Search

Background: This review aimed to analyze the relapse in orthognathic surgery. Methods: PubMed, Scopus, and Web of Science databases were used to find papers that matched our topic dating from 1 January 2012 up to November 2022. Inclusion criteria were (1) human studies, (2) open access studies, (3) studies concerning the correlation between orthognathic surgery and relapse. Exclusion criteria were: (1) in vitro or animal studies, (2) off-topic studies, (3) reviews, (4) other languages than English. Results: A total of 482 results were obtained resulting in 323 publications after duplicate removal (158). After screening and eligibility phases 247 records were excluded: 47 reviews, 5 in animals, 35 in vitro, 180 off-topic. The authors successfully retrieved the remaining 78 papers and evaluated their eligibility. A total of 14 studies from these were ultimately included in the review. Conclusion: Using cephalometric examinations and digital study models, these studies reveal that the relapse after orthognathic surgery is an event that occurs in most of the cases. The limitation of our research is that most of the studies are retrospective and use small sample sizes. A future research goal should be to conduct long-term clinical trials with larger numbers of samples. [ABSTRACT FROM AUTHOR]

The success of deep machine learning (DML) models in gaming and robotics has increased its trial in clinical and public healthcare solutions. In applying DML to healthcare problems, a special challenge of inadequate electrical energy and computing resources exists in regional and developing areas of the world. In this paper, we evaluate and report the computational and predictive performance design trade-offs for four candidate deep learning models that can be deployed for rapid malaria case finding. The goal is to maximise malaria detection accuracy while reducing computing resource and energy consumption. Based on our experimental results using a blood smear malaria test data set, the quantised versions of Basic Convolutional Neural Network (B-CNN) and MobileNetV2 have better malaria detection performance (up to 99% recall), lower memory usage (2MB 8-bit quantised model) and shorter inference time (33-95 microseconds on mobile phones) than VGG-19 fine-tuned and quantised models. Hence, we have implemented MobileNetV2 in our mobile application as it has even a lower memory requirement than B-CNN. This work will help to counter the negative effects of COVID-19 on the previous successes towards global malaria elimination. [ABSTRACT FROM AUTHOR]

Microorganisms have a significant influence on human activities and health, and consequently, there is high demand to develop automated, sensitive, and rapid methods for their detection. These methods might be applicable for clinical, industrial, and environmental applications. Although different techniques have been suggested and employed for the detection of microorganisms, and the majority of these methods are not cost effective and suffer from low sensitivity and low specificity, especially in mixed samples. This paper presents a comprehensive review of microbiological techniques and associated challenges for bioengineering researchers with an engineering background. Also, this paper reports on recent technological advances and their future prospects for a variety of microbiological applications. [ABSTRACT FROM AUTHOR]

Background: Facial recognition systems utilizing deep learning techniques can improve the accuracy of facial recognition technology. However, it remains unclear whether these systems should be available for patient identification in a hospital setting. Methods: We evaluated a facial recognition system using deep learning and the built-in camera of an iPad to identify patients. We tested the system under different conditions to assess its authentication scores (AS) and determine its efficacy. Our evaluation included 100 patients in four postures: sitting, supine, and lateral positions, with and without masks, and under nighttime sleeping conditions. Results: Our results show that the unmasked certification rate of 99.7% was significantly higher than the masked rate of 90.8% (p < 0.0001). In addition, we found that the authentication rate exceeded 99% even during nighttime sleeping. Furthermore, the facial recognition system was safe and acceptable for patient identification within a hospital environment. Even for patients wearing masks, we achieved a 100% success rate for authentication regardless of illumination if they were sitting with their eyes open. Conclusions: This is the first systematical study to evaluate facial recognition among hospitalized patients under different situations. The facial recognition system using deep learning for patient identification shows promising results, proving its safety and acceptability, especially in hospital settings where accurate patient identification is crucial. [ABSTRACT FROM AUTHOR]

