Search

Hydrogels of TEMPO-oxidized nanocellulose were stabilized for dry-jet wet spinning using a shell of cellulose dissolved in 1,5-diazabicyclo[4.3.0]non-5-enium propionate ([DBNH][CO2Et]), a protic ionic liquid (PIL). Coagulation in an acidic water bath resulted in continuous core-shell filaments (CSFs) that were tough and flexible with an average dry (and wet) toughness of similar to 11 (2) MJ.m(-3) and elongation of similar to 9 (14) %. The CSF morphology, chemical composition, thermal stability, crystallinity, and bacterial activity were assessed using scanning electron microscopy with energy-dispersive X-ray spectroscopy, liquid-state nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, pyrolysis gas chromatography-mass spectrometry, wide-angle X-ray scattering, and bacterial cell culturing, respectively. The coaxial wet spinning yields PIL-free systems carrying on the surface the cellulose II polymorph, which not only enhances the toughness of the filaments but facilities their functionalization.

Self-assembled micrometer-scale vesicles composed of lamellar phase forming amphiphiles are useful as chemical microreactors, as minimal artificial cells, as protocell mimics for studies of the origins of life, and as vehicles for the targeted delivery of drugs. Given their varied uses, discovery of a universal mechanism that is simple, rapid, and that produces vesicles from a large variety of amphiphiles with different chemical and physical properties at high yield is extremely desirable. Here we show that cellulose, in the form of cellulose paper, facilitates the assembly of membranous vesicles 5-20 μm in diameter from scientifically and technologically important amphiphiles of diverse chemical structures and functionality such as fatty acids (fatty acid vesicles), amphiphilic diblock copolymers, and amphiphilic triblock copolymers (polymersomes). Assembly of vesicles occurred within 90 min of placing the amphiphile-coated cellulose paper into aqueous solutions. Varying thermal and chemical conditions, however, are required for the high-yield assembly of vesicles from the different amphiphiles. The vesicles, when attached to cellulose fibers, have membranes that remain unsealed. This topological characteristic of the vesicles grown on paper allowed the scalable separation of the process of growth from the process of loading cargo (temporally decoupled growth and loading). We demonstrate a temporally decoupled process to rapidly produce large quantities of protein-loaded polymersomes on the benchtop by using high temperatures to accelerate the growth of the polymersomes and subsequently milder temperatures during diffusive loading of the protein cargo.

Nanopapers formed from aqueous dispersions of cellulose nanofibrils (CNFs) combine stiffness, strength, and toughness. Yet, delicate interactions operate between the CNFs during nanopaper formation and mechanical deformation. We unravel in detail how counterions, being either of the organic alkyl ammonium kind (NR4+) or of the earth metal series (Li+, Na+, Cs+), need to be chosen to achieve outstanding combinations of stiffness, strength, and toughness, extending to previously unreached territories. We relate structure formation processes in terms of colloidal stabilization to nanostructural details such as porosity and ability for swelling, as well as to interfibrillar interactions in bulk and macroscale mechanical properties. We demonstrate that our understanding also leads to new levels of ductility in bioinspired CNF/polymer nanocomposites at high levels of reinforcements. These results contribute to future rational design of CNF-based high-performance materials.

To expand the use of renewable materials, paper products with superior mechanical and optical properties are needed. Although beating, bleaching, and additives are known to improve industrially produced Kraft pulp papers, properties are limited by the quality of the fibers. While the use of nanocellulose has been shown to significantly increase paper properties, the current cost associated with their production has limited their industrial relevance. Here, using a simple mild peracetic acid (PAA) delignification process on spruce, we produce hemicellulose-rich holocellulose fibers (28.8 wt %) with high intrinsic strength (1200 MPa for fibers with microfibrillar angle smaller than 10°). We show that PAA treatment causes less cellulose/hemicellulose degradation and better preserves cellulose nanostructure in comparison to conventional Kraft pulping. High-density holocellulose papers with superior mechanical properties (Young's modulus of 18 GPa and ultimate strength of 195 MPa) are manufactured using a water-based hot-pressing process, without the use of beating or additives. We propose that the preserved hemicelluloses act as "glue" in the interfiber region, improving both mechanical and optical properties of papers. Holocellulose fibers may be affordable and applicable candidates for making special paper/composites where high mechanical performance and/or optical transmittance are of interest.

