Search

Through the comparative study of several enrichment machines ,the performance of the high-speed washer is introduced. The high-speed washer has high dewatering and washing efficiency, he pulp can be concentrated from 0.8% ~ 1.5% consistency to 10% ~ 15%;And it has high ash removal rate and good pulp washing effect also. It can effectively remove the ink particles, fillers, and other small impurities, improve the pulp brightness. At the same time ,the waste paper deinking process treatment systems has been developed.

Paper-based microfluidic devices have recently received increasing attention as a potential platform for its low cost, portability and excellent compatibility with biological samples. A variety of fabrication technologies were employed, including simple photolithography, wax plotting, printing, inkjet etching, plasma etching and so on. Meanwhile, the potential applications of paper-based microfluidic devices in diagnostic, point-of-care (POC), and environmental monitoring were reported. We review the recent progress of fabrication technologies and the applications of paper-based microfluidic devices.

In order to study the corresponding relationship between the design and fashion of tea gift package, this paper will analyze and discuss the color design and packaging style of tea gift package. Besides, this paper will also do research on the cultural origin of tea and the value of package, and analyze the influence of package on consumers. Finally, based on the research, the author had design a tea gift package that is in accordance with the current trend. This study uses bright yellow and orange as predominant colors to present nobleness of tea of Alishan. The colors used on the packaging will render people associate with harvest in autumn.

The quality of product of manufacturing industries depends on dimension accurately and surface roughness quality. There are many types of surface defects and levels of surface roughness quality. Ironing process is one type of metal forming process, which aims to reduce the wall thickness of the cup-shaped or pipes products, thus increasing the height of the wall. Manually surface inspection procedures are very inadequate to ensure the surface in guaranteed quality. To ensure strict requirements of customers, the surface defect inspection based on image processing techniques has been found to be very effective and popular over the last two decades. The paper has been reviewed some papers based on image processing for defect detection. It has been tried to find some alternatives of useful methods for product surface defect detection of ironing process.

Biocomposites sheets were prepared by compression molding from mixtures of corn starch plasticized by glycerol as matrix and cellulose fibers, extracted from used office paper, as reinforcement filler with contents ranging from 0 to 8% wt/wt of fibers to matrix. Properties of composites were determined by mechanical tensile test, differential scanning calorimetry, thermogravimetric analysis, water absorption measurement, and scanning electron microscopy. The results showed that higher fibers content raised the tensile strength and elastic modulus up to 109% and 112%, respectively, when compared to the non-reinforced thermoplastic starch (TPS). The addition of the fibers improved the thermal resistance and decreased the water absorption up to 63.6%. Scanning electron microscopy illustrated a good adhesion between matrix and fibers.

When we think of paper-folding, we usually think first of the name that is usually associated with it: origami. But in the field of architecture, origami is more than just imagining an animal or flower which is what this word usually brings to mind. In architecture, we extend the meaning to take in the real essence of the word – that of great structural and constructional loads. The basic unit of origami – the fold – allows us to start manipulating space and even to create space itself. Paper-folding, with its spatial modelling potential, is to three-dimensionality what drawing is to two-dimensionality. It is after all an ancient Japanese art which encapsulates the advantages of intuitive thinking and fast modelling, once the basic elements of folding are known. Heino Engel (2001) in his book “Structural Systems”, describes intensive studies on types of structures which derive from this systematization. And the architect Ming Tang often uses structures in his projects which clearly originate in the concept of origami, and he correlates these structures with sustainable materials. The architect Michael Hansmeyer manages to incorporate all the beauty of the action of folding with the help of a computer, where the final result is a shape that approaches a real application at an architectural level. Over time, there have been numerous people who have found a relationship between the harmony and proportions of paper-folding and their own studies and projects. What is missing is a single point where clear concepts on the possibilities of folding and the results of those who have experimented with it can be brought together. This cataloguing, which is being carried out in this Master’s dissertation, is intended to be a contribution to the design method in architecture, through which the architect may achieve spatial dexterity over a piece of paper.

