Search

Greenhouse gas (GHG) emissions are currently at the crux of political, environmental, technological, and cultural discussions due to climate change. A drastic reduction of GHG emissions is needed in order to mitigate potentially catastrophic climate change impacts. Thus, thoroughly understanding emission sources is imperative. A disaggregated analysis of Canada’s future GHG emission projections has not yet been conducted. The objectives in this paper are to assess disaggregated GHG emissions in Canada for the years 2014, 2030, and 2050, and analyze the results through Sankey diagrams. Emissions are calculated using a bottom-up multi-regional accounting-based Long-range Energy Alternative Planning systems model. Each major economic sector in Canada is analyzed including the electricity generation, residential, commercial and institutional, industrial, transportation, and agriculture sectors. The emissions released in these sectors are traced to the resources and end-uses responsible. Results are presented for Canada and for provinces individually. GHG emissions contained in exported resources are evaluated. Results show that Canada’s business-as-usual GHG emissions will grow from 732 million tonnes in 2014 to 780 and 798 million tonnes in 2030 and 2050, respectively. Canada exports more emissions contained in resources than it emits. Per capita emissions intensity will fall by 14% between 2014 and 2050. Results are compared to climate targets and key areas of GHG mitigation potential are identified. Alberta’s oil and gas sector and Ontario’s transportation sector are the two single largest sectoral sources of emissions by 2050. This research can help policy makers, innovators, and the public better understand GHG emissions, which can lead to more effective GHG mitigation. [ABSTRACT FROM AUTHOR]

A life cycle assessment (LCA) is an extremely useful tool to assess the greenhouse gas (GHG) emissions associated with all the stages of a crude oil’s life from well-to-wheel (WTW). All of the WTW life cycle stages of crude oil consume energy and produce significant amounts of GHG emissions. The present study attempts to quantify the WTW life cycle GHG emissions for transportation fuels derived from five North American conventional crudes through the development of an LCA model called FUNNEL-GHG-CCO ( FUN damental E n gineering Principl E s-based Mode L for Estimation of G reen H ouse G ases in C onventional C rude O ils). This model estimates GHG emissions from all the life cycle stages from recovery of crude to the combustion of transportation fuels in vehicle engines. The contribution of recovery emissions in the total WTW GHG emissions ranges from 3.12% for Mars crude to 24.25% for California’s Kern County heavy oil. The transportation of crude oil and refined fuel contributes only 0.44–1.73% of the total WTW life cycle GHG emissions, depending on the transportation methods and total distance transported. The GHG emissions for refining were calculated from the amount of energy use in the refining of crude oil to produce transportation fuels. All the upstream GHG emissions were allocated to gasoline, diesel, and jet fuel. Refining GHG emissions vary from 13.66–18.70 g-CO 2 eq/MJ-gasoline, 9.71–15.33 g-CO 2 eq/MJ-diesel, and 6.38–9.92 g-CO 2 eq/MJ-jet fuel derived from Alaska North Slope and California’s Kern County heavy oil, respectively. The total WTW life cycle GHG emissions range from 97.55 g-CO 2 eq/MJ-gasoline derived from Mars crude to 127.74 g-CO 2 eq/MJ-gasoline derived from California’s Kern County heavy oil. [ABSTRACT FROM AUTHOR]

• Life cycle assessment of utility-scale solar energy is performed. • Upstream production and assembly are the most emission-intensive life cycle stages. • Energy use during production and plant lifetime are the most sensitive parameters. • The system shows a net energy production with a net energy ratio up to 6.6. • The life cycle GHG emissions range from 98.3 to 149.3 g CO 2 eq /kWh. Grid-connected utility-scale solar PV has emerged as a potential pathway to ensure deep decarbonization of electricity in regions with fossil fuel-dominated energy mixes. Research on utility-scale solar PV projects mainly focuses on assessing technical or economic feasibility. Environmental performance assessments of large-scale solar applications are scarce. There is limited information on the greenhouse gas (GHG) emissions and energy footprints of utility-scale solar energy systems. Earlier studies conducted on small-scale solar systems have limited application in the grid system. We developed a comprehensive bottom-up life cycle assessment model to evaluate the life cycle GHG emissions and energy profiles of utility-scale solar photovoltaic (PV) system with lithium-ion battery storage to provide a consistent electricity supply to the grid with peak load options. We conducted a case study for a fossil fuel-based energy jurisdiction, Alberta (a western province in Canada). The results of the energy assessment show that raw material extraction, production, and assembly of solar panels are the key drivers, accounting for 53% of the total consumption. Energy consumed during battery manufacturing is responsible for 28%. The system shows a net energy production with a mean net energy ratio as high as 6.6 for two-axis sun tracking orientation. The life cycle GHG emissions range from 98.3 to 149.3 g CO 2 eq /kWh with a mean value of 123.8 g CO 2 eq /kWh. The largest emissions contribution is due to the manufacturing of batteries, 54% of the total emissions. The solar PV system offers a mean energy payback time of 3.8 years (with a range of 3.3 to 4.2 years). The results are highly sensitive to the expected lifetime of the system, the panel's peak wattage, and process energy consumption at various life cycle stages. [ABSTRACT FROM AUTHOR]