Search

Phospholipids are distinctive, adaptable molecules that are crucial to numerous biological systems. Additionally, their various architectures and amphiphilic characteristics support their unrivaled crucial functions in scientific and industrial applications. Due to their enormous potential for use in the fields of medicine, food, cosmetics, and health, structured phospholipids, which are modified phospholipids, have garnered increased attention. Traditional extraction methods, however, are pricy, resource-intensive, and low-yielding. The process of enzyme-catalyzed conversion is effective for producing several types of structured phospholipase. However, most frequently employed catalytic procedures involve biphasic systems with organic solvents, which have a relatively large mass transfer resistance and are susceptible to solvent residues and environmental effects due to the hydrophobic nature of phospholipids. Therefore, the adoption of innovative, successful, and environmentally friendly enzyme-catalyzed conversion systems provides a new development route in the field of structured phospholipids processing. Several innovative catalytic reaction systems are discussed in this mini-review, including aqueous-solid system, mixed micelle system, water-in-oil microemulsion system, Pickering emulsion system, novel solvent system, three-liquid-phase system, and supercritical carbon dioxide solvent system. However, there is still a glaring need for a thorough examination of these systems for the enzymatic synthesis of structural phospholipids. In terms of the materials utilized, applicability, benefits and drawbacks, and comparative effectiveness of each system, this research establishes further conditions for the system's selection. To create more effective biocatalytic processes, it is still important to build green biocatalytic processes with improved performance. Key points: • The latest catalytic systems of phospholipase D are thoroughly summarized. • The various systems are contrasted, and their traits are enumerated. • Different catalytic systems' areas of applicability and limitations are discussed. [ABSTRACT FROM AUTHOR]

Phospholipids are distinctive, adaptable molecules that are crucial to numerous biological systems. Additionally, their various architectures and amphiphilic characteristics support their unrivaled crucial functions in scientific and industrial applications. Due to their enormous potential for use in the fields of medicine, food, cosmetics, and health, structured phospholipids, which are modified phospholipids, have garnered increased attention. Traditional extraction methods, however, are pricy, resource-intensive, and low-yielding. The process of enzyme-catalyzed conversion is effective for producing several types of structured phospholipase. However, most frequently employed catalytic procedures involve biphasic systems with organic solvents, which have a relatively large mass transfer resistance and are susceptible to solvent residues and environmental effects due to the hydrophobic nature of phospholipids. Therefore, the adoption of innovative, successful, and environmentally friendly enzyme-catalyzed conversion systems provides a new development route in the field of structured phospholipids processing. Several innovative catalytic reaction systems are discussed in this mini-review, including aqueous-solid system, mixed micelle system, water-in-oil microemulsion system, Pickering emulsion system, novel solvent system, three-liquid-phase system, and supercritical carbon dioxide solvent system. However, there is still a glaring need for a thorough examination of these systems for the enzymatic synthesis of structural phospholipids. In terms of the materials utilized, applicability, benefits and drawbacks, and comparative effectiveness of each system, this research establishes further conditions for the system's selection. To create more effective biocatalytic processes, it is still important to build green biocatalytic processes with improved performance. Key points: • The latest catalytic systems of phospholipase D are thoroughly summarized. • The various systems are contrasted, and their traits are enumerated. • Different catalytic systems' areas of applicability and limitations are discussed. [ABSTRACT FROM AUTHOR]

Chitosan derivates with varying degrees of polymerization (DP) have attracted great concern due to their excellent biological activities. Increasing the abundance of chitosanases with different degradation modes contributes to revealing their catalytic mechanisms and facilitating the production of chitosan derivates. However, the identification of endo-chitosanases capable of producing chitobiose and D-glucosamine (GlcN) from chitosan substrates has remained elusive. Herein, an endo-chitosanase (CsnCA) belonging to the GH46 family was identified based on structural analysis in phylogenetic evolution. Moreover, we demonstrate that CsnCA acts in a random endo-acting manner, producing chitosan derivatives with DP ≤ 2. The in-depth analysis of CsnCA revealed that (GlcN)3 serves as the minimal substrate, undergoing cleavage in the mode that occupies the subsites − 2 to + 1, resulting in the release of GlcN. This study succeeded in discovering a chitosanase with distinctive degradation modes, which could facilitate the mechanistic understanding of chitosanases, further empowering the production of chitosan derivates with specific DP. Key points: • Structural docking and evolutionary analysis guide to mining the chitosanase. • The endo-chitosanase exhibits a unique GlcN-producing cleavage pattern. • The cleavage direction of chitosanase to produce GlcN was identified. [ABSTRACT FROM AUTHOR]

