Search

We propose a novel model for the measurement of a Mueller matrix for biological tissues. Compared with earlier measurement methods, our method can reduce measurement times and can significantly improve measurement efficiency. Our model needs only six intensity measurements to derive all 16 Mueller matrix components of a biological sample in arbitrary pixels. We used the pellicle cell of magnolia as our sample, and the experimental results are identical with those obtained with other methods. We demonstrate that we can obtain Mueller matrix components to recognize different biological tissues in the same visual field rapidly and reliably. OCIS codes: 120.5410, 180.0180.

We describe a novel approach developed for the National Polar-Orbiting Operational Environmental Satellite System/Visible Infrared Imaging Radiometer Suite (VIIRS) to retrieve pixel-level mixed-phase cloud optical thicknesses and effective particle sizes using 0.67, 1.6, 2.25, and 3.7 [micro]m bands reflectance/ radiance. This approach utilizes lookup tables of reflectances constructed from radiative transfer simulations and a numerical iterative search method. The capability of this new approach was demonstrated using Moderate Resolution Imaging Spectroradiometer (MODIS) data as proxy to VIIRS. Two proxy scenes, 14 October 2001 over North Platte, Nebraska, during the ninth Cloud Layer Experiment (CLEX-9) and 9 November 2006 over the Great Lakes and Eastern Canada during the Canadian CloudSat/Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations Validation Project (C3VP), were analyzed. The performance of the mixed-phase retrieval algorithm was assessed by comparison with the MODIS retrieval products, airborne in situ observations during CLEX-9 and CloudSat data during C3VP. OCIS codes: 010.1615, 280.1310.

We propose a spectral imaging method for piecewise 'macropixel' objects, which allows a regular digital camera to be converted into a digital snapshot spectral imager by equipping the camera with only a disperser and a demultiplexing algorithm. The method exploits a 'multiplexed spectrum' intensity pattern, i.e., the superposition of spectra from adjacent different image points, formed on the image sensor of the digital camera. The spatial image resolution is restricted to a macropixel level in order to acquire both spectral and spatial data (i.e., an entire spectral cubet in a single snapshot. Results of laboratory experiments with a special macropixel object image, composed of small, spatially uniform squares, provide to our knowledge a first verification of the proposed spectral imaging method. OCIS codes: 110.4234, 300.6190, 260.2030.

We show that a pixelated lens with appropriate parameters exhibits an apodized point-spread function that originates in the finite size of the pixel's pupil. We evaluate numerically the degree of apodization and the enlargement associated with the point-spread function in terms of the parameters that characterize the pixelated lens.

A compact two-step modified-signed-digit arithmetic-logic array processor is proposed. When the reference digits are programmed, both addition and subtraction can be performed by the same binary logic operations regardless of the sign of the input digits. The optical implementation and experimental demonstration with an electron-trapping device are shown. Each digit is encoded by a single pixel, and no polarization is included. Any combinational logic can be easily performed without optoelectronic and electro-optic conversions of the intermediate results. The system is compact, general purpose, simple to align, and has a high signal-to-noise ratio.

We demonstrate a method of performing the absolute three-flat test by using reflection symmetries of the surfaces and an algorithm for generating the rotation of arrays of pixel data. Most of the operations involve left/right and top/bottom flips of data arrays, operations that are very fast on most frame grabbers and are available on most commercial phase-measuring interferometers. We demonstrate the method with simulated data as well as with actual data from 150-mm-diameter surfaces that are flat to less than 25 nm peak to valley.

We present an architecture in which a multichannel correlator can perform simultaneous optical pattern recognition. Processing in parallel is made possible by use of the different diffraction orders produced by the pixelated structure of the liquid-crystal spatial light modulator employed to display the input scene. We codify additional quadratic phases in the filters to separate the correlation information corresponding to each channel. We demonstrate that the system can recognize different targets simultaneously. Good agreement between experimental and numerically simulated results is obtained. OCIS codes: 070.4550, 200.4960, 070.5010, 200.3050.

We present the design and experimental setup of an optically interconnected smart-pixel network interface chip designed to implement a collisionless multichannel-access control protocol. The design demonstrates the cointegration of optoelectronic pixel modules of various levels of complexity for dense, high-speed interconnection of highly functional digital logic components typical of multiprocessor network routers. Key words: Smart pixels, optoelectronics, optical interconnects, multichannel-access control protocol, network interface.

We describe a smart-pixel circuit that permits the use of a GaAs/AlGaAs multiple quantum well diode to be used both as a detector for data input and a modulator for data output. The module provides the ability to double the number of inputs or outputs to the array and is well suited to cascaded optoelectronic system architectures that require bidirectional communition.

