Search

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

Abstract: A great interest has been arising about the production of fuels and advanced chemicals from renewable resources such as wooden biomass in the so-called biorefineries. Pulp and paper mills are often seen as the most obvious fundamental module of such industrial sites, because of the common feedstock and the chemical transformations that already occur in the process. In this paper the model of real Kraft pulp and paper mill is developed and optimized from energetic point of view using process integration techniques, in order to assess the potential for energy saving and to establish a starting point for future research on biorefinery sites. Improvements to the configurations of the multi-effect evaporator and of the steam cycle in the CHP system have been introduced, and three different levels of heat integration boundaries have been considered (multi-effect evaporator, mill sub-processes, and total site). Results indicate a significant potential for the decrease in thermal energy requirement and/or the increase in power production for the same pulp and paper production. [Copyright &y& Elsevier]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

Abstract: The systematic, transparent and accurate on-line energy information of the production process is quite the basis of mill energy management and conservation. An Energy Management System (EMS) was built according to the characteristics of the energy usage in a typical newsprint paper mill. The EMS first realized the process data acquisition and integration, second fulfilled the on-line energy information calculation from the integrated data. A water and steam properties query component based on IAPWS-IF97 was developed and plugged into the EMS to facilitate the energy calculation of water and steam. The practical performance in the paper mill showed that the integrated energy information of the whole mill was gained and the on-line energy supervisory was achieved. In the end a systematic, transparent and accurate energy usage profile is obtained and it would provide the valuable fundamental energy data for the further energy analysis and optimization in the EMS. [Copyright &y& Elsevier]

Abstract: With the final aim of reducing the energy consumption and increase the methane production at Swedish pulp and paper mills, the methane potential of 62 wastewater effluents from 10 processes at seven pulp and/or paper mills (A–G) was determined in anaerobic batch digestion assays. This mapping is a first step towards an energy efficient and more sustainable utilization of the effluents by anaerobic digestion, and will be followed up by tests in lab-scale and pilot-scale reactors. Five of the mills produce kraft pulp (KP), one thermo-mechanical pulp (TMP), two chemical thermo-mechanical pulp (CTMP) and two neutral sulfite semi-chemical (NSSC) pulp. Both elementary and total chlorine free (ECF and TCF, respectively) bleaching processes were included. The effluents included material from wood rooms, cooking and oxygen delignification, bleaching (often both acid- and alkali effluents), drying and paper/board machinery as well as total effluents before and after sedimentation. The results from the screening showed a large variation in methane yields (percent of theoretical methane potential assuming 940NmL CH4 per g TOC) among the effluents. For the KP-mills, methane yields above 50% were obtained for the cooking effluents from mills D and F, paper machine wastewater from mill D, condensate streams from mills B, E and F and the composite pre-sedimentation effluent from mill D. The acidic ECF-effluents were shown to be the most toxic to the AD-flora and also seemed to have a negative effect on the yields of composite effluents downstream while three of the alkaline ECF-bleaching effluents gave positive methane yields. ECF bleaching streams gave higher methane yields when hardwood was processed. All TCF-bleaching effluents at the KP mills gave similar degradation patterns with final yields of 10–15% of the theoretical methane potential for four of the five effluents. The composite effluents from the two NSSC-processes gave methane yields of 60% of the theoretical potential. The TMP mill (A) gave the best average yield with all six effluents ranging 40–65% of the theoretical potential. The three samples from the CTMP process at mill B showed potentials around 40% while three of the six effluents at mill G (CTMP) yielded 45–50%. [Copyright &y& Elsevier]

Abstract: This paper studies allocation of fuel costs and CO2-emissions to heat and power in a CHP plant producing heat to an integrated pulp and paper mill and electricity to the liberalized electricity markets (or to the mill by the market price). The CHP plant and the mill are considered to be two separate economical units and both the mill and the CHP plant perspectives are discussed. Fuel costs and CO2-emissions are allocated using the energy, exergy and market based methods. The CHP plant purchases black liquor and bark from the mill. It also purchases oil from the markets to cover the whole fuel demand of the plant. The results indicate that the marked based method can be recommended as a “neutral” cost allocation method, because with that, the energy producer is not collecting extra margins from selling steam. This means that heat pricing is cost based. The results also indicate that depending on the emission factor and efficiency of alternative energy production form, the marked based method or the exergy method allocate the lowest CO2-emissions to heat. Therefore, the use of market based method for allocating costs and CO2 emissions can be recommended in order to use one single approach in both. [Copyright &y& Elsevier]

Abstract: A detailed mathematical process integration model of a pulp and paper mill in the Northern Sweden has been developed. The main objective of this work has been set to describe the practical development of the model with particular emphasis on the development of the digester and evaporation plant sub-models. Actual plant measurements have been used to validate the model. By implementing the sub-models into the complete plant model, the influence of different operation parameters on the overall plant performance has been investigated. Furthermore, introductory studies with the main objective to minimize the plant energy cost have been carried out. [Copyright &y& Elsevier]

In an era of increasing energy demands and environmental concerns, optimizing energy consumption within buildings is crucial. Despite the vast improvements in HVAC and lighting systems, plug loads remain an under-studied area for enhancing building energy efficiency. This paper studies smart plug active operating mode detection, plug-level load forecasting, and plug scheduling methodologies. This research leverages a unique dataset from the University of California, San Diego, consisting of readings from over 150 smart plugs in several office buildings for more than a year, notably during the post-Covid era. This dataset is made publicly available. A comprehensive literature review on plug, i.e. , appliances operating mode detection is presented. Novel unsupervised learning approaches are applied to identify plug operating modes. A pipeline integrating the detected modes with forecasting and scheduling is developed, aiming at building energy consumption reduction. Our findings offer valuable insights and promising results into smart plug management for energy-efficient buildings. • A novel year-long dataset of power readings from 169 office smart plugs is introduced. • The first review of plug load mode detection methods and terminology is presented. • The paper proposes an unsupervised method to identify plugs load operating modes. • The proposed smart plug scheduling pipeline reduces energy consumption by 20%. [ABSTRACT FROM AUTHOR]

Abstract: Chemical process simulation has proven to be an effective tool for performing a systematic and global analysis of energy systems to identify routes for maximizing the process efficiency concerning to the heat recovery. This paper shows an application of computer simulations in a Brazilian pulp mill, using two strategies for minimizing the mill energy consumption. In the first one, the overall heat transfer coefficient has been predicted for each body of the multiple effect evaporators by using continuous on-line data from the industrial plant in the black liquor recover unit. By monitoring oscillations of this heat transfer coefficient, the suitable time for washing the evaporator heat transfer surfaces can be well determined, reducing the energy loss during black liquor evaporation. In the second strategy, the liquor combustion has been simulated as function of the black liquor solids concentration to analyze its effect on the recovery boiler efficiency improvement. [Copyright &y& Elsevier]

CaO-CaCO 3 thermochemical energy storage is a promising technology for solar energy utilization and storage. Alkaline papermaking waste (APW) from paper mills, which is mainly composed of CaCO 3. Herein, TiO 2 /MnFe 2 O 4 co-modified APW was synthesized. The energy storage capacity of TiO 2 /MnFe 2 O 4 co-modified APW was studied during CaO-CaCO 3 thermochemical energy storage cycles in a duel fixed bed reactor. TiO 2 /MnFe 2 O 4 co-modified APW mainly consists of CaO, MgO, CaTiO 3 , CaMnO 3 , and Ca 2 Fe 2 O 5. The introductions of TiO 2 and MnFe 2 O 4 significantly improve the cyclic stability and optical absorption property of APW in 30 cycles. The co-modified APW (the mass ratio for CaO:TiO 2 :MnFe 2 O 4 = 100:5:5) possesses high sintering resistance, energy storage, and optical absorption capacities in 30 cycles. The energy storage conversion and capacity of the co-modified APW are 0.72 and 2288.57 kJ/kg after 30 cycles, respectively. The optical absorptance of the co-modified APW reaches 49%, which is 9.25 times as high as that of APW. CaTiO 3 and CaMnO 3 effectively mitigate the sintering of CaO grains. CaMnO 3 and Ca 2 Fe 2 O 5 significantly increase the optical absorptance of APW. The co-modified APW possesses stronger basicity and more oxygen vacancies, which is favourable for the carbonation reaction. Thus, TiO 2 /MnFe 2 O 4 co-modified APW is a good energy storage material. • TiO 2 /MnFe 2 O 4 co-modified papermaking waste is used for CaO-CaCO 3 energy storage. • The composite mainly consists of CaO, MgO, CaTiO 3 , CaMnO 3 , and Ca 2 Fe 2 O 5. • The composite has high and stable energy storage and optical absorption capacities. • The energy storage density of the composite is 2288.57 kJ/kg after 30 cycles. • The composite has high sintering resistance, stronger basicity, and oxygen vacancy. [ABSTRACT FROM AUTHOR]

