Search

Aerial cameras are one of the main devices for obtaining ground images in the air. Since the industrial community sets higher requirements of aerial cameras’ self-locating performance yearly using aerial cameras to locate ground targets has become a research hotspot in recent years. Based on the situation that no ground control point exists in target areas, the calculation principle of the aerial remote sensing image positioning algorithm has been analyzed by establishing different positioning models. Several error analysis models of the positioning algorithm based on the total differential method and the Monte Carlo method are established, and relevant factors that cause the positioning error are summarized. The last section proposes the optimization direction of aerial camera positioning algorithms in the future, which are verified by related simulation experiments. This paper provides a certain degree of guidelines in this area for researchers, who can quickly understand the current development and optimization direction of target geo-location algorithms of aerial remote sensing imagery.

Seed cotton compression molding solves the inconvenience of seed cotton transportation and storage after mechanical harvesting. Stress relaxation is closely related to the performance of the compressed seed cotton. In this study, an electronic universal testing machine with a homemade compression device was used to study the stress relaxation characteristics of machine-harvested seed cotton. The stress relaxation model of machine-harvested seed cotton was established, the influence of test factors on the response indexes was analyzed and, finally, stress relaxation characteristics of machine-harvested seed cotton were simulated. Results show that machine-harvested seed cotton stress relaxation characteristics can be described by the five-element Maxwell model. The equilibrium elastic modulus is negatively correlated with moisture content and cross-section dimensions, and the equilibrium elastic modulus is positively correlated with trash content and compression density. The rapid decay time and the residual stress ratio are negatively correlated with moisture content and compression density, but the influence of trash content and cross-section dimensions are limited. The stress relaxation process of machine-harvested seed cotton was simulated using virtual prototype technology, and the maximum error between the experimental and simulated values was obtained as 4.96%. The feasibility of the virtual prototype technique for the viscoelastic simulation of biomaterials was demonstrated.

Motion planning is one of the most important technologies for free-floating space robots (FFSRs) to increase operation safety and autonomy in orbit. As a nonholonomic system, a first-order differential relationship exists between the joint angle and the base attitude of the space robot, which makes it pretty challenging to implement the relevant motion planning. Meanwhile, the existing planning framework must solve inverse kinematics for goal configuration and has the limitation that the goal configuration and the initial configuration may not be in the same connected domain. Thus, faced with these questions, this paper investigates a novel motion planning algorithm based on rapidly-exploring random trees (RRTs) for an FFSR from an initial configuration to a goal end-effector (EE) pose. In a motion planning algorithm designed to deal with differential constraints and restrict base attitude disturbance, two control-based local planners are proposed, respectively, for random configuration guiding growth and goal EE pose-guiding growth of the tree. The former can ensure the effective exploration of the configuration space, and the latter can reduce the possibility of occurrence of singularity while ensuring the fast convergence of the algorithm and no violation of the attitude constraints. Compared with the existing works, it does not require the inverse kinematics to be solved while the planning task is completed and the attitude constraint is preserved. The simulation results verify the effectiveness of the algorithm.

In recent years, applications such as marine search and rescue, border patrol, etc. require electro-optical equipment to have both high resolution and precise geographic positioning abilities. The step and stare working based on a composite control system is a preferred solution. This paper proposed a step and stare system composed of two single-axis fast steering mirrors and a two-axis gimbal. The fast steering mirrors (FSMs) realize image motion compensation and the gimbal completes pointing control. The working principle and the working mode of the system are described first. According to the imaging optical path, the algorithm and control flow of the line of sight (LOS) and image motion compensation are developed. The proposed method is verified through ground imaging and flight tests. Under the condition of flight, the pointing accuracy of the target can be controlled within 15 m. The proposed algorithm can achieve effective motion compensation and get high-resolution images. This achieves high resolution and accurate LOS simultaneously.