Search

Quinine is a promising building block for creating polymer carriers for intracellular nucleic acid delivery. This is due to its ability to bind to genetic material through intercalation and electrostatic interactions and the balance of hydrophobicity and hydrophilicity dependent on the pH/charge state. Yet, studies utilizing cinchona alkaloid natural products in gene delivery are limited. Herein, we present the incorporation of a quinine functionalized monomer (Q) into block polymer architectures to form self-assembled micelles for highly efficient gene delivery. Q was incorporated into the core and/or the shell of the micelles to introduce the unique advantages of quinine to the system. We found that incorporation of Q into the core of the micelle resulted in acid-induced disassembly of the micelle and a boost in transfection efficiency by promoting endosomal escape. This effect was especially evident in the cancerous cell line, A549, which has a more acidic intracellular environment. Incorporation of Q into the shell of the micelles resulted in intercalative binding to the genetic payload as well as larger micelle-DNA complexes (micelleplexes) from the hydrophobicity of Q in the shell. These factors enable the micelleplexes to be more resistant to serum and have more persistent protein expression post-transfection. Overall, this study is the first to demonstrate the benefits of including quinine functionalities into self-assembled micelles for highly efficient gene delivery and presents a platform for inclusion of other natural products with similar properties into micellar systems.

Cationic polymers offer an alternative to viral vectors in nucleic acid delivery. However, the development of polymer vehicles capable of high transfection efficiency and minimal toxicity has remained elusive, and continued exploration of the vast design space is required. Traditional single polymer syntheses with large monomer bases are very time-intensive, limiting the speed at which new formulations are identified. In this work, we present an experimental method for the quick probing of the design space, utilizing a combinatorial set of 90 polymer blends, derived from 6 statistical copolymers, to deliver pDNA. This workflow facilitated rapid screening of polyplex compositions, successfully tailoring polyplex hydrophobicity, particle size, and payload binding affinity. This workflow identified blended polyplexes with high levels of transfection efficiency and cell viability relative to single copolymer controls and commercial JetPEI, indicating synergistic benefits from copolymer blending. Polyplex composition was coupled with biological outputs to guide the synthesis of single terpolymer vehicles, with high-performing polymers P10 and M20, providing superior transfection of HEK293T cells in serum-free and serum-containing media, respectively. Machine learning coupled with SHapley Additive exPlanations (SHAP) was used to identify polymer/polyplex attributes that most impact transfection efficiency, viability, and overall effective efficiency. Subsequent transfections on ARPE-19 and HDFn cells found that P10 and M20 were surpassed in performance by M10, contrasting with results in HEK293T cells. This cell type dependency reinforced the need to evaluate transfection conditions with multiple cell models to potentially identify moieties more beneficial to delivery in certain tissues. Overall, the workflow employed can be used to expedite the exploration of the polymer design space, bypassing extensive synthesis, and to develop improved polymer delivery vehicles more readily for nucleic acid therapies.

Nanodroplet formation is important to achieve supersaturation of active pharmaceutical ingredients (APIs) in an amorphous solid dispersion. The aim of the current study was to explore how polymer composition, architecture, molar mass, and surfactant concentration affect polymer-drug nanodroplet morphology with the breast cancer API, GDC-0810. The impact of nanodroplet size and morphology on dissolution efficacy and drug loading capacity was explored using polarized light microscopy, dynamic light scattering, and cryogenic transmission electron microscopy. Poly( N -isopropylacrylamide- stat - N,N -dimethylacrylamide) (PND) was synthesized as two linear derivatives and two bottlebrush derivatives with carboxylated or PEGylated end-groups. Hydroxypropyl methylcellulose acetate succinate grade MF (HPMCAS-MF) and poly(vinylpyrrolidone- co -vinyl acetate) (PVPVA) were included as commercial polymer controls. We report the first copolymerization synthesis of a PVPVA bottlebrush copolymer, which was the highest performing excipient in this study, maintaining 688 μg/mL GDC-0810 concentration at 60 wt % drug loading. This is likely due to strong polymer-drug noncovalent interactions and the compaction of GDC-0810 along the PVPVA bottlebrush backbone. Overall, it was observed that the most effective formulations had a hydrodynamic radius less than 25 nm with tightly compacted nanodroplet morphologies.

