Search

The article present the results of the study on the improvement of mechanical properties of the surface layer of 7075 aluminum alloy via two-stage aging combined with shot peening. The experiments proved that thermo-mechanical treatment may significantly improve hardness and stress distribution in the surface layer. Compressive stresses of 226 MPa±5.5 MPa and hardness of 210±2 HV were obtained for selected samples.

Cast iron and mineral cast are the materials most often used in the machine structural elements design (bodies, housings, machine tools beds etc.). The materials significantly differ in physical and mechanical properties. The ability to suppress vibration is one of the most important factors determining the dynamic properties of the machine and has a significant impact on the machining capabilities of a machine tool. Recent research and development trends show that there is a clear tendency to move away from the traditional iron casting to the mineral casting, due to better dynamic properties of the latter. However mineral cast as a structural material for the whole machine tools bed turns out to be insufficient due to its poor mechanical strength properties. The best solution should benefit from the advantages of the cast iron and mineral cast materials while minimizing their drawbacks. The paper presents numerical modal analysis of two lathe beds: the first one made of gray cast iron and the second one made of hybrid connection of cast iron and mineral cast. The analysis was conducted in order to determine the dynamic properties of two bodies of similar shapes made in the traditional (cast iron) and innovative hybrid (cast iron and mineral cast) technology. In addition, an analysis of the static structure rigidity of the two beds was performed. During the simulation studies it was found a significant increase in dynamic stiffness and static rigidity of the machine tool body made of hybrid connection of cast iron and mineral cast. The results of numerical simulations have confirmed the desirability of using hybrid construction because the dynamic properties of such a body are more advantageous in comparison with the conventional body made of cast iron.