Search

III-Nitride semiconductors face the issue of localized surface states, which causes fermi level pinning and large leakage current at the metal semiconductor interface, thereby degrading the device performance. In this work, we have demonstrated the use of a Self-Assembled Monolayer (SAM) of organic molecules to improve the electrical characteristics of Schottky barrier diodes (SBDs) on n-type Gallium Nitride (n-GaN) epitaxial films. The electrical characteristics of diodes were improved by adsorption of SAM of hydroxyl-phenyl metallated porphyrin organic molecules (Zn-TPPOH) onto the surface of n-GaN. SAM-semiconductor bonding via native oxide on the n-GaN surface was confirmed using X-ray photoelectron spectroscopy measurements. Surface morphology and surface electronic properties were characterized using atomic force microscopy and Kelvin probe force microscopy. Current-voltage characteristics of different metal (Cu, Ni) SBDs on bare n-GaN were compared with those of Cu/Zn-TPPOH/n-GaN and Ni/Zn-TPPOH/n-GaN SBDs. It was found that due to the molecular monolayer, the surface potential of n-GaN was decreased by ∼350 mV. This caused an increase in the Schottky barrier height of Cu and Ni SBDs from 1.13 eV to 1.38 eV and 1.07 eV to 1.22 eV, respectively. In addition to this, the reverse bias leakage current was reduced by 3–4 orders of magnitude for both Cu and Ni SBDs. Such a significant improvement in the electrical performance of the diodes can be very useful for better device functioning. [ABSTRACT FROM AUTHOR]

We report on the synthesis and properties of wafer-scale two-dimensional/three-dimensional (2D/3D) n-SnSe2/n-GaN(0001) heterojunctions. The hexagonal crystal structure of crystalline SnSe2 grown by molecular beam epitaxy was confirmed via in-situ reflection high-energy electron diffraction and off-axis X-ray diffraction. Current-voltage (I-V) measurements of SnSe2/GaN diodes exhibited 9 orders of magnitude rectification, and the SnSe2/GaN heterojunction barrier height was estimated to be 1 eV using capacitance-voltage measurements and internal photoemission measurements. Vertical electronic transport analyzed using temperature-dependent I-V measurements indicates thermionic field emission transport across the junction. This work demonstrates the potential of epitaxial growth of large area high quality 2D crystals on 3D bulk semiconductors for device applications involving carrier injection across 2D/3D heterojunctions. [ABSTRACT FROM AUTHOR]

Gallium nitride nanowires have garnered much attention in recent years due to their attractive optical and electrical properties. An understanding of carrier transport, relaxation, and recombination in these quasi-one-dimensional nanosystems is therefore important in optimizing them for various applications. Here, we present ultrafast optical microscopic measurements on single GaN nanowires. Our experiments, performed while varying the light polarization, excitation fluence, and position, give insight into the mechanisms governing carrier dynamics in these nanosystems. [ABSTRACT FROM AUTHOR]

Etching of gallium nitride for various device applications has attracted much attention; however, previous reports have all been performed in acidic or basic etchant solutions. Herein, we demonstrate how neutral electrolytes such as NaNO3 or NaCl can be used to rapidly etch n-GaN electrochemically and achieve a porous structure that is either vertically aligned or faceted according to the GaN crystallography, in NaNO3 and NaCl, respectively. It is demonstrated that the etching properties of NaNO3 and HNO3 are very similar, showing that the etching process in this system is surprisingly insensitive to pH. This neutral-pH process enables safer and greener GaN etching, as well as opening up the possibility of crystallographic etching of GaN using an anodic process. [ABSTRACT FROM AUTHOR]

We report exceptionally low thresholds (9.1 µJ/cm²) for room temperature lasing at ~450 nm in optically pumped Gallium Nitride (GaN) nanobeam cavity structures. The nanobeam cavity geometry provides high theoretical Q (>100 000) with small modal volume, leading to a high spontaneous emission factor, ß = 0.94. The active layer materials are Indium Gallium Nitride (InGaN) fragmented quantum wells (fQWs), a critical factor in achieving the low thresholds, which are an order-of-magnitude lower than obtainable with continuous QW active layers. We suggest that the extra confinement of photo-generated carriers for fQWs (compared to QWs) is responsible for the excellent performance. [ABSTRACT FROM AUTHOR]

Recent experiments show that GaN/AlGaN high-electron-mobility transistors suffer from significant current collapse, which is caused by an increase in the concentration of traps with energy levels 0.5-0.6 eV below the conduction-band edge. This increase in trap concentration is consistent with thermally activated defect diffusion, but the responsible defect complexes have not been identified. It has been suggested that the defect complex may contain iron because of the proximity of the Fedoped GaN substrate. Here, we report first-principles density-functional calculations of substitutional iron complexes, investigate their properties, and show that the FeGa-VN complex has properties that account for the observed degradation. [ABSTRACT FROM AUTHOR]

The synthesis of single-layer materials relies on suitable substrates. In this paper, we identify suitable substrates for the stabilization and growth of single-layer GaN and characterize the effect of the substrate on the electronic structure of single-layer GaN. We identify two classes of epitaxial substrates, refractory metal diborides and transition-metal dichalcogenides. We find that the refractory diborides provide epitaxial stabilization for the growth and functionalization of single layer GaN. We show that chemical interactions of single layer GaN with the diboride substrates result in n-type doping of the single-layer GaN. Transition-metal dichalcogenides, on the other hand, although epitaxially matched, cannot provide sufficient thermodynamic stabilization for the growth of single layer GaN. Nonetheless, energy band alignments of GaN/metal chalcogenides show that they make good candidates for heterostructures. [ABSTRACT FROM AUTHOR]

In this work, we demonstrate the direct measurement of the strain state at the surface of nanostructures by in-plane X-ray diffraction. GaN tapered nanopillars have been fabricated by dry etching of a highly strained epilayer. The strain of the surface as function of pillar height shows an exponential relaxation which can be described by a single relaxation parameter. Additionally, we have simulated the strain relaxation and distribution of nanopillars. The impact of the pillar geometry on the strain relaxation has been discussed. In agreement with the measurements, an exponential relaxation of the strain is observed. [ABSTRACT FROM AUTHOR]