Search

Abstract: Bi-doped hollow titania spheres were prepared using carbon spheres as template and Bi-doped titania nanoparticles as building blocks. The Bi-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The effects of Bi content on the physical structure and photocatalytic activity of doped hollow titania sphere samples were investigated. Results showed that there was an optimal Bi-doped content (4%) for the photocatalytic degradation of methylene blue (MB). [Copyright &y& Elsevier]

Abstract: N-doped titania hollow spheres (NTHS) were prepared by a one-pot hydrothermal method using urea as precursor of nitrogen. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), Brunauer–Emmett–Teller (BET), X-ray photoelectron spectroscopy (XPS) and UV–vis diffuse reflectance spectrum (DRS). The photocatalytic activity of as-prepared titania hollow spheres was determined by degradation of Reactive Brilliant Red dye X-3B (C.I. reactive red 2) under visible light irradiation, and was compared to non-doped titania hollow spheres and commercial P25 titania. Results indicated that the as-prepared NTHS showed highest photocatalytic activity. [Copyright &y& Elsevier]

Abstract: A novel photocatalyst (Ce, C-codoped titania) was synthesized through a modified sol–gel method under mild condition. The as-prepared sample was investigated by XRD, SEM, DRS and XPS. It was found that the as-prepared photocatalyst was composed of spheroidal particles, which were smaller than undoped ones. The absorbance spectrum of Ce, C-codoped TiO2 exhibited significant red-shift to visible region. It can be ascribed to appearance of a new electronic state in the middle of the TiO2 band-gap. Furthermore, cerium doping could slow the radiative recombination process of photogenerated electrons and holes in TiO2. Accordingly, for degradation of dye Reactive Brillint Red X-3B (C.I. reactive red 2) under visible light, the photocatalytic activity of Ce, C-codoped TiO2 improved much compared to other samples (C-doped TiO2, undoped TiO2 and P25). [Copyright &y& Elsevier]

Abstract: Nanocrystalline mesoporous titania was synthesized via a combined sol–gel process with surfactant-assisted templating method using cetyltrimethyl ammonium bromide (CTAB) as the structure-directing agent. The process was catalyzed by different acid (hydrochloric acid, nitric acid, sulfuric acid, or phosphoric acid). The prepared samples were characterized by XRD, TEM, BET and FT-IR. The photocatalytic activity of the samples was determined by degradation of phenol in aqueous solution. Results showed that different acid had different effect on the structure and crystal phase of the samples. The sample adjusted by phosphoric acid showed highest surface area and photocatalytic activity. The formation mechanism of the samples catalyzed by different acid was also discussed. [Copyright &y& Elsevier]

Abstract: In this study, different titania films were prepared by a sol–gel spin-coating technique. By introducing nanocarbon spheres into the precursor solution, porous titania film was prepared after calcination at a temperature of 500°C for 3h. The as-prepared porous titania film was characterized by XRD, BET, TEM and SEM. The photocatalytic property of the prepared porous film was evaluated by degrading X-3B under UV irradiation. Results showed that photocatalytic performance of as-prepared porous film was much higher than that of smooth titania and P25 films. [Copyright &y& Elsevier]

Abstract: Bi2O3–TiO2 composite films were synthesized by a sol–gel method under mild condition (i.e. low temperature and ambient pressure). The as-prepared films were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectra and fluorescence spectra. The results showed that Bi2O3–TiO2 composite films were composed of anatase titania and Bi2O3. TiO2 particles were deposited on the surface of Bi2O3 to form uniform film. Incorporating Bi2O3 with TiO2 leads to increased surface OH group density. All Bi2O3–TiO2 composite films exhibited higher photocatalytic activity compared with pure TiO2 under solar irradiation, while the film with Bi/Ti atomic ratio of 1.25% showed the highest photocatalytic activity. Furthermore, the as-prepared films can be reused with little photocatalytic activity decreasing. Without any further treatment besides rinsing, the photocatalytic activity of Bi2O3–TiO2 (1.25%) films was still higher than 77% after six-cycle utilization. [Copyright &y& Elsevier]

Abstract: Anatase titania-activated carbon composite film was prepared by a simple method at low temperature (75°C at most). The film was characterized by XRD, SEM and BET analysis. Results showed that the composite film was porous because it formed a nano-micro structure. The photocatalytic activity of the composite film was determined by degradation of 4-cholophenol (4-CP) under UV irradiation, and was compared to pure titania film and P25 film. It exhibited that the photocatalytic activity of composite film enhanced a lot. The recycle ability of the composite film was also investigated. The degradation ratio which was still higher than 85% after 5 cycles, decreased only 3% compared to the first cycle. [Copyright &y& Elsevier]