This randomized prospective clinical study aims to analyze the differences between the computer-assisted planned implant position and the clinically realized implant position using dynamic navigation. In the randomized prospective clinical study, 30 patients were recruited, of whom 27 could receive an implant (BLT, Straumann Institut AG, Basel, Switzerland) using a dynamic computer-assisted approach. Patients with at least six teeth in their jaws to be implanted were included in the study. Digital planning was performed using cone beam tomography imaging, and the visualization of the actual situation was carried out using an intraoral scan. Two different workflows with differently prepared reference markers were performed with 15 patients per group. The actual clinically achieved implant position was recorded with scan bodies fixed to the implants and an intraoral scan. The deviations between the planned and realized implant positions were recorded using evaluation software. The clinical examinations revealed no significant differences between procedures A and B in the mesiodistal, buccolingual and apicocoronal directions. For the mean angular deviation, group B showed a significantly more accurate value of 2.7° (95% CI 1.6–3.9°) than group A, with a value of 6.3° (95% CI 4.0–8.7°). The mean 3D deviation at the implant shoulder was 2.35 mm for workflow A (95% CI 1.92–2.78 mm) and 1.62 mm for workflow B (95% CI 1.2–2.05 mm). Workflow B also showed significantly higher accuracy in this respect. Similar values were determined at the implant apex. The clinical examination shows that sufficiently accurate implant placement is possible with the dynamic navigation system used here. The use of different workflows sometimes resulted in significantly different accuracy results. The data of the present study are comparable with the published findings of other static and dynamic navigation procedures. [ABSTRACT FROM AUTHOR]

Autologous micrografting technology (AMT®) involves the use of autologous micrografts to stimulate/enhance the repair of damaged tissue. This study assessed the efficacy and safety of the AMT® procedure in patients with early stages of knee osteoarthritis. Briefly, the AMT® procedure involved extraction of auricular cartilage, disaggregation using the Rigeneracons® SRT in 4.0 mL of saline solution, and injection of the disaggregated micrografts into the external femorotibial compartment area of the affected knee. Ten patients (4 men, 6 women; age range: 37–84 years) were included in the study. In all patients, there was a steady improvement in knee instability, pain, swelling, mechanical locking, stair climbing, and squatting at 1- and 6-months post-procedure. Improvement in mobility was observed as early as 3 weeks post-procedure in 2 patients. Significant improvements were seen in mean scores of all five subscales of Knee Injury and Osteoarthritis Outcome Score (KOOS [KOOS symptoms, KOOS pain, KOOS ADL, KOOS sport and recreation, and KOOS quality-of-life]) between pre-procedure and 1- and 6-months post-procedure (all p ≤ 0.05). Autologous auricular cartilage micrografts obtained by AMT® procedure (using Rigenera® technology) is an effective and safe protocol in the treatment of early stage knee osteoarthritis. These encouraging findings need to be validated in a larger patient population and in a randomized clinical trial (RCT). [ABSTRACT FROM AUTHOR]

In healthy skin, vectorial ion transport gives rise to a transepithelial potential which directly impacts many physiological aspects of skin function. A wound is a physical defect that breaches the epithelial barrier and changes the electrochemical environment of skin. Electroceutical dressings are devices that manipulate the electrochemical environment, host as well as microbial, of a wound. In this review, electroceuticals are organized into three mechanistic classes: ionic, wireless, and battery powered. All three classes of electroceutical dressing show encouraging effects on infection management and wound healing with evidence of favorable impact on keratinocyte migration and disruption of wound biofilm infection. This foundation sets the stage for further mechanistic as well as interventional studies. Successful conduct of such studies will determine the best dosage, timing, and class of stimulus necessary to maximize therapeutic efficacy. [ABSTRACT FROM AUTHOR]

