Search

In this short communication the solution of a steady state model of a sextuple evaporator system used in a paper industry has been presented. With the help of the residual values of model equations (a set of 12 nonlinear algebraic equations) it has been shown that the presently obtained results are superior to the previously published results. The importance of the number of significant digits in calculation are also briefly discussed. [ABSTRACT FROM AUTHOR]

• This research proposes a new formulation for the integrated lot-sizing and cutting-stock problem. • It is also presented analytical and numerical comparisons of the proposed model against the model from the literature. • A column generation approach and a relax-and-fix heuristic were applied to solve the proposed model. The integrated lot-sizing and cutting-stock problem has become a trend in the last decades for its applicability and advantage. Consequently, different approaches and formulations have been developed. One of them, which is widespread and related to the production and cutting process of paper, is the research subject of this paper. Fundamental considerations about the literature model are discussed and an alternative formulation is proposed, which consists of a simplified version that can provide better solutions. The upgrade modifications are proved analytically and an instance is analyzed to exemplify the discussed improvement. Moreover, computational tests are performed to compare both formulations. The novelty of the proposed formulation is the possibility of finding better solutions through the reduction of a constraint set, which guarantees the flexibility given by item and object inventories in meeting demand and it also enables a reduction in the total amount of produced paper. The proposed formulation has a significant impact on future research since the addressed model is the target of many scientific researches and practical applications. [ABSTRACT FROM AUTHOR]

Abstract: Availability analysis has been an important issue in the design field of any Industrial system as the system structure has become more complicated. Also, the system availability is affected by many factors such as design, manufacturing, installation, etc., and so it may be extremely difficult to model, analyze and predict the failure behavior of the system. The purpose of this paper is to develop a new approach for computing various performance measures, namely reliability, availability, MTBF (mean time between failures), ENOF (expected number of failures), failure rate and repair time, for any industrial system. In the proposed approach, the failure rates and repair times of all constituent components are obtained using genetic algorithms and then various performance measures are computed using fuzzy lambda–tau methodology. Washing system, the major part of paper industry is the subject of study. The interactions among the working components are modeled using Petri nets. Failure and repair rates are represented using triangular fuzzy numbers as they allow expert opinion, linguistic variables, operating conditions, uncertainty and imprecision in reliability information to be incorporated into system model. Based on calculated reliability parameters, a structured framework has been developed that may help the maintenance engineers to analyze and predict the system behavior. [Copyright &y& Elsevier]

A multivariable, time invariant model for a Fourdrinier machine headbox is considered. Analysis procedures enabling safe, economical closed loop response regulation are outlined. An optimum, minimum control effort strategy is proposed. Simulated open and closed loop response records are computed. The effectiveness of the design procedure, which minimises the power consumption for regulation purposes improving reliability and reducing refit and maintenance costs thereby, is commented upon. [Copyright &y& Elsevier]

Abstract: This paper is concerned with the temperature field produced by a thermal printer head. Such heads are used to provide high quality prints of electronically stored images. In this system, a thin dye-layer, sandwiched between two copolymer sheets, is heated by a thermal head and dye diffuses into the receiver sheet producing a small dye-dot. The picture is made up of a large number of such dots. The basic aim is to determine the amount of dye which is eventually diffused into the receiver sheet when the heating is turned off and the system has cooled down. However, the amount of dye which diffuses into the receiver sheet depends on the temperature field because the diffusion coefficient is a sensitive function of temperature. In the thermal printer system, each head is heated by an electric current which is carried by gold leads. In this paper, we show that the heat loss through these leads has an important effect on the temperature field produced by the head and therefore, strongly influences the amount of dye transferred. [Copyright &y& Elsevier]

Abstract: In this note, we point out an error in the recently published article [R.K. Mohanty, M.K. Jain, D. Dhall, A cubic spline approximation and application of TAGE iterative method for the solution of two-point boundary value problems with forcing function in integral form, Appl. Math. Model. 35 (2011) 3036–3047] and then correct it. [Copyright &y& Elsevier]

