Search

Abstract: The laser surface cladding of an AZ91D magnesium alloy with Al and Al2O3 powders was investigated using a pulsed Nd:YAG laser. The optimum ratio of Al to Al2O3 and the suitable range of laser processing parameters were identified. The resulting microstructure in the modified surface layer was examined and the wear resistance property was evaluated. The results show that the wear resistance of the laser treated samples was much superior to that of the untreated samples. [Copyright &y& Elsevier]

Abstract: The effects of laser surface melting (LSM) on microstructure of magnesium alloy containing Al8.57%, Zn 0.68%, Mn0.15%, Ce0.52% were investigated. In the present work, a pulsed Nd:YAG laser was used to melt and rapidly solidify the surface of the magnesium alloy with the objective of changing microstructure and improving the corrosion resistance. The results indicate that laser-melted layer contains the finer dendrites and behaviors good resistance corrosion compared with the untreated layer. Furthermore, the absorption coefficient of the magnesium alloy has been estimated according to the numeral simulation of the thermal conditions. The formation process of fine microstructure in melted layers was investigated based on the experimental observation and the theoretical analysis. Some simulation results such as the re-solidification velocities are obtained. The phase constitutions of the melted layers determined by X-ray diffraction were β-Mg17Al12 and α-Mg as well as some phases unidentified. [Copyright &y& Elsevier]