A novel chitinase gene of 888 bp from Streptomyces bacillaris was cloned and expressed in Escherichia coli BL21. The purified recombinant enzyme (SbChiAJ103) was identified as the first microbial-derived family 19 endochitinase that showed exochitinase activity. SbChiAJ103 exhibited the substrate preference for N-acetylchitooligosaccharides with even degrees of polymerization and the capability to specifically hydrolyze colloidal chitin into (GlcNAc)2. Mono-methyl adipate was employed as a novel linker for the efficient covalent immobilization of chitinase on magnetic nanoparticles (MNPs). The immobilized SbChiAJ103, SbChiAJ103@MNPs, exhibited superior pH tolerance, temperature stability, and storage stability than free SbChiAJ103. Even after incubation at 45 °C for 24 h, SbChiAJ103@MNPs could retain more than 60.0% initial activity. As a result, the enzymatic hydrolysis yield of SbChiAJ103@MNPs increased to 1.58 times that of free SbChiAJ103. Moreover, SbChiAJ103@MNPs could be reused by convenient magnetic separation. After 10 recycles, SbChiAJ103@MNPs could retain almost 80.0% of its initial activity. The immobilization of the novel chitinase SbChiAJ103 paves the way to the efficient and eco-friendly commercial production of (GlcNAc)2. Key points: • The first microbial GH19 endochitinase with exochitinase activity was reported. • Mono-methyl adipate was first employed to immobilize chitinase. • SbChiAJ103@MNPs showed excellent pH stability, thermal stability, and reusability. [ABSTRACT FROM AUTHOR]

Chitosanase, a glycoside hydrolase (GH), catalyzes the cleavage of β-1,4-glycosidic bonds in polysaccharides and is widely distributed in nature. Many organisms produce chitosanases, and numerous chitosanases in the GH families have been intensely studied. The reported chitosanases mainly cleaved the inter-glucosamine glycosidic bonds, while substrate specificity is not strictly unique due to the existence of bifunctional or multifunctional activity profiles. The promiscuity of chitosanases is essential for the different pathways of biomass polysaccharide conversion and understanding of the chitosanase evolutionary process. However, the reviews for this aspect are completely unknown. This review provides an overview of the promiscuous activities, also considering the substrate and product specificity of chitosanases observed to date. These contribute to important implications for the future discovery and research of promiscuous chitosanases and applications related to biomass conversion. Key points: • The promiscuity of chitosanases is reviewed for the first time. • The current review provides insights into the substrate specificity of chitosanases. • The mode-product relationship and prospect of promiscuous chitosanases are highlighted. [ABSTRACT FROM AUTHOR]

Plectasin is a promising and potent antimicrobial peptide isolated from the fungus Pseudoplectania nigrella which has been heterologously expressed in various hosts. In this study, a four-copy cassette of plectasin was constructed via 2A peptide assembly to further increase its expression level in recombinant Pichia pastoris. The yeast transformant 4Ple-61 harboring four-copy cassette of plectasin could secrete 183.2 mg/L total protein containing 60.8% of plectasin at the flask level within 120 h, which was 2.3 times higher than that of the yeast transformant Ple-6 carrying one-copy cassette of plectasin. Western blot confirmed the significant peptide expression level in the transformant 4Ple-61. Furthermore, it yielded as high as 426.3 mg/L total protein within 120 h during a 5-L fermentation. The purified plectasin shows superior stability and good antimicrobial activity against conventional Staphylococcus aureus ATCC 26,001 and some food-borne antibiotic-resistant S. aureus strains with the MICs ranging from 8 to 32 μg/mL. Therefore, the strategy based on 2A peptide assembly can enhance the expression of plectasin and further expand its application prospect. Key points: • A yeast transformant 4Ple-61 with four-copy cassette of plectasin was constructed. • The plectasin level yield by the transformant 4Ple-61 was boosted by 2.3 times. • The plectasin showed good activity against food-borne antibiotic-resistant S. aureus. [ABSTRACT FROM AUTHOR]

Lycopene is a dark red carotenoid belonging to C40 terpenoids and is widely found in a variety of plants, especially ripe red fruits and vegetables. Lycopene has been shown to reduce the risk of prostate cancer, other cancers, and cardiovascular disease. It is one of the most widely used carotenoids in the healthcare product market. Currently, commercially available lycopene is mainly extracted from tomatoes. However, production of lycopene from plants is costly and environmentally unfriendly. To date, there have been many reports on the biosynthesis of lycopene by microorganisms, providing another route for lycopene production. This review discusses the lycopene biosynthetic pathway and natural and engineered lycopene-accumulating microorganisms, as well as their production of lycopene. The effects of different metabolic engineering strategies on lycopene accumulation are also considered. Furthermore, this work presents perspectives concerning the microbial production of lycopene, especially trends to construct microbial cell factories for lycopene production. Key points: • Recent achievements in the lycopene biosynthesis in microorganisms. • Review of lycopene biosynthetic metabolism engineering strategy. • Discuss the current challenges and prospects of using microorganisms to produce lycopene. [ABSTRACT FROM AUTHOR]