In recent decades, the use of fossil fuels has had a harsh impact on the climate, and the frequency and intensity of various extreme weather events have increased, which has triggered an increased the use of renewable energy sources and reflection on technological advances. Many countries are trying to promote renewable energy to reduce their impact on climate change, but the impact of national energy policies in the climate risk framework remains poorly understood. Based on the panel data of 84 developed/developing countries around the world from 2006 to 2019, this paper studies and analyzes the impact of renewable energy use on climate risk. The study found that the increase in the proportion of renewable energy use can reduce the climate risk, and this result is still robust after undergoing robustness tests such as changing variables, samples, and research methods. The findings offer an important solution for European countries, where climate risks are most acute. The heterogeneity analysis shows that the higher the level of economic development, population density and the lower the level of incorruptibility, the weaker the inhibitory effect of renewable energy use on climate risk. The mechanism analysis also shows that the increase in the proportion of renewable energy use can reduce climate risk by reducing carbon dioxide (CO 2), methane (CH 4), nitrogen monoxide (NO), PM2.5 emissions, and the proportion of fossil fuel use, but it does not reduce climate risk by increasing biodiversity. In particular, we find that technological progress has not played a role in the use of renewable energy to reduce climate risk, breaking the stereotype. The policy recommendation of this paper is that under the increasing pressure of climate change, the transition to clean energy is an indispensable option, and the need to accelerate the energy transition becomes more urgent. There is a greater need to further protect biodiversity and enhance technological progress. • The increase in the proportion of renewable energy use can reduce the climate risk. • The mechanism is to reduce CO 2 , CH 4 , NO, PM2.5 emissions and fossil fuels use. • The use of renewable energy cannot reduce climate risks by increasing biodiversity. • The impact of renewable energy use on climate risk is heterogeneous. • Technological progress has not played a role in the use of renewable energy to reduce climate risk. [ABSTRACT FROM AUTHOR]

Extant research has highlighted the pros and cons of the use of (a) competition and (b) positive (peer) pressure as two mechanisms for invoking peer effects to bring about long-term behavior change. However, these mechanisms have been studied separately and in different contexts. In this paper, we compare the differential impacts of competition versus positive pressure-induced pro-environmental behavior change in the same target population. This study spans a seven-year horizon between 2013 and 2019 (pre-COVID) during which the workforce of about 2500 employees in the Stephan P. Clark Government Center in Miami, Florida, was split into four groups - one control and three treatment groups. Each treatment group was subjected to (a) a healthy inter-group competition through tracking, benchmarking, and comparing monthly group level electricity saving, and (b) positive pressure through the appointment of champions who encouraged pro-environmental behavior among their group members. Studying these mechanisms concurrently in the same population allows for a nuanced comparison of their differential impacts on pro-environmental behavior change. • In this paper, we compare the differential impacts of competition-induced spillover and supervision-induced peer pressure in affecting pro-environmental behavior change in the same target over a seven-year analysis horizon. • The study spans 2013-2019 during which the workforce of about 2500 employees in a building was split into four groups (one control and three treatment) and was subjected to both peer pressure and healthy competition. • The study spans 2013-2019 during which the workforce of about 2500 employees in a building was split into four groups (one control and three treatment) and was subjected to both peer pressure and healthy competition. • These results have implications for the design of pro-environment campaigns that could leverage peer effects through fostering an environment of intragroup pride and healthy inter-group rivalry sprinkled with intermittent supervisory interventions for making long-term impacts. [ABSTRACT FROM AUTHOR]

The accelerating urbanization, rapid industrial development, and excessive consumption of fossil fuels pose survival challenges such as energy depletion and environmental degradation for humanity. In the context of industrial park development, constructing a low-carbon energy system, increasing the proportion of renewable energy, enhancing energy-level matching, and utilizing heat pumps for deep waste heat recovery are effective approaches to reduce fossil energy consumption and alleviate environmental pressures. Addressing issues such as diverse thermal flows in industrial sites, complex electricity-heat-cooling energy demands, and unclear industrial-building energy coupling mechanisms, this paper proposes a two-stage planning framework, comprising the following five steps: (1) constructing a waste heat utilization system centered around heat pumps, (2) establishing a mechanism for matching heat sources, equipment, and thermal sinks, (3) establishing an energy conversion model and energy quality quantification system, (4) optimizing waste heat utilization path allocation, and (5) conducting a system energy flow analysis. Case studies demonstrate that the proposed system achieves optimized matching of multiple heat sources and sinks in industrial and building scenarios through thermal integration, meeting diverse energy demands in the park, including electricity, cooling, and multi-grade heat. After coupling with traditional steam pipeline networks, the annual total cost and annual steam power consumption decrease by 33% and 39% respectively, with a waste heat contribution rate of up to 26% and a renewable energy penetration rate of up to 25%, and a waste heat recovery system payback period of 6 years. By establishing an energy quality quantification system and conducting multi-objective optimization considering losses and economic costs, this paper provides Pareto frontier solutions, offering references for engineering proposals. The proposed networked waste heat recovery system is characterized by low energy consumption and high economic efficiency, effectively integrating the energy characteristics of industrial parks and demonstrating engineering applicability. [Display omitted] • Focusing on industrial-building energy conjugation issues • Proposing a low-carbon energy system planning framework for industrial parks • Establishing a networked matching mechanism for cold and hot flow streams • Short system recovery cycle, good economic performance • High contribution rates of waste heat and renewable energy, evident low-carbon effect [ABSTRACT FROM AUTHOR]

The objective of this paper is to optimize the energy consumption and performance of fuel cell electric bicycles (FCEBs) under specific key input parameters. The paper applied an integrated method that includes an artificial neural network (ANN) and genetic algorithm (GA) to forecast and identify an optimal performance and energy consumption of FCEBs. The simulation model of FCEBs is established and simulated in MATLAB-Simulink environment to generate 1000 data points, that are used for training, validating, testing artificial neural network, the ANN architecture containing five input neurons, two hidden neurons and two output neurons, respectively. Furthermore, the GA is integrated to find the maximum performance and energy consumption once the ANN has exactly been trained. The study found that the FCEB configuration can achieve an effective performance at 30.3 km/h with required power of 210.4 W under speed level_5, radius of wheel 0.39 m, frontal area 0.423 m2, slope grade 0%. In order to validate and verify the simulated results, the experimental approach method was conducted in the same condition. The experimental results fit well with the simulated results in the same initial input parameters. • A method integrating the artificial neural network with genetic algorithm is applied. • The consumed power and fuel cell voltage are optimized by combining artificial neural network and genetic algorithm (ANN-GA). • The effective performance area of fuel cell electric bicycle under various a structure and operating parameters is identified. • Deep-learning results reflect major physical mechanism of fuel cell electric bicycle operation. [ABSTRACT FROM AUTHOR]

As the renewable energy consumption responsibility weight system is gradually implemented in various provinces, there is a closer intersection between the excess consumption and green certificates trading. Existing trading platforms can only meet the needs of green certificates trading. This single-platform solution is no longer sufficient to meet the trading requirements under this system. Consequently, this paper proposes a excess consumption and green certificates trading platform based on blockchain technology. This platform utilizes the decentralized, open, and anonymous characteristics of blockchain technology and rely on its smart contract capabilities to simultaneously meet the comprehensive trading needs of surplus consumption and green certificates trading through combining user-initiated transactions with platform-intelligent recommendations. It adapts to the complex excess consumption and green certificates trading market that has emerged following the issuance of the renewable energy consumption responsibility weighting policy. To conduct simulated transactions, 16 groups of buyers simulate a total of 215,792 excess consumption vouchers and 143,861 green certificates in this paper. The transaction results all meet the expected transaction scenarios under the conditions of smart recommendation, demonstrating the platform's transaction feasibility. [Display omitted] • Design a blockchain-based smart contract solution for volume consumption trading and green certificate trading. • Build a database containing 215,792 excess consumption vouchers and 143,861 green power certificates. • Simulate the purchase of 160 buyers by establish a transaction platform. • Analyzed the application direction of the data produced by the trading platform [ABSTRACT FROM AUTHOR]