Toward our goal of scalable, antimicrobial materials based on photodynamic inactivation, paper sheets comprised of photosensitizer-conjugated cellulose fibers were prepared using porphyrin and BODIPY photosensitizers, and characterized by spectroscopic (infrared, UV-vis diffuse reflectance, inductively coupled plasma optical emission) and physical (gel permeation chromatography, elemental, and thermal gravimetric analyses) methods. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-2913), vancomycin-resistant Enterococcus faecium (ATCC-2320), Acinetobacter baumannii (ATCC-19606), Pseudomonas aeruginosa (ATCC-9027), and Klebsiella pneumoniae (ATCC-2146). Our best results were achieved with a cationic porphyrin-paper conjugate, Por((+))-paper, with inactivation upon illumination (30 min, 65 ± 5 mW/cm(2), 400-700 nm) of all bacterial strains studied by 99.99+% (4 log units), regardless of taxonomic classification. Por((+))-paper also inactivated dengue-1 virus (99.995%), influenza A (∼ 99.5%), and human adenovirus-5 (∼ 99%). These results demonstrate the potential of cellulose materials to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

The properties of paper sheets can be tuned by adjusting the surface or bulk chemistry using functional polymers that are applied during (online) or after (offline) papermaking processes. In particular, polymers are widely used to enhance the mechanical strength of the wet state of paper sheets. However, the mechanical strength depends not only on the chemical nature of the polymeric additives but also on the distribution of the polymer on and in the lignocellulosic paper. Here, we analyze the photochemical attachment and distribution of hydrophilic polydimethylacrylamide-co-methacrylate-benzophenone P(DMAA-co-MABP) copolymers with defined amounts of photoreactive benzophenone moieties in model paper sheets. Raman microscopy was used for the unambiguous identification of P(DMAA-co-MABP) and cellulose specific bands and thus the copolymer distribution within the cellulose matrix. Two-dimensional Raman spectral maps at the intersections of overlapping cellulose fibers document that the macromolecules only partially surround the cellulose fibers, favor to attach to the fiber surface, and connect the cellulose fibers at crossings. Moreover, the copolymer appears to accumulate preferentially in holes, vacancies, and dips on the cellulose fiber surface. Correlative brightfield, Raman, and confocal laser scanning microscopy finally reveal a reticular three-dimensional distribution of the polymer and show that the polymer is predominately deposited in regions of high capillarity (i.e., in proximity to fine cellulose fibrils). These data provide deeper insights into the effects of paper functionalization with a copolymer and aid in understanding how these agents ultimately influence the local and overall properties of paper.

One of the major, but often overlooked, challenges toward high end applications of nanocelluloses is to maintain their high mechanical properties under hydrated or even fully wet conditions. As such, permanent covalent cross-linking or surface hydrophobization are viable approaches, however, the former may hamper processability and the latter may have adverse effect on interfibrillar bonding and resulting material strength. Here we show a concept based on physical cross-linking of cellulose nanofibers (CNF, also denoted as microfibrillated cellulose, MFC, and, nanofibrillated cellulose, NFC) with chitosan for the aqueous preparation of films showing high mechanical strength in the wet state. Also, transparency (∼70–90% in the range 400–800 nm) is achieved by suppressing aggregation and carefully controlling the mixing conditions: Chitosan dissolves in aqueous medium at low pH and under these conditions the CNF/chitosan mixtures form easily processable hydrogels. A simple change in the environmental conditions(i.e., an increase of pH) reduces hydration of chitosan promoting multivalent physical interactions between CNF and chitosan over those with water, resulting effectively in cross-linking. Wet water-soaked films of CNF/chitosan 80/20 w/w show excellent mechanical properties, with an ultimate wet strength of 100 MPa (with corresponding maximum strain of 28%) and a tensile modulus of 4 and 14 GPa at low (0.5%) and large (16%) strains, respectively. More dry films of similar composition display strength of 200 MPa with maximum strain of 8% at 50% air relative humidity. We expect that the proposed, simple concept opens new pathways toward CNF-based material utilization in wet or humid conditions, which has still remained a challenge.