Thermal activity and stability are important characteristics for proteases applied in the detergent, pharmaceutical, food, and other green industries. With the intent to discover thermostable novel proteases, we constructed a fosmid metagenomic library from marine sediments in the East China Sea and isolated a clone endowed with high proteolytic activity from this library. Sequence analysis of the positive subclones allowed the identification of a coding region of 1254 bp related to protease activity. The unrooted phylogenetic tree and alignment results revealed that the sequence might be derived from Anaerolineaceae bacterium and encodes a new member of the peptidase S8A subfamily with the typical catalytic triad Asp119/His150/Ser325. The fusion protein, named pF1AL2, was expressed in Escherichia coli and showed a molecular weight of 35 kDa. pF1AL2 was active in the pH range of 5.0–11.0 with an optimal pH at 10.0 and had high stability under alkaline conditions, retaining more than 95% of its activity after 24 h at pH 11.0. The optimal temperature of pF1AL2 was 80 °C, and it retained nearly 80% of its activity after 6 h at 70 °C, showing great thermal activity and stability. In addition, the enzyme had great salt tolerance (the residual activity when kept in 3 M NaCl was 40%). Its thermal activity and stability, along with its halotolerance and pH-tolerance, indicate the high potential value of pF1AL2 in industrial applications. The exploitation of pF1AL2 could lay the foundation for the development and utilization of proteases with special features from marine resources by a metagenomic strategy. Key points: • A novel protease, pF1AL2, from marine sediments, was screened out by a metagenomic strategy. • The protease pF1AL2 analyzed in silico, cloned, and characterized. • pF1AL2 had an optimal temperature of 80 °C and retained nearly 80% of activity after 6 h at 70 °C. • pF1AL2 had great tolerance for high-temperature and acid, alkaline, and high salt environments. [ABSTRACT FROM AUTHOR]

AgWH50C, an exo-β-agarase of GH50 isolated from Agarivorans gilvus WH0801, plays a key role in the enzymatic production of neoagarobiose, which has great application prospect in the cosmetics and pharmaceutical industry. In contrast, the poor thermostability becomes the main obstructive factor of glycoside hydrolase (GH) family 50 agarases, including AgWH50C. Herein, based on the AgWH50C crystal structure, we designed several mutants by a multiple cross-linked rational design protocol used thermostability predicting softwares ETSS, PoPMuSiC, and HotMuSiC. To our surprise, the mutant K621F increased its relative activity by as much as 45% and the optimal temperature increased to 38 °C compared to that of wild-type, AgWH50C (30 °C). The thermostability of K621F also exhibited a substantial improvement. Considering that the gelling temperature of the agarose is higher than 35 °C, K621F can be used to hydrolyze agarose for neoagarobiose production. [ABSTRACT FROM AUTHOR]

β-Galactosidases have a wide application in the food and pharmaceutical industries. Recently, β-galactosidase was also found to participate in agar degradation. In this study, the second reported agarolytic β-galactosidase was found in the marine bacterium Agarivorans gilvus WH0801 and characterized. The β-galactosidase named AgWH2A (83 kDa) exhibited good activities under optimal hydrolysis conditions of pH 8.0 and 40 °C. AgWH2A could cleave the first D-galactose of agarooligosaccharides from its nonreducing end to produce neoagarooligosaccharides, but could not act on the neoagarooligosaccharides. AgWH2A has great potential in the comprehensive utilization of marine red algae. [ABSTRACT FROM AUTHOR]

Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft.Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft.Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft.Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft.Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft.Graphical abstract: Chitosanases are critical tools for the preparation of active oligosaccharides, whose composition is related to the cleavage pattern of the enzyme. Although numerous chitosanases have been characterized, the glycoside hydrolase (GH) family 5 chitosanases with other activities have rarely been investigated. Herein, a novel and second GH5 chitosanase OUC-Csngly from Streptomyces bacillaris was cloned and further characterized by expression in Escherichia coli BL21 (DE3). Interestingly, OUC-Csngly possessed dual chitosanase and cellulase activities. Molecular docking analysis showed that the C-2 group of sugar units affected the binding of the enzyme to oligosaccharides, which could result in different cleavage patterns toward chito-oligosaccharides (COSs) and cello-oligosaccharides. Further, we characterized OUC-Csngly’s distinctive cleavage patterns toward two different types of oligosaccharides. Meanwhile, endo-type chitosanase OUC-Csngly generated (GlcN) − (GlcN)4 from chitosan, was significantly different from other chitosanases. To our knowledge, this is the first report to investigate the different cleavage patterns of chitosanase for COSs and cello-oligosaccharides.Key points• The molecular docking showed C-2 group of sugar units in substrate affecting the cleavage pattern.• The first chitosanase exhibited different cleavage patterns towards chito- and cello-oligosaccharides.• The groups at C-2 influence the subsite composition of the enzyme’s active cleft. [ABSTRACT FROM AUTHOR]