Nucleic acid-based medicines and vaccines are becoming an important part of our therapeutic toolbox. One key genetic medicine is antisense oligonucleotides (ASOs), which are short single-stranded nucleic acids that downregulate protein production by binding to mRNA. However, ASOs cannot enter the cell without a delivery vehicle. Diblock polymers containing cationic and hydrophobic blocks self-assemble into micelles that have shown improved delivery compared to linear nonmicelle variants. Yet synthetic and characterization bottlenecks have hindered rapid screening and optimization. In this study, we aim to develop a method to increase throughput and discovery of new micelle systems by mixing diblock polymers together to rapidly form new micelle formulations. We synthesized diblocks containing an n -butyl acrylate block chain extended with cationic moieties amino ethyl acrylamide (A), dimethyl amino ethyl acrylamide (D), or morpholino ethyl acrylamide (M). These diblocks were then self-assembled into homomicelles (A100, D100, and M100)), mixed micelles comprising 2 homomicelles (MixR%+R'%), and blended diblock micelles comprising 2 diblocks blended into one micelle (BldR%R'%) and tested for ASO delivery. Interestingly, we observed that mixing or blending M with A (BldA50M50 and MixA50+M50) did not improve transfection efficiency compared to A100; however, when M was mixed with D, there was a significant increase in transfection efficacy for the mixed micelle MixD50+M50 compared to D100. We further examined mixed and blended D systems at different ratios. We observed a large increase in transfection and minimal change in toxicity when M was mixed with D at a low percentage of D incorporation in mixed diblock micelles (i.e., BldD20M80) compared to D100 and MixD20+M80. To understand the cellular mechanisms that may result in these differences, we added proton pump inhibitor Bafilomycin-A1 (Baf-A1) to the transfection experiments. Formulations that contain D decreased in performance in the presence of Baf-A1, indicating that micelles with D rely on the proton sponge effect for endosomal escape more than micelles with A. This result supports our conclusion that M is able to modulate transfection of D, but not with A. This research shows that polymer blending in a manner similar to that of lipids can significantly boost transfection efficiency and is a facile way to increase throughput of testing, optimization, and successful formulation identification for polymeric nucleic acid delivery systems.

Herein, we examine the ASO-mediated gene silencing efficiency of pH-responsive micelles, by incorporating 2-(diisopropylamino)ethyl methacrylate (DIP) into the micelle core and comparing physical and biological properties with non-pH-responsive micelles. Additionally, the lipophilic effect of the micelle cores was examined in both types of micelles. Varying lipophilicity was achieved by varying alkyl monomer chain lengths─butyl (4), lauryl (12), and stearyl (18) methacrylate. Each of the micelles formed within our family offered the added benefit of well-defined and uniform templates for loading antisense oligonucleotide (ASO) payloads. Overall, the micelles followed previously established trends of outperforming their linear polymer (nonmicelle) analogs and ASO only control. More specifically, the highest performing micelles were the pH-responsive micelles with longer alkyl chains or higher lipophilicity─D-DIP+LMA and D-DIP+SMA (∼90% silencing). These two micelles demonstrated silencing efficiencies similar to Jet-PEI and Lipofectamine 2000 and caused lower toxicity than Lipofectamine 2000. The shortest alkyl chain pH-responsive micelle, D-DIP+BMA (64%), displayed strong gene silencing similar to that about that of its non-pH-responsive micelle, D-BMA (68%), and the pH-responsive micelle without an alkyl chain incorporated, D-DIP (59%). This work illuminates a minimum alkyl chain length dependence to allow gene silencing within our micelle family. However, including only longer alkyl chains into the micelle core without the pH-responsive unit DIP had a hindering effect, thus demonstrating the requirement of the DIP unit when including longer alkyl chain lengths. This work demonstrates the exemplary gene silencing efficiencies of polymeric micelles and uncovers the relationship between pH responsiveness and performance with lipophilic polymer micelles for enhancing ASO-mediated gene silencing.