This paper presents the performance investigations of the spatial domain image watermarking for camera-captured images on different types of printers and printable materials. We examine the effects of our previous watermarking method based on the modification of image pixels on three types of printers, i.e. inkjet, laser and photo printers, and four different types of printing papers, i.e. uncoated, matte, glossy and semi-glossy papers. In the experiments, the DSLR camera is used as tool to capture the printed watermarked images, while the image registration technique based on projective transformation is used to diminish the RST and perspective distortions in the captured image. The performances in terms of extracted watermark accuracy at equivalent watermarked image quality on different types of printers and printing papers are measured and compared.

Magnetic stripe cards and magnetic recording paper are commonly used in credit cards, identity cards, and transportation tickets. Barium ferrite was used to prepare magnetic inks and the magnetic ink was coated onto the paper substrate to obtain the magnetic papers. The crystal structure of barium ferrite was characterized by X-ray diffraction (XRD) and the magnetic property of barium ferrite was tested by vibrating sample magnetometer (VSM) The performance of the magnetic recording paper and the surface morphology of the coating magnetic layer were also characterized. The results show that the magnetic ink based on barium ferrite with the formula of 41wt% of the barium ferrite powder, 14wt% of polyurethane, 36wt% of solvent and 9wt% of PVP has good printing characteristics and the magnetic recording papers have good performance.

The novel flexible pressure sensor with skin-like stretchability and sensibility has attracted tremendous attention in academic and industrial world in recent years. And it also has demonstrated great potential in the applications of electronic skin and wearable devices. It is significant and challenging to develop a highly sensitive flexible pressure sensor with a simple, low energy consuming and low cost method. In this paper, the silver nanowires (AgNWs) as electrode material were synthesized by polyol process. The polydimethylsiloxane (PDMS) was chosen as a flexible substrate and polyimide (PI) film as dielectric layer. The AgNWs based electrode was prepared in two methods. One is coating the AgNWs on photographic paper followed by in situ PDMS curing. Another one is suction filtration of the AgNWs suspension followed by glass slide transfer and PDMS curing. Then the capacitive pressure sensor was packaged in a sandwich structure with two face to face electrodes and a PI film in the middle. The sensitivity of the sensor as well as the micro-structure of the electrodes was compared and studied. The results indicate that the roughness of the electrode based on AgNWs/PDMS micro-structure plays an important role in the sensitivity of sensor. The as-prepared flexible pressure sensor demonstrates high sensitivity of 0.65kPa-1. In addition, the fabrication method is simple, low energy consuming and low cost, which has great potential in the detection of pulse, heart rate, sound vibration and other tiny pressure.

Langmuir-Blodgett technique was applied to build optically homogeneous film of functionalized multi-walled carbon nanotubes (MWCNTs) on paper substrate. The palladium (Pd) nanoparticles were drop-casted onto MWCNTs network films before being exposed in hydrogen (H2) gas molecules environment under vacuum and atmospheric pressure at room temperature. The results demonstrate that the functionalized MWCNTs dispersed with Pd nanoparticles show good H2sensing response on paper substrate where the sensitivity of around 10 % was recorded at only 2 minutes exposure time.

This paper aimed at the quality of the transparent paper package, developed a machine vision detection system and successfully applied it in production line. A variety of transparent paper defects are detected out. This system makes the transparent paper packing quality b improved and provides good reference for the application of the technology of machine vision detection.

There are too many waste that has the capability in undermine the environment, including paper waste. The unused paper waste collected from one office only could reach two tons a year. To decrease the possibility of paper waste in ruining the environment, it can be recycled to be any usable things. One example is recycle the paper waste into paper brick as building material. Before the brick can be used, it needs to be tested whether it can create a thermal comfort or not. So the objectives of the research are to find the ability of paper brick in create thermal comfort, and compare it with the red brick that is commonly used by people. The method used in this research is field measurement using model and hygrometer as a tool. The result of the research is that the paper brick can create a thermal comfort in some hours of a day. But it turns out that it is not better than the red brick in decreasing the outside temperature. The temperature inside the building with a red brick is lower that the temperature in the building with the paper brick.

