Search

In this short communication the solution of a steady state model of a sextuple evaporator system used in a paper industry has been presented. With the help of the residual values of model equations (a set of 12 nonlinear algebraic equations) it has been shown that the presently obtained results are superior to the previously published results. The importance of the number of significant digits in calculation are also briefly discussed. [ABSTRACT FROM AUTHOR]

• This research proposes a new formulation for the integrated lot-sizing and cutting-stock problem. • It is also presented analytical and numerical comparisons of the proposed model against the model from the literature. • A column generation approach and a relax-and-fix heuristic were applied to solve the proposed model. The integrated lot-sizing and cutting-stock problem has become a trend in the last decades for its applicability and advantage. Consequently, different approaches and formulations have been developed. One of them, which is widespread and related to the production and cutting process of paper, is the research subject of this paper. Fundamental considerations about the literature model are discussed and an alternative formulation is proposed, which consists of a simplified version that can provide better solutions. The upgrade modifications are proved analytically and an instance is analyzed to exemplify the discussed improvement. Moreover, computational tests are performed to compare both formulations. The novelty of the proposed formulation is the possibility of finding better solutions through the reduction of a constraint set, which guarantees the flexibility given by item and object inventories in meeting demand and it also enables a reduction in the total amount of produced paper. The proposed formulation has a significant impact on future research since the addressed model is the target of many scientific researches and practical applications. [ABSTRACT FROM AUTHOR]

Abstract: Availability analysis has been an important issue in the design field of any Industrial system as the system structure has become more complicated. Also, the system availability is affected by many factors such as design, manufacturing, installation, etc., and so it may be extremely difficult to model, analyze and predict the failure behavior of the system. The purpose of this paper is to develop a new approach for computing various performance measures, namely reliability, availability, MTBF (mean time between failures), ENOF (expected number of failures), failure rate and repair time, for any industrial system. In the proposed approach, the failure rates and repair times of all constituent components are obtained using genetic algorithms and then various performance measures are computed using fuzzy lambda–tau methodology. Washing system, the major part of paper industry is the subject of study. The interactions among the working components are modeled using Petri nets. Failure and repair rates are represented using triangular fuzzy numbers as they allow expert opinion, linguistic variables, operating conditions, uncertainty and imprecision in reliability information to be incorporated into system model. Based on calculated reliability parameters, a structured framework has been developed that may help the maintenance engineers to analyze and predict the system behavior. [Copyright &y& Elsevier]

A multivariable, time invariant model for a Fourdrinier machine headbox is considered. Analysis procedures enabling safe, economical closed loop response regulation are outlined. An optimum, minimum control effort strategy is proposed. Simulated open and closed loop response records are computed. The effectiveness of the design procedure, which minimises the power consumption for regulation purposes improving reliability and reducing refit and maintenance costs thereby, is commented upon. [Copyright &y& Elsevier]

Abstract: This paper is concerned with the temperature field produced by a thermal printer head. Such heads are used to provide high quality prints of electronically stored images. In this system, a thin dye-layer, sandwiched between two copolymer sheets, is heated by a thermal head and dye diffuses into the receiver sheet producing a small dye-dot. The picture is made up of a large number of such dots. The basic aim is to determine the amount of dye which is eventually diffused into the receiver sheet when the heating is turned off and the system has cooled down. However, the amount of dye which diffuses into the receiver sheet depends on the temperature field because the diffusion coefficient is a sensitive function of temperature. In the thermal printer system, each head is heated by an electric current which is carried by gold leads. In this paper, we show that the heat loss through these leads has an important effect on the temperature field produced by the head and therefore, strongly influences the amount of dye transferred. [Copyright &y& Elsevier]

Abstract: In this note, we point out an error in the recently published article [R.K. Mohanty, M.K. Jain, D. Dhall, A cubic spline approximation and application of TAGE iterative method for the solution of two-point boundary value problems with forcing function in integral form, Appl. Math. Model. 35 (2011) 3036–3047] and then correct it. [Copyright &y& Elsevier]