Antisense oligonucleotides (ASOs) are an important emerging therapeutic; however, they struggle to enter cells without a delivery vehicle, such as a cationic polymer. To understand the role of polymer architecture for ASO delivery, five linear polymers and five diblock polymers (capable of self-assembly into micelles) were synthesized with varying cationic groups. After complexation of each polymer/micelle with ASO, it was found that less bulky cationic moieties transfected the ASO more effectively. Interestingly, however the ASO internalization trend was the opposite of the transfection trend for cationic moiety, indicating internalization is not the major factor in determining transfection efficiency for this series. Micelleplexes (micelle-ASO complexes) generally enable higher transfection efficacy as compared to polyplexes (linear polymer-ASO complexes). Additionally, the order of addition of cells and complexes was explored. Linear polyplexes showed better transfection efficiency in adhered cells, whereas micelleplexes delivered the ASO more efficiently when the cells and micelleplexes were added simultaneously. This phenomenon may be due to increased cell-complex interactions as micelleplexes have increased colloidal stability compared to polyplexes. These findings emphasize the importance of polymer composition and architecture in governing the cellular interactions necessary for transfection, thus allowing advancement in the design principles for nonviral nucleic acid delivery formulations.

Fast, efficient, and inexpensive methods for delivering functional nucleic acids to primary human cell types are needed to advance regenerative medicine and cell therapies. Plasmid-based gene editing (such as with CRISPR-Cas9) can require the delivery of plasmids that are large (∼9.5-13 kbp) in comparison to common reporter plasmids (∼5-8 kbp). To develop more efficient plasmid delivery vehicles, we investigated the effect of plasmid size on the transfection of primary human dermal fibroblasts (HDFs) and induced pluripotent stem cells (iPSCs) using a heparin-treated trehalose-containing polycation (Tr4-heparin). Transfections with 4.7 kbp to 10 kbp plasmids exhibited high rates of polyplex internalization with both plasmid sizes. However, transfection with the large plasmid was nearly eliminated in HDFs and significantly reduced in iPSCs. Molecular additives were used to probe intracellular barriers to transfection. Chloroquine treatments were used to destabilize endosomes, and dexamethasone and thymidine were used to destabilize the nuclear envelope. Destabilizing the nuclear envelope resulted in significantly increased large-plasmid-transfection, indicating that nuclear localization may be more difficult for large plasmids. To demonstrate the potential clinical utility of this formulation, HDFs and iPSCs were treated with to dexamethasone-Tr4-heparin polyplexes encoding dCas9-VP64, synthetic transcription activator, targeted to collagen type VII. These transfections enhanced collagen expression in HDFs and iPSCs by 5- and 20-fold, respectively, compared to an untransfected control and were the more effective than the Lipofectamine 2000 control. Functional plasmid transfection efficiency can be significantly improved by nuclear destabilization, which could lead to improved development of nonviral vehicles for ex vivo CRISPR-Cas9 gene editing.

Synthetic polymers have enabled amorphous solid dispersions (ASDs) to emerge as an oral delivery strategy for overcoming poor drug solubility in aqueous environments. Modern ASD products noninvasively treat a range of chronic diseases (for example, hepatitis C, cystic fibrosis, and HIV). In such formulations, polymeric carriers generate and maintain drug supersaturation upon dissolution, increasing the apparent drug solubility to enhance gastrointestinal barrier absorption and oral bioavailability. In this Review, we outline several approaches in designing polymeric excipients to drive interactions with active pharmaceutical ingredients (APIs) in spray-dried ASDs, highlighting polymer-drug formulation guidelines from industrial and academic perspectives. Special attention is given to new commercial and specialized polymer design strategies that can solubilize highly hydrophobic APIs and suppress the propensity for rapid drug recrystallization. These molecularly customized excipients and hierarchical excipient assemblies are promising toward informing early-stage drug-discovery development and reformulating existing API candidates into potentially lifesaving oral medicines for our growing global population.