• Semi-analytical solution of damping fluid-conveying pipe systems are obtained. • The concepts of the original system and the adjoint system are introduced for research. • The eigenvalues and eigenfunctions of the original system and the adjoint system are obtained. • The orthogonality condition of damped gyroscopic system is obtained in state space. • It is proved that the original system and the adjoint system of the system with free boundary are not orthogonal. In this paper, the response solutions of the damped fluid-conveying pipe system with elastic torsion constraints at both ends are analyzed. The pipe system considering gyroscopic effect induced by internal flow and damping effect is a typical damped gyroscopic system. This system cannot be decoupled in the modal space by the traditional modal analysis, and then the semi-analytical response solutions cannot be obtained by the classical modal superposition method. In order to remedy this problem, this paper proposes a new method based on complex modal superposition method and state-space method to give the semi-analytical response solutions of the damped fluid-conveying pipe system. The adjoint system is introduced through the concept of adjoint operator, and the orthogonality conditions of the damped fluid-conveying pipe system are derived in the state-space by using the eigenvalue relationship between the original system and the adjoint system. The Laplace transformation method is used to solve the eigenvalue problems of the original system and the adjoint system, and the implicit function equations about the eigenvalues and analytical eigenfunctions are obtained. According to the obtained orthogonality conditions, the semi-analytical response solutions of the system under arbitrary initial conditions and excitations are given, and the obtained solutions include transient and steady-state response solutions. In the numerical discussion part, the reliability and accuracy of the present method are verified. This research has positive significance for the dynamic analysis of fluid-conveying pipe systems, and the obtained orthogonality conditions have potential value for the nonlinear dynamics research. [ABSTRACT FROM AUTHOR]

• Improved lorenz chaotic systems with higher complexity. • Pixel permutation method based on the image pyramid structure. • Secure and efficient image encryption method. • Galois field multiplication for efficient diffusion of pixels. This paper proposes an improved Lorenz chaotic system and a secure and efficient image encryption method to enhance encryption effectiveness in encrypted images. The proposed improved Lorenz chaotic system addresses the problem of applying the Lorenz chaotic system to image encryption, resulting in weak chaotic characteristics and susceptibility to reconstruction. Dynamic analysis, sensitivity analysis, and randomness testing demonstrate that the improved Lorenz chaotic system exhibits hyperchaotic characteristics, with a maximum Lyapunov exponent of 2.9897. Based on the improved Lorenz chaotic system, this paper proposes an image encryption method that combines image pyramid structure permutation and Galois field diffusion. Unlike most of the current permutation methods limited to a single image layer, this paper proposes a multilayer permutation method based on the image pyramid structure to enhance the permutation effect of image encryption. Although diffusion based on Galois field multiplication operation is efficient and secure, it is less effective in encrypting pixel points with a pixel value of '0′. To address this issue, this paper incorporates DNA computing into diffusion based on Galois field operations, enabling even pure black images to achieve better encryption effectiveness. Experimental results demonstrate that the encryption method proposed in this paper effectively conceals information contained in the plain image. The global Shannon entropy of the encrypted Lena image can reach 7.9975, indicating a high level of randomness and complexity. Notably, even a slight alteration, such as changing a single pixel, results in a significant divergence, with 99.6307 % of the cipher image's pixels being distinct. Moreover, it effectively withstands analysis from various attacks. Therefore, the encryption method proposed in this paper can be effectively applied to grayscale image encryption scenarios requiring relatively high security and encryption efficiency, such as remote sensing image encryption and personal privacy image encryption. [ABSTRACT FROM AUTHOR]

• The elastic instability phenomenon in hyperelastic layered materials with the phases exhibiting stiffening behavior is studied • A closed-form expression for the critical stretch of macroscopic instability is derived • An analytical prediction based on Bloch-Floquet analysis for the microscopic instability is exhibited • The critical parameters and transition of instability modes are found to be highly tunable with phase stiffening This paper investigates the elastic instability behavior in soft periodic laminates subjected to finite strains, with a focus on both macroscopic and microscopic instabilities. Considering the deformation-induced phase stiffening, the Gent model with a high bulk-to-shear modulus ratio describes the behavior of incompressible phases. This non-Gaussian statistics-based model captures the non-linear constitutive results from the limited extensibility of polymeric molecular chains. This paper derives an analytical prediction for the onset of macroscopic (or longwave) instability and microscopic instability as functions of material parameters. Moreover, a numerical Bloch-Floquet analysis is imposed on identifying the instability behavior under compression. We consider a wide range of phase combinations and find that the relatively rapid stiffening of the matrix compared to the stiff layer increases the stability of laminates by decreasing the critical stretch ratio. Essentially, properly manipulating the stiffening parameters can produce an absolutely stable region without observed instability. This paper also systematically illustrates the changes in instability and the transition between macro and micro instability in fully Gent laminates, which show higher stability than fully neo-Hookean laminates with larger critical stretch ratios. The critical characteristics of instabilities, such as critical stretch ratios and critical wavenumbers, can be controlled by the choice of stiffening parameters and other material properties, enlarging the tuning of soft laminates for desired buckling patterns in practical applications. [ABSTRACT FROM AUTHOR]

