the plant. [ABSTRACT FROM AUTHOR]

This paper presents a quantitative assessment of Sustainable Energy Security (SES) of the energy demand sub-system for India by calculating a multidimensional SES index. The demand sub-system has been evaluated for four dimensions of SES, viz., Availability, Affordability, Efficiency and (Environmental) Acceptability using 23 selected metrics. A hierarchical structure has been used to construct indices using ‘scores’ (objective values of selected metrics), and ‘weights’ (subjective values, representing importance of each metric) which are then aggregated, to obtain a SES index. Various sectors of the energy demand sub-system are evaluated and dimensional and sectoral indices are calculated for the years 2002, 2007 and 2012. Assessment of the obtained energy indices is undertaken (separately for rural and urban residential sector) and results reveal that all (except one) sectoral indices have shown an increase during the period of assessment. The results show that from 2002 to 2012, the aggregate SES index has increased by approximately 10% which indicates a gradual improvement in the sustainability and security of the energy demand sub-system. However, the SES index is approximately 0.7 (against a desired target of 1.0), which implies that there is still a large scope for improvement in the performance of the India’s energy demand sub-system. A sensitivity analysis of various indices reveals that the SES index is relatively robust to variation in weights allotted to different dimensions and hence provides a reliable assessment of the energy demand sub-system. [ABSTRACT FROM AUTHOR]

Renewable energy has a critical role in limiting the greenhouse gas (GHG) emissions. This paper assesses the implication of aligning renewable energy deployment target with national emission reduction target for mitigation cost. The assessment methodology uses Asia-Pacific Integrated Assessment/computable general equilibrium (AIM/CGE) model to determine the mitigation cost in terms of GDP and welfare loss under alternative renewable targets in different climate-constrained scenarios. A range of country-specific emission constraints is taken to address the uncertainties related to global emission pathway and emission entitlement scheme. Comparative results show that China needs to increase its share of non-fossil fuel significantly in the primary energy mix to achieve the stringent emission reduction target compared to India. The mitigation cost in terms of economic and welfare loss can be reduced by increasing the penetration of the renewable energy to achieve the same emission reduction target. The modeling results show that coordinated national climate and renewable energy policies help to achieve the GHG emission reduction target in an efficient and cost-effective manner. [ABSTRACT FROM AUTHOR]

Small Hydro Power (SHP) is one of the most important renewable energy generation sources. It is a cost-effective technology that is being used for rural electrification in the developing countries including India. The Indian government is providing attractive initiatives to the private investors to promote faster development of SHP. Until now, a lot has been written about assessment, potential, advantages and the technical aspects of the SHP plants. However, the important business sustainability perspective has not been yet subjected to empirical analysis. Sustainable development involves three interconnected dimensions: social, economic and environmental sustainability. This paper attempts to investigate whether SHP business in India is a sustainable business. The study is based on the analysis of qualitative data acquired through 28 in-depth interviews with various actors that are connected to the SHP industry in India which include Independent Power Producers (IPPs), manufacturers, designers, consultants and representatives of various government organizations. The empirical material was collected in four states of India namely New Delhi, Himachal Pradesh, Uttarakhand and Jammu and Kashmir (J&K) in February, 2013. The data was acquired by individual in-depth interviews, group discussions and direct observation of one SHP plant. The results show that all the three dimensions of sustainability are being realized to a certain extent. However, utmost efforts have to be undertaken in order to call this sector completely sustainable. Both benefits and challenges in all these dimensions are highlighted and recommendations towards a sustainable SHP sector are provided. Further, this study also proposes suggestions for the interested investors. [ABSTRACT FROM AUTHOR]