A series of 3-guanidinopropyl methacrylamide (GPMA)-based polymeric gene delivery vehicles were developed via aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymers have been evaluated for their cellular internalization ability, transfection efficiency, and cytotoxicity. Two homopolymers: P(GPMA 20 ), P(GPMA 34 ), were synthesized to study the effect of guanidium polymer length on delivery efficiency and toxicity. In addition, an N-acetyl-d-galactosamine (GalNAc)-based hydrophilic block was incorporated to produce diblock polymers, which provides a neutral hydrophilic block that sterically protects plasmid-polymer complexes (polyplexes) from colloidal aggregation and aids polyplex targeting to hepatocytes via binding to asialoglycoprotein receptors (ASGPRs). Polyplexes formed with P(GPMA x ) (x = 20, 34) homopolymers were shown to be internalized via both energy-dependent and independent pathways, whereas polyplexes formed with block polymers were internalized through endocytosis. Notably, P(GPMA x ) polyplexes enter cells very efficiently but are also very toxic to human hepatocellular carcinoma (HepG2) cells and triggered cell apoptosis. In comparison, the presence of a carbohydrate block in the polymer structures reduced the cytotoxicity of the polyplex formulations and increased gene delivery efficiency with HepG2 cells. Transfection efficiency and toxicity studies were also carried out with HEK 293T (human embryonic kidney) cells for comparison. Results showed that polyplexes formed with the P(GPMA x ) homopolymers exhibit much higher transfection efficiency and lower toxicity with HEK 293T cells. The presence of the carbohydrate block did not further increase transfection efficiency in comparison to the homopolymers with HEK 293T cells, likely due to the lack of ASGPRs on the HEK 293T cell line. This study revealed that although guanidinium-based polymers have high membrane permeability, their application as plasmid delivery vehicles may be limited by their high cytotoxicity to certain cell types. Thus, the use of cell penetrating structures in polyplex formulations should be used with caution and carefully tailored toward individual cell/tissue types.

A class of cationic poly(alkylamidoamine)s (PAAAs) containing lipophilic methylene linkers were designed and examined as in vitro plasmid DNA (pDNA) delivery agents. The PAAAs were synthesized via step-growth polymerization between a diamine monomer and each of four different diacid chloride monomers with varying methylene linker lengths, including glutaryl chloride, adipoyl chloride, pimeloyl chloride, and suberoyl chloride, which served to systematically increase the lipophilicity of the polymers. The synthesized polymers successfully complexed with pDNA in reduced serum medium at N/P ratios of 5 and greater, resulting in polyplexes with hydrodynamic diameters of approximately 1 μm. These polyplexes were tested for in vitro transgene expression and cytotoxicity using HDFa (human dermal fibroblast), HeLa (human cervical carcinoma), HMEC (human mammary epithelial), and HUVEC (human umbilical vein endothelial) cells. Interestingly, select PAAA polyplex formulations were found to be more effective than Lipofectamine 2000 at promoting transgene expression (GFP) while maintaining comparable or higher cell viability. Transgene expression was highest in HeLa cells (∼90% for most formulations) and lowest in HDFa cells (up to ∼20%) as measured by GFP fluorescence. In addition, the cytotoxicity of PAAA polyplex formulations was significantly increased as the molecular weight, N/P ratio, and methylene linker length were increased. The PAAA vehicles developed herein provide a new delivery vehicle design strategy of displaying attributes of both polycations and lipids, which show promise as a tunable scaffold for refining the structure-activity-toxicity profiles for future genome editing studies.