This paper introduces link information value obtained by the traffic sensors and presents a traffic sensor location and flow estimation joint optimization model in an urban road network. In contrast to most previous studies, this paper adds new traffic sensors into the existing sensor network and proposes a data-driven path flow measurement method based on Wasserstein metric, which is utilized to measure the distance between the estimated traffic flow distribution and the actual distribution. Furthermore, this paper develops a customized greedy algorithm by combining a search strategy for the link information value to obtain the optimal sensor location scheme and perform traffic flow estimation under different budget conditions. Numerical experiments are conducted on Sioux-Falls test network and Eastern Massachusetts interstate highway subnetwork to verify the accuracy and effectiveness of the proposed model based on Wasserstein metric and the developed solution method. Computational results show that the sensor location scheme generated by the model based on Wasserstein metric can reduce the estimation error of the traffic flow compared with KL divergence model under the same deployment cost. Additionally, the customized greedy algorithm can achieve the better performance than the Brute force algorithm in terms of computing time and solution quality. • A traffic sensor location and path flow estimation joint optimization model is formulated. • A data-driven path flow measurement method based on Wasserstein metric is proposed. • A customized greedy algorithm by combining a search strategy is developed. • Numerical experiments are conducted based on the real-word transportation network. [ABSTRACT FROM AUTHOR]

This paper takes a reaction-diffusion predator-prey system with ratio-dependent Holling III functional response function and Leslie-Gower term into consideration. First of all, the system model is proposed on the basis of basic biological assumptions and previous work, and the existence conditions of the equilibrium point of the system are discussed. Secondly, under the assumption of the existence of equilibrium point, the Turing instability necessary conditions induced by diffusion are investigated. Thirdly, optimal control theory is derived, and the adjoint system and the first-order optimization condition are established. Fourthly, parameter identification based on optimal control is studied, and the technique is extended to network structure. Finally, extensive numerical simulations, including Turing pattern, Normalized Population High Distribution Area (NPHDA) diagram and parameter identification, are carried out to illustrate and validate the analytical results. For the system dynamics phenomena, the results from different perspectives effectively demonstrate that the theoretical findings, numerical simulations and natural reality are identical. In terms of the parameter identification of continuous model and network model, the efficiency and accuracy of various algorithms are fully tested. • This paper proposes and investigates index normalized population height distribution area. • The optimal control problem of reaction-diffusion predator-prey system is formally derived. • The parameter identification research is extended to population network structure space. [ABSTRACT FROM AUTHOR]

• Nonlinear model for a bended piezoelectric semiconductor beam is established. • Differential quadrature method based iteration procedure is developed. • Nonlinearity of constitutive relation and non-uniformity of structure are focused. • Potential barriers and wells are realized through designing structures. In this paper, the effects of nonlinear constitutive relation on the electro-elastic coupling behaviors in non-uniform piezoelectric semiconductor beams are investigated. On the basis of three-dimensional theory for piezoelectric semiconductor and double power series, one-dimensional bending model is developed. In order to deal with the nonlinear problem, a differential quadrature method based iteration procedure is proposed. Comparing with the results from finite element method, the proposed method has good convergence and high accuracy. In numerical analysis, the effects of nonlinearity and non-uniformity in piezoelectric semiconductor are discussed thoroughly. It is found the introduction of nonlinearity induces the loss of symmetric for all electrical field quantities but little changes the mechanical quantities. While the reduction of width along the length direction produces larger mechanical and electrical responses. Importantly, the effects of nonlinearity on the electrical field quantities are more evident in a piezoelectric semiconductor beam with rapidly varied cross section. Besides, we designed the piezoelectric semiconductor beams subject to double shear forces and a beam with locally varied cross section. In the designed structures, the potential barriers and wells are realized, which provide new approaches adjusting the electro-elastic behaviors in piezoelectric semiconductors. The study in this paper could be the guidance designing high performance electronic devices. [ABSTRACT FROM AUTHOR]

• Derivatives of Dirac delta function were introduced to describe the action of joint parts in dynamic analysis. • Analytical solutions were provided to study dynamic responses of joints in infinite beams under time-lag loads. • Connection between joints and standard beams induces great differences in dynamic responses. This paper investigates the analytical method for the infinite beam with joint parts resting on a foundation under time-lag loads. The ground is simulated as a viscoelastic foundation. The existence of joint parts in beams is explained by introducing virtual forces expressed through the Dirac delta function. Integral transformation simplifies the dynamic governing equations for standard beam sections and joint parts into an algebraic equation. The convolution theorem converts the solutions into the time domain. The analytical solutions for dynamic analysis of standard beam sections and joint parts are obtained conveniently in the frequency domain. The proposed analytical method is verified by comparing it with the traditional methods and also validated by numerical examples with time-lag loads. Parametric discussions study the effects on the dynamic response of joint parts and standard beam sections, such as the amplitude and frequency of time-lag loads and coefficient of bending stiffness reduction of joint parts. The parametric analyses emphasize the dramatic effect of critical parameters on the discontinuous deformation of beams. The damage caused by critical values of some factors is emphasized. The severe effects of discontinuous deformation induced by dynamic loads in the safety of beam structures are revealed in this paper. The differences in dynamic responses between the beam and joint part must be monitored to ensure the safety of whole beam structures. [ABSTRACT FROM AUTHOR]

