Search

This paper proposes a ResGA-Net algorithm for cloud top height (CTH) retrieval using FY-4A satellite data. The algorithm utilizes genetic algorithms for data selection and employs a residual module-based neural network for modeling. It takes the spectral channel data from the FY-4A satellite as input features and uses CTH extracted from ground-based millimeter-wave cloud radar reflectivity as the target. By combining the large observation scale of the FY-4A satellite and the high accuracy of ground-based cloud radar observations, the model can generate satellite CTH products with higher precision. To validate the effectiveness of the algorithm, experiments were conducted using data from the Beijing area spanning from January 2020 to January 2022. The experimental results show that the metrics of the proposed ResGA-Net outperform those of various contrastive algorithms, and compared to the original FY-4A CTH product, the RMSE and MAE have decreased by 37.89% and 34.77%, while the PCC and SRCC have increased by 11.17% and 9.47%, respectively, demonstrating the superiority of the proposed method presented in this paper. [ABSTRACT FROM AUTHOR]

Ultraviolet radiation (UV) has strong chemical and biological effects on human health and ecosystems, and it plays an important role in the atmospheric environment by affecting photochemical processes, etc. Clouds and aerosols are the main factors affecting UV radiation and analyzing the quantitative impact of them on UV radiation is of great significance. Using the observation data of UV radiation in Beijing from 2005 to 2020, as well as the data of aerosol optical depth (AOD), single scattering albedo (SSA), and other related parameters, this paper simulated the surface UV radiation in two scenarios of cloudless without aerosol and cloudless with aerosol based on the TUV (Tropospheric Ultraviolet-Visible model), and quantitatively evaluated the attenuation of UV radiation by aerosol and cloud in the Beijing area. The results show that UV radiation is more sensitive to changes in AOD. Fixing the SSA value to 0.9, when the AOD increases from 0.2 to 1.0, the UV radiation decreases from 21.16 W/m2 to 12.64 W/m2 at 12:00; when AOD is maintained at 0.64, the SSA increases from 0.7 to 0.95, and the UV radiation increases from 14.55 W/m2 to 19.91 W/m2. The average annual attenuation rates of ultraviolet radiation by aerosols and clouds from 2005 to 2020 are 30.64% and 40.22%, respectively; the monthly averaged attenuation rates are 30.48% and 42.04%, respectively; and the daily averaged attenuation rates are 31.02% and 50.45%, respectively. [ABSTRACT FROM AUTHOR]

To predict and explore the return period wind speed distribution in Beijing urban area, based on the short-term measured wind speed record, the measured independent storm peak samples are extracted and the Monte–Carlo numerical simulation method is used to randomly generate pseudo-independent storm peak samples with the same distribution as the independent storm peak samples. In addition, the appropriate threshold is used to select and extract the over-threshold independent storm peak samples from the measured samples. And, then, the return period wind speed of the whole wind direction is predicted. Further, the traditional Cook method is used to predict and analyze the return period wind speed of each wind direction according to the measured wind speed data. The results show that the return period wind speed prediction results of the whole wind direction corresponding to the simulated pseudo samples and the measured over-threshold samples are basically close to each other, and the maximum relative deviation is less than 7%. The mean relative deviation of the return period wind speed prediction results is about 10.6% between each wind direction and the whole wind direction, and the mean relative deviation is about 9.4% between the RPWS prediction result of each wind direction and the design value of the code. In addition, the return period wind speed prediction values of the west by southwest, northwest and north by northeast wind directions exceed the design value of the code, while the predicted values of the other wind directions are within the envelope range of the design value of the code. Finally, the research content of this paper can provide some reference for the wind resistance design analysis of building structures in Beijing area. [ABSTRACT FROM AUTHOR]

Based on the mean sea level pressure field and 10-meter wind field across eastern China, weather patterns were classified using principal component analysis in the T-model (T-PCA), and four weather conditions were identified. Weather conditions and meteorological factors affecting the winter PM2.5 concentration in the Beijing–Tianjin–Hebei (BTH) region and the Yangtze River Delta (YRD) were also analyzed. The results showed that there were significant differences in the PM2.5 distribution between BTH and the YRD under different weather conditions. The intensity and path of cold air played important roles in regulating the PM2.5 concentration distribution in eastern China. For the BTH region, under type 2 and type 4 conditions, the weather was stable, and heavy pollution frequently occurred; however, under type 1 and type 3 conditions, cold air was active, and the air quality improved. For the YRD, both type 1 and type 4 conditions lead to high PM2.5 concentrations in this region. Type 1 cold air flows southward along the northwestern path and is beneficial for transporting pollutants from BTH to the YRD, causing a high probability of PM2.5 pollution. Conversely, the southward movement of type 3 cold air along the eastern path was beneficial for pollutant diffusion in the YRD. [ABSTRACT FROM AUTHOR]