Employing theranostic nanoparticles, which combine both therapeutic and diagnostic capabilities in one dose, has promise to propel the biomedical field toward personalized medicine. This review presents an overview of different theranostic strategies developed for the diagnosis and treatment of disease, with an emphasis on cancer. Herein, therapeutic strategies such as nucleic acid delivery, chemotherapy, hyperthermia (photothermal ablation), photodynamic, and radiation therapy are combined with one or more imaging functionalities for both in vitro and in vivo studies. Different imaging probes, such as MRI contrast agents (T(1) and T(2) agents), fluorescent markers (organic dyes and inorganic quantum dots), and nuclear imaging agents (PET/SPECT agents), can be decorated onto therapeutic agents or therapeutic delivery vehicles in order to facilitate their imaging and, in so doing, gain information about the trafficking pathway, kinetics of delivery, and therapeutic efficacy; several such strategies are outlined. The creative approaches being developed for these classes of therapies and imaging modalities are discussed, and the recent developments in this field along with examples of technologies that hold promise for the future of cancer medicine are highlighted.

The development of novel macromolecular contrast agents that offer enhanced relaxivity profiles at high magnetic fields have the potential to greatly improve the diagnosis, understanding, and treatment of disease. To this end, we have designed a monodiperse paramagnetic beta-cyclodextrin click cluster decorated with seven paramagnetic arms. A novel alkyne-functionalized diethylenetriaminetetraacetic acid (DTTA) chelate (6) has been created and coupled to a per-azido-beta-cyclodextrin core (7) to yield the precursor macromolecule (8). After removal of the protecting groups and titrating with Gd (3+), the final paramagnetic click cluster, Gd10, was obtained. Luminescence measurements were carried out in H 2O and D 2O on an analogous structure, Eu10, and indicated that at each lanthanide has an average of 1.8 water exchange sites, which is important for enhancing relaxivity and MRI resolution. This discrete paramagnetic click cluster yields a high relaxivity profile (43.4 mM (-1) s (-1) per molecule and 6.2 mM (-1) s (-1) per Gd (3+) at 9.4 T) and enhanced contrast on a human MRI scanner as compared to a commercial agent, Magnevist (3.2 mM (-1) s (-1) at 9.4 T). Moreover, the useful inclusion properties exhibited by beta-cyclodextrin also make this an excellent host scaffold to functionalize via noncovalent assembly with receptor specific targeting moieties for biomolecular imaging.

Herein, two new series of poly(glycoamidoamine)s (branched and linear) have been synthesized by polycondensation. The polymer repeat units have been designed to contain D-glucaramide, meso-galactaramide, D-mannaramide, or L-tartaramide structures and five or six ethyleneamine units to investigate the amine density effects on the bioactivity as compared to a similar series of poly(glycoamidoamine)s previously described that contain four ethyleneamines. These delivery vehicles were created to examine the effects that the number of secondary amines in the polymer repeat unit and the polymer structure (branched and linear) have on plasmid DNA (pDNA) binding affinity, polyplex formation, cell viability, and gene expression in the absence and presence of serum in the culture medium. The results reveal that the new polymers with higher amine density in the repeat unit do not significantly enhance the transfection efficiency compared to that of previous models containing four ethyleneamines, but an increase in cytotoxicity is noticed. Linear polymers reveal higher pDNA neutralization efficacy, gene expression, and toxicity than the branched versions containing a similar chemical structure, which may be caused by a higher protonation of the amine groups. With these new vectors, some interesting trends emerged. The galactaramide and tartaramide analogues revealed higher delivery efficiency than the glucaramide and mannaramide structures. In addition, the branched and linear structures containing five ethyleneamines in the repeat unit formed polyplexes at higher N/P ratios, which had lower zeta potential and lower delivery efficacy than the analogues with six ethyleneamines, and also the linear structures generally revealed higher delivery efficiency and toxicity when compared to those of their branched analogues.

