Search

In this study, waves propagating through a square array of 16 net cages with different levels of biofouling are numerically studied using a three-dimensional computational fluid dynamics (CFD) model. A porous-media fluid model is adopted to simulate both clean and biofouled netting of a cage array in waves. A numerical wave tank is built, and the oscillating-boundary method is adopted to generate waves. The flow motion is solved by the Navier-Stokes equations, and the free water surface is captured using the volume of fluid (VOF) method. The numerical model is validated by comparing the numerical data with corresponding experimental measurements of a net-cage model with clean netting. To analyze wave attenuation, a numerical analysis of wave elevation both inside and around the cage arrays is presented, which considers the effect of biofouling. Based on the results of the present study, the effect of biofouling on wave elevation is noticeable; the damping effect of the cage array increases with increasing level of biofouling. Furthermore, the incident angle of waves has a noticeable effect on the wave field inside and around the cage array. [ABSTRACT FROM AUTHOR]

In this study, waves propagating through a square array of 16 net cages with different levels of biofouling are numerically studied using a three-dimensional computational fluid dynamics (CFD) model. A porous-media fluid model is adopted to simulate both clean and biofouled netting of a cage array in waves. A numerical wave tank is built, and the oscillating-boundary method is adopted to generate waves. The flow motion is solved by the Navier-Stokes equations, and the free water surface is captured using the volume of fluid (VOF) method. The numerical model is validated by comparing the numerical data with corresponding experimental measurements of a net-cage model with clean netting. To analyze wave attenuation, a numerical analysis of wave elevation both inside and around the cage arrays is presented, which considers the effect of biofouling. Based on the results of the present study, the effect of biofouling on wave elevation is noticeable; the damping effect of the cage array increases with increasing level of biofouling. Furthermore, the incident angle of waves has a noticeable effect on the wave field inside and around the cage array. [ABSTRACT FROM AUTHOR]

With the growth of global population, the demand for seafood has been increasing. Aquaculture as a sustainable industry provides a new direction to satisfy the rising demand for seafood. However, typhoons, a common disaster in coastal areas, can cause massive waves that can threaten the safety of aquaculture facilities. Therefore, studying the facilities' failure probability under typhoon waves with different return periods is crucial. The example of offshore high-density polyethylene net cages in the seas near Guishan Island, Zhuhai, China, was examined in this study. The wave conditions for different return periods for these seas were predicted using the SWAN+ADCIRC model and the local wave statistics for the last 30 years. Based on the prediction results, the hydrodynamic loads and stresses of the primary cage structure (floating collar, nets, and mooring lines) in typhoon waves at different return periods were calculated using the lumped-mass and finite element methods. Meanwhile, the failure probability of the cage components was analyzed based on the Monte Carlo method. According to the failure probability and cost of different components, the suitable size of the each of the cage components in the representative seas was studied. This study affords a reference for the design of the cage and improve the aquaculture insurance. • Relation between typhoon waves and failure probability of HDPE net cage components. • SWAN+ADICRC model combined with local hydrographic data to predict typhoon waves. • Lumped-mass and finite element methods for hydrodynamic loads on components. • Quantitative response relationship established using Monte Carlo method. [ABSTRACT FROM AUTHOR]

A vessel-shaped floating aquaculture platform has numerous advantages over traditional high-density polyethylene gravity cages. Combined with a single-point mooring system, the unique structural form of the vessel shape can significantly reduce the environmental loads transmitted from the bow. This study used potential flow theory and dynamic composite cable theory to simulate the hydrodynamic responses of a single-point moored vessel-shaped floating aquaculture platform in waves. The motion response, mooring force response, and reaction force of the nets were simulated in regular waves and compared with experimental values. The numerical and experimental results agree well. After the validation, the response amplitude operators of the floating frames of the platform were calculated and analyzed in the frequency domain. Then, time-domain calculations were carried out to investigate the hydrodynamic characteristics of the platform. The results show that the heave and pitch responses of the front frame are significantly higher than those of the rear frames of the same platform. The increase in the number of floating frames decreases the motion responses and increases the mooring force response of the platform. The X and Z components of the hinge joint force between the floating front frames are significantly higher than those between the rear frames. Similarly, the reaction force of the nets of the floating front frame is higher than that of the rear frames under the same wave conditions. [ABSTRACT FROM AUTHOR]

Highlights: [•] Interaction between the flow and net cages is simulated using an iterative scheme. [•] Flow through a net cage is studied considering the fluid–structure interaction. [•] Application of the present numerical approach to multiple net cages is presented. [Copyright &y& Elsevier]

Abstract: A three-dimensional (3D) numerical model is established to simulate the flow field inside and around the gravity cages in a current. The realizable k–ɛ turbulence model was chosen to describe the flow, and the governing equations are solved by using the finite volume method. In the numerical model the cylindrical cage is divided into 16 plane nets around the circumference and a bottom net, and the net is modeled using the porous media model. The unknown porous coefficients are determined from the hydrodynamic force on the net under different flow velocities and attack angles using the least squares method. In order to validate the numerical model, the numerical results of the plane nets were compared with the data obtained from two physical model tests. The comparisons show that the numerical results are in good agreement with the experimental data. Using the present model, this paper presents the flow field inside and around the gravity cages with different spacing distances and cage numbers. This study provides information about the flow field inside and around the fishing net cages. [Copyright &y& Elsevier]

Abstract: We conducted experiments and numerical simulations to examine the hydrodynamic characteristics of plane nets in waves. The experiments showed that the effect of K c number (defined in Eq. (3)) on the drag coefficient is insignificant in waves and that the inertia force on the net is much smaller compared to the drag force. We used our experimental results to develop a numerical model to simulate the dynamic behavior of fishing nets in waves. We then compared the simulated and experimental results to evaluate the validity of the numerical model. A comparison of the model and experimental results revealed that the numerical model effectively simulated the hydrodynamic behavior of fishing net in waves. [Copyright &y& Elsevier]

Abstract: In our previous research, the hydrodynamic behavior of a two-dimensional (2D) plane fishing net in current was simulated. Based on the research, a model of a three-dimensional (3D) net is established by using the lumped mass method. To verify the validity of the numerical model, model test results by other authors are cited and compared with the numerical results. The simulated results are in good agreement with experimental ones. In this paper, the 3D net model is applied to investigate the effects of structure size ratio (RDH) and mesh type on the 3D net deformation of the gravity cage in current. The numerical results indicate that the decrease of RDH is practically feasible in improving the cage net deformation. With a sinker system the net deformation with diamond mesh is greater than that with square mesh. When the bottom-collar sinker system is applied, with an increase in current velocity, the net deformation with diamond mesh is less than with square mesh. The results of this study provide a better understanding of the hydrodynamic behavior of the gravity cage. [Copyright &y& Elsevier]