This paper presents an approach for analytically solving gradient-enhanced damage (GED) models. The proposed approach provides rigorous proofs for essential phenomena observed in the traditional GED model, including damage widening, characteristic length sensitivity, and stress-locking. The derived cohesive law is a useful technique for accurately determining the material parameters of the GED model, significantly reducing the sensitivity to characteristic length. Furthermore, this study presents an isotropic damage model that considers both tensile and shear failures and can capture complex crack paths. Finally, a series of numerical examples is shown to demonstrate the efficacy of the suggested method. • This paper introduces a mathematical approach for the analytical solution of gradient-enhanced damage (GED) models. • The analytic solution alleviates the characteristic length sensitivity in the GED model. • The proposed damage evolution method can effectively capture complex crack paths. [ABSTRACT FROM AUTHOR]

Snake robots have redundant kinematic structure which predetermines them for motion in rough and unstructured terrain with obstacles, narrow spaces or environments with different ground levels. Dynamic modeling of snake robots is an important element in the development of control strategies for them. This paper, deals with the dynamic model of a snake robot moving in a pipeline. The model is based on Newton's mechanics with consideration of the viscous as well as Coulomb friction model. The paper uses Hertz theory for modeling of contact between a snake robot and side walls of a pipeline. Based on optimization process results, the friction effects as well as analyses of snake robot propulsive force are investigated. The main contributions of the paper are the developed dynamic model for snake robot motion in a pipeline, open source code of the developed model in MATLAB, and analyses of individual parameters of snake robot motion. • Propulsive force of snake robot moving in a pipeline is significantly affected by friction of the side walls. • One full sine wave formed by snake robot links ensures maximum average velocity. • Considering Coulomb friction the snake robot performs more jerked motion in comparison with viscous friction. [ABSTRACT FROM AUTHOR]

• Semi-analytical solution of damping fluid-conveying pipe systems are obtained. • The concepts of the original system and the adjoint system are introduced for research. • The eigenvalues and eigenfunctions of the original system and the adjoint system are obtained. • The orthogonality condition of damped gyroscopic system is obtained in state space. • It is proved that the original system and the adjoint system of the system with free boundary are not orthogonal. In this paper, the response solutions of the damped fluid-conveying pipe system with elastic torsion constraints at both ends are analyzed. The pipe system considering gyroscopic effect induced by internal flow and damping effect is a typical damped gyroscopic system. This system cannot be decoupled in the modal space by the traditional modal analysis, and then the semi-analytical response solutions cannot be obtained by the classical modal superposition method. In order to remedy this problem, this paper proposes a new method based on complex modal superposition method and state-space method to give the semi-analytical response solutions of the damped fluid-conveying pipe system. The adjoint system is introduced through the concept of adjoint operator, and the orthogonality conditions of the damped fluid-conveying pipe system are derived in the state-space by using the eigenvalue relationship between the original system and the adjoint system. The Laplace transformation method is used to solve the eigenvalue problems of the original system and the adjoint system, and the implicit function equations about the eigenvalues and analytical eigenfunctions are obtained. According to the obtained orthogonality conditions, the semi-analytical response solutions of the system under arbitrary initial conditions and excitations are given, and the obtained solutions include transient and steady-state response solutions. In the numerical discussion part, the reliability and accuracy of the present method are verified. This research has positive significance for the dynamic analysis of fluid-conveying pipe systems, and the obtained orthogonality conditions have potential value for the nonlinear dynamics research. [ABSTRACT FROM AUTHOR]