Nonwoven membranes based on electrospun fibers are of great interest in applications such as biomedical, filtering, and protective clothing. The poor mechanical performance is a limitation, as is some of the electrospinning solvents. To address these problems, porous nonwoven membranes based on nanofibrillated cellulose (NFC) modified by a hydroxyethyl cellulose (HEC) polymer coating are prepared. NFC/HEC aqueous suspensions are subjected to simple vacuum filtration in a paper-making fashion, followed by supercritical CO(2) drying. These nonwoven nanocomposite membranes are truly nanostructured and exhibit a nanoporous network structure with high specific surface area, as analyzed by nitrogen adsorption and FE-SEM. Mechanical properties evaluated by tensile tests show high strength combined with remarkably high strain to failure of up to 55%. XRD analysis revealed significant fibril realignment during tensile stretching. After postdrawing of the random mats, the modulus and strength are strongly increased. The present preparation route uses components from renewable resources, is environmentally friendly, and results in permeable membranes of exceptional mechanical performance.

Nacre-mimicking hybrids of high inorganic content (>50 wt %) tend to show low strain-to-failure. Therefore, we prepared clay nanopaper hybrid composite montmorillonite platelets in a continuous matrix of nanofibrillated cellulose (NFC) with the aim of harnessing the intrinsic toughness of fibrillar networks. Hydrocolloid mixtures were used in a filtration approach akin to paper processing. The resulting multilayered structure of the nanopaper was studied by FE-SEM, FTIR, and XRD. Uniaxial stress−strain curves measured in tension and thermal analysis were carried out by DMTA and TGA. In addition, fire retardance and oxygen permeability characteristics were measured. The continuous NFC matrix is a new concept and provides unusual ductility to the nanocomposite, allowing inorganic contents as high as 90% by weight. Clay nanopaper extends the property range of cellulose nanopaper and is of interest in self-extinguishing composites and in oxygen barrier layers.

International audience; Brown lines were generated at the wet-dry interface on Whatman paper No. 1 by suspending the sheet vertically in deionized water. Formic acid and acetic acid were quantified in three areas of the paper defined by the wet-dry boundary (above, below, and at the tideline) using capillary zone electrophoresis with indirect UV detection. Their concentration increased upon accelerated aging of the paper and was highest in the tideline. The hydroperoxides have been quantified using reverse phase high performance liquid chromatography with UV detection based on the determination of triphenylphosphine oxide produced from the reaction with triphenylphos-phine, and their highest concentration was found in the tideline as well. For the first time, it was shown that various types of hydroperoxides were present, water-soluble and non-water-soluble, most probably in part hydroperoxide functionalized cellulose. After accelerated aging, a significant increase in hydroperoxide concentration was found in all the paper areas. The molar masses of cellulose determined using size-exclusion chromatography with multiangle light scattering detection showed that, upon aging, cellulose degraded significantly more in the tideline area than in the other areas of the paper. The area below the tideline was more degraded than the area above. A kinetic study of the degradation of cellulose allowed determining the constants for glycosidic bond breaking in each of the areas of the paper.

Cellulose nanofibrils offer interesting potential as a native fibrous constituent of mechanical performance exceeding the plant fibers in current use for commercial products. In the present study, wood nanofibrils are used to prepare porous cellulose nanopaper of remarkably high toughness. Nanopapers of different porosities and from nanofibrils of different molar mass are prepared. Uniaxial tensile tests are performed and structure−property relationships are discussed. The high toughness of highly porous nanopaper is related to the nanofibrillar network structure and high mechanical nanofibril performance. Also, molar mass correlates with tensile strength. This indicates that nanofibril fracture controls ultimate strength. Furthermore, the large strain-to-failure means that mechanisms, such as interfibril slippage, also contributes to inelastic deformation in addition to deformation of the nanofibrils themselves.

Hydrolysis of cellulose in Whatman no. 42 cotton-based paper was studied using gel permeation chromatography (GPC), electrospray ionization-mass spectrometry (ESI-MS), and uniaxial tensile testing to understand the course and kinetics of the reaction. GPC results suggested that scission reactions passed through three stages. Additionally, the evolution of soluble oligomers in the ESI-MS data and the steady course of strength loss showed that the hydrolysis reaction occurred at a constant rate. These findings are explained with a more detailed description of the cellulose hydrolysis, which includes multiple chain scissions on amorphous segments. The breaks occur with increasing frequency near the ends of amorphous segments, where chains protrude from crystalline domains. Oligomers unattached to crystalline domains are eventually created. Late-stage reactions near the ends of amorphous segments produce a kinetic behavior that falsely suggests that hydrolysis had ceased. Monte Carlo simulations of cellulose degradation corroborated the experimental findings.