Search

Purpose: Comminuted inferior patellar pole fractures are challenging injuries and require effective treatment due to the extension mechanism of the knee. This study aims to evaluate the outcome of above fractures treated with a modified technique of cerclage-wire-augmented separate vertical wiring (SVW) with cerclage wiring passed through the proximal patella. Methods: Retrospective analysis (1/2017–1/2020) were performed for patients that were treated with three SVWs through the posterior margin of proximal fragment and directly to the anterosuperior border of patella, combined with a cerclage wiring passed through the proximal patella. Patients who experienced comminuted inferior patellar pole fractures within 3 weeks were included, and the outcome was evaluated radiologically and clinically by Bostman score after a minimum of 12 months following surgery. Further evaluation included the operation time and complication rate. Results: A total of 20 patients (10 males, 10 females) with a mean age of 54 ± 14.5 years (26–83 years) and a follow-up of 18.9 ± 6.6 months (12–36 months) were evaluated. The average operation time was 45.7 ± 8.8 min (30–60 min). At final follow-up, the average range of motion was 131.3° ± 3.5° (125°–135°), and the mean Bostman score was 29.4 ± 0.7 points (28–30) and graded excellent in all cases. Two patients experienced occasional giving way of the knee. Radiologically no loss of reduction, implant breakage, nonunion or skin irritation was observed. Conclusions: The cerclage-wire-augmented SVW with cerclage wiring passed through the proximal patella appears to be a safe and simple technique which can effectively treat the comminuted inferior patellar pole fractures. [ABSTRACT FROM AUTHOR]

Background: Acute total hip arthroplasty has gained increasing popularity in the treatment of complex acetabular fractures in elderly patients, but the biomechanical evidence is lacking. Therefore, we measured the primary stability to evaluate whether acute total hip arthroplasty using a multi-hole acetabular cup and posterior column plating through a single K-L approach can safely be used for treating complexed acetabular fractures in the elderly.In 18 composite osteoporotic hemipelves, T-type acetabular fractures were treated in three ways: CSP (Cup with acetabular screws augmentation combined with posterior plate) group, CP (Cup without acetabular screw combined with posterior plate) group and CSPA (Cup with acetabular screws combined with posterior plate and anterior plate) group. Each specimen was dynamically loaded (300 to 1700 N, 1 Hz). Primary stability of the acetabular cup and fracture gap was evaluated by 3-dimensional (3D) micromotions.No significant differences in the 3D-micromotions were observed among the CSP, CP and CSPA groups except the test point on the anterior column of the acetabulum in the CP scenario (CSP 49.33 ± 21.08 μm vs. CP 224.83 ± 52.29 μm, p < 0.001; CSPA 45.50 ± 12.16 μm vs. CP 224.83 ± 52.29 μm, p < 0.001). No significant differences in the fracture gap displacement on the posterior column of acetabulum were observed among the CSP, CP and CSPA groups.Our results show, that acute total hip arthroplasty using a multi-hole cup with acetabular screws and posterior column plating through single a K-L approach offers good primary stability to allow good osseous integration for treating complex acetabular fractures in the elderly. Furthermore, it also provides good fracture gap displacement on the posterior column.Methods: Acute total hip arthroplasty has gained increasing popularity in the treatment of complex acetabular fractures in elderly patients, but the biomechanical evidence is lacking. Therefore, we measured the primary stability to evaluate whether acute total hip arthroplasty using a multi-hole acetabular cup and posterior column plating through a single K-L approach can safely be used for treating complexed acetabular fractures in the elderly.In 18 composite osteoporotic hemipelves, T-type acetabular fractures were treated in three ways: CSP (Cup with acetabular screws augmentation combined with posterior plate) group, CP (Cup without acetabular screw combined with posterior plate) group and CSPA (Cup with acetabular screws combined with posterior plate and anterior plate) group. Each specimen was dynamically loaded (300 to 1700 N, 1 Hz). Primary stability of the acetabular cup and fracture