Search

The Ag 2 O/Ag 2 CO 3 /multi-walled carbon nanotube (MWNTs) composite photocatalysts were prepared by calcination of the obtained precipitate. The structures and morphology of as-prepared composite photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy, X-ray photoelectron spectroscopy (XPS). The Ag 2 O/Ag 2 CO 3 /MWNTs composite photocatalysts exhibit higher degradation rate of ciprofloxacin (CIP) than the pure Ag 2 CO 3 , Ag 2 O/Ag 2 CO 3 and Ag 2 CO 3 /MWNTs under visible light irradiation. The amount of loaded Ag 2 CO 3 onto MWNTs and calcined time for Ag 2 CO 3 /MWNTs were systematically investigated, and the optimal amount of loaded Ag 2 CO 3 and calcined time of Ag 2 CO 3 /MWNTs are 150 wt% and 10 min, respectively. The highest photocatalytic degradation rate of CIP could reach 76% under optimal conditions. The active species trapping experiments were also analyzed, the results show that the holes are main contributor for the degradation processes of CIP, furthermore the electrons, O 2 − and OH are also crucially influenced the photocatalytic degradation processes of CIP. The possible photocatalytic processes of CIP with Ag 2 O/Ag 2 CO 3 /MWNTs composite photocatalyst are also proposed. [ABSTRACT FROM AUTHOR]

Ag/Ag 3 PO 4 /active carbon (AC) composite photocatalysts were successfully synthesized using the simple deposition and photoinduced methods. The structures, morphology and photocatalytic properties of as-prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy, X-ray photoelectron spectroscopy (XPS). The Ag/Ag 3 PO 4 /AC composite photocatalysts exhibited a conspicuously improved photocatalytic performance for tetracycline (TC) degradation. The optimal conditions of loaded dosage and photoinduced time were investigated, and the results showed that the photoinduced time played an important role in prepared processes, and also that for the loaded dosage of Ag 3 PO 4 . The DRS analysis showed that the composite photocatalysts exhibited strong absorption ability in the visible light range. The radicals trap experiments demonstrated that there were multiple active species during the degrading process of TC. The possible mechanism of improved photocatalytic activity of Ag–Ag 3 PO 4 /AC composite was also proposed. [ABSTRACT FROM AUTHOR]

A multiple transmission channels, heterojunction and 3D PCN/AgBr/rGO photocatalyst was successfully synthetized by introducing the reduced graphene oxide (rGO) covering AgBr onto the surface of 3D porous g-C 3 N 4 (PCN). In PCN/AgBr/rGO, PCN as a semiconductor photocatalyst provides the 3D framework, the heterojunction was formed with AgBr particles and PCN, rGO promotes the electron transfer simultaneously and introduces a multiple transmission channels system to increase the active species. Thanks to the heterojunction formed between PCN and AgBr, resulting rapid separation of photo-generated e − /h + at interface. The 3D PCN/AgBr/rGO nanocomposite exhibits excellent photocatalytic efficiencies for tetracycline (TC) up to 78.4% within 90 min and 2,4-dichlorophenol (2,4-DCP) up to 68.2% within 6 h. The photocatalytic rate of PCN/AgBr/rGO was much higher than 3D PCN (21%), AgBr particles (31%) and most of g-C 3 N 4 -based photocatalysts in TC degradation. Moreover, the PCN/AgBr/rGO shows high photocatalytic stability due to the significantly photocatalytic stability after four photo-degradation cycles. This study highlights the potential application of PCN/AgBr/rGO highly efficient waste water purification. [ABSTRACT FROM AUTHOR]

The 3D hierarchical structure of CdS/Ni-MOF inhibits the agglomeration of CdS, improve light harvesting, increase active surface area, reaction sites, promote charge transfer and separation, which greatly improves the efficiency of CO 2 conversion. However, when the CdS is overloaded and its hierarchical structure is destroyed, the heterostructure plays a major role in improving the performance. Based on the above results, we propose the preliminary mechanism of 20%-CdS/Ni-MOF photocatalytic reduction of CO 2. Firstly, under UV–Vis illumination, Ni-MOF and CdS are excited to produce electrons (e−) and holes (h+). Then, because of the tight interface contact, the e- excited by Ni-MOF could be transferred to CdS with more positive CB, and CdS as the active site could reduce CO 2 to CO more effectively. At the same time, the h+ in the VB of Ni-MOF and CdS participate in the oxidation reaction to produce O 2 and H 2 O 2 , which achieving the elimination of holes. Such charge separation and transfer of the electron-hole pairs facilitate enhanced photocatalytic activity. [Display omitted] • The 3D hierarchical heterostructure was synthesized by a simple strategy. • 20%-CdS/Ni-MOF showed excellent performance in the vapor–solid reaction system. • The hierarchical structure and heterostructure of CdS/Ni-MOF play a synergistic role. Fabricating the hierarchical heterostructure is efficient way for enhancing CO 2 conversion of semiconductor photocatalysts. Herein, a simple strategy has been employed to prepare several 3D hierarchical CdS/Ni-MOF heterostructure photocatalysts, and the selective photoreduction of CO 2 to CO under simulated sunlight in the gas–solid phase reactor. Among the prepared photocatalysts, 20%-CdS/Ni-MOF shows the best CO yield, which was 16 times and 7 times that of Ni-MOF and CdS, respectively. By controlling the morphology of the catalyst, we found that the significant improvement in photocatalytic activity can be ascribed to the synergistic effect of heterostructure in CdS/Ni-MOF and its unique hierarchical structure, which can improve the efficiency of charge transmission and provides abundant active sites, etc. Finally, the preliminary photocatalytic mechanism was discussed by in situ FTIR and liquid ultraviolet spectrophotometer. [ABSTRACT FROM AUTHOR]

Pt@CeO 2 /3DCN heterojunction are prepared by calcination method and photoreduction technology. The enhanced photoreduction of CO 2 performance can be ascribed to the synergistic effects of the oxygen vacancies in CeO 2 for CO 2 activation and heterojunction for electron separation. Besides, Pt nanoparticles (NPs) on CeO 2 /3DCN can further promote the transfer of electrons, resulting in higher photocatalytic activity. • The Pt@CeO 2 /3DCN photocatalyst was successfully synthesized. • Pt@45CeO 2 /3DCN exhibit best ability of CO 2 photoreduction under UV light. • The synergy of CeO 2 and 3DCN improves the photocatalytic performance. The conversion of CO 2 into high value-added carbon-based compounds through photocatalytic reduction technology is considered as one of the more promising strategies to solve the greenhouse effect. And construction of heterojunction photocatalysts can promote the separation of photoelectron-hole pairs, so as to achieve higher activity of photocatalytic CO 2 reduction. Hence, Pt@CeO 2 /3DCN heterojunction are prepared by calcination method and photoreduction technology. The photocatalytic results revealed that Pt@CeO 2 /3DCN show better photocatalytic activity for reducing CO 2 into CO and CH 4 , compared with 3DCN. Especially, Pt@45CeO 2 /3DCN shows the maximum photocatalytic activity of 4.69 and 3.03 μmol·h−1·g−1 for CO and CH 4 under UV light irradiation, respectively, and the reduction activity did not decrease significantly after five cycles. The enhanced photoreduction of CO 2 performance can be ascribed to the synergistic effects of the oxygen vacancies in CeO 2 for CO 2 activation and heterojunction for electron separation. Besides, Pt nanoparticles (NPs) on CeO 2 /3DCN can further promote the transfer of electrons, resulting in higher photocatalytic activity. [ABSTRACT FROM AUTHOR]