Contrast agents with high relaxivity are needed to increase the sensitivity of magnetic resonance imaging (MRI) for novel clinical and research applications. For this reason, polymeric structures containing multiple Gd(III) chelates are of current interest. Described in this communication are the syntheses and characterization of a glycopolymer derived from L-tartaric acid, Gd 4(H2O), as well as a low molecular weight compound, Gd 10(H2O), that models the Gd(III) chelate structure in the repeat unit of polymer Gd 4(H2O). Luminescence lifetime measurements in H2O and D2O for Eu(III) analogues of Gd 4(H2O) and Gd 10(H2O) [named Eu 4(H2O) and Eu 10(H2O)] reveal that the lanthanide in both structures likely has one water ligand in the primary coordination sphere. The relaxivity of the model chelate Gd 10(H 2O) at 400 MHz and 310 K was determined to be 4.7 mmol (-1).s (-1), representing a nearly 50% increase over Magnevist (3.2 mmol (-1).s (-1)). Relaxivity values on a per Gd basis for the polymeric structure Gd 4(H2O) prepared at two degrees of polymerization, n = 12 and 19, are similar, but slightly lower than Gd 10(H2O) (4.4 mmol (-1).s (-1) and 4.5 mmol (-1).s (-1), respectively). However, their molecular relaxivities of 51 mmol (-1).s (-1) and 80 mmol (-1).s (-1), respectively, provide a substantial increase over that of Magnevist.

Exploring the development of nonviral nucleic acid delivery vectors with progressive, specific, and novel designs in molecular architecture is a fundamental way to investigate how aspects of chemical and physical structure impact the transfection process. In this study, macromolecules comprised of a four-arm star poly(ethylene glycol) and termini modified with one of five different heparin binding peptides have been investigated for their ability to bind, compact, and deliver DNA to mammalian cells in vitro. These new delivery vectors combine a PEG-derived stabilizing moiety with peptides that exhibit unique cell-surface binding ability in a molecular architecture that permits multivalent presentation of the cationic peptides. Five peptide sequences of varying heparin binding affinity were studied; each was found to sufficiently bind heparin for biological application. Additionally, the macromolecules were able to bind and compact DNA into particles of proper size for endocytosis. In biological studies, the PEG-star peptides displayed a range of toxicity and transfection efficiency dependent on the peptide identity. The vectors equipped with peptides of highest heparin binding affinity were found to bind DNA tightly, increase levels of cellular internalization, and display the most promising transfection qualities. Our results suggest heparin binding peptides with specific sequences hold more potential than nonspecific cationic polymers to optimize transfection efficiency while maintaining cell viability. Furthermore, the built-in multivalency of these macromolecules may allow simultaneous binding of both DNA at the core of the polyplex and heparan sulfate on the surface of the cell. This scheme may facilitate a bridging transport mechanism, tethering DNA to the surface of the cell and subsequently ushering therapeutic nucleic acids into the cell. This multivalent star shape is therefore a promising architectural feature that may be exploited in the design of future polycationic gene delivery vectors.

The study of polymeric nucleic acid delivery vehicles has recently grown because of their promise for many biomedical applications. In an effort to understand how the chemical traits of polymers affect the biological mechanisms of nucleic acid delivery, we have calculated the buffering capacity in the physiological pH range of a series of 10 poly(glycoamidoamine)s with systematic structural variations in the amine stoichiometry (from 1 to 4), carbohydrate moiety (d-glucarate or l-tartarate), and amine spacer (ethylene or butylene) within their repeat units. In addition, we have compared the buffering capacity of these polymeric vectors to their polyplex (polymer-DNA complex) stability, cellular internalization, and gene expression profiles to understand the parameters that are important for increasing gene delivery efficiency. The results indicate that the buffering capacity is not always the primary characteristic that determines the gene delivery efficiency for all the poly(glycoamidoamine)s. We have found that the buffering capacity may affect the gene delivery efficiency only when analogous structures containing the same number of amines but different carbohydrates are compared. We reveal that the cellular internalization is the key step in the gene delivery process with systems containing different amine stoichiometry. Also, increasing the number of methylene groups between the secondary amines increases toxicity to a large degree. This systematic and heuristic approach of studying the correlations between structural variables and gene delivery efficiency will facilitate the development of effective synthetic vectors for specific nucleic acid delivery applications.

