Search

This paper presents a collision algorithm based on frame slots RFID tag identification and prevention, algorithms on performance is more stable, less total cost of the number of time slots. For the anti-collision algorithm for the simulation, the average number of searches were simulated contrast of the number of tags and the number of slots and different algorithms collision situations relations, research results show that this type of algorithm is effective in reducing the identification number of the reader's request to reduce the energy consumed by the reader, particularly suitable for applications in handheld reader today.

This paper presents a lightweight index does not suspend services online update program, and demonstrate the performance of the index update program from the theoretical analysis and experimental data in two ways. A new method of MapReduce existing index methodology based on this design and further discussion are done in the paper, in the index MapReduce and Hadoop MapReduce feasibility aspects, the design flaws through experimentation.

In NC milling tool path reflects all the processing process, the tool path is reasonable or not, related to the workpiece processing quality and production efficiency, through several parts of the typical contour shape analysis, determination method of NC machining tool path, determined by the combination of NC milling tool path, to reduce the surface roughness of the workpiece, improve workpiece processing quality objective.

The surface of workpiece in NC turning process, often encounter the workpiece surface cross quadrant arc, if the use of the same processing methods and ordinary arc, often leads to the emergence of cross quadrant arc machining shape error, through the research of the NC machining of workpiece surface cross quadrant arc, CNC turning reasonable go knife and tool path in NC turning, solve cross quadrant arc, some defects in the surface of the workpiece processing, ensure the machining with circular arc profile theory demands, so as to improve the machining quality and the machining accuracy requirements.

Through the process of NC machining analysis, summed up the points of NC machining process analysis, through the process of a comprehensive and reasonable analysis procedure for CNC turning and CNC programming formulation provides an important basis and guarantee, so as to improve the machining quality and the machining accuracy requirements.

The theory of modern immunology provides a novel idea to study network intrusion detection and defense system. With the concepts of self, nonself, close degree and membership in an intrusion detection and prevention system presented in this paper, a model of detector generation based on immune recognition and redundancy optimization is proposed, in which detectors are generated by clone selection, genetic variation and evolutionary algorithm, as well as the improved redundancy optimization algorithm. The simulation experiments show that the model has higher detection rate and lower false detection rate.

The paper applied the ultrasonic ranging technology into the pipeline obstacle detection system. First, the article uses square waves as driver signal and the threshold detection method to estimate the distance, then replace the square wave with m-sequence because of the unsatisfactorily test results. In order to improve the accuracy of measurement, four coding and three modulation modes are combined. Taking the impulse signal as a carrier wave, construct incentive sequence and detect the obstacles, analyze the results and find out the optimal combination. Finally the reason caused the error is discussed.

Consider the rod on elastic foundation. Its discrete model is the simply connected spring-mass system with partial mass connected to the ground. The inverse mode problem of constructing the physical elements of the system from two eigenpairs, the spring stiffness of the system is considered. The necessary and sufficient conditions for constructing a physical realizable system with positive mass and stiffness elements are established. If these conditions are satisfied, the rod on the elastic foundation may be constructed uniquely. The numerical methods and examples are given finally.

Consider the simply connected spring-mass system with partial mass connected to the ground. The inverse mode problem of constructing the physical elements of the system from two eigenpairs, the grounding spring stiffness and total mass of the system is considered. The necessary and sufficient conditions for constructing a physical realizable system with positive mass and stiffness elements are established. If these conditions are satisfied, the grounding spring-mass system may be constructed uniquely. The numerical methods and examples are given finally.

Flow properties through a single rock fracture are the foundation of researching fluid flow in fractured rock masses. Many researchers at home and abroad are engaging in this subject for the urgent need of engineering practice. This article mainly introduces concepts of roughness, aperture, tortuosity, channeling flow, and influencing factors of stress, temperature, anisotropic, inlet head, scale effect, solution etc. Finally, some research work should be done in future are given.

The mass-normalized stiffness matrix of the star spring-mass system is an arrowhead matrix. Given two eigenpairs of the arrowhead matrix. It is assumed that the total mass of a star spring-mass system is known. The problem of constructing the physical elements of the system from the known data is considered. The necessary and sufficient conditions for the construction of a physical realizable system with positive mass and spring stiffness are established. If these conditions are satisfied, the system may be constructed uniquely.

Given the odd /even degree eigenpair and the even degree eigenpair of a simply connected central symmetric spring-mass system respectively. The inverse mode problem of constructing the physical elements of the system from two eigenpairs and the total mass of the system is considered. The necessary and sufficient conditions for constructing of a physical realizable system with positive mass and stiffness elements are established. If these conditions are satisfied, the simply connected central symmetric spring-mass system may be constructed uniquely. The numerical methods and examples are given finally.