Coal-fired energy generation is the backbone of India's power sector and considered a driver of its economic development. However, it is associated with detrimental environmental and health impacts in India and its fleet is currently struggling with overcapacity and inefficiency problems. One solution to address these challenges is the early retirement of some of India's coal-fired power plants. In this paper, we introduce multidimensional indices that identify plants for retirement based on comprehensive criteria that include technical and economic characteristics of plants as well as their environmental impacts. We implement an ensemble approach, where we formulate 8008 indices based on all possible combination of seven relevant parameters and rank plants accordingly. This approach facilitates a comprehensive analysis of the plants' performance on different parameters and provides a new outlook on plant retirements that differs from the common approach of retiring plants based solely on technical characteristics such as age, capacity, and heat rate. Our results show that top plants recommended for early retirement are typically 7 years older, 13% more expensive and have around 40% higher population exposure to emissions compared to an average plant in India. We estimate the potential costs saved from the retirement of the worst-performing 50 GW of generating capacity to be $21 billion resulting from shifting ownership towards a cheaper cost of capital and replacing coal by more competitive sources such as solar power. • Identify plants for early retirement based on technical, economic and environmental indicators. • Worst performing 50 GW capacity are older, more expensive to operate and have higher population exposure. • Costs saved from retiring 50 GW capacity and replacing them with solar are $21 billion. • A multidimensional approach is essential for a politically feasible phaseout of coal. [ABSTRACT FROM AUTHOR]

• Voltage profile improvement in distribution network using Demand Side Management. • Cost and load shedding optimization. • Real and reactive power support from consumer batteries. • Analysis with realistic loading conditions under frequency linked pricing environment. Voltage stability improvement and load profile management remain the major concerns of the power system load serving entities. The evolution in demand side management technology with automatic control enables a large number of appliances including energy storage devices to provide efficient ancillary services for the distribution utilities. In this paper, a novel methodology is developed for residential consumers using battery energy storage systems as a key vehicle for centralized incentive based demand side management. The aim is to employ energy storage at end-users' premises to provide both active and reactive power support to the distribution utility so as to achieve the desired voltage stability margin at various network nodes while optimizing the deviation settlement charges under frequency linked pricing environment. The results indicate that the centrally controlled active and reactive power dispatch from the energy storage minimizes the load shedding required to bring the network node voltages within the operating limits and optimizes the costs involved. The demonstration is carried out on the IEEE-33 bus radial distribution system using the realistic loading data of a distribution utility in India. The proposed strategy could be of immense importance to the distribution utilities to optimize load curtailment and maximize their social welfare while operating under real time pricing environment. [ABSTRACT FROM AUTHOR]

• Large on-site survey to provide real-world investment data of 108 iron-steel plants. • Agent-based integrated assessment framework to assess industry fuel-switching. • Fuel-switching assessment including 4 investment metrics and 5 comparable scenarios. • Partial-equilibrium agent-based scenarios of an evolving socio-technical system. • Partial-equilibrium agent interactions produce non-smooth gas uptake patterns. This paper presents the formulation and application of a novel agent-based integrated assessment approach to model the attributes, objectives and decision-making process of investors in a long-term energy transition in India's iron and steel sector. It takes empirical data from an on-site survey of 108 operating plants in Maharashtra to formulate objectives and decision-making metrics for the agent-based model and simulates possible future portfolio mixes. The studied decision drivers were capital costs, operating costs (including fuel consumption), a combination of capital and operating costs, and net present value. Where investors used a weighted combination of capital cost and operating costs, a natural gas uptake of ~12PJ was obtained and the highest cumulative emissions reduction was obtained, 2 Mt CO 2 in the period from 2020 to 2050. Conversely if net present value alone is used, cumulative emissions reduction in the same period was lower, 1.6 Mt CO 2 , and the cumulative uptake of natural gas was equal to 15PJ. Results show how the differing upfront investment cost of the technology options could cause prevalence of high-carbon fuels, particularly heavy fuel oil, in the final mix. Results also represent the unique heterogeneity of fuel-switching industrial investors with distinct investment goals and limited foresight on costs. The perception of high capital expenditures for decarbonisation represents a significant barrier to the energy transition in industry and should be addressed via effective policy making (e.g. carbon policy/price). [ABSTRACT FROM AUTHOR]