Background: Flat Magnetic Stimulation (FMS) is characterized by a stimulation generated by electromagnetic fields with a homogenous profile. One possible application is the treatment of stress urinary incontinence (SUI). We aimed to compare the objective, subjective, quality of life, and instrumental outcomes in women with SUI not eligible for surgery undergoing either FMS or pelvic floor muscle training (PFMT). Methods: This was a prospective interventional study. After proper counseling, patients with isolated SUI were divided according to their treatment of choice into FMS and PFMT groups. At baseline and after treatment, patients completed the International Consultation on Incontinence Questionnaire-Short Form, the Female Sexual Function Index, and the Incontinence Impact Questionnaire, and volumetric measurement of the urethral rhabdosphincter (RS) was performed. The Patient Global Impression of Improvement questionnaire and stress test defined subjective and objective cure rates, respectively. Results: We observed improvements in urinary-related quality of life scores and an increase in RS volume after FMS compared to baseline. All these outcomes were significantly better compared to women who underwent PFMT. Conclusion: Our study demonstrated that FMS is a safe and effective conservative option for SUI management in terms of objective and subjective cure rates. [ABSTRACT FROM AUTHOR]

The prevalence of osteoarthritis (OA), a degenerative disorder of joints, has substantially increased in recent years. Its key pathogenic hallmarks include articular cartilage destruction, synovium inflammation, and bone remodeling. However, treatment outcomes are unsatisfactory. Until recently, common therapy methods, such as analgesic and anti-inflammatory treatments, were aimed to treat symptoms that cannot be radically cured. Mesenchymal stem cells (MSCs), i.e., mesoderm non-hematopoietic cells separated from bone marrow, adipose tissue, umbilical cord blood, etc., have been intensively explored as an emerging technique for the treatment of OA over the last few decades. According to existing research, MSCs may limit cartilage degradation in OA by interfering with cellular immunity and secreting a number of active chemicals. This study aimed to examine the potential mechanism of MSCs in the treatment of OA and conduct a thorough review of both preclinical and clinical data. [ABSTRACT FROM AUTHOR]

Stem cell therapy for ischemic stroke holds great promise for the treatment of neurological impairment and has moved from the laboratory into early clinical trials. The mechanism of action of stem cell therapy includes the bystander effect and cell replacement. The bystander effect plays an important role in the acute to subacute phase, and cell replacement plays an important role in the subacute to chronic phase. Intraarterial (IA) transplantation is less invasive than intraparenchymal transplantation and can provide more cells in the affected brain region than intravenous transplantation. However, transplanted cell migration was reported to be insufficient, and few transplanted cells were retained in the brain for an extended period. Therefore, the bystander effect was considered the main mechanism of action of IA stem cell transplantation. In most clinical trials, IA transplantation was performed during the acute and subacute phases. Although clinical trials of IA transplantation demonstrated safety, they did not demonstrate satisfactory efficacy in improving patient outcomes. To increase efficacy, increased migration of transplanted cells and production of long surviving and effective stem cells would be crucial. Given the lack of knowledge on this subject, we review and summarize the mechanisms of action of transplanted stem cells and recent advancements in preclinical and clinical studies to provide information and guidance for further advancement of acute/subacute phase IA stem cell transplantation therapy for ischemic stroke. [ABSTRACT FROM AUTHOR]

Distraction osteogenesis (DO) is a reconstruction method for repairing bone deficiencies in the oral and maxillofacial area. Manual DO techniques have shown the functionality of the DO method for bone tissue reconstruction. The DO method can improve treatment conditions, as well as the quality of the reconstructed bone, compared with conventional techniques. Recently, continuous DO devices have been proposed to enable an automatic DO process while using a continuous force for moving the bone segment (BS). Animal studies and clinical trials have shown the successful application of continuous distractors in terms of improving DO factors, including rate and rhythm. The continuous DO technique can shorten the treatment time and enhance the quality of the regenerated tissue. However, the developed continuous distractors are yet to be used in human applications. In this study, by combining motor-driven and hydraulic techniques, a hybrid distractor is proposed. The hybrid distractor is capable of generating a continuous distraction force while controlling the position of the BS in a linear vector, with a high positioning accuracy. Results of modelling and experimental study revealed that the proposed hybrid distractor met all required factors for enabling a continuous DO procedure in humans. The proposed distractor is capable of eliminating the drawbacks of exiting techniques in terms of generating and transferring a controlled distraction force to the BS. The wireless control, as well as the small size of the device, makes this device a suitable solution for use in the reconstruction of bone defects in the maxillofacial area in humans. [ABSTRACT FROM AUTHOR]