• Improved lorenz chaotic systems with higher complexity. • Pixel permutation method based on the image pyramid structure. • Secure and efficient image encryption method. • Galois field multiplication for efficient diffusion of pixels. This paper proposes an improved Lorenz chaotic system and a secure and efficient image encryption method to enhance encryption effectiveness in encrypted images. The proposed improved Lorenz chaotic system addresses the problem of applying the Lorenz chaotic system to image encryption, resulting in weak chaotic characteristics and susceptibility to reconstruction. Dynamic analysis, sensitivity analysis, and randomness testing demonstrate that the improved Lorenz chaotic system exhibits hyperchaotic characteristics, with a maximum Lyapunov exponent of 2.9897. Based on the improved Lorenz chaotic system, this paper proposes an image encryption method that combines image pyramid structure permutation and Galois field diffusion. Unlike most of the current permutation methods limited to a single image layer, this paper proposes a multilayer permutation method based on the image pyramid structure to enhance the permutation effect of image encryption. Although diffusion based on Galois field multiplication operation is efficient and secure, it is less effective in encrypting pixel points with a pixel value of '0′. To address this issue, this paper incorporates DNA computing into diffusion based on Galois field operations, enabling even pure black images to achieve better encryption effectiveness. Experimental results demonstrate that the encryption method proposed in this paper effectively conceals information contained in the plain image. The global Shannon entropy of the encrypted Lena image can reach 7.9975, indicating a high level of randomness and complexity. Notably, even a slight alteration, such as changing a single pixel, results in a significant divergence, with 99.6307 % of the cipher image's pixels being distinct. Moreover, it effectively withstands analysis from various attacks. Therefore, the encryption method proposed in this paper can be effectively applied to grayscale image encryption scenarios requiring relatively high security and encryption efficiency, such as remote sensing image encryption and personal privacy image encryption. [ABSTRACT FROM AUTHOR]

• Exact geometrical shape of tool is involved in the mathematical model. • Friction force comprises the sliding friction force and the rolling friction force. • Plough force is involved in the cutting force model due to the cutting edge radius. Variations in cutting forces significantly influence the tool wear and part quality in machining high-volume SiC-particle-reinforced aluminum matrix (SiCp/Al) composites. Properties of the reinforcement SiC particles, such as size and volume fraction, contribute to the change in the cutting forces. This paper presents a cutting force model based on the geometrical and mechanical nature of the tool and workpiece, considering the effect of the SiC reinforcement particles. The cutting force is predicted as three components (F z , F x , and F y) and the resultant cutting force F τ s. The cutting force was considered to generate three deformed zones: (a) shear deformed zone, (b) friction deformed zone on the chip–tool interface, (c) plow deformed zone. The effect of SiC reinforcement particles on friction deformed zone is analyzed emphatically. The friction force from friction deformed zone was obtained by calculating the sliding friction force and rolling friction force. To verify the feasibility and validity of the predicted model of cutting force, cutting experiments were performed with different combinations of cutting speed, feed rate, depth of cut, and tool nose radius. The predicted cutting force values demonstrate good agreement with the measured experimental cutting force values in most cutting conditions. The average percentages of the prediction error were 1.93%, 6.20%, and 10.48% for the F z , F x , and F y components, respectively, thus proving the validity and accuracy of the predicted model of cutting forces. [ABSTRACT FROM AUTHOR]

• The elastic instability phenomenon in hyperelastic layered materials with the phases exhibiting stiffening behavior is studied • A closed-form expression for the critical stretch of macroscopic instability is derived • An analytical prediction based on Bloch-Floquet analysis for the microscopic instability is exhibited • The critical parameters and transition of instability modes are found to be highly tunable with phase stiffening This paper investigates the elastic instability behavior in soft periodic laminates subjected to finite strains, with a focus on both macroscopic and microscopic instabilities. Considering the deformation-induced phase stiffening, the Gent model with a high bulk-to-shear modulus ratio describes the behavior of incompressible phases. This non-Gaussian statistics-based model captures the non-linear constitutive results from the limited extensibility of polymeric molecular chains. This paper derives an analytical prediction for the onset of macroscopic (or longwave) instability and microscopic instability as functions of material parameters. Moreover, a numerical Bloch-Floquet analysis is imposed on identifying the instability behavior under compression. We consider a wide range of phase combinations and find that the relatively rapid stiffening of the matrix compared to the stiff layer increases the stability of laminates by decreasing the critical stretch ratio. Essentially, properly manipulating the stiffening parameters can produce an absolutely stable region without observed instability. This paper also systematically illustrates the changes in instability and the transition between macro and micro instability in fully Gent laminates, which show higher stability than fully neo-Hookean laminates with larger critical stretch ratios. The critical characteristics of instabilities, such as critical stretch ratios and critical wavenumbers, can be controlled by the choice of stiffening parameters and other material properties, enlarging the tuning of soft laminates for desired buckling patterns in practical applications. [ABSTRACT FROM AUTHOR]