The motivation of this paper is to investigate the resistance of countries' energy research and development (RD&D) expenditures to random shocks. The analysis includes the five countries (France, Germany, Japan, the United States, and the United Kingdom) that are the biggest investors in RD&D in fossil fuels, renewables, energy efficiency, and nuclear energy. Thus, economies will be able to take precautions against global shocks in producing sustainable energy policies. To achieve this aim, this paper uses the artificial neural network approach, which uses a distributed computing model that can store and generalize data after a learning period. Empirical results widely depend on countries and distinct energy technology policy fields. The key findings provide evidence that RD&D expenditures, except for renewables, do not tend to mean revert. The economies of Japan, Germany, and the United States should make more renewable investments to reduce the resistance of renewable energy sources to shocks and thus produce policies for both environmental sustainability and energy security. The economies of France and the United Kingdom can ensure energy security by continuing their sustainable energy policies. • Applied SDG policies focused on energy technology RD&D are presented. • The stochastic characteristics of energy technology investments are examined. • Carbon-reducing policies are recommended for the top five economies. • Energy technologies are perused through artificial intelligence approach. [ABSTRACT FROM AUTHOR]

The energy transition towards sustainable resources is more urgent than ever given the environmental and geopolitical challenges. Being one of the major energy users, cities need to understand their energy sector to accomplish its transition, by means of data. However, data are not easily accessible and have their own challenges. This paper presents a joint effort between researchers, city representatives and industry to provide an urban system service that supports research, accelerates urban innovation, and involves the community. An energy data portal, "NRGYHUB", has been developed, where hourly data from thousands of energy meters are available. These meters were collected from neighborhoods in the city of Västerås, Sweden, and they measure electrical and heating energy. In addition, the data are complemented by geometrical and non-geometrical information of the buildings, as well as demographic statistics of the areas. The paper describes the process of data collection, preprocessing, and visualization, in addition to the main challenges and limitations of the project. This dataset can be used for energy use benchmarking, prediction, and analysis. • The creation and implementation of an energy data portal is detailed and made available on nrgyhub.mdu.se. • Legal and licensing issues in data sharing are explored, offering insights for those interested in Sweden and beyond • By showcasing real-world problems, the impact and role of this data sharing initiative are demonstrated. [ABSTRACT FROM AUTHOR]

An effective way to promote the consumption of renewable energy resource generation is by forming a joint power supply system between photovoltaic (PV) power plants widely distributed along a river basin and large-scale cascade hydropower plants, using shared transmission lines to transmit power to the power grid system. However, renewable energy resource generation has significant prediction uncertainty and can flood into the power grid, which is detrimental to its safe and stable operation. To solve the above issues, this paper proposes an improved interval optimization method to model the uncertainties of the inflow runoff of a cascade hydropower plant and the photovoltaic power output. On this basis, a medium- and long-term interval optimization scheduling model is established for a cascade hydro-PV complementary system based on extreme scenarios. This model does not need to obtain an accurate probability density distribution for renewable energy, and can realize the overall optimization of runoff-PV uncertainty scenarios within a certain range, taking into account the economy and robustness of system operation. In order to ensure the solution efficiency, the original model is transformed into a mixed integer linear programming (MILP) model by a variety of deterministic transformation methods and linearization techniques. The case study shows that: 1) Under the premise that the system power output is relatively stable, the power curtailment of the interval optimized scheduling scheme proposed in this paper is reduced by 47.5% compared with the robust scheduling scheme. The ability to cope with extreme scenarios is also significantly improved compared with the deterministic scheduling scheme. 2) There is a game relationship between the robustness and economy of the obtained scheduling scheme. When the fluctuation interval width of random variables increases from 20% to 30% and 40%, the corresponding total power generation decreases by 2.4% and 4.7%, respectively. 3) A large penalty factor is conducive to reducing the amount of abandoned hydropower, but in general, the penalty factor and ecological flow level have no obvious influence on the dispatching results, and the values of both can be reasonably determined according to the actual operation requirements. • An improved interval optimization method is proposed to deal with the uncertainty of inflow runoff and PV power output. • A MILP model for the medium- and long-term operation of a cascade hydro-PV complementary system based on extreme scenarios is established. • The resulting scheduling scheme achieves balance between economy and robustness. • The influence of penalty factor and ecological flow on the dispatching results is not obvious. [ABSTRACT FROM AUTHOR]

Forecasting energy demand has become increasingly important due to technological advances, especially new power systems and population growth. Accurate predictions of energy demand and supply are crucial for academics and policymakers. Also, energy consumption is non-stationary and dynamic in time, requiring an adaptive forecasting algorithm. This paper presents a new adaptive hybrid approach for energy time series forecasting using statistical methods. Some of the most popular energy demand time series applications are used to demonstrate the superiority of the proposed algorithm, which covers a wide range of critical energy demand forecasting situations at various scales. The paper's objectives are presented in three phases. In Phase I, ARFIMA is used to forecast the entire original time series as a statistical inspector and later for comparison. Although ARFIMA's fractionality feature helps to capture long and short-term memory behavior in time series, to be more adaptive and become close to a nonlinear algorithm that can handle non-stationarity, and Gaussian and non-Gaussian time series closely, a novel dynamic statistical structural break detection framework is developed, and used in phase II to identify the time series' change points and associated time indexes. Since time series are partitioned based on structural change detections, they approach one in terms of the Hurst exponent and exhibit pure long memory, which is ideal for ARFIMA modeling. Phase III captures non-stationary statistical properties and memory characteristics by applying adaptive ARFIMA modeling to segmented time series. Finally, the predicted partitions are concatenated. Various performance assessment metrics, e.g., Mean Absolute Percentage Error (MAPE), tested on the final achieved results show that the proposed adaptive algorithm outperforms the forecasting capabilities of the existing algorithms on the same energy demand time series used in the current paper. MAPE of the proposed approach for the four utilized real-life cases are 1.72%, 1.35%, 0.22%, and 4.4%, respectively. Therefore, the proposed model is a satisfactory method for energy demand forecasting due to its high accuracy. • A novel adaptive hybrid algorithm is developed for energy demand forecasting. • The prediction system uses ARFIMA and a novel dynamic structural break detection framework. • The adaptive prediction method can forecast energy demand with high accuracy. • The structural break detection works dynamically, allowing ARFIMA to be adaptive. • The prediction method captures the energy time series' nonstationary statistical features. [ABSTRACT FROM AUTHOR]

Local electricity markets (LEMs) such as peer-to-peer (P2P) and community-based markets allow prosumers and consumers to exchange electricity products and services locally. In order to coordinate electricity trading and flexibility services, this paper proposes a hierarchical prosumer-centric market framework with a hybrid LEM and a local flexibility market (LFM). Multi-cut Benders decomposition (MCBD) is employed to decompose the integrated hybrid LEM into a centralized P2P market and multiple community-based markets. The aggregators coordinate energy sources and demands of households in low voltage (LV) distribution networks (DN) as virtual power plants (VPPs) and engage in trading through a P2P market over the medium voltage (MV) DN. In addition, a modified MCBD (M-MCBD) approach is proposed to accelerate the convergence process. The LFM is operated by the distribution system operator (DSO) and is formulated as a mixed-integer nonlinear programming (MINLP) problem which is further relaxed to a mixed-integer second-order cone programming (MI-SOCP) problem. The case study demonstrates that aggregators were able to collaborate on trading within the hybrid LEM to minimize the costs incurred by prosumers within the network. Furthermore, the proposed M-MCBD method improves the scalability of the MCBD by enhancing its convergence speed and accuracy, as demonstrated by testing on problems of varying scales. • A hierarchical market framework is designed comprising a hybrid LEM and an LFM. • The hybrid LEM combines a P2P market and community-based markets with VPPs. • The P2P market and community-based markets are coordinated by a modified MCBD. • The LFM is formulated as an MI-SOCP problem, with VPPs providing flexibility service. • VPPs bid block orders so that the operational characteristics of DERs are captured. [ABSTRACT FROM AUTHOR]

Sensitivity analysis has been widely used in building energy analysis to identify key variables influencing building energy and carbon emissions. However, most previous studies only focus on the single time scale energy use of buildings when conducting sensitivity analysis. The multiple time-scale sensitivity analysis would lead to increased complexity and challenges in building energy analysis. This paper proposes a new systematical procedure for global variance-based sensitivity analysis of multiple time-scale energy use of buildings. A case study of an office building is used to demonstrate the application of this approach using the Bayesian adaptive spline surface (BASS) models at three different time scales (annual, monthly, and daily). The results indicate that the procedure proposed here can provide fast and reliable sensitivity results for the multiple time-scale building energy assessment. The BASS learning models have the advantages of high predictive performance and the fast computation of sensitivity indicators in a closed form without Monte Carlo integrals. The application of principal component analysis can deal with the highly correlated multi-output energy use at a smaller time scale, which can further reduce computational costs. Moreover, the sensitivity analysis at the different time scales can provide new insights into energy characteristics due to the intrinsic variations of weather conditions. This systematical procedure can provide useful guidance for the multiple time-scale model calibration and multi-step ahead predictions of buildings. Moreover, the method proposed here can be extended to the sensitivity analysis of energy use in different time scales (sub-hourly, hourly, or daily) for other energy systems (such as PV, solar thermal, and wind). • Bayesian adaptive spline surfaces (BASS) in sensitivity analysis of building energy. • Multiple time-scale sensitivity analysis of buildings using BASS models. • Building energy assessment using principal component analysis and BASS. • Reduce computational time for sensitivity analysis of building energy using BASS. [ABSTRACT FROM AUTHOR]