Along with the widespread use of food wrap paper, it is very important to discuss the migration of lead in paper. The migration of lead from six kinds of food wrap papers under different temperatures (5 °C, 25°C, 35°C, 60°C and 85°C) were investigated by using water as an imitation in this paper. It was found that the initial migration rate was affected by the sizing degree of paper, but the final migration ratio was mainly decided by initial concentration of lead in paper, and the migration rate increased with the increasing of temperature.

By using printability tester for printing on ordinary white cardboard and light beam hologram paper, measuring spectral information and chrominance information of the two samples, and then perform spectral fitting by analyses their color characteristics, The aim of this research was to propose one method for color calculation of printing on light beam hologram papers, according to the color information of ordinary white cardboard.

Green and environmental protection has become a theme of contemporary furniture design. As a unique furniture material, paper has characteristics like wide source, easy processing, non-toxic and pollution-free. It has been used in the development and design of furniture. Paper furniture has broad application prospects.

In order to improve the printing quality, 10 kinds of different manufacturers, different gram weight offset paper are used in this title, measure the quantitative, thickness, gloss, K&N values, and roughness of those paper. Print papers through IGTAIC2-5, calculate the ink transfer rate and transfer parameters. Using SPSS to analysis relationship between the performance of paper and ink transfer rate, transfer parameter b, k, f ' by using mathematical methods. The research results show that the performance of the paper affect ink transfer rate and transfer parameter b, k, f '; The tightness, roughness ,glossiness and K&N value have notable effect on the ink transfer rate and transfer parameter k; transfer parameter b, f ' has no remarkable influence.

In order to investigate the influence of coating layer characteristics on the dynamic permeability and printing of ink-jet paper, coating was prepared by the precipitated calcium carbonate (PCC) and white latex used as bottom coating (recipe label:A,B),and coating formula was made by silica (SiO2) and polyvinyl alcohol used as surface coating (recipe label:a,b,c).Then paper were coated respectively on single bottom, single surface and multilayer. Then the dynamic permeability and printing of ink-jet paper were analyzed systematically. The results showed that whether single layer or multilayer, the values of Ct, Ci were minimum when the ration of pigment and adhesive was 70:30, because the hole diameter of the coating layer was smallest, and the absorption was strongest, so the dynamic permeability was best, and the ability of ink absorption was best, color density and tone reproducibility were best. It concluded that when the proportion of SiO2 and PVA was 70:30, the dynamic permeability and printing ability of ink-jet paper were relative better.

The bonding mechanism between water-based UV curable ink and active groups on paper’s fiber during curing process was studied in this paper. Low viscosity water-based UV-cured resin was synthesized by epoxy resins, epoxy diluent, acrylic acid and maleic anhydride in the presence of catalyst. The viscosity of the synthesis system and synthetic products were significantly reduced when epoxy diluent was added to replace parts of the epoxy resin. Epoxy diluent was very useful in reducing the viscosity of the product, but over-dose would have negative effects on the quality of the cured film. The water-based epoxy acrylate prepolymer was used as the substitution for the ink to investigate the binding mechanism between the active groups of prepolymer and fiber under UV irradiation. The prepolymer and photoinitiator were mixed and the mixture was diluted to an appropriate viscosity by a small amount of water, then printed on the paper by the method of analog printing and curred by UV curing machine. The printed paper was used to extract lignin by enzymatic/mild acidolysis. FT-IR was used to characterize the changes of the active groups in lignin. The results showed that the changes of active groups in lignin were founded in the existence of ultraviolet and photoinitiator, which consistent with the change of double bonds in prepolymer. The free radicals produced by photoinitiator in curing process not only promoted the double bonds to polymerize, but also accelerated the active groups of lignin binding. Experiments show that chemical bonds exist between them.