Bone tissue engineering (BTE) is a promising alternative to repair bone defects using biomaterial scaffolds, cells, and growth factors to attain satisfactory outcomes. This review targets the fabrication of bone scaffolds, such as the conventional and electrohydrodynamic techniques, for the treatment of bone defects as an alternative to autograft, allograft, and xenograft sources. Additionally, the modern approaches to fabricating bone constructs by additive manufacturing, injection molding, microsphere-based sintering, and 4D printing techniques, providing a favorable environment for bone regeneration, function, and viability, are thoroughly discussed. The polymers used, fabrication methods, advantages, and limitations in bone tissue engineering application are also emphasized. This review also provides a future outlook regarding the potential of BTE as well as its possibilities in clinical trials. [ABSTRACT FROM AUTHOR]

Background: The objective of this systematic review is to assess the effect of the adjuvant use of platelet-rich plasma (PRP) and its type on new bone formation by anorganic bovine bone during maxillary sinus floor augmentation procedure. Methods: PubMed, Cochrane Central Register of Controlled Trials, and Ovid databases were searched for relevant studies published up to 16 September 2021. Randomized clinical trials (RCTs) and non-randomized controlled clinical trials (CCTs) that reported data on the new bone formation (measured by histomorphometric analysis) were considered. Risk of bias and quality assessment of included studies were evaluated following the Cochrane Handbook for Systematic Reviews of Interventions and the Risk Of Bias In Non-randomised Studies of Interventions (ROBINS-I) tool. Strength of evidence was assessed following the approach of the Agency for Healthcare Research and Quality (AHRQ) through its evidence-based practice center (AHRQ EPC). The meta-analysis was based on the primary outcome of newly formed bone, for which the standard mean difference was calculated. Results: After the application of eligibility criteria, six clinical trials (three RCTs and three CCTs) covering 85 maxillary sinus floor elevation procedures were included. The pooled new bone formation value for PRP was 1.67 (95% CI: −0.15 to 3.49; I2: 86%), indicating the absence of significant effect. Plasma rich in growth factors (PRGF) was the pure PRP tested in five of the included studies. When sub-group (type of PRP) meta-analysis was performed, significantly higher new bone formation was observed in the PRGF group [2.85 (95% CI: 0.07 to 5.64; I2: 88%)] in comparison to the control group. Conclusions: A beneficial effect on new bone formation after maxillary sinus floor elevation can be obtained when anorganic bovine bone is mixed with PRGF. [ABSTRACT FROM AUTHOR]

Human mesenchymal stem/stromal cells (hMSCs) have been investigated and proven to be a well-tolerated, safe therapy for a variety of indications, as shown by over 900 registered hMSC-based clinical trials. To meet the commercial demand for clinical manufacturing of hMSCs, production requires a scale that can achieve a lot size of ~100B cells, which requires innovative manufacturing technologies such as 3D bioreactors. A robust suspension bioreactor process that can be scaled-up to the relevant scale is therefore crucial. In this study, we developed a fed-batch, microcarrier-based bioreactor process, which enhances media productivity and drives a cost-effective and less labor-intensive hMSC expansion process. We determined parameter settings for various stages of the culture: inoculation, bioreactor culture, and harvest. Addition of a bioreactor feed, using a fed-batch approach, was necessary to replenish the mitogenic factors that were depleted from the media within the first 3 days of culture. Our study resulted in an optimized hMSC culture protocol that consistently achieved hMSC densities between 2 × 105–6 × 105 cells/mL within 5 days with no media exchange, maintaining the final cell population doubling level (PDL) at 16–20. Using multiple hMSC donors, we showed that this process was robust and yielded hMSCs that maintained expansion, phenotypic characteristic, and functional properties. The developed process in a vertical-wheel suspension bioreactor can be scaled to the levels needed to meet commercial demand of hMSCs. [ABSTRACT FROM AUTHOR]