With the high penetration of renewable generation systems in the power grid, the accurate simulation of the uncertainty in renewable energy generation is vital to the safe operation of the power system This paper proposes a novel controllable method for renewable scenario generation based on the improved VAEGAN model. The standard VAEGAN model is first improved using spectral normalization technique and the generator of GAN is trained using VAE. Then, the external and internal interpretable features in the latent space are learned as the controllable vector utilizing the principle of mutual information maximization. Finally, the renewable energy scenarios with overall features are generated using the external universal meteorological features, and renewable energy scenarios with specific features are generated by tuning along the internal interpretable feature of the controllable vector in the latent space. The proposed approach is used to produce real-time series data for renewable energy including wind and solar power. Experiments demonstrate that our method has a better performance in terms of controllable generation and enables the generation of preference patterns covering various statistical features. • A novel VAEGAN model with controllable interpretable features is proposed. • External universal meteorological features are used to generate scenarios with unknown patterns. • Internal interpretable latent features are designed to generate scenarios with specific features. • The results show a better performance of the proposed method on controllable scenario generation. [ABSTRACT FROM AUTHOR]

The ever-intensifying threat of climate change renders the electric power system undergoing a profound transition toward net-zero emissions. Energy efficiency measures, such as demand response, facilitate the transformation to jointly relieve consumers' financial burden and improve the operability of the electric power grid, in a carbon-free way. In this paper, we design a cluster-based appliance-level-of-use demand response program, based on the massive volume of appliance consumption data, to expand the role demand response can play in the power grid's low-carbon transition. We systematically model the appliance-level utility function to distinguish consumers' distinct consumption patterns. We then develop a bi-level optimization model to capture the interactions between individual consumers and a distribution system operator (DSO) and enable appliance-level-of-use demand response functions. To further improve the efficiency and scalability of the proposed mechanism, we propose a cluster-based approach to capture the heterogeneity of users based on their energy consumption behaviors. Simulation results show that by capturing the detailed appliance-level response patterns, the proposed approach can systematically improve overall social welfare compared with conventional demand response mechanisms. • Data Empowered Appliance-level Utility Modeling. • Demand Response Design to Offer Appliance-level Incentive. • Heterogeneity Characterization to Improve Scalability and Efficiency. [ABSTRACT FROM AUTHOR]

This paper presents a new prosumer-centric peer-to-peer (P2P) energy trading framework incorporating the network-secure export–import limits, known as dynamic operating envelope (DOE), for prosumers considering their preferences to trade in the local market. In the proposed framework, a DOE-integrated energy management algorithm is developed for prosumers considering electric vehicles (EVs) charge–discharge and photovoltaic (PV) systems. The framework allows prosumers to operate within defined DOE, aligning with the preferences of EV-owning prosumers by managing the desired EV battery charge levels at their departure. An auction-based P2P energy trading mechanism for prosumers is proposed incorporating the allocated DOE to ensure secure network operation and valuing prosumers' preferences to benefit them. The proposed framework is implemented on a 78-node low-voltage (LV) residential distribution network to evaluate its performance. The results and comparative analyses verify the effectiveness of the proposed framework in addressing network issues such as voltage and line congestion problems, meeting prosumers' preferences in asset management, and providing benefits to all participants in the energy trading process. • A prosumer-centric P2P energy trading using network-secure export–import limits. • Hybrid DER marketplace model-based framework consisting of the DSO and the DMO. • Energy management within the limits considering EVs charge–discharge and PV systems. • DOE-integrated Double auction-based market mechanism for P2P energy. • Fairness in allocating DOEs with high RPI, PIEI, QoS, QoE and MiM values. [ABSTRACT FROM AUTHOR]

With the development of prosumers, peer-to-peer (P2P) energy transactions have become possible and emerged as a research focus. However, global information cannot be obtained in the P2P energy market, which results in the inability to consider network physical constraints during the trading process. As a result, the operational risks may exist in the system due to the opportunistic behaviors. To this end, this paper proposes a dual-layer game optimization method between the distributed system operator (DSO) and prosumers involving the risk price guidance mechanism in the P2P energy market. Specifically, the upper and lower layers meet the privacy requirements of each participant through limited information sharing. Then, the concept of risk price is introduced to guide prosumers' P2P energy transactions. The upper and lower layers continuously adjust their strategies, and the risk of congestion is mitigated when the game achieves equilibrium. This ensures a balanced consideration of system security and the economic interests of all participants. Additionally, a C-ADMM method with adaptive penalty factor is introduced for solving the equilibrium of the distributed P2P energy market, promoting supply-demand balance and enhancing energy efficiency while protecting privacy. Moreover, the solution efficiency is improved compared to standard ADMM methods. Case studies on an modified IEEE 33-node system validate the effectiveness of the proposed model and method. • A DSO-prosumers dual-layer game framework based on pricing guidance in the P2P energy transaction is presented. • A definition for the risk price in P2P energy transactions is provided to guide prosumers' trading behaviors. • C-ADMM with adaptive penalty factor is employed to expedite convergence in solving the P2P energy transaction model. • A method of progressively contracting the operating boundaries is introduced for accelerating the solution of game model. [ABSTRACT FROM AUTHOR]

In recent years, the potential of Solid oxide fuel cell (SOFC) technologies as energy conversion devices with high efficiency and zero‑carbon emissions has been underestimated, where high fuel utilization plays a crucial role. Although the SOFC system with anode off-gas single recirculation has received much attention as a means to increase fuel utilization, this problem is not thoroughly addressed. To overcome this limitation, this paper proposes a novel SOFC system concept featuring anode off-gas "dual" recirculation, designed to maximize fuel utilization up to the theoretical limit of 100%. This innovative approach inherently eliminates carbon dioxide emissions through an integrated carbon capture process, thereby maintaining systematic carbon balance. A comparative analysis among the novel dual recirculation system, traditional single-pass, and other anode off-gas recirculation systems, reveals that the proposed system outperforms existing configurations. It achieves electrical and overall combined heat and power efficiencies of 49.6% and 85.7%, respectively, even after accounting for the energy required for carbon capture. This represents a 21.5% increase in electric efficiency over the single recirculation system, with a six-fold increase in tail-gas CO 2 concentration, reaching 26.3%. The study categorizes the four analyzed systems into "open" or "closed" based on whether the anode off-gas is directly discharged into the environment. Systematic investigations into carbon deposition potential, fuel utilization, flow rate, operating voltage, carbon capture ratio, and condensation temperature disclose distinct patterns between open and closed systems. The closed configurations exhibit superior performance, suggesting they are more suitable for SOFC applications. [Display omitted] • Merit of fuel utilization to SOFC systems is reevaluated. • Novel SOFC system with anode off-gas dual recirculation is proposed. • The system achieves systematic fuel utilization of 100%. • The system achieves superior energy and carbon capture performance. • Introduced "open" and "closed" SOFC system categories. [ABSTRACT FROM AUTHOR]

Single hydrogen production methods cannot meet the stable hydrogen demand for many engineering applications under carbon emission requirements. This paper proposes a hydrogen energy hub (HEH) for stable and green hydrogen production from variable renewable energy inputs. The HEH integrates water electrolysis, biomass gasification, and natural gas reforming, which are coupled and coordinated with complementary utilization of both materials and energy. The uncertainties associated with biomass moisture content (MC) and photovoltaic (PV) generation for hydrogen production are considered. The impact of MC on the production rate of biomass is quantified and embedded in a thermodynamic equilibrium model, and inaccurate PV forecasts are also taken into account. A systematic model of HEH is developed to improve the economic benefit of system operation while providing probabilistic guarantees on the robustness of stable hydrogen production. A double-loop robust algorithm is adapted to efficiently solve the robust model, with the outer loop developing a day-ahead scheduling scheme and the inner loop figuring out the worst-case scenario. Finally, the effectiveness of the proposed model is demonstrated through case studies in terms of cost reduction, decision robustness, and computational efficiency. A 9.9% improvement in energy efficiency can be achieved through complementary utilization. The robust optimization is able to achieve an average total cost reduction of 37.52% over the deterministic optimization in 1000 random scenarios. • A hydrogen energy hub integrating electrolysis, gasification, and reforming is proposed. • A 9.9% energy efficiency increase by using material and energy complementarity. • A two-stage scheduling model and robust optimization approach are proposed. • The uncertainties in PV generation and biomass MC for hydrogen production are considered. [ABSTRACT FROM AUTHOR]