The experiment studied effects of paper on the height and glossiness of UV ink-jet 3D printing. The results showed that there all existed penetrations between the 1st ink layer and three kinds of paper, the bigger the roughness and bulk of paper were, the larger the penetration was, and penetration between the 1st ink and paper was obviously larger than that between two ink layers. Penetration between two ink layers was stable, almost not affected by paper. The bigger the roughness and bulk of paper were, the smaller the glossiness of ink layer was. There appeared directional ink strips on ink layer on three kinds of paper, beginning from the 3rd ink layer, there also appeared ink pits on ink layer on paper whose roughness and bulk were the biggest, which showed printer precision was also an important factor for the glossiness, apart from paper. Thus, the tight and smooth paper should be selected in UV ink-jet 3D printing. Before printing, pretreatment should be done to exclude the influence of the 1st ink layer and the ink strips.

Most paper-based 3D color printers are plagued by the problem of slow printing speed, which is caused by the double-sided coloration for A4 office paper during the printing process. In order to resolve this issue, we propose a new fast and reliable coloration algorithm using geometric information in STL file, given the existing slicing methods. During the entire process, the colored surface is determined by D value that represents the positive or negative slope of layer in the 3D model after slicing. Colored inks with corresponding permeability are used to print single-sided or double-sided to accelerate the printing speed. For the given 3D models, the efficiency of the speedup is discussed and qualitatively analyzed. The results show that the proposed algorithm can increase the printing speed of paper-based 3D color printers, based on the existing materials and apparatus, at a lower cost than the common approaches.

The composite SiOx/polymer films are deposited as a top-coatings onto the paper substrates by radio frequency (RF) reactive magnetron co-sputtered two targets, silica and dicyclopentadiene dioxide cured with maleic anhydride (DCPD/MA).The samples prepared by changing PSiO2/PDCPD/MA, the ratio of RF powers density delivered to the individual target from 0.1 to 10 so as to prepare different SiOxcontent coatings. The wettability, mechanical properties, color reproduction printability, chemical characterization of the coatings are discussed in this paper, using contact angle measurements, electronic tensile testing machine, off-set printing test and FTIR. The static contact angle of water ranges from 129.7 to 90.7 o and tensile performance has improved significantly as the ratio of RF powers density change from 0.1 to 10. The ink density and depth of color during off-set printing are visually improved by using papers with hydrophobic surfaces coated composite films.

Tea has been a popular beverage since ancient time and accumulated a great deal of culture. In modern society, tea packaging design attracts a lot of attention. How to reflect the integration of traditional culture and modern culture from the perspectives of shape, pattern and color and cater to consumers needs at home and abroad and make the tea packaging fun has become the key of tea packaging design. The important function of packaging is to attract consumers’ attention and trigger their desire to buy the product. Through the visual design of packaging, it is a vital way to reflect the quality of tea, as well as increase the value of goods. Highlighting the characteristics of tea is the fundamental purpose of packaging. The color, pattern and text attribution are essential element in packaging, meanwhile it conveys the product information. The application of color, pattern and text and other factors in the study make the tea more competitive. It exchanges information between tea and consumer. Good tea packaging can not only improve sales, but also enhance the brand image, and expand spread of traditional tea culture.

This paper describes simulation of combustion characteristics under high ambient and high injection of biodiesel combustion by using CFD simulation. Diesel engine performance and emissions is strongly couple with fuel atomization and spray processes, which in turn are strongly influenced by injector flow dynamics. The principal objective of this research is to seek the effect of temperature and pressure on the spray characteristics, as well as fuel-air mixing characteristics. Experiments were performed in a constant volume chamber at specified ambient gas temperature and pressure. This research was continued with injecting diesel fuel into the chamber using a Bosch common rail system. Direct photography technique with a digital camera was used to clarify the real images of spray pattern, liquid length and vapor penetration. The method of the simulation of real phenomenon of diesel combustion with optical access rapid compression machine is also reviewed and experimental results are presented. The liquid phase of the spray reaches a maximum penetration distance soon after the start of injection, while the vapor phase of the spray continues to penetrate downstream. The condition to which the fuel is affected was estimated by combining information on the block temperature, ambient temperature and photographs of the spray. The increases in ambient pressure inside the chamber resulting in gain of spray area and wider spray angle. Thus predominantly promotes for a better fuel-air mixing. All of the experiments will be conducted and run by using CFD. The simulation will show in the form of images.