The dynamic behaviour of wildfires is mainly influenced by weather, fuel, and topography. Based on fundamental conservation laws involving numerous physical processes and large scales, atmospheric models require substantial computational resources. Therefore, coupling wildfire and atmospheric models is impractical for high resolutions. Instead, a static atmospheric wind field is typically input into the wildfire model, either as boundary conditions on the control surface or distributed over the control volume. Wildfire propagation models may be (i) data-driven ; (i i) theoretical ; or (i i i) mechanistic surrogates. Data-driven models are beyond the scope of this paper. Theoretical models are based on conservation laws (species, energy, mass, momentum) and are, therefore, computationally intensive; e.g. the Fire Dynamics Simulator (FDS). Mechanistic surrogate models do not closely follow fire dynamics laws, but related laws observed to make predictions more efficiently with sufficient accuracy; e.g. FARSITE, and FDS with the Level Set model (FDS-LS). Whether theoretical or mechanistic surrogate, these wildfire models may be coupled with or decoupled from wind models (e.g. Navier-Stokes equations). Only coupled models account for the effect of the fire on the wind field. In this paper, a series of simulations of wildfire propagation on grassland are performed using FDS-LS to study the impact of the fire-induced wind on the fire propagation dynamics. Results show that coupling leads to higher Rates of Spread (RoS), closer to those reported from field experiments, with increasing wind speeds and higher terrain slopes strengthening this trend. Aiming to capture the fire–wind interaction without the hefty cost of solving Navier-Stokes equations, a conceptual framework is proposed: 1) a swarm of unmanned aerial vehicles measure wind velocities at flight height; 2) the wind field is constructed with the acquired data; 3) the high-altitude wind field is mapped to near-surface, and 4) the near-surface wind field is fed into the wildfire model periodically. A series of simulations are performed using an in-house decoupled physics-based reduced-order fire propagation model (FireProM-F) enhanced by wind field "measurements". In this proof of concept, wind velocities are not measured but extracted from physics-based Large Eddy Simulations taken as ground truth. Unsurprisingly, higher measurement frequencies lead to more accurate and realistic predictions of the propagating fire front. An initial attempt is made to study the effect of wind measurement uncertainty on the model predictions by adding Gaussian noise. Preliminary results show that higher noise leads to the fire front displaying more irregular shapes and slower propagation. • Higher wildfire model prediction accuracy normally achieved by coupling it with wind model such as Navier-Stokes equations. • Coupled fire-wind models often too computationally expensive for real-time use in operational contexts. • Prediction accuracy of wildfire model uncoupled from wind model enhanced by periodic inputs of updated wind field. • Wind field to be constructed from UAV swarm measurements, surrogated here to velocities obtained from full CFD simulations. • Proposed method to enhance wildfire model predictions robust to Gaussian noise added to represent measurement uncertainty. [ABSTRACT FROM AUTHOR]

A new enhanced multi-strategy bottlenose dolphin optimizer is proposed. • The superiority of the proposed algorithm is verified by comparing with efficient intelligent algorithms. • A three-dimensional path planning model for unmanned aerial vehicles with time, threat, height and smooth cost is studied. • The proposed algorithm is applied to solve the three-dimensional path planning problem for unmanned aerial vehicles. • The quality of the proposed algorithm based path planning results is better than other approaches. The path planning of unmanned aerial vehicle is a complex practical optimization problem, which is an important part of unmanned aerial vehicle technology. For constrained path planning problem, the traditional path planning methods can not deal with the complex constraint conditions well, and the classical nature-inspired algorithms will find the local optimal solution due to the lack of optimization ability. In this paper, an enhanced multi-strategy bottlenose dolphin optimizer is proposed to solve the unmanned aerial vehicle path planning problem under threat environments. Firstly, the introduction of fish aggregating device strategy that simulates the living habits of sharks enriches the behavioral diversity of the population. Secondly, random mixed mutation strategy and chaotic opposition-based learning strategy expand the exploration range of the algorithm in the solution space by disturbing the positions of some individuals and generating the opposite population respectively. Finally, after balancing the exploration and exploitation ability of the algorithm more reasonably through the mutation factor and energy factor, this paper proposes a new swarm intelligence algorithm. After verifying the adaptability and efficiency of the proposed algorithm through different types of test functions, this paper further highlights the advantages of the proposed algorithm in finding the optimal feasible path in the unmanned aerial vehicle path planning model based on four constraints. [ABSTRACT FROM AUTHOR]