Digital transformation has been regarded as a primary styrategy to promote transitions in diverse fields, but industry pioneers believe that the existing barriers may hamper the speed of digital transformation. Hence, this paper presents a synthetical decision model integrating the weighted Heronian mean aggregation (WHMA) operator, the Level-Based Weight Assessment (LBWA) model, the CRITIC (criteria importance through intercriteria correlation) method, and the Ranking of Alternatives through Functional mapping of criterion sub-intervals into a Single Interval (RAFSI) model with Fermatean cubic fuzzy sets to evaluate the barriers to digital transformation implementation in energy transitions with unknown weights of experts and criteria. In this framework, an extended WHMA operator with the deviation-based method is established to fuse experts' preference information. The LBWA model and CRITIC method with FCF setting are combined to derive the weights of barriers. Next, these methods are incorporated into the RAFSI model to analyze these barriers. A numerical example of evaluating barriers to digital transformation implementation in the power sector displays the application of the RAFSI model-based decision method. The result reveals that a 3 "Equipment manufacturer" (0.7063) has the highest barrier level, and a 4 "Consumers of smart power electronic" (0.4391) have the lowest barrier level. After that, sensitivity and comparative explorations are applied to examine the feasibility and reliability of the synthetical model. The results show that the proposed model can provide a more practical and stable evaluation result for supporting the decision of stakeholders associated with ET. • This study identifies a structure of barriers to the implication of the digital economy in achieving energy transition. • A synthetical decision model integrating the weighted Heronian mean aggregation operator is presented. • The RAFSI model with FCF is proposed to evaluate the barriers of digital transformation implementation in energy transition. [ABSTRACT FROM AUTHOR]

Energy demand from the built environment is among the most important contributors to greenhouse gas emissions. One promising way to curtail these emissions is through innovative energy management systems (EMS's). These systems often rely on access to real-world demand data, which remains elusive in practice. Even when available, energy demand data typically suffers from missing data as well as many irregularities and anomalies. This precludes the application of many off-the-shelf machine learning algorithms for time series analysis and modelling, necessary for downstream energy management. Transforming energy demand time series to low dimensional feature matrices has been shown to work well in determining similar buildings and predicting meta-data, both of which can be used to create better forecast algorithms used as input in EMS's. These studies are, however, often marred by the limited size of datasets, as well as the non-interpretable nature of extracted features. This paper addresses these concerns and makes several important contributions: (1) it collates several open-source datasets to create a large meta-analysis dataset containing energy demand data for over 13,000 buildings; (2) it investigates the use of different interpretable feature extraction methods on this collated dataset; and (3) it shows that this feature matrix can be used more generally to determine similar buildings and predict building properties such as missing meta-data. The large feature matrix resulting from the work is open-sourced as part of a web-based dashboard to enable the community to reproduce and further develop our results. • A large building energy demand dataset containing over 13,000 buildings is created. • Different interpretable time series feature extraction methods are investigated. • Features show considerable discriminative power in detecting similar buildings. • Extracted features can be used to predict missing meta-data in building datasets. [ABSTRACT FROM AUTHOR]

Investing in energy efficiency measures is a major challenge for SMEs, both for environmental and economic reasons. However, certain barriers often make it difficult to invest in such measures. Although public financial support helps to overcome economic barriers, public bodies face the challenge of identifying which SMEs display the greatest potential to invest in energy efficiency measures. By applying a random forest technique and by using sampling balancing techniques, this paper identifies the profile of industrial SMEs that might be potential beneficiaries of public aid, thereby helping public institutions to target their calls and direct their efforts towards this group of SMEs. Specifically, liquidity and indebtedness are found to be the most useful predictors for SMEs in the industrial sector. The results are robust and reveal that applying a random forest approach for unbalanced samples offers greater predictive capacity and statistical power than applying traditional estimation techniques. By identifying potentially benefiting firms, this work helps to boost the effectiveness of public subsidies and to improve the channeling of public funds, which ultimately favors investment in energy efficiency. • Public subsidies favor energy efficiency measures by reducing the up-front cost and making the investment more profitable. • Subsidy effectiveness depends on the capacity to identify which SMEs are potential beneficiaries of energy subsidies. • We evidence that applying a random forest approach for unbalanced samples offers greater predictive capacity and statistical power than traditional techniques. • The most useful predictors for SMEs in the industrial sector are related to liquidity and indebtedness. [ABSTRACT FROM AUTHOR]

Multi-energy systems with carbon capture system (CCS) and power to gas (P2G) can reduce carbon emissions while increasing the consumption of renewable energy. This paper proposed a long-term equilibrium including electricity, gas and carbon markets to study the price effect of the system and its impact on the carbon-gas- electricity sector. The simulation results indicate that the main impact of the system on the electricity sector is to reduce energy curtailment and provide flexible resource for the electric system. P2G used an excess of 22.21 TWh of renewable energy, while CCS used 2.65 TWh of electricity to operate the capture system. The multi-energy system will reduce the market clearing price in the gas market (the annual average gas price decreased from 276.90 to 276.30 yuan/MWh). However, the partial transfer of flexibility to the electricity sector may increase cost in the gas industry, which in turn will be transferred back to the electricity sector again. In addition, through the operation of multi-energy system, carbon elements will circulate in the three sectors. CCS will become a carbon price-maker when electricity scarcity and carbon quota tightening, and increase carbon prices, which will increase the utilization hours of CCS and P2G and their profitability. • A carbon-gas-electricity market coupling model is proposed. • The multi-energy system will reduce the market clearing price in the gas market. • The partial transfer of flexibility may increase cost in the gas industry • CCS will become a carbon price-maker when electricity scarcity. [ABSTRACT FROM AUTHOR]

This paper explores the viability of utilizing agricultural biomass-based energy potential, employing mathematical, engineering, and economic modeling techniques. Moreover, the potential of a biogas-based co-digestion (CD) system, integrating its techno-economic performance and environmental sustainability in terms of electricity generation, has also been studied. In this investigation, the categorization of 25 different plant species into two groups: arable field crops (AFCs) and horticultural plants (HPs), was performed. Data was collected during the 2021‐–2022 cropping season in Bangladesh from various sources, including literature reviews, governmental, and non-governmental organizations. The findings revealed that the available agricultural biomass residues, totaling 1,02,585.75 KT, have the capacity to generate 1,33,815 million m3/year of biogas. This energy potential corresponds to 291,125.85 TJ/year or 9231.60 MW of electricity, which can fulfill 88% of the national total energy demand. In terms of levelized cost, the proposed approach is more competitive and shows a greater promise compared to other technologies. Furthermore, it demonstrates environmental friendliness by reducing CO 2 emissions by 156 tons at a cost of $7/ton while earning $1092 annually from the potential carbon-credit market. This approach presents a potential solution to address Bangladesh's energy crisis. The payback period of the system ranged from 2.93 to 3.75 years, with and without the inclusion of a slurry, respectively. The recommended methods hold significant promise for meeting national energy demands. A case study was provided as a proof-of-concept (PoC) to validate the approach. This study is the first of its kind, providing valuable insights into the renewable energy potential in Bangladesh. The results will assist policymakers in formulating sustainable energy policies. • Mathematics, engineering, economics and environmental modeling explored renewable energy. • Techno-economics and environmental sustainability validated the proposed methodology. • Bioenergy-based electricity could supply 88% of the national energy demand of Bangladesh. • A case study was provided as a proof-of-concept (PoC) to validate the approach. [ABSTRACT FROM AUTHOR]

Shared energy storage is widely recognized as an energy hub for the coordinated operation of regional integrated energy systems (RIESs). Multi-energy systems (MESs) share centralized energy storage to store excess renewable energy sources (RESs). This paper proposes a novel energy-sharing framework considering hydrogen trading, which is suitable for residential, industrial, and commercial RIES structures. Shared energy storage operator (SESO) promotes hydrogen energy transactions by formulating time-of-use (TOU) hydrogen prices. The proposed hydrogen energy trading method can be regarded as a master-client structure, and a hierarchical optimal scheduling method based on the Stackelberg game relationship is designed. Finally, a case study is performed based on an optimal scheduling algorithm combining particle swarm optimization (PSO) and mixed integer linear programming (MILP). The cases show the electricity‑hydrogen shared energy storage mechanism in RIESs can improve the RESs utilization rate and effectively reduce the operating costs of each system. Moreover, compared with RIESs with a single centralized electric energy storage, the TOU hydrogen price mechanism can further lower the energy prices and improve the economy of the RIES. The cases show that hydrogen energy sharing reduces the operating cost of RIES by 9.96% and increases the regional energy utilization rate by 2.97%. And the shared energy storage business model can satisfy the economy of both SESO and RIES. It confirms the rationality of the electric hydrogen shared energy storage project. • A sharing energy storage mechanism in multi-energy systems is presented in this paper. • The hydrogen trading methods based on time-of-use hydrogen prices are considered in this paper. • A hierarchical optimal scheduling method based on the Stackelberg game is designed. [ABSTRACT FROM AUTHOR]