In this study, four types of Waste Paper Sludge Ash (WPSA) were explored for use as Supplementary Cementitious Materials (SCM) in binary system. The WPSA use varies in particle size range and surface area however similar in chemical composition. At first stage, Ordinary Portland Cement (OPC) was replaced by WPSA at 5% mass to mass basis as blended cement. Four size of WPSA was prepared which are unsieve, retained at 63μm, retained at 45μm and pan. WPSA blended cement (WPSABC) was introduced from the four size of WPSA that prepared earlier. Water to cement ratio selected was 0.50 and it keep constant at all type of blended cement. When compared with the control mix, result shows that hydration kinetics is affected by the particle size of WPSA. Pan WPSA has slightly higher peak of hydration kinetics and compressive strength of blended cement. At second stage, Pan WPSA was selected to undergo the further investigation on its performance. Pan WPSABC were prepared at replacement level of 5%, 10%, 15% and 20%, mass to mass basis. Same method and w/c ratio was used and compared with control mix. From the result, it is found that the peak for rate of heat evolution of Pan WPSABC occur earlier and slightly lower as compared to OPC. Pan WPSA also achieved it optimum strength at 5% replacement level which is more than control mix.

Compared with the lithography and traditional technology, ink-jet printing technology has huge advantages such as reducing costs, improving production efficiency and reducing environment damage. The silver nanoparticles conductive ink used as core material in ink-jet printing technology has been greatly developed. At present, the conductive inks for printed circuit usually has high sintering temperature, low adhesion, poor mechanical properties, high cost, which limit the further industrial application. In this paper, nano silver pulp was prepared through liquid phase reduction method, and a self-made protective agent ensured that the particle size distribution of silver particles is about 5nm. The above silver pulp was dispersed in the organic resin to get conductive ink with 20% (wt%) silver content. Under 170°Csintering, the electrical conductivity of the ink layer was 1.15×104S/m.

This paper proposed an improved method based on adaptive with threshold wavelet transform denoising, according to image is often affected by noise pollution in the process of acquisition and transmission, compared with the advantages and disadvantages of traditional digital filtering method. It extracts the structure information and details of the image. It can adaptively select wavelet transform of optimal decomposition level and soft threshold to achieve the optimal noise reduction effect. The Simulation results demonstrate that this theory can effectively filter Gaussian noise and Salt and pepper noise, at the same time well protect the image details and achieve better visual effects.

This paper has a brief introduction to a algorithm that can automatically identify the defective cutting region when automatic paper cutter does quality analysis. The algorithm analyzed the characteristics of processed shear mark image,detected defects,found a critical point of defective part ,then a unique regional recognition algorithm was developed based on the basis of the general processing algorithm. The algorithms can pinpoint the region that cutting defects exist according to the coordinates of critical point accurately, improve the efficiency of quality analysis, and also has stated that image processing is available in the regional recognition of automatic paper cutter.

Peer review is a new phenomenon in the process of internationalization of academic journals, but also a worldwide problem. In this paper, the development and practical application of peer review system are sort out, which are based on objective data research of domestic and international academic journals; the problems of network online published papers in practice are analyzed and explored by modern advanced network technology as the application tool, and how scientific orientation are they to play an effective role. The purpose of paper is in order to ensure the impartiality of the academic council, spread rapidly and use information resources, and further promote to enhance the overall level of academic journals.