This paper presents a case study on condition monitoring of power generators at offshore wind turbines. Two fault detection models are proposed for detecting sudden changes in the sensed value of metallic debris at the generator. The first model uses an exponentially weighted moving average, while the second monitors first-order derivatives using a fixed threshold. This is expected to improve the maintenance activities by avoiding late or early part replacement. The economic impact of the proposed approach is also provided with a realistic depiction of the cost structure associated with the corresponding maintenance plan. While the specifics of the case study are supported by real-life data, considering the prevalence of the use of generators not only in offshore wind turbines but also in other production environments, we believe the case study covered in this paper can be used as a blueprint for similar studies in other applications. • Large scale condition monitoring demonstrates economic benefits. • Case study from real wind turbine population with economic impact assessment. • Sensor for monitoring fault mode results in lead time for maintenance planning. • Sensitivity analysis assesses results despite downtime and power price uncertainty. [ABSTRACT FROM AUTHOR]

• A model to explore the multiphysics characteristic of semiconductors is presented. • The model determines the thermal and mechanical properties of complex patterns. • Results show a strong correlation between thermal and mechanical properties. • Dielectric bands asymmetrically affect thermal and mechanical behavior. • Machine learning can predict one property from another. As semiconductor performance improves through advanced package designs, it becomes important to consider both thermal and mechanical properties. Better understanding their relationship enhances system design and optimization. This study has introduced a numerical method that takes into account both thermal and mechanical fluxes to construct thermal and mechanical property maps for practical application in semiconductor engineering. Furthermore, this paper investigated the relationship between the two properties using the constructed property maps in commercially available semiconductor packages. Owing to the complexity of packaging design patterns, a coupled isoparametric mapping and machine learning (ML) method was introduced to investigate their effects. The model then determines and investigates the anisotropic equivalent thermal and mechanical properties of the commercialized semiconductor packages with complex pattern designs, according to the package materials, volume fractions of each material, and design patterns. This approach pursues more sophistication and practicality compared to simplified composite structure property evaluation models. Additionally, all processes in the algorithm are automated based on ML methods, making them practically applicable in the semiconductor industry. The study shows that there is a strong correlation between the thermal and mechanical characteristics in the complex package patterns. This relationship was able to form a fairly clear category based on the shape of the dielectric band because the dielectric band had significantly different effects on the thermal and mechanical fluxes. The study discussed the physical implications of the similarities and differences between the two behaviors and validated the results of the equivalent properties through finite element (FE) analysis. Finally, the study cross-validates the relationship by showing that information from one flux behavior can be used to predict the other based on the ML method. Based on the results, this paper can provide a better understanding of thermal and mechanical fluxes in semiconductor package patterns for package design and optimization. [ABSTRACT FROM AUTHOR]

• A dynamic model of L-shaped fluid-conveying pipes based on ANCF method is established. • Effects of the radius of the arc section and the fluid velocity on the natural frequency are discovered. • Results of the ANCF method are verified by results obtained by the experiment and simulation. In this study of fluid-conveying pipe dynamics, it is usually assumed that the shape of the pipe is straight. This paper establishes a flow-induced vibration model of an L-shaped pipe based on the absolute nodal coordinate formulation (ANCF), and mainly studies the effects of fluid velocity, structural parameters, and boundary conditions on the vibration characteristics of the pipe. The results show that the fluid velocity will reduce the natural frequency and affect the modal shapes on the basis of causing static deformation of the pipe. After reaching the critical fluid velocity, the modal combination will occur when the fluid velocity continues to increase. Notably, alterations in pipe length, arc radius, wall thickness, eccentricity and boundary conditions exert diverse effects on the natural frequencies of the pipe. In particular, the arc radius is not involved in the previous study of straight and curved pipe dynamics, so it is analyzed emphatically. Among these variables, the fluid velocity is always a key factor affecting the dynamic characteristics. Finally, experiments and finite element software were used to compare the ANCF method, verifying the effectiveness of the method. Therefore, this paper has developed an effective analytical method to study the flow-induced vibration of complex shaped conveying fluid pipes. [ABSTRACT FROM AUTHOR]