Most studies on Chinese dormitories are carried out in summer, while few focus on a transition season or winter. This study evaluated the air quality of a student dormitory in a university in the Beijing area by using a questionnaire survey and on-site measurements. The CO2 concentration was used as an indoor air quality evaluation index to characterize the freshness of the air, and different window opening conditions in the dormitory were simulated, with corresponding improvement plans proposed. The results of this study revealed that the air quality and thermal comfort of the student dormitories during a transition season and winter fell short of expectations. According to the survey, students who opened their windows frequently had a better subjective perception of the air quality. However, due to the large temperature difference between day and night, more than 80% of the students felt too cold when opening the windows. For daytime conditions, the area of unilateral ventilation window opening should not be less than 0.39 m2, the area of bilateral ventilation window opening should not be less than 0.13 m2, and the time taken to close the windows and doors should not exceed the maximum ventilation interval. Empirical equations were fitted for nighttime conditions based on the CO2 concentration, number of people in the room, and window opening area, resulting in a reasonable window opening area of 0.349 m2~0.457 m2. In sum, this study assessed the air quality status within typical university dormitories across varying seasons, gaining a clear understanding of how different ventilation strategies and occupant densities influence air freshness and thermal comfort. Based on these insights, a practical and optimized window area recommendation was formulated to enhance the indoor environmental quality in these dormitories. [ABSTRACT FROM AUTHOR]

Lidar observations of metal layers play a significant role in research on the chemistry and dynamics of the mesosphere and lower thermosphere. This work reports on Fe lidar observations conducted in Beijing and Mohe. Utilizing the same laser emission system, a 1064 nm seed laser was injected into an Nd: YAG laser to generate a single longitudinal-mode pulse 532 nm laser, which pumped a dye laser to produce a 572 nm laser. The 572 nm laser and the remaining 1064 nm fundamental frequency laser passed through a sum–frequency module to generate a 372 nm laser to detect the Fe layer. According to a total of 52.6 h of observations for 10 nights in Beijing, the Fe layer has an average column density of 1.24 × 1010 cm−2, an RMS width of 4.4 km and a centroid altitude of 89.4 km. In Mohe, observed for 16 nights and a total of 91.5 h, the Fe layer has an average column density of 1.08 × 1010 cm−2, an RMS width of 4.6 km and a centroid altitude of 89.5 km. The probability of the occurrence of sporadic Fe layers was 42.4% in Beijing and 29.4% in Mohe. Compared to simultaneously observed Na layers, the occurrence probabilities of sporadic Fe layers were higher than those of sporadic Na layers in both stations. Based on the two cases observed in Beijing, it is conjectured that the formation mechanism of sporadic metal layers above approximately 100 km has a more significant influence on sporadic Fe layers than on sporadic Na layers. The lower thermospheric Fe layers with densities significantly larger than those of the main layer were observed during two nights in Mohe. This work contributes to the refinement of the global distribution of Fe layers and provides abundant observational data for the modeling and study of the metal layers. [ABSTRACT FROM AUTHOR]

The mechanism of aerosol pollution transport remains highly elusive owing to the myriad of influential factors. In this study, ground station data, satellite data, ground-based LiDAR remote sensing data, sounding data, ERA5 reanalysis and a backward trajectory model were combined to investigate the formation process and optical properties of winter aerosol pollution in Beijing and surrounding areas. The analysis of ground station data shows that compared to 2019 and 2021, the pandemic lockdown policy resulted in a decrease in the total number of pollution days and a decrease in the average concentration of particulate matter in the Beijing area in 2020. The terrain characteristics of the Beijing-Tianjin-Hebei (BTH) made it prone to northeast and southwest winds. The highest incidence of aerosol pollution in Beijing occurs in February and March during the spring and winter seasons. Analysis of a typical heavy aerosol pollution process in the Beijing area from 28 February to 5 March 2019 shows that dust and fine particulate matter contributed to the primary pollution; surface air temperature inversion and an average wind speed of less than 3 m/s were conducive to the continuous accumulation of pollutants, which was accompanied by the oxidation reaction of NO2 and O3, forming photochemical pollution. The heavy aerosol pollution was transmitted and diffused towards the southeast, gradually eliminating the pollution. Our results provide relevant research support for the prevention and control of aerosol pollution. [ABSTRACT FROM AUTHOR]

The advantages of performing aerosol retrieval with multi-angle, multi-spectral photopolarimetric measurements over intensity-only measurements come from this technique's sensitivity to aerosols' microphysical properties, such as their particle size, shape, and complex refraction index. In this study, an extended LUT (Look Up Table) algorithm inherited from a previous work based on the assumption of surface reflectance spectral shape invariance is proposed and applied to PARASOL (Polarization and Anisotropy of Reflectances for Atmospheric Science coupled with Observations from a Lidar) measurements to retrieve aerosols' optical properties including aerosol optical depth (AOD) and aerosol fine-mode fraction (FMF). Case studies conducted over East China for different aerosol scenes are investigated. A comparison between the retrieved AOD regional distribution and the corresponding MODIS (Moderate-resolution Imaging Spectroradiometer) C6 AOD products shows similar spatial distributions in the Jing-Jin-Ji (Beijing–Tianjin–Hebei, China's mega city cluster) region. The PARASOL AOD retrievals were compared against the AOD measurements of seven AERONET (Aerosol Robotic Network) stations in China to evaluate the performance of the retrieval algorithm. In the fine-particle-dominated regions, lower RMSEs were found at Beijing and Hefei urban stations (0.16 and 0.18, respectively) compared to those at other fine-particle-dominated AERONET stations, which can be attributed to the assumption of surface reflectance spectral shape invariance that has significant advantages in separating the contribution of surface and aerosol scattering in urban areas. For the FMF validation, an RMSE of 0.23, a correlation of 0.57, and a bias of −0.01 were found. These results show that the algorithm performs reasonably in distinguishing the contribution of fine and coarse particles. [ABSTRACT FROM AUTHOR]