The paper currency image recognition method based on Gabor filter set is discussed in this paper. According to the paper currency image features, the suitable parameters of Gabor filter set are selected for the extraction of paper currency characteristics, the multi-scale and multi-directional texture characteristics of paper currency image are gotten; then the texture images are meshed, and the row and column projection sum of grid pixels' average grey are calculated, finally, the template match method based on grid projection characteristics is used for paper currency recognition. Experiments show that, this method has strong anti-interference ability, it can raise the recognition rate of old or dirty paper currency greatly, and it costs little time.

Moisture has a detrimental effect on oil-paper insulation life by lowering electrical breakdown strength. How does the space charge behavior of the oil-paper insulation system consisted by oil gap and oil immersed insulation pressboard with different moisture content? The space charge characteristics of the mixed insulation consisted of oil gap and pressboard with three moisture content were investigated using the PEA measurement system. The space charge accumulation behaviors at the interface between oil gap and pressboard were analyzed. The distortion of the electrical field in the oil gap and pressboard was also analyzed. Results show that there are many charges injected into the oil and the pressboard. The charges accumulated at the interface between oil gap and pressboard. The charges accumulated in the mixed insulation system become less with the moisture content increased. The difference of the electric field strength in the oil gap and pressboard become smaller with the moisture content increased.

According to the features of paper currency CIS image, the fuzzy set theory is initial used to improve the contrast of banknote target and background, paper money’s edge pixels are obtained by scanning, and then the sub-pixel edges are fitted by least square method; in the fitting process, the error threshold method is applied for eliminating noisy edge points, then slope correction of paper money is carried out according to the angle of sub-pixel edge line and the note area is extracted, finally, fuzzy enhancement is used for the extracted image again. Experiments show that, this method has good versatility, high accuracy and strong anti-interference ability, it can even extract the paper currency area effectively in the edge deterioration and unfilled corner condition, and the enhanced image is in favor of subsequent paper currency recognition.

This paper focuses on scraps of paper splicing recovery issues. To deal with complex scraps restoration problem, first the image should be changed as pixel grey level binary image, generating binary matrix, and then classify the scraps using SOM neural network data and feature comparison method. Combining with the Euclidean distance discriminant method, we match the scraps of paper with same edges and obtain a complete stitching schematic finally.

The restoration of regular paper fragments can be solved by edge matching. Edge matching is based primarily on the length and location of the break in writing, however, it is possible that the edges of some regular paper fragments are blank. And so the error of restoration is the inevitable. In this case, it needs manual intervention based on the article content and then eliminate errors. Prior to the establishment of a mathematical model, there is a need for binarization of regular paper fragments with Matlab, then establish vector space model and construct edge contrast matrix, get the order after the Q cluster analysis of fragments. Finally the original picturecan be obtained through splicing and restoring in the order.

Most of the scientific research engines utilize the same way to rank scientific research papers (SRP), this way is highly depend on the citation network. The retrieved results of these engines for any keyword contain old papers with the highest citation value. In this paper, we proposed a new and easy to implement ranking algorithm for scientific research papers known as Paper Time Ranking Algorithm (PTRA). PTRA is a new ranking algorithm that depends on three factors to rank its results; paper age, citation index and publication venue. To construct and prove our ranking algorithm we created a web crawler that crawl different scientific search papers databases in the world to collect the information that PTRA needs. Unfortunately, some of this information was missing, such as, the impact factor of the journals. To collect this information, we created another crawler that search the Internet for these journals impact factors. However, to prove our ranking algorithm results, we have compared PTRA with Google scholar ranking algorithm. We used Google scholar, since it has more than 50 million papers and its own system can gather and collect papers in a faster way. Our comparison results show that, citation index has the highest impact on Google scholars ranking algorithm results. Unlike PTRA that gains the paper age a higher impact on the ranked results. However, PTRA depends on the citation index and publication venue to rank the results but with less impact than the paper age.

