Search

The high solid loading slurries with ZnO-Al2O3powders stabilized with polyelectrolytes have been studied. The influence of Sodium poly(acrylate) (PA 30) on the fluidity and stablility of the slurries was investigated. Morphological features of ZnO-Al2O3powders in suspension and fracture surface of green compact were observed using TEM and SEM. The slurries with pH 9 were prepared after milled using ZnO mixed powders and the PA 30 solution of pH 8. As 0.2 wt% PA 30 added, the lowest viscosity and the highest sediment were obtained. ZnO and Al2O3particles had been homogeneous dispersed. The maximum density (66.7 %TD) of green compact was obtained.

With the development of transportation, subway is more and more important to every city, but the security of underground railway track faces with serious challenges. Tunnel excavation cross-section types have rectangle, roundness, arch, composite one and so on. In the tunnel excavation under Feng-tian Road in Chongqing, we chose three cross-section types for obtaining optimal scheme by finite element method (FEM). The efficiency and reliability of the optimized tunnel excavation cross-section were demonstrated by simulation results by FEM software Abaqus, and the tunnel excavation engineering under Feng-tian Road in Chongqing. Hope that this work can provide a reference to other tunnel excavation engineering.

Oxide-dispersion-strengthened (ODS) ferritic alloys are fascinating materials for future fusion power reactors due to these materials would allow a substantial increase of the operating temperature. Y-Ti bioxides strengthened Fe-Cr alloy was produced by mechanical milling (MM) followed by hot pressing (HP). Microstructure changes of the mixed powders during mechanical milling and subsequent hot pressing were structurally characterized by means of scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). The observations of structure of the mixed powders after MM indicated that the powders are fractured and welded with rotation and vibration of container during mechanical milling. And the particle size decreases with increasing milling time. Nanoscale Y-Ti bioxides were formed during the HP process.

The thermal effect arisen from absorbing inclusions is the main factor which causes the damage of optical materials or component irradiated by the longer pulse duration laser. The unsteady heat conduction depends markedly on both the thermal properties of inclusions and the parameters of laser. Based on the differential equation of heat conduction, the temperature distribution caused by single absorbing inclusion is solved by use of finite difference method. The effect of the laser intensity and the pulse duration on temperature field is analyzed in detail. The result demonstrates that the smaller size inclusion and the smaller pulse duration cause relative safe thermal effect, consequently, the less probability to be damaged by thermal effect.

The thermal effect caused by absorbing inclusions irradiated by multi-pulse laser is different from that of single pulse laser. The temperature field induced by multi-pulse laser depends markedly on both inclusion size and pulse duration, and repetition interval of pulse. Based on the differential equation of heat conduction, the temperature field caused by single absorbing inclusion is solved by use of finite difference method. The effect of inclusion size, pulse duration and repetition interval of pulse on the evolution of temperature field at the center of inclusion and interface between inclusion and dielectric are discussed qualitatively.

BZNT (Bi1.5Zn0.5Nb0.5Ti1.5O7) thin films were prepared on Pt/Ti/SiO2/Si substrates by radio frequency (RF) magnetron sputtering in different O2/Ar ranging from 4:16 to 7:13. The structure and surface morphology of BZNT thin films were investigated by x-ray diffraction (XRD) and atom force microscopy (AFM). The analysis of component in BZNT films were carried out by x-ray photoelectron spectroscopy (XPS). The dielectric measurements were conducted on metal-insulator-metal capacitors at the frequency from 100 Hz to 1M Hz. It’s found that the O2/Ar ratios significantly influence the elements content in BZNT thin films and the morphology and dielectric properties of BZNT thin films. At 1M Hz, the dielectric constant of BZNT thin films deposited at O2/Ar ranging from 4:16 to 7:13 is 212, 187, 171, 196, respectively. The BZNT thin film prepared at O2/Ar = 6:14 shows the highest figure of merit for its very low dielectric loss of 0.0024.

Bismuth zinc niobate titanium (Bi1.5Zn0.5 Nb0.5Ti1.5O7) (BZNT) thin films were deposited on PtTiSiO2Si substrates by radio frequency (rf) magnetron sputtering. The microstructure, surface morphology, stress, dielectric and tunable properties of thin films were investigated as a function of initial annealing temperature. It’s found that high initial annealing temperature increases the grain size, dielectric constant and tunability of BZNT films simultaneously and decreases the tensile stress in films. The BZNT thin film annealed from 500 °C to 700 °C shows the highest FOM value of 45.67 with the smallest dielectric loss and upper tunability.