Search

Abstract: Cells are known to sense and respond to the physical properties of their environment and those of tissue scaffolds. Optimizing these cell–material interactions is critical in tissue engineering. In this work, a simple and inexpensive combinatorial platform was developed to rapidly screen three-dimensional (3D) tissue scaffolds and was applied to screen the effect of scaffold properties for tissue engineering of bone. Differentiation of osteoblasts was examined in poly(ethylene glycol) hydrogel gradients spanning a 30-fold range in compressive modulus (≈10 kPa to ≈300 kPa). Results demonstrate that material properties (gel stiffness) of scaffolds can be leveraged to induce cell differentiation in 3D culture as an alternative to biochemical cues such as soluble supplements, immobilized biomolecules and vectors, which are often expensive, labile and potentially carcinogenic. Gel moduli of ≈225 kPa and higher enhanced osteogenesis. Furthermore, it is proposed that material-induced cell differentiation can be modulated to engineer seamless tissue interfaces between mineralized bone tissue and softer tissues such as ligaments and tendons. This work presents a combinatorial method to screen biological response to 3D hydrogel scaffolds that more closely mimics the 3D environment experienced by cells in vivo. [Copyright &y& Elsevier]

Abstract: Dimethacrylate polymers and composites are seeing increased usage in orthopedics. As these applications require the material to integrate with the surrounding tissues, direct contact cytotoxicity assays should be used to assess the biocompatibility. This study utilized a combinatorial testing platform to evaluate the cell response to dimethacrylate composites with a variety of properties on a single sample. MC3T3-E1 pre-osteoblasts were cultured directly on composites with varying filler content, filler type, degree of conversion (DC), and surface topography. Cell viability, density, and area depended on an interplay of the material properties, with low DC causing a reduction in cell area but having minimal effect on cell viability, high filler content causing an increase in cell density, and filler content/type altering the surface roughness as a function of DC. The combinatorial testing platform successfully quantified the effects of numerous material properties on several aspects of the osteoblast response. [Copyright &y& Elsevier]

Abstract: We have explored the use of X-ray microcomputed tomography (μCT) for assessing cell adhesion and proliferation in polymer scaffolds. Common methods for examining cells in scaffolds include fluorescence microscopy and soluble assays for cell components such as enzymes, protein or DNA. Fluorescence microscopy is generally qualitative and cannot visualize the scaffold interior. Soluble assays quantitatively measure cell number but do not yield information on cell spatial distribution. Herein, the ability of μCT to detect cells in scaffolds was compared with fluorescence microscopy and a soluble DNA assay. Comparisons were performed using polymer scaffolds that were seeded with cells at different densities and cultured for different times. The results showed that fluorescence microscopy had better resolution than μCT and that the soluble DNA assay was approximately 5× more sensitive than μCT under the conditions tested. However, μCT was able to image through opaque scaffolds to yield quantitative 3D imaging and analysis via a single, non-invasive modality. Quantitative μCT analysis of cell penetration into scaffolds was demonstrated. Further, quantitative μCT volume analysis required that the cell density in the scaffolds be greater than 1 million cells per mL indicating that μCT is best suited for quantifying cells at relatively high density during culture in scaffolds. In sum, the results demonstrate the benefits and limitations of using μCT for 3D imaging and analysis of cell adhesion and proliferation in polymer scaffolds. [Copyright &y& Elsevier]

Abstract: The effects of co-monomer composition and irradiation time in a model two-component dimethacrylate dental resin blend were evaluated using combinatorial methods to determine the degree of methacrylate conversion and resulting mechanical properties. 2-Dimensional gradient samples varying in monomer composition and light exposure time were fabricated. The conversion was measured using near infrared spectroscopy (NIR) and the mechanical properties (i.e., hardness and elastic modulus) were determined using nanoindentation via the continuous stiffness method. An excellent correlation was observed between the reaction conversion and mechanical properties for the cross-linked networks. The methacrylate conversion ranged from 40% to 85% and the mechanical properties increased over two orders of magnitude over this conversion range. The ultimate reaction conversion and mechanical properties depended on both the co-monomer composition and cure time. [Copyright &y& Elsevier]

Abstract: Nanofiber scaffolds are effective for tissue engineering since they emulate the fibrous nanostructure of native extracellular matrix (ECM). Although electrospinning has been the most common approach for fabricating nanofiber scaffolds, airbrushing approaches have also been advanced for making nanofibers. For airbrushing, compressed gas is used to blow polymer solution through a small nozzle which shears the polymer solution into fibers. Our goals were 1) to assess the versatility of airbrushing, 2) to compare the properties of airbrushed and electrospun nanofiber scaffolds and 3) to test the ability of airbrushed nanofibers to support stem cell differentiation. The results demonstrated that airbrushing could produce nanofibers from a wide range of polymers and onto a wide range of targets. Airbrushing was safer, 10-fold faster, 100-fold less expensive to set-up and able to deposit nanofibers onto a broader range of targets than electrospinning. Airbrushing yielded nanofibers that formed loosely packed bundles of aligned nanofibers, while electrospinning produced un-aligned, single nanofibers that were tightly packed and highly entangled. Airbrushed nanofiber mats had larger pores, higher porosity and lower modulus than electrospun mats, results that were likely caused by the differences in morphology (nanofiber packing and entanglement). Airbrushed nanofiber scaffolds fabricated from 4 different polymers were each able to support osteogenic differentiation of primary human bone marrow stromal cells (hBMSCs). Finally, the differences in airbrushed versus electrospun nanofiber morphology caused differences in hBMSC shape where cells had a smaller spread area and a smaller volume on airbrushed nanofiber scaffolds. These results highlight the advantages and disadvantages of airbrushing versus electrospinning nanofiber scaffolds and demonstrate that airbrushed nanofiber scaffolds can support stem cell differentiation. [Copyright &y& Elsevier]