Polymeric vectors have potential as nucleic acid delivery vehicles for novel gene therapy and oligonucleotide treatments for cardiovascular disease. In this report, poly(glycoamidoamine)s that contain four secondary amines and either two or four hydroxyl units in the repeat unit with D-glucarate (D4), meso-galactarate (G4), D-mannarate (M4), and l-tartarate (T4) stereochemistry have been investigated for their pDNA-binding affinity, DNase protection effect, and polyplex stability in the presence of salt and serum. Also, the luciferase gene delivery and cellular internalization of polyplexes formed with these polymers have been investigated with rat cardiomyoblast [H9c2(2-1)] cells. The results demonstrate that the number of hydroxyl groups and the stereochemistry affect the biological properties. Polymers T4 and G4 have higher pDNA binding affinity, protect pDNA from nuclease degradation, and do not release pDNA in the presence of serum. Polymers D4 and M4 bind pDNA with lower affinity, which allows for some pDNA degradation and release in the presence of serum. Although T4 forms the most stable polyplexes, vector G4 reveals the highest luciferase gene expression in serum-free media and the greatest cellular internalization of fluorescein-labeled pDNA both in serum-free and serum-supplemented media. The results of these studies indicate that the polymer-DNA binding affinity, nuclease protection capability, and polyplex stability are important parameters to facilitate effective pDNA delivery with poly(glycoamidoamine)s in cultured cardiomyoblast cells. The carbohydrate type also plays an important role to increase cellular uptake and gene expression where the polymer with the galactarate stereochemistry (in G4) is found to be the most effective vector for pDNA delivery to cardiomyoblast cells in vitro.

Cationic polymers have the ability to bind plasmid DNA (pDNA) through electrostatic interactions and condense it into particles that can be readily endocytosed by cultured cells. The effects that polycation structure has on toxicity and gene delivery efficiency are investigated here by synthesizing a series of amidine-based polycations that contain the carbohydrates d-trehalose and beta-cyclodextrin (CD) within the polycation backbone. The carbohydrate size (trehalose vs CD) and its distance from the charge centers affect the gene delivery behavior in BHK-21 cells. It is found that as the charge center is further removed from the carbohydrate unit, the toxicity is increased. Also, as the size of the carbohydrate moiety is enlarged from trehalose to beta-cyclodextrin, the toxicity is reduced. The absence of a carbohydrate in the polycation produces high toxicity. All carbohydrate polycations transfect BHK-21 cells to approximately the same level of gene expression.

Recent polycation structure-gene delivery studies reveal that subtle changes in the molecular structure of polycations have substantial influences on DNA-binding and condensation and on in vitro toxicity and gene delivery efficiency. In Part 1 of this structure-property study using carbohydrate-containing polycations (1), it is demonstrated that as the amidine charge center is removed further from the carbohydrate unit within the polycation structure, the toxicity increases. Inclusion of larger carbohydrate species within the polycation backbone also reduces the toxicity. Here, the effect that polycation charge center type has on toxicity and gene delivery efficiency is investigated. A series of quaternary ammonium polycations containing N,N,N',N'-tetramethyl-1,6-hexanediamine, d-trehalose, and beta-cyclodextrin are synthesized in order to elucidate the effects of charge center type (by comparison to the data given in Part 1) on gene delivery. In all cases, it is found that the quaternary ammonium analogues exhibit lower gene expression values and similar toxicities to their amidine analogues. Additionally, transfection experiments conducted in the presence of chloroquine reveal increased gene expression from quaternary ammonium containing polycations and not from their amidine analogues.