Search

A dual-doping strategy was applied to fabricate the novel electrode materials. For the first time, the spinel hybrids of nanosized Ni x Co 1−x Fe 2 O 4 with N-doped graphene (N x -NG) were synthesized by a hydrothermal co-precipitation method. The size of Ni x Co 1−x Fe 2 O 4 (N x) nanoparticles on N-doped graphene can be tuned with the regulation of Ni/Co content. Among these nanocomposites, the Ni 0.4 Co 0.6 Fe 2 O 4 nanoparticles with the smallest average size of 10 nm are uniformly anchored on the N-doped graphene. The electrochemical characterizations display that the N 0.4 -NG exhibits the best electrochemical lithium storage performance compared to other five nanocomposites. It delivers a high capacity of 1367.0 mA h g−1 at the first discharge process，and the reversible capacity retention of 87% (2nd to 50th) at 0.1 A g−1. The excellent electrochemical performance of N 0.4 -NG can be owing to the small size of nanoparticles and its well-combination with N-doped graphene, which provide the large surface area and promote the ion/electron transfer rate. The synergistic effect resulted from the strong interaction between N 0.4 and N-doped graphene is contributed to the enhanced electrochemical performance of N 0.4 -NG. This study not only extends graphene-based electrode materials for lithium ion battery, but also promotes the development of energy resources. Unlabelled Image • A spinel hybrid of nanosized Ni x Co 1-x Fe 2 O 4 with N-doped graphene was fabricated. • Size of Ni x Co 1−x Fe 2 O 4 nanoparticles was tuned with the regulation of Ni/Co content. • A reversible capacity of 785.2 mA h g−1 of N 0.4 -NG after 50 cycles was obtained. [ABSTRACT FROM AUTHOR]

Ultrafine CuS nanoparticles anchored on nitrogen-sulfur co-doped graphene nanosheets are synthesized by a simple-green solvothermal method, the composite has excellent electrochemical performance for CO 2 reduction. [Display omitted] • The CuS/N, S-rGO was synthesized via a facile and environmentally friendly method. • The co-doping of N and S on graphene can promote the activation and conversion of CO 2. • CuS/N, S-rGO exhibits outstanding formate selectivity for CO 2 RR. Electrochemical conversion of CO 2 into hydrocarbons can effectively alleviate the energy crisis and promote carbon cycle. Herein, we report that small-size CuS nanoparticles are confined in nitrogen and sulfur co-doped reduced graphene oxide (CuS/N,S-rGO) for electrochemically reducing CO 2 to formate. Specifically, the CuS/N,S-rGO electrode achieves maximum Faradaic efficiency of 82% for formate formation at −0.63 V versus the reversible hydrogen electrode (RHE). Moreover, this catalyst exhibits a stable performance during 20 h-electrolysis. Experiments demonstrate that the doping of nitrogen and sulfur can create an abundance of active sites on the graphene nanosheets to accelerate the CO 2 reduction reaction (CO 2 RR). The CuS/N,S-rGO electrode exhibits excellent performance for CO 2 RR is attributed to the synergistic effect between N,S-rGO and CuS, and graphene can improve stability of composite. This work provides an efficient electrocatalyst for CO 2 RR and offers a facile and environmental friendly approach to synthesize small-size Cu-based composites. [ABSTRACT FROM AUTHOR]

• Hierarchical layered Fe 3 O 4 QDs@C/rGO array derived from MIL-100(Fe)/GO. • Graphene and mesoporous carbon act as conductive support for anchoring Fe 3 O 4 QDs. • Multi-porous channels increase interface contacts and facilitate ion transportation. • Synergetic effect in Fe 3 O 4 QDs@C/rGO array results in the enhanced LIB performance. Herein, a double-buffering strategy is presented to boost the lithium storage potential of Fe 3 O 4. Firstly, the skeleton of MIL-100 (Fe) MOF is grown on graphene oxide, as a self-assembled template via in-situ solvothermal approach, which transform into ultrafine, well-dispersed and mesoporous carbon coated Fe 3 O 4 QDs (4 nm) imbedded on reduced graphene oxide (Fe 3 O 4 QDs@C/rGO), by pyrolysis. Each component in such a well-designed porous hierarchical structure significantly contributes to the remarkable enhancement of lithium ion storage performance, leading to high reversible capability with excellent prolonged cyclic stability after 2000 cycles (505 mAh g−1 at 2.0 A g−1). Both, Graphene sheets and mesoporous carbon act as conductive support for anchoring uniform Fe 3 O 4 QDs with confined double buffering for cyclic volume flux. Multi-channels with uniform mesopores in the self-assembled array and 4 nm QDs of Fe 3 O 4 confined in conductive carbon shells were favorable to enhance the interfacial electron/ion transfer, leading to the excellent rate and cycling performance with released volume changes upon Li+ insertion/extraction. The present research work provides a promising outset design and synthesis strategies for metal oxide QDs based nanocomposites, which may also be extended to the other electrode material system. [ABSTRACT FROM AUTHOR]