Abstract: Proliferation and differentiation of cells are known to be influenced by the physical properties of the extracellular environment. Previous studies examining biophysics underlying cell response to matrix stiffness utilized a two-dimensional (2D) culture format, which is not representative of the three-dimensional (3D) tissue environment in vivo. We report on the effect of 3D matrix modulus on human bone marrow stromal cell (hBMSC) differentiation. hBMSCs underwent osteogenic differentiation in poly(ethylene glycol) hydrogels of all modulus (300-fold modulus range, from 0.2 kPa to 59 kPa) in the absence of osteogenic differentiation supplements. This osteogenic differentiation was modulus-dependent and was enhanced in stiffer gels. Osteogenesis in these matrices required integrin-protein ligation since osteogenesis was inhibited by soluble Arginine-Glycine-Aspartate-Serine peptide, which blocks integrin receptors. Immunostained images revealed lack of well-defined actin filaments and microtubules in the encapsulated cells. Disruption of mechanosensing elements downstream of integrin binding that have been identified from 2D culture such as actin filaments, myosin II contraction, and RhoA kinase did not abrogate hBMSC material-driven osteogenic differentiation in 3D. These data show that increased hydrogel modulus enhanced osteogenic differentiation of hBMSCs in 3D scaffolds but that hBMSCs did not use the same mechanosensing pathways that have been identified in 2D culture. [ABSTRACT FROM AUTHOR]

Abstract: The effect of blending two silk proteins, regenerated Bombyx mori fibroin and synthetic spidroin containing RGD, on silk film material structure (β-sheet content) and properties (solubility), as well as on biological response (osteoblast adhesion, proliferation and differentiation) was investigated. Although the elasticity and strength of silks make them attractive candidates for bone, ligament, and cartilage tissue engineering applications, silk proteins generally lack bioactive peptides for enhancing cell functions. Thus, a synthetic spider silk, spidroin, containing two RGD cell adhesive sequences (RGD-spidroin) was engineered. RGD-spidroin was blended with different ratios of fibroin and spun coat into films on glass coverslips. β-Sheet formation, contact angle, surface topography and RGD surface presentation were characterized and correlated with cell behavior. We found that the amount of β-sheet formation was directly related to the RGD-spidroin content of the blends after annealing, with the pure RGD-spidroin demonstrating the highest amount of β-sheet content. The increased β-sheet content improved film stability under culture conditions. A new visualization technique demonstrated that the RGD presentation on the film surface was affected by both the RGD-spidroin content and annealing conditions. It was determined that 10mass% RGD-spidroin was necessary to improve film stability and to achieve osteoblast attachment and differentiation. [Copyright &y& Elsevier]

Abstract: Current methods to determine debonding/leakage at the tooth–composite interface are qualitative or semi-quantitative. Our previous work introduced a 3D imaging technique to determine and visualize leakage and its distribution at the interface of cavity wall and composite restoration in model cavities. In this study, an automated program was developed to quantify leakage in terms of area and volume. 3D leakage distribution obtained via the image analysis program was shown to have excellent agreement with leakage visualized by dye penetration. The relationship between leakage and various material performance parameters including processability, shrinkage, stress, and shrinkage strain-rate was determined using a series of experimental composites containing different filler contents. Results indicate that the magnitude of leakage correlated well with polymerization stress, confirming the validity of the common approach utilizing polymerization stress to predict bonding durability. 3D imaging and image analysis provide insight to help understand the relations between leakage and material properties. [Copyright &y& Elsevier]

Abstract: We have developed a combinatorial method for determining optimum tissue scaffold composition for several X-ray imaging techniques. X-ray radiography and X-ray microcomputed tomography enable non-invasive imaging of implants in vivo and in vitro. However, highly porous polymeric scaffolds do not always possess sufficient X-ray contrast and are therefore difficult to image with X-ray-based techniques. Incorporation of high radiocontrast atoms, such as iodine, into the polymer structure improves X-ray radiopacity but also affects physicochemical properties and material performance. Thus, we have developed a combinatorial library approach to efficiently determine the minimum amount of contrast agent necessary for X-ray-based imaging. The combinatorial approach is demonstrated in a polymer blend scaffold system where X-ray imaging of poly(desaminotyrosyl-tyrosine ethyl ester carbonate) (pDTEc) scaffolds is improved through a controlled composition variation with an iodinated-pDTEc analog (pI2DTEc). The results show that pDTEc scaffolds must include at least 9%, 16%, 38% or 46% pI2DTEc (by mass) to enable effective imaging by microradiography, dental radiography, dental radiography through 0.75cm of muscle tissue or microcomputed tomography, respectively. Only two scaffold libraries were required to determine these minimum pI2DTEc percentages required for X-ray imaging, which demonstrates the efficiency of this new combinatorial approach for optimizing scaffold formulations. [Copyright &y& Elsevier]