This paper proposes a novel method for integrating renewable energy sources (RES) and power-to-gas (P2G) technologies to optimize energy utilization efficiency as RES capacity increases. The method introduces the potential RES penetration index (PRPI) to select the appropriate capacity of P2G facilities for improved RES acceptance rates. In order to establish input constraints for RES and P2G facilities, this study determines the saturation point of RES (R-SP) and the saturation point of P2G (PG-SP). Additionally, the paper introduces the marginal capacity rate of RES to P2G (MCRG) as a useful tool for evaluating the adequacy of planned facilities. This paper's index is limited to PV as a renewable energy source. By incorporating PRPI into the input plan of P2G facilities, the proposed method improves PV's acceptance rate, contributes to facilities' economic planning, and streamlines optimization complexity. Previous studies have demonstrated the potential for P2G technology to optimize the integration of PV into the grid. However, the proposed method considers the PV's acceptance rate and provides system planners with necessary information on RES and P2G facility capacity. The method proposed in this paper can be extended to include other RES. • Novel Index for PV-P2G integration (PRPI). • Enhancing Acceptance rate of PV applying PRPI • Reduced optimization complexity. • Adaptable to various renewables. [ABSTRACT FROM AUTHOR]

Existing data-driven models of building energy consumption have incorporated solar irradiance as a covariate without accounting for key physical constraints, leaving room for improvement in model performance and interpretability. In this paper, we propose the Time-Of-Week, Solar and Temperature (TOWST) model for quantifying building energy consumption. This new model incorporates solar gain into the well-known Time-Of-Week and Temperature (TOWT) model by accounting for important physics constraints, including, building orientation and the opposite impact of solar gain on heating and cooling. An iterative algorithm is developed to cluster the energy demand into heating and cooling categories, identify building orientation, and estimate the unknown model parameters. The model is applied to datasets generated from a building simulation according to international standard ISO 52016-1:2017, for a range of buildings types and locations. Results show a 30%–72% reduction in mean squared error relative to the TOWT model, across a range of different climatic conditions, demonstrating the significance of accounting for solar gain in a physically meaningful way. • Data-driven building energy model incorporating the physics of solar gain. • Identifies building orientation to capture the irradiance received by a building. • Infers heating and cooling hidden states to model the physical dependence. • Significant improvement in model fit across range of climatic conditions. [ABSTRACT FROM AUTHOR]

Air-conditioners (ACs) can fully utilize the inherent characteristics of storing heat/cold in demand response (DR), achieving peak load shifting and renewable energy consumption. However, traditional control strategies based on compressor ON/OFF state require retrofitting of the internal components of ACs, making it challenging to implement directly through ACs' infrared control protocol. Given the widespread availability of infrared temperature-set-point (TSP) adjustment functions in existing ACs, this paper proposes a day-ahead optimal scheduling strategy of aggregate ACs under TSP control. Based on the second-order equivalent thermodynamic parameter (ETP) model, the TSP adjustment characteristics are considered to establish the equivalent energy storage (EES) model of ACs. On this basis, taking the overall optimization objectives of power system into account, the optimal scheduling model of aggregate ACs under TSP control is established to solve collaborative optimization problems for power generation and consumption. Case study demonstrates that, compared to optimal scheduling models based on traditional EES model, the proposed model exhibits superior peak load shifting effects and allows for smooth control of ACs through the issuance of control commands. • An optimal scheduling model of aggregate air-conditioners based on equivalent energy storage model is established. • Discrete temperature-set-point control realized through air-conditioners' infrared control protocol. • The aggregate air-conditioners' energy storage capacity and their potential in demand response are enhanced. [ABSTRACT FROM AUTHOR]

Reasonable road design can not only improve traffic efficiency, ensure driving safety, reduce construction costs, but also reduce the energy consumption of road transportation. However, existing road design research mainly focuses on safety, efficiency, and economic factors, with few studies considering the actual construction difficulty as well as energy saving and emission reduction of transportation. To fill the research gap, this paper proposes a longitudinal slope design method for highway sections that considers both vehicle fuel consumption minimization and construction feasibility. First, the passenger car trajectory data and fuel consumption data from the Beihuan Highway in Guangzhou, Guangdong Province, China were collected, and the optimal combination features of the random forest algorithm were extracted using parameters such as vehicle operating conditions and road grades, thus establishing a fuel consumption estimation model for passenger cars on highways. Second, by combining the fuel consumption estimation model with dynamic programming algorithm, an ecological speed planning model for passenger cars on highways was developed. Finally, for the scenario of ecological driving of intelligent vehicles, a fuel-efficient slope design (FSD) method was proposed based on the Nested Monte Carlo Tree Search algorithm, and the best fuel-efficient slope design was selected considering the balance of cut and fill factors. The results show that FSD can reduce the fuel consumption of passenger cars on the section by about 4.50%–6.52%; the fuel-efficient slope design considering the balance of cut and fill not only can reduce the fuel consumption of passenger cars on the section by about 5.21%, but also has the advantage of lower engineering volume. The research results conduce to establish a theory and standards for fuel-efficient slope design of highways suitable for ecological driving scenarios of intelligent vehicles, which can reduce the trip fuel consumption of highway traffic flow in the long run while considering traffic efficiency, and have great significance for reducing carbon emissions, saving travel costs, and protecting non-renewable resources. • The study proposes a fuel-efficient longitudinal slope design method for highway. • The method can reduce the fuel consumption of a passenger car by about 4.50%–6.52%. • The concave curve is effective in reducing fuel consumption for passenger cars. • Considering the balance of cut and fill makes the slope scheme more fuel-efficient. [ABSTRACT FROM AUTHOR]

Deep Reinforcement Learning (DRL) has emerged as a promising approach to address the trade-off between energy efficiency and indoor comfort in buildings, potentially outperforming conventional Rule-Based Controllers (RBC). This paper explores the real-world application of a Soft-Actor Critic (SAC) DRL controller in a building's Thermally Activated Building System (TABS), focusing on optimising energy consumption and maintaining comfortable indoor temperatures. Our approach involves pre-training the DRL agent using a simplified Resistance-Capacitance (RC) model calibrated with real building data. The study first benchmarks the DRL controller against three RBCs, two Proportional-Integral (PI) controllers and a Model Predictive Controller (MPC) in a simulated environment. In the simulation study, DRL reduces energy consumption by 15% to 50% and decreases temperature violations by 25% compared to RBCs, reducing also energy consumption and temperature violations compared to PI controllers by respectively 23% and 5%. Moreover, DRL achieves comparable performance in terms of temperature control but consuming 29% more energy than an ideal MPC. When implemented in a real building during a two-month cooling season, the DRL controller performances were compared with those of the best-performing RBC, enhancing indoor temperature control by 68% without increasing energy consumption. This research demonstrates an effective strategy for training and deploying DRL controllers in real building energy systems, highlighting the potential of DRL in practical energy management applications. [Display omitted] • Implementation of SAC as a continuous action thermostatic controller. • SAC pre-trained in simulation before the deployment in a real-world office. • Development of a benchmarking strategy to compare DRL and RBC in real deployment. • Reduced temperature violations by 68% maintaining the same energy consumption. • Discussing practical DRL controller deployment challenges. [ABSTRACT FROM AUTHOR]