A technique that removes the pixel structure by scrambling the relative phases among multiple spatial spectra is described. Because of the pixel structure of the liquid-crystal-display (LCD) panel, multiple spectra are generated at the Fourier-spectrum plane (usually at the back focal plane of the imaging lens). A transparent phase mask is placed at the Fourier-spectrum plane such that each spectral order is modulated by one of the subareas of the phase mask, and the phase delay resulting from each pair of subareas is longer than the coherent length of the light source, which is approximately 1 [[micro]meter] for the wideband white light sources used in most of LCD's. Such a phase-scrambling technique eliminates the coherence between different spectral orders; therefore, the reconstructed images from the multiple spectra will superimpose incoherently, and the pixel structure will not be observed in the projection image. Key words: Liquid-crystal display, projection display, depixelization, phase-scrambling filter.

We compared multiple-quantum-well modulator-based smart pixels and vertical-cavity-surface-emitting laser (VCSEL) based smart pixels in terms of optical switching power, switching speed, and electric-power consumption. Optoelectronic circuits integrating GaAs field-effect transistors are designed for smart pixels of both types under the condition that each pixel has an optical threshold and gain. It is shown that both types perform maximum throughput of [approximately]3 Tbps/[cm.sup.2]. In regard to design flexibility, the modulator type is advantageous because switching time can be reduced by supplying large electric power, whereas switching time and electric-power consumption are limited to larger than certain values in the VCSEL type. In contrast, in regard to optical implementation, the VCSEL type is advantageous because it does not need an external bias-light source, whereas the modulator type needs bias-light arrays that must be precisely located because the small modulator diameter, Key words: Photonic switching, smart pixels, multiple-quantum-well modulator, vertical-cavity-surface-emitting laser.

One-way transmission of a multipixel image through the multimode optical fiber based on the phase-conjugation principle is realized. A distortion-compensating hologram for each pixel of an image to be transmitted is superposed on a photoplate. Each hologram is recorded with a reference beam of different beam incidence angle to provide proper wave-front correction for each pixel without any interference from other pixels. The reference beams are holographically generated from a photoplate in which small holographic lenslets are aligned in a matrix pattern. Images of up to 25 pixels are transmitted through the fiber experimentally. Key words: Direct image transmission, multimode optical fibers, distortion-compensating hologram.

A physical-optics calculation was performed to study the effects of a microlens array placed over a focal-plane detector array. In certain conditions the light is further concentrated to a spot size that is smaller than the point-spread function of the receiver optics. It is also shown that the microlens refocuses a sinc-squared point-spread function to a shape that is more uniform as well as narrower. Numerical examples were made for the far IR.

Replacing photographic recording by electronic processing has some obvious advantages. An algorithm used for electronic speckle pattern photography is presented, and the reliability and accuracy is analyzed by using computer-generated speckle patterns. The algorithm is based on a two-dimensional discrete cross correlation between subimages from different images. Subpixel accuracy is obtained by a Fourier series expansion of the discrete correlation surface. The accuracy of the algorithm was found to vary in proportion to sigma/n(1 - delta)squared, where sigma is the speckle size, n is the subimage size, and delta is the amount of decorrelation, with negligible systematic errors. For typical values the uncertainty in the displacement is approximately 0.05 pixels. The uncertainty is found to increase with increased displacement gradients.

The focal point of a lens written onto a spatial light modulator can be translated laterally by displacement of the central location of the encoded lens function. We show that the beam can be translated by a fraction of a pixel, in contrast to the expected single-pixel limitation. This increases the positional sensitivity obtainable with this technique. Experimental results are presented. Key words: Fresnel lenses, diffractive optical elements, spatial light modulators, binary optical elements.

A basis-function technique for reconstructing images with missing pixels is described. This technique yields optimal reconstructed image smoothness in that each basis-function width is maximized consistent with an acceptable level of computational effort.

We present a new method for multitemporal synthetic aperture radar image filtering using three-dimensional (3D) adaptive neighborhoods. The method takes both spatial and temporal information into account to derive the speckle-free value of a pixel. For each pixel individually, a 3D adaptive neighborhood is determined that contains only pixels belonging to the same distribution as the current pixel. Then statistics computed inside the established neighborhood are used to derive the filter output. It is shown that the method provides good results by drastically reducing speckle over homogeneous areas while retaining edges and thin structures. The performances of the proposed method are compared in terms of subjective and objective measures with those given by several classical speckle-filtering methods. OCIS codes: 280.6730, 030.6140.