gap was evaluated by 3-dimensional (3D) micromotions.No significant differences in the 3D-micromotions were observed among the CSP, CP and CSPA groups except the test point on the anterior column of the acetabulum in the CP scenario (CSP 49.33 ± 21.08 μm vs. CP 224.83 ± 52.29 μm, p < 0.001; CSPA 45.50 ± 12.16 μm vs. CP 224.83 ± 52.29 μm, p < 0.001). No significant differences in the fracture gap displacement on the posterior column of acetabulum were observed among the CSP, CP and CSPA groups.Our results show, that acute total hip arthroplasty using a multi-hole cup with acetabular screws and posterior column plating through single a K-L approach offers good primary stability to allow good osseous integration for treating complex acetabular fractures in the elderly. Furthermore, it also provides good fracture gap displacement on the posterior column.Results: Acute total hip arthroplasty has gained increasing popularity in the treatment of complex acetabular fractures in elderly patients, but the biomechanical evidence is lacking. Therefore, we measured the primary stability to evaluate whether acute total hip arthroplasty using a multi-hole acetabular cup and posterior column plating through a single K-L approach can safely be used for treating complexed acetabular fractures in the elderly.In 18 composite osteoporotic hemipelves, T-type acetabular fractures were treated in three ways: CSP (Cup with acetabular screws augmentation combined with posterior plate) group, CP (Cup without acetabular screw combined with posterior plate) group and CSPA (Cup with acetabular screws combined with posterior plate and anterior plate) group. Each specimen was dynamically loaded (300 to 1700 N, 1 Hz). Primary stability of the acetabular cup and fracture gap was evaluated by 3-dimensional (3D) micromotions.No significant differences in the 3D-micromotions were observed among the CSP, CP and CSPA groups except the test point on the anterior column of the acetabulum in the CP scenario (CSP 49.33 ± 21.08 μm vs. CP 224.83 ± 52.29 μm, p < 0.001; CSPA 45.50 ± 12.16 μm vs. CP 224.83 ± 52.29 μm, p < 0.001). No significant differences in the fracture gap displacement on the posterior column of acetabulum were observed among the CSP, CP and CSPA groups.Our results show, that acute total hip arthroplasty using a multi-hole cup with acetabular screws and posterior column plating through single a K-L approach offers good primary stability to allow good osseous integration for treating complex acetabular fractures in the elderly. Furthermore, it also provides good fracture gap displacement on the posterior column.Conclusion: Acute total hip arthroplasty has gained increasing popularity in the treatment of complex acetabular fractures in elderly patients, but the biomechanical evidence is lacking. Therefore, we measured the primary stability to evaluate whether acute total hip arthroplasty using a multi-hole acetabular cup and posterior column plating through a single K-L approach can safely be used for treating complexed acetabular fractures in the elderly.In 18 composite osteoporotic hemipelves, T-type acetabular fractures were treated in three ways: CSP (Cup with acetabular screws augmentation combined with posterior plate) group, CP (Cup without acetabular screw combined with posterior plate) group and CSPA (Cup with acetabular screws combined with posterior plate and anterior plate) group. Each specimen was dynamically loaded (300 to 1700 N, 1 Hz). Primary stability of the acetabular cup and fracture gap was evaluated by 3-dimensional (3D) micromotions.No significant differences in the 3D-micromotions were observed among the CSP, CP and CSPA groups except the test point on the anterior column of the acetabulum in the CP scenario (CSP 49.33 ± 21.08 μm vs. CP 224.83 ± 52.29 μm, p < 0.001; CSPA 45.50 ± 12.16 μm vs. CP 224.83 ± 52.29 μm, p < 0.001). No significant differences in the fracture gap displacement on the posterior column of acetabulum were observed among the CSP, CP and CSPA groups.Our results show, that acute total hip arthroplasty using a multi-hole cup with acetabular screws and posterior column plating through single a K-L approach offers good primary stability to allow good osseous integration for treating complex acetabular fractures in the elderly. Furthermore, it also provides good fracture gap displacement on the posterior column. [ABSTRACT FROM AUTHOR]