Indirect evaporative cooling has garnered considerable attention and research owing to its notable advantages, especially high cooling efficiency and low energy consumption. However, the complexity and diversity of parameters affecting indirect evaporative cooler (IEC) performance necessitate the development of a fast and efficient performance prediction model, which remains a critical research objective. To address the particular challenge, this paper introduces a novel approach that utilizes the principles of neural network theory to construct a predictive model based on backpropagation artificial neural networks (BP-ANN). The developed model is employed to investigate the impact of six main operating parameters of the water spray system on the IEC performance. Wet-bulb efficiency and pressure drop of secondary air channel are utilized as the performance evaluation indexes. The model is rigorously validated by relevant experimental data, enabling a comprehensive analysis of the influence of each parameter on the operational performance of the whole system. The significance of the influential parameters is evaluated through grey relational analysis. Furthermore, a multi-objective optimization approach employing a genetic algorithm (GA) is introduced to effectively determine the optimal operating parameters of the IEC system. The results demonstrate that the whole system can efficiently operate with low energy consumption when the wet-bulb efficiency and pressure drop weights are balanced. The optimal operating parameters include a nozzle pressure of 0.15 MPa, spacing of 85 mm, aperture of 6 mm, count of 11, spray density of 0.85 kg/(s ∙ m2) and air velocity of 2 m/s, at which time the wet-bulb efficiency was 0.85, the pressure drop was 210 Pa, and the coefficient of performance (COP) was 12.4, which demonstrated an efficiency increase of 23.2% in comparison with the base system. The findings of this research significantly contribute to a comprehensive understanding of the influence of water-spray operating conditions on IEC performance, and provide valuable insights for the design and operation of high-efficient IEC systems in practical applications. • The datasets were generated by a laboratory-scale prototype of the IEC system. • The ANN model for IEC considering spray operation was trained and validated. • Effects of nozzle and operation characteristics parameters were investigated. • The significance of the influential parameters was evaluated. • The optimal parameters for IEC were determined based on genetic algorithms. [ABSTRACT FROM AUTHOR]

The paper delves into the examination of energy transfer efficiency from a floating mass transducer, a crucial element of a middle ear implant, to the middle ear structure. The study compares two types of electromagnetic transducers: one employing cumulatively coupled coils and the other utilizing differentially coupled coils. Furthermore, it introduces a novel nonlinear model of electromechanical coupling, establishing a connection between a biomechanical representation of the middle ear and an electromechanical model of the transducer to elucidate the relative positioning of the coils to the magnet. Calculations are conducted using the Runge–Kutta method in Matlab to assess the induced vibrations of the stapes and the energetic efficiency of the implanted middle ear (middle ear with transducer). The simulation results highlight a significant dependence on the magnet and coils configuration, underscoring the necessity for optimization to ensure appropriate comfort for implant users. Lastly, the energetic efficiency of the transducer is compared across the frequency range of 0.2–8 kHz, leading to practical insights and conclusions. • A new nonlinear model of electromechanical coupling for floating mass transducer is developed. • Two coils coupled cumulatively and differentially are tested for the sake of energy efficiency. • The maximum value of energy efficiency occurs in the 8th octave. • A coil-to-magnet shift is required to increase the energy efficiency. [ABSTRACT FROM AUTHOR]

The development and utilization of solar energy, meteorological forecasting, and agricultural production all require accurate predictions of radiance. However, due to the influence of meteorological conditions and the failure of observation instruments and design defects, the data collection of all-sky radiance distribution is often missing or inaccurate. In this paper, a new modified method of all-sky radiance distribution (CASR) is proposed based on the Spatial distribution of daylight model recommended by Commission Internationale de l'Eclairage (CIE model). Firstly, a functional relationship between sky luminance and radiance was established based on measured data. Secondly, the abnormal values were divided into four categories according to the number of anomalous regions of radiance and the frequency of abnormal values in each sky region is determined, and the reasons were analyzed according to different altitude angles. Thirdly, the radiance and sky luminance anormal values were screened to determine their sky type by comparing them to a dataset of 15 standard sky types. The abnormal values were then corrected using the CIE luminance model with the relationship between radiance and sky luminance. Finally, the CASR model was validated against existing models. The results show that the CASR model accuracy was better than the existing model, which can accurately correct the sky luminance and radiance abnormal values and accurately characterize the distribution of radiance of the whole sky. It provides a theoretical basis for radiance prediction, natural lighting analysis and building energy consumption analysis. • Linear and polynomial functional relationships between radiance and sky luminance were established. • Classified and summarized the anomaly data according to their causes and the number of radiance anomaly regions. • A new modified method of all-sky radiance distribution based on the principle of photothermal integration was proposed. [ABSTRACT FROM AUTHOR]

Range-extended electric vehicles combine the benefits of electric propulsion with the convenience and range flexibility of conventional internal combustion engine vehicles. In the energy management system, an equivalent consumption minimization strategy (ECMS) ensures balanced utilization of various energy sources to meet driving demand in real time, thereby enhancing energy efficiency. This paper proposes a driving pattern personalized reconstruction (DPPR) method to maximizes the accuracy of velocity prediction and to serve a predictive ECMS (P-ECMS) with high adaptability to uncertain scenarios. In this context, open-source driving cycles are segmented, and features of each driving pattern are extracted for cluster analysis. Utilizing the results from clustering, new driving cycles are reconstructed for the purpose of training adaptive neuro-fuzzy inference system (ANFIS) models. Personalized velocity prediction is achieved through bias fusion in the multi-ANFIS model, adapting to various driving conditions. The performance of the proposed P-ECMS is validated across various driving conditions and compared with conventional ECMS (C-ECMS), adaptive ECMS (A-ECMS), dynamic programming (DP), and fuzzy logic (FL) strategy. The results indicate that using the proposed P-ECMS is strongly robust in terms of battery pack SoC stabilization under various driving conditions, whose SoC difference achieves 97.02% of using the DP strategy. Compared to using other strategies, using P-ECMS achieves better SoC's stability and lower fuel consumption than using the FL strategy (11.1%), using A-ECMS (1.7%), and using C-ECMS (26.6%). • A method of driving pattern personalized reconstruction is proposed. • Adaptability of the equivalent factor for uncertain scenarios is improved. • A multi-ANFIS model is designed to capture the diversity of driving conditions. • A co-simulation platform is established for algorithm validation. • Better charge-sustaining performance and fuel economy are achieved. [ABSTRACT FROM AUTHOR]

Air-cooled chillers are extensively employed to meet cooling demand in commercial and tertiary sectors. To enhance their performance during part-load operation, variable-speed drives have been integrated into compressors and condenser fans. In existing systems, condenser fans are either operated at a fixed speed or modulated to maintain a predetermined condensing pressure or temperature difference between the refrigerant and outdoor air. In the search for increased efficiency, it is worth investigating innovative control strategies aimed at minimizing energy consumption. A preliminary mapping of chiller performance at different fan speeds, loads, and operating conditions is required to achieve this goal. In this respect, this paper investigates the operation of air-cooled chillers equipped with variable-speed condenser fans, both in the case of constant- and variable-speed compressors. An ad hoc matrix test is adopted to cover appropriate ranges conditions, in terms of load and outdoor air temperatures. Performance maps are developed for a 50-kW c chiller using a 1-D simulator. As the main findings, it may be stated that (i) in the case of the variable-speed chiller, the energy efficiency ratio increases almost linearly with fan speed, resulting in an 8.8% increase when increasing the speed from the nominal to the maximum; (ii) in the case of constant-speed chillers, the system exhibits a different behavior with the cooling capacity and the energy efficiency ratio increasing with the fan speed between 380 and 980 rpm and then decreasing (slightly or sharply, at full and part load respectively) with fan speed between 980 and 1280 rpm, and a percentage increase of EER in the range 7.8–45% is observed. Also, the sensitivity of such results to the system design is investigated, analyzing a chiller equipped with a larger condenser that resulted in achieving minimum energy consumption at an optimal 980 rpm fan speed. Finally, for a constant-speed chiller serving an office building in the Mediterranean, the proposed fan control strategy could yield an electricity saving of up to 12.1% compared to the base case, confirming the potential for energy savings through optimized and system-tailored management of condenser fan speed. • The effect of variable-speed fans on the performance of air-cooled chillers is investigated. • Maps are developed for chillers with both variable-speed and constant-speed compressors. • Fan speed significantly influences the cooling capacity of constant-speed chillers. • In variable-speed chillers, it is advisable to always run the condenser fan at high speed. • The enhanced fan strategy enables 12.1% energy savings for a chiller in an office building. [ABSTRACT FROM AUTHOR]

There is growing interest in demand-side interventions aimed at reducing residential peak-hour electricity consumption in response to energy transition. However, limited knowledge exists regarding residents' willingness to accept compensation (WTC) for power rationing during peak hours. This study empirically evaluates the compensation standards based on residents' willingness to accept power rationing in peak hours based on the Choice Experiment (CE). The results indicate that residents are concerned most with the attributes of power rationing seasons and power rationing periods, requiring higher compensation for power rationing in summer and at night, whether on weekdays or non-weekdays. Further analysis reveals significant regional and group heterogeneity. Specifically, residents in northern regions are not significantly concerned about the power rationing durations compared to those in southern regions, while they are more on power rationing degrees. Analysis based on the Latent Class Analysis (LCA) model shows that two classes of residents are willing to participate in the power rationing agreement for free on both weekdays and non-weekdays, as well as two categories of residents unwilling to participate in the compensated power rationing on non-weekdays. Based on this, we estimate that the adjusted participation rate of residents in compensated power rationing is 96.59% on weekdays, with compensation ranges from 0.67 ￥/kWh to 13.38 ￥/kWh, and a participation rate of 69.69% on non-weekdays, with compensation levels ranging from 3.99 ￥/kWh to 15.34 ￥/kWh. This paper also assesses the costs of power rationing compensation to provide evidence for policymakers when determining the compensation level of the power rationing program. • Power rationing season and periods are the most concerned by residents compared with other attributes. • Heterogeneity in regional and group preferences for compensated power rationing is estimated. • Residents' participation rate in power rationing is 96.59% on weekdays and 69.69% on non-weekdays. • The compensation level is 0.67–13.38 ￥/kWh on weekdays and 3.99–15.34 ￥/kWh on non-weekdays. [ABSTRACT FROM AUTHOR]