A novel method of direct aniline multi-interfacial polymerization on paper substrate is introduced in this paper. Cellulose base papers with and without PAE reinforced were discussed. The PANI-paper composites after more than 3 polymerizations had much lower surface resistivity. Their mechanical strength and thermal stability were analyzed by tensile test and GTA. FTIR results explained that there was strong interaction between NH groups in aniline monomers and OH groups in fibers. Conductive composites made with PAE treated paper had both good thermal stability and good mechanical strength with high conductivity.

With the recognition of sustainable development improving gradually, low carbon campus construction has become a trend in international society. The ecological footprint model is a kind of effective method to measure the sustainable development and have some reference for low carbon campus study. Our case study is the ecological footprint of paper consumption in Dalian University of Technology, China. The results show that nearly 481.60 hm2 of ecologically productive lands were needed to support paper consumption and this means that the land consumed by the university is 2.28 times larger than its physical or built-up land. Within 2011 academic year, the reused paper flow was added up to 237.69 tons, of which library contributed the most with 164.98 tons and the remaining 72.71 tons came from secondhand books obtained from last academic year 2010, finally saved nearly 578.33 hm2 of forest land.

For the regular rectangular paper scraps recovery problem, at first, I used the edge detection based on the improved wavelet analysis to numerically describe the outline of words on each of the pieces. Secondly, screening according to the line spacing to find out paper scraps which are located in the edge. Thirdly, do initial matching to select the best line as a benchmark for two-dimensional double match splicing. At last, I used two-dimensional double match to make the whole stitching come out. In this paper, the data would use the 2013 China National University Mathematical Modeling Competition topic B official data. The model not only can solve the problem of this article, also can be used to solve the problem of similar cutting conditions.

This paper analyzed the reconstruction of cross-cut shredded paper coming from a same printed page, built two association degree optimization models (including edge association degree optimization model and the line space one) based on the characteristics of character information on the edge and line space, and provided the concrete solving process and algorithm for the reconstruction of shredded paper. Moreover, the solving process and algorithm were applied in a reconstruction experiment for pieces of shredded paper from China Undergraduate Mathematical Contest in Modeling (CUMCM 2013B). The results showed that this reconstruction method was effective.

College English examination is an important part of university English education, for the difficult problems in the process of examination organization and management, in this paper, the intelligent test paper composition research based on genetic algorithm. First, basic research, including the basic idea of genetic algorithm, algorithm flow and perform operations on groups; then, studies test paper composition model, the test paper problem described as question number, question types, difficulty, discrimination, score, answer time, using the frequency property and other attributes, constituted seven dimensional vector. Finally, test paper composition design, to generate the initial population, fitness function design, operation operator design, algorithm terminates and others, four key steps were designed. The content of this paper to meet the quality and speed requirements of university English test paper composition, and has the advantages of randomness, scientificalness and so on.

Recently, with rapid development of computer/network technology and algorithms for composing test paper, cyber-based online examination system is a practically valuable hot research concern. In the paper, the mathematical model is created for solving problems with the online test paper composition system. Through comparative analysis of merits and shortcomings of various coding schemes, and to overcome the shortcoming that traditional genetic algorithms easily fall into premature convergence, it utilizes the adaptive adjustment method of dynamic parameters and elitist strategy to improve to develop the online test paper forming scheme based on adaptive genetic algorithm. For the selection of each parameter, simulation test is conducted to obtain the solution approximate to the best one.

This paper discusses the regular longitudinalcutting torn scraps of paper splicing. The degree of similarity of two scraps is acquired according to their pixel characteristics. Then this splicing problem can be converted into TSP problem and the Optimization Model can be established. After the leftist torn scrap of paper been found, the remaining paper can be attached one by one according to the pixel characteristics. Finally, the best algorithm of single page Stitching recovery is given by this paper.

In this paper we analysed application status and reasons of recycled paper, researched physical properties, mechanical properties, optical properties, chemical properties and printing adaptability of recycled paper and tested the important indexes . The test data was compared with ordinary offset paper and there is little difference. The result shows recycled paper can be wildly used for offices, book, paper toys etc.