Urbanization and the release of carbon emission are two significant features of contemporary economic and social progress in China. However, there are few studies that consider how urbanization policy goals affect carbon emission. This paper aims to study the nonlinear effects of urbanization policy goals on carbon emission in 13 cities of the Beijing-Tianjin-Hebei region. In this paper, a multi-dimensional spatial disturbance grey model is proposed. Based on matrix perturbation theory, this paper explores the spatial perturbation bounds of the novel model and verifies that the spatial property of the model is consistent with the viewpoint of the First Law of Geography. Then, the novel model is used to predict the urban carbon emission under different urbanization policy goal scenarios. The results showed that the novel model has spatial regional correlation in spatial region prediction. With the development of urbanization level, carbon emissions show a downward trend in more than 50% of cities from 2022 to 2025. In addition, the improvement of urbanization policy goals will promote the carbon peak time of most cities. The carbon emission intensity will exhibit an inverted U-shaped trend distribution in space. The research results are conducive to providing scientific guidance for the formulation of new-type urbanization policies and helping to achieve the dual carbon goals. • A multi-dimensional spatial disturbance grey model is proposed. • The novel grey model is consistent with the viewpoint of the First Law of Geography. • The spatial distribution of carbon intensity showed an inverted U-shaped pattern. [ABSTRACT FROM AUTHOR]

We present a general methodology to evaluate the mass moments of two-dimensional domains and axisymmetric solids made of functionally graded materials. The approach developed in the paper is based on the sequence of two steps. First, the original domain integrals are converted to integrals extended to the relevant boundary by exploiting Gauss theorem. Second, for domains having a polygonal or circular shape, the boundary integrals are evaluated analytically by providing algebraic expressions that depend upon the parameters defining the density distribution, the position vectors of the vertices of the polygonal domain or the initial and ending points of an arbitrary circular sector, respectively. While the first step refers to moments of arbitrary order, the second step is limited to the most useful quantities for engineering applications, i.e. generalised mass, static moment and inertia tensor. The formulas derived in the paper are validated by means of examples retrieved from the specialised literature for which analytical results are available or have been specifically derived by the authors. Finally, in order to ascertain the computational savings entailed by the use of the proposed analytical formulas with respect to numerical techniques, the mass moments of a longitudinal section of a human femure, made of a functionally graded material and characterised by a linear density distribution, have been computed. • Mass moments for functionally graded domains expressed by boundary integrals. • Polynomial, exponential and polynomial quadratic density distributions. • General methodology for computing mass moments of order greater than 2. • Analytical evaluation of mass moments for polygonal or circular domains. • Accuracy and computational efficiency of the analytical formulas. [ABSTRACT FROM AUTHOR]

• Exact geometrical shape of tool is involved in the mathematical model. • Friction force comprises the sliding friction force and the rolling friction force. • Plough force is involved in the cutting force model due to the cutting edge radius. Variations in cutting forces significantly influence the tool wear and part quality in machining high-volume SiC-particle-reinforced aluminum matrix (SiCp/Al) composites. Properties of the reinforcement SiC particles, such as size and volume fraction, contribute to the change in the cutting forces. This paper presents a cutting force model based on the geometrical and mechanical nature of the tool and workpiece, considering the effect of the SiC reinforcement particles. The cutting force is predicted as three components (F z , F x , and F y) and the resultant cutting force F τ s. The cutting force was considered to generate three deformed zones: (a) shear deformed zone, (b) friction deformed zone on the chip–tool interface, (c) plow deformed zone. The effect of SiC reinforcement particles on friction deformed zone is analyzed emphatically. The friction force from friction deformed zone was obtained by calculating the sliding friction force and rolling friction force. To verify the feasibility and validity of the predicted model of cutting force, cutting experiments were performed with different combinations of cutting speed, feed rate, depth of cut, and tool nose radius. The predicted cutting force values demonstrate good agreement with the measured experimental cutting force values in most cutting conditions. The average percentages of the prediction error were 1.93%, 6.20%, and 10.48% for the F z , F x , and F y components, respectively, thus proving the validity and accuracy of the predicted model of cutting forces. [ABSTRACT FROM AUTHOR]