In this paper, an equilibrium-heuristic online prediction optimization approach is proposed for multi-market peer-to-peer (P2P) electricity–hydrogen trading of integrated energy systems (IESs) with uncertainties. First, the IES, consisting of a hydrogen energy storage subsystem and a combined cooling, heating, and power subsystem, is constructed in the distribution network to improve energy utilization and market efficiency. Then, a bi-level optimization model for IESs, participating in the P2P electricity–hydrogen energy trading, the real-time electricity, and the ancillary service markets, is proposed, in which the top-level model can be formulated as a P2P electricity–hydrogen trading pricing model through the social welfare maximization problem, and the lower-level model is used to maximize the IES operating profit. To effectively solve the bi-level model, the game equilibrium-based ADMM distributed algorithm is used to obtain the P2P trading volume and prices of the top-level model, and a new hybrid heuristic algorithm, called hybrid sand cat swarm optimization and improved honey badger algorithm (SCIHB), is proposed to solve the lower level model. SCIHB utilizes a hybrid mechanism and an adaptive learning rate parameter to balance local exploitation and global exploration. Furthermore, a new online learning probabilistic prediction method based on the hidden Markov model and wavelet transform is introduced to describe the uncertainties of wind power, electricity prices, and frequency regulation prices. Finally, case studies are conducted on an IEEE 33-bus test system, and the numerical results verify the effectiveness of the proposed P2P trading model and solution approach. [Display omitted] • Designed a new cooling-heating-power-hydrogen integrated energy systems (IESs). • Developed a novel multi-market P2P trading model for IESs considering uncertainties. • Game equilibrium-based ADMM is employed to obtain the P2P trading volume and prices. • The operating profit of P2P trading is improved by the proposed heuristic method. • A new online learning model for efficient prediction of uncertainties in P2P trading. [ABSTRACT FROM AUTHOR]

Since a renewable energy is connected to a high-altitude integrated energy system (HAIES), challenges arise for system operation. Shared energy storage as a jointly operated energy hub for multi-integrated energy system (IES) can effectively improve the economy and flexibility of the system. This paper proposes a joint day-ahead and intra-day scheduling strategy for a HAIES considering a shared composite energy storage operator (SCESO) and profit clearing scheme. First, a HAIES structure suitable for residential, industrial, and commercial applications is built based on combined oxygen supply and integrated demand response (IDR). An SCESO is then proposed to provide multiple energy sharing services for HAIES cluster, including electricity–oxygen–hydrogen. Accordingly, HAIESs and SCESOs are aggregated to create a HAIES cluster energy sharing framework. Second, during the intra-day scheduling stage, which is based on real-time forecast data that considers multiple source–load–charge uncertainties, the flexible adjustment capabilities of each unit of the framework are used to achieve intra-day energy balance and ensure the safe operation of the framework. Furthermore, a profit clearing scheme is proposed, introducing different energy contribution quantification methods for different energy cooperation modes. Finally, day-ahead and intra-day simulation results under multiple scenarios are analyzed. The simulation results demonstrate that the framework is optimal in terms of economy, adaptability to different RE outputs and RE uncertainties, and energy storage utilization efficiency. • It proposes a new HAIES and SCESO energy cooperation framework. • An intra-day scheduling strategy for the framework is proposed. • A profit clearing scheme is constructed. [ABSTRACT FROM AUTHOR]

Renewable Energy Communities (RECs) are being deployed all around the World as a technically feasible solution to decreasing users' dependence on fossil fuels. Several demonstration facilities have shown their potential to provide final consumers with clean energy and all associated environmental benefits. However, the economic evaluation of these systems as a whole set is more complex than evaluating generation technologies individually, which can be considered a barrier, and it may be more complicated to calculate its uncertainty with precision. This paper deals with this challenge and adapts a model for the evaluation of the global Levelized Cost of Electricity (LCOE) of a polygeneration microgrid to the characteristics of a typical REC, allowing the assessment of the distribution of the LCOE depending on the uncertainty of the input parameters. Thanks to its simple analytical formulation, the proposed model, that can be used for any combination of technologies (both renewable and conventional), provides relevant information on uncertainty propagation in a symbolic way that avoids the need to run numerical simulations or make assumptions on the distribution of the random input parameters. A case study has been presented, considering a typical small electrical REC with photovoltaic plants and micro wind turbines. Although the model can be defined to any market, as a representative example, it has been evaluated according to the current Spanish and Italian regulations, which are analyzed in depth with reference to the scientific literature. Results show that uncertainties in parameter estimates give rise to a very large scatter in the LCOE, pointing out a set of quantities whose role is crucial for a reliable estimate, among which electricity purchase and selling prices, yearly power load, and self-consumption / virtually-shared energy rates stand out. [Display omitted] • The global LCOE for a typical REC has been defined. • The uncertainty propagation in the LCOE formulation has been studied. • The proposed model has been applied to an electrical polygeneration REC. • As an example, the Spanish and Italian regulatory frameworks have been considered. • The LCOE of RECs is mainly sensitive to the electricity price and the power load. [ABSTRACT FROM AUTHOR]

Currently, building energy consumption prediction models are usually based on a large amount of historical operational data in high demands of building operating hours and monitoring systems. However, many buildings may lack operational data due to relatively limited monitoring systems, causing the failure to use data-driven methods to characterize the energy profile. In this context, transfer learning is a promising method to establish the knowledge transfer between many high-quality building operation datasets and a small amount of target building data, and to help predict energy consumption in the target building. This paper studies the possibility of employing transfer learning to achieve both short and long-term building energy consumption prediction. Firstly, a similarity analysis method, based on variable modal decomposition and dynamic time warping, is proposed for identifying the source buildings with the most similar energy features to the target building. Then, transfer learning for long-term prediction air-conditioning energy consumption is developed with weather parameters generated by the Morphing method as inputs. For the short-term single-step prediction, the proposed model CV-RMSE improves 81.3% (AEC) and 77.4% (EEC), respectively, compared to the prediction model that does not implement the transfer learning strategy and directly uses the target BEC data. As for the short-term multi-step prediction, the proposed model CV-RMSE improves 62.0% (AEC) and 65.5% (EEC), respectively. For the long-term prediction, the average CV-RMSE for the whole year is 6.62% and 11.15% for the proposed and directly target domain-based model, respectively. The proposed method explores the practicality of transfer learning in building energy forecasting, contributing to the use of existing building operation data for energy management at different timespan. • A similarity analysis method for building energy consumption data based on VMD-DTW is proposed. • The Seq2Seq-Transformer model is applied to short-term multi-step prediction of building energy consumption. • Transfer learning idea is first introduced to the long-term building energy consumption prediction. [ABSTRACT FROM AUTHOR]

The integration of distributed energy resources (DERs) such as wind, solar, batteries, etc. into the grid presents opportunities as well as challenges with regard to efficient coordination and trading. Virtual power plants (VPPs) have emerged as an important paradigm for aggregating and managing numerous DERs. This paper proposes a decentralized blockchain-based peer-to-peer (P2P) multilayer energy trading framework to facilitate optimized coordination of DERs within a VPP context. A control center, prosumers, and service operators constitute the model's multi-layered architecture. Profits from feed-in tariffs, ancillary services, and P2P sales are optimized for revenue while expenses are minimized using a mixed-integer linear programming formulation. Smart contracts enable prosumers to trade energy units in the Ethereum blockchain with ease via a participatory web platform. The effectiveness of the framework in synchronizing power supply and demand within the VPP by coordinating the charging and discharging of storage systems in accordance with consumption patterns is demonstrated through performance evaluation. In contrast to conventional centralized architectures, the proposed framework utilized decentralized architecture efficiently consolidates and optimizes distributed energy resources (DERs) to improve grid stability and renewable energy utilization. [Display omitted] • A novel multi-layer framework for peer-to-peer (P2P) energy trading, within VPP. • An interactive web-based trading platform using the Ethereum blockchain to facilitate exchange of energy units. • Implementation of MILP-based DER management model for optimal trading. [ABSTRACT FROM AUTHOR]