A set of paper defect extraction IP core based on FPGA is introduced in this paper. Relying on FPGA powerful data processing capabilities and parallel architecture, the paper image acquisition, pre-processing and defect extraction function were achieved in an IP core. The IP core has been testing and running in some paper defect detection and recognition systems. As a result the system was stable and reliable which could ensure to achieve a paper defect extraction function. And it contributes to the design of paper defect detection and recognition system.

This paper provides an automatic method of splicing shredded printed paper which was shredded by shredder. A splicing degree function was defined by using bicubic spline technology. Based on the splicing degree function, a 0-1 mixed integer programming model was used to solve the shredded paper splicing problem. The whole solving process was automatic, and the result was perfect.

There are many researches about the effect of oil/paper proportion, testing temperature, AC/DC ratio and other effects on the breakdown characteristics of oil-paper insulation under the composite electric field. However, the breakdown characteristics of oil-paper insulation under the composite electric field in the process of ageing are rarely reported. In this paper, the breakdown characteristics of the oil impregnated insulation paper with different ageing condition under the composite electric field were investigated. Results show that there is no necessary link between the breakdown characteristics and the ageing degree of oil-paper insulation. The breakdown voltage value decreased with the rise of the AC component under the composite electric field. The breakdown voltage with aged paper changed by new paper is slightly higher than that of the aged oil being changed by new oil.

This paper deals with the study of factors which are affecting basis weight sensor measuring accuracy, the Z distance, XY dislocation, air gap temperature, dust and paper grades. The calibration techniques and solving methods of accurately measuring are given. Automatic calibration and range division are combined to improve the accuracy of basis weight sensor, and the BW measuring precision is reasonable. Static accuracy (2σ) is 0.20% and dynamic accuracy (2σ) is 0.25% at the range of 10 g/m2-1500 g/m2.

In order to meet the demand of test paper in the network test system, the paper establishes test paper mathematical model, uses the integer coding strategy, and applies the improved genetic algorithm to the auto-generating test paper module. The results of the test show that the algorithm can complete the intelligent test paper well, and improve it effectively. Key words: auto-generating test paper; genetic algorithm; fitness function

The restoration of regular paper fragments can be solved just as the Traveling Salesman Problem. Paper pretreatment and edge matching are the main steps during the restoration process, which contain binarization, screening between the left and right boundary depending the width of paper margins. For some longer paper fragments, the transverse splicing can be realized with Greed Algorithm. But the algorithm will get a non-ideal restoration for more fine paper fragments. Therefore the noise-suppressed processing before clustering from line to line through projection is essential in order to make sure that the regular English fragments can get the regularity like Chinese characters. The two experiments get an 100% correct rates when using the method combining the improved genetic algorithm for traveling salesman problem.combining the improved genetic algorithm for traveling salesman problem.

The system uses B / S mode and ASP as the web-based support and connects with the SQL Server 2005 database, which realizes the automatic and manual assessment of Photoshop course exam management operations. At the same time, it will be able to generate paper reference to test the difficulty levels of papers.

As traditional Preformatted Paper Printing methods can't adapt to the changes of document style and they have made poor performance on document security, in this paper, we have presented a PDF-based solution for Preformatted Paper Printing. The solution consists of three levels, including data organization layer, template editing and configuration layer, and PDF file generation layer. The data organization layer is mainly to solve the problem of data extraction and summary from heterogeneous databases. The template editing and configuration layer focuses on solving the printing template design and data output mapping problem. The PDF file generation layer is mainly to generate and merge the PDF file using iTextSharp component. The scheme can flexibly adapt to changes in content and style, set up parameters simultaneously to prevent a tamper, and undertake operations such as reprint, archive, distribution and so forth. At last, we have verified the solutions performance by the case of university admission notice-